15 mL of water and 10 mL of sulphuric acid are to be mixed in a beaker (i) State the method that should be followed with reason. (ii)What is this process called? -Chemistry

15 mL of water and 10 mL of sulphuric acid are to be mixed in a beaker (i) State the method that should be followed with reason. (ii)What is this process called? -Chemistry
by

1 Answer

Answer :

(i) The acid is to be added slowly in water to prevent the mixture to be splashed. The reaction is highly exothermic, therefore, constant cooling should be done. (ii)The process is called dilution.
by

Related questions

Describe an activity to observe what happens when quick lime is added to water taken in a beaker. State two important observations and name the type of reaction taking place. -Chemistry

Description : Describe an activity to observe what happens when quick lime is added to water taken in a beaker. State two important observations and name the type of reaction taking place. -Chemistry

Last Answer : Answer. Aim: To observe what happens when quicklime is added to water taken in a beaker. Materials Required:- Quicklime (calcium oxide), water, beaker.Procedure: 1. Take 5 g of calcium oxide in a ... example for each of decomposion reaction carried out with help of (i) Electricity (ii) Heat (iii)

Take a 250 mL beaker/glass tumbler. Fill half of it with water. Now carefully cut a small piece of sodium metal. Dry it using filter paper and wrap it in a small piece of cotton. Put the sodium piece wrapped in cotton into the beaker. Observe carefully. -Science

Description : Take a 250 mL beaker/glass tumbler. Fill half of it with water. Now carefully cut a small piece of sodium metal. Dry it using filter paper and wrap it in a small piece of cotton. Put the sodium piece wrapped in cotton into the beaker. Observe carefully. -Science

Last Answer : On touching the beaker, it was felt hot. The solution turns the red litmus paper to blue which shows it is basic in nature. Blue litmus paper do not show any colour change with the solution.

If there is 50 ml of water in a beaker then what is the mass?

Description : If there is 50 ml of water in a beaker then what is the mass?

Last Answer : 50 gm

Write balanced chemical equations for the following reactions: (a) Dilute sulphuric acid reacts with aluminium powder. (b) Dilute hydrochloric acid reacts with sodium carbonate. (c) Carbon dioxide is passed through lime water. -Chemistry

Description : Write balanced chemical equations for the following reactions: (a) Dilute sulphuric acid reacts with aluminium powder. (b) Dilute hydrochloric acid reacts with sodium carbonate. (c) Carbon dioxide is passed through lime water. -Chemistry

Last Answer : i hope it helped you

Which among the following stage is suitable indicator when solution of sodium carbonate is mixed with sulphuric acid ? (1) Methylene blue (2) Methyl red (3) Phenolphthaline (4) Methyl orange

Description : Which among the following stage is suitable indicator when solution of sodium carbonate is mixed with sulphuric acid ? (1) Methylene blue (2) Methyl red (3) Phenolphthaline (4) Methyl orange

Last Answer : Methyl orange

State the type of chemical reactions and chemical equations that take place in the following: (i) Magnesium wire is burnt in air. (ii) Electric current is passed through water. (iii) Ammonia and hydrogen chloride gases’are mixed. -Chemistry

Description : State the type of chemical reactions and chemical equations that take place in the following: (i) Magnesium wire is burnt in air. (ii) Electric current is passed through water. (iii) Ammonia and hydrogen chloride gases’are mixed. -Chemistry

Last Answer : This is the Answer:

Pick out the wrong statement. (A) 'Green acid' is the other name of phosphoric acid produced by the reaction of phosphate rock & sulphuric acid (B) Chemically unreactive nature of red phosphorous is due to its polymeric structure (C) Red phosphorous is the most reactive allotropic form of phosphorous (D) Red phosphorous, which is used in the manufacture of safety matches, is converted into white phosphorous by vaporisation followed by condensation

Description : Pick out the wrong statement. (A) 'Green acid' is the other name of phosphoric acid produced by the reaction of phosphate rock & sulphuric acid (B) Chemically unreactive nature of ... in the manufacture of safety matches, is converted into white phosphorous by vaporisation followed by condensation

Last Answer : (C) Red phosphorous is the most reactive allotropic form of phosphorous

In the manufacture of sulphuric acid from elemental sulphur, the following sequence of major operations is followed: (A) Furnace → converter → absorber (B) Furnace → evaporator → absorber (C) Furnace → converter → evaporator (D) Converter → furnace → absorber

Description : In the manufacture of sulphuric acid from elemental sulphur, the following sequence of major operations is followed: (A) Furnace → converter → absorber (B) Furnace → evaporator → absorber (C) Furnace → converter → evaporator (D) Converter → furnace → absorber

Last Answer : (A) Furnace → converter → absorber

When a coordination compound CoCl3.6NH3 is mixed with AgNO3, 3 moles of AgCl are precipitated per mole of the compound. Write (i) Structural formula of the complex (ii) IUPAC name of the complex -Chemistry

Description : When a coordination compound CoCl3.6NH3 is mixed with AgNO3, 3 moles of AgCl are precipitated per mole of the compound. Write (i) Structural formula of the complex (ii) IUPAC name of the complex -Chemistry

Last Answer : i) Complex so formed is: CoCl3.6NH3 + AgNO3 → [Co(NH3)6]Cl3 (ii) IUPAC name of complex is: Hexaamminecobalt (III) chloride

When a co-ordination compound CrCl3.6H2O is mixed with AgNO3, 2 moles of AgCl are precipitated per mole of the compound. Write (i) Structural formula of the complex. (ii) IUPAC name of the complex. -Chemistry

Description : When a co-ordination compound CrCl3.6H2O is mixed with AgNO3, 2 moles of AgCl are precipitated per mole of the compound. Write (i) Structural formula of the complex. (ii) IUPAC name of the complex. -Chemistry

Last Answer : (i) The complex formed on mixing a coordination compound CrCl3.6H2O with AgNO3 is as follows CrCl3.6H2O + AgNO3 → [Cr(H2O5)Cl]Cl2. H2O (ii) Pentaaquachloridochromium (III) chloride monohydrate

a) 110 g of salt is present in 550g of solution. Calculate the concentration of solution. b) 10 ml of H2SO 4 is dissolved in 90 ml of H2O. Calculate the concentration of solution. -Chemistry

Description : a) 110 g of salt is present in 550g of solution. Calculate the concentration of solution. b) 10 ml of H2SO 4 is dissolved in 90 ml of H2O. Calculate the concentration of solution. -Chemistry

Last Answer : The concentration of salt is determined by the division of mass of the solute by the mass of the solution and the percentage is obtained by multiplying the value by 100. The quotient of the division of 110 by 550 is 0.2 here. So after multiplying it with 100, it is 20%. So the concentration is 20%.

Write the molecular formulae of: 1. Copper oxide 2. Iron (III) chloride 3. Sodium hydroxide 4. Iron (II) sulphide 5. Lead (II) oxide 6. Hydrogen nitrate (nitric acid) 7. Hydrogen sulphate (sulphuric acid) 8. Calcium hydroxide 9. Magnesium carbonate 10.Ammonium carbonate

Description : Write the molecular formulae of: 1. Copper oxide 2. Iron (III) chloride 3. Sodium hydroxide 4. Iron (II) sulphide 5. Lead (II) oxide 6. Hydrogen nitrate (nitric ... Hydrogen sulphate (sulphuric acid) 8. Calcium hydroxide 9. Magnesium carbonate 10.Ammonium carbonate

Last Answer : 1. Copper oxide - CuO 2. Iron (III) chloride - FeCl3 3. Sodium hydroxide - NaOH 4. Iron (II) sulphide - FeS 5. Lead (II) oxide - PbO 6. Hydrogen nitrate (nitric acid) - HNO3 7. ... ) - H2SO4 8. Calcium hydroxide - Ca(OH)2 9. Magnesium carbonate - MgCO3 10.Ammonium carbonate - (NH4)2CO3

Sulphuric acid is mixed with ground phosphate rock (to produce phosphoric acid) in a steel digestor lined with(A) Acidic refractory(B) Rubber(C) Karbate(D) Lead or acid proof bricks

Description : Sulphuric acid is mixed with ground phosphate rock (to produce phosphoric acid) in a steel digestor lined with (A) Acidic refractory (B) Rubber (C) Karbate (D) Lead or acid proof bricks

Last Answer : (A) Acidic refractory

Sulphuric acid is mixed with ground phosphate rock (to produce phosphoric acid) in a steel digestor lined with (A) Acidic refractory (B) Rubber (C) Karbate (D) Lead or acid-proof bricks

Description : Sulphuric acid is mixed with ground phosphate rock (to produce phosphoric acid) in a steel digestor lined with (A) Acidic refractory (B) Rubber (C) Karbate (D) Lead or acid-proof bricks

Last Answer : (D) Lead or acid-proof bricks

25 mL of household bleach solution was mixed with 30 mL of o.50 M Kl and 10 mL of 4N acetic acid. In the titration of the liberated iodine, 48 mL of 0

Description : 25 mL of household bleach solution was mixed with 30 mL of o.50 M Kl and 10 mL of 4N acetic acid. In the titration of the liberated iodine, 48 mL of 0

Last Answer : 25 mL of household bleach solution was mixed with 30 mL of o.50 M Kl and 10 mL of 4N acetic acid. In the titration ... B. 0.96 M C. 0.24 M D. 0.024 M

4.A solution of acetone contains 30 ml of acetone in 570 ml of water. Calculate the percentage concentrationof the solute in the solution. -Chemistry

Description : 4.A solution of acetone contains 30 ml of acetone in 570 ml of water. Calculate the percentage concentrationof the solute in the solution. -Chemistry

Last Answer : Volume of acetone =30 ml Volume of water =570 ml Volume of solution = 30 + 570 = 600 ml Concentration of solute in solution = 30 / 600 x 100 ... = 30 / 600 x 100 = 5%

The contact process is involved in the manufacture of - (1) Nitric acid (2) Sulphuric acid (3) Ammonia (4) Caustic soda

Description : The contact process is involved in the manufacture of - (1) Nitric acid (2) Sulphuric acid (3) Ammonia (4) Caustic soda

Last Answer : (2) Sulphuric acid Explanation: It is also a central substance in the chemical industry. It is widely produced by contact process. Now days, sulphuric acid is prepared by contact process all over ... process is based upon the catalytic oxidation of sulfur dioxide (SO2) to sulfur trioxide (SO3).

0.257g of organic substance was heated with conc. sulphuric acid and then distilled with excess of strong alkali .the ammonia gas evolved was absorbed in 50ml of .1M HCl which required 23.2ml of c for neutralization at the end of the process. Determine the % of nitrogen in the compound ?

Description : 0.257g of organic substance was heated with conc. sulphuric acid and then distilled with excess of strong alkali .the ammonia gas evolved was absorbed in 50ml of .1M HCl which required 23.2ml of c for neutralization at the end of the process. Determine the % of nitrogen in the compound ?

Last Answer : A. Vol of 0 .1M HCl taken = 50ml Vol of .1MNaOH used for neutralization of unused acid=23.2ml Now, 23.2 ml of .1MNaOH =23.2ml of .1MHCl Vol of .1MHCl unused=23.2ml Vol of .1MHCl required ... NH3 solution contain nitrogen = 14*26.8/10*1000 Percentage of Nitrogen=14*26.8*100/10*1000*.257 =14.6%

Why a polystyrene cup is used instead of a glass beaker to find out heat of neutralization?

Description : Why a polystyrene cup is used instead of a glass beaker to find out heat of neutralization?

Last Answer : Ans: A polystyrene cup acts as an insulator therefore it will not allow heat to exchange between reaction mixture and its surroundings and enthalpy of reaction doesn’t change . On the other hand glass can easily transfer and exchange heat bringing change in enthalpy of reaction.

A beaker of ethyl alcohol is marked 188 proof. What percentage of the liquid is ethyl alcohol?

Description : A beaker of ethyl alcohol is marked 188 proof. What percentage of the liquid is ethyl alcohol?

Last Answer : ANSWER: 94%

State the condition for using the method of centrifugation to separate contents of a mixture.State the principle involved in this process. -Chemistry

Description : State the condition for using the method of centrifugation to separate contents of a mixture.State the principle involved in this process. -Chemistry

Last Answer : The basic principle of centrifugation is that the denser particles remain at the bottom and the lighter particles will remain at the top. it can be used with like colloids to separate suspended particles are separated by churning the liquid at high speed

12.Few iron filings and a pinch of sulphur powder are taken in a china dish and mixed properly. Justify the change, giving two points as physical/chemical change. -Chemistry

Description : 12.Few iron filings and a pinch of sulphur powder are taken in a china dish and mixed properly. Justify the change, giving two points as physical/chemical change. -Chemistry

Last Answer : It is a physical change as if we will bring the magnet near it all the iron fillings will attract towards it. Hence it shows the properties of it constituents are present so, no new substance is formed. Therefore, it is a physical change .

Which scientific method is used for the production/extraction of Sulphuric acid?

Description : Which scientific method is used for the production/extraction of Sulphuric acid?

Last Answer : Contact process

Electric furnace method for production of phosphorous uses phosphate rock and __________ (A) Phosphoric acid (B) Coke (C) Sulphuric acid (D) Silica and coke

Description : Electric furnace method for production of phosphorous uses phosphate rock and __________ (A) Phosphoric acid (B) Coke (C) Sulphuric acid (D) Silica and coke

Last Answer : (D) Silica and coke

For the estimation of nitrogen, 1.4 g of an organic compound was digested by Kjeldahl method and the evolved ammonia acid absorbed in 60 mL of `M/10`

Description : For the estimation of nitrogen, 1.4 g of an organic compound was digested by Kjeldahl method and the evolved ammonia acid absorbed in 60 mL of `M/10`

Last Answer : For the estimation of nitrogen, 1.4 g of an organic compound was digested by Kjeldahl method and the evolved ammonia ... ` B. `10%` C. `3%` D. `5%`

Write down the industrial application of following : (i) Hydrochloric acid (ii) Sulphuric acid (iii) Nitric acid

Description : Write down the industrial application of following : (i) Hydrochloric acid (ii) Sulphuric acid (iii) Nitric acid

Last Answer : Uses of hydrochloric acid  Used in or as a) Pickling of steel b) Regeneration of Ion exchange c) Production of inorganic compounds d) Oil production e) Leather processing Uses of ... For manufacturing of ammonium nitrate b) For nitration reaction c) Rocket propellant d) Cleaning agent

Name the acid present in the following: (i) Tomato (ii) Vinegar (iii) Tamarind -Chemistry

Description : Name the acid present in the following: (i) Tomato (ii) Vinegar (iii) Tamarind -Chemistry

Last Answer : Answer. (i) Oxalic acid (ii) Acetic acid (iii) Tartaric acid

(a) Define a balanced chemical equation. Why should an equation be balanced? (b) Write the balanced chemical equation for the following reaction: (i) Phosphorus burns in presence of chlorine to form phosphorus penta chloride. (ii) Burning of natural gas. (iii) The process of respiration. -Chemistry

Description : (a) Define a balanced chemical equation. Why should an equation be balanced? (b) Write the balanced chemical equation for the following reaction: (i) Phosphorus burns in presence of chlorine to form phosphorus penta chloride. (ii) Burning of natural gas. (iii) The process of respiration. -Chemistry

Last Answer : Answer. (a) Balanced chemical equation has an equal number of atoms of different elements in the reactants and products. According to law of conservation of mass, matter can neither be created nor be destroyed in a chemical ... C6H12O6 (s) + 6O2 (g) + 6H2O ---> 6CO2 (aq) + 12H2O (l) + energy

i) Write a balanced chemical equation for process of photosynthesis. (ii)When do desert plants take up carbon dioxide and perform photosynthesis? -Chemistry

Description : i) Write a balanced chemical equation for process of photosynthesis. (ii)When do desert plants take up carbon dioxide and perform photosynthesis? -Chemistry

Last Answer : Answer. (ii) In desert plants the stomata are open at night. They take CO2 at night and is stored in the form of acid and is used during day time for photosynthesis.

A metal ‘X’ acquires a green colour coating on its surface on exposure to air. (i) Identify the metal ‘X’ and name the process responsible for this change. (ii)Name and write chemical formula of the green coating formed on the metal. (iii) List two important methods to prevent the process. -Chemistry

Description : A metal X' acquires a green colour coating on its surface on exposure to air. (i) Identify the metal X' and name the process responsible for this change. (ii)Name and write chemical ... the green coating formed on the metal. (iii) List two important methods to prevent the process. -Chemistry

Last Answer : (i) Metal is copper. The process is corrosion. (ii)Basic copper carbonate [CuCO3.Cu(0H)2]. (iii) • It should be coated with tin • It should be mixed with other metals to form alloys.

Where do the water in the beaker get its heat energy from?

Description : Where do the water in the beaker get its heat energy from?

Last Answer : the fire

If a student dissolves powdered sugar in a water in a beaker the student then places a strip of silver in the beaker what is the solute in this solution?

Description : If a student dissolves powdered sugar in a water in a beaker the student then places a strip of silver in the beaker what is the solute in this solution?

Last Answer : Sugar is the solute.

When a cube of ice floating on water in a beaker melts, the level of water in the beaker (a) rises (b) falls (c) remains the same (d) first rises and then falls

Description : When a cube of ice floating on water in a beaker melts, the level of water in the beaker (a) rises (b) falls (c) remains the same (d) first rises and then falls

Last Answer : Ans:(c)

A piece of ice is floating in water kept in a beaker. When all the ice melts the level of water will - (1) first rise and then fall (2) fall (3) remain the same (4) rise

Description : A piece of ice is floating in water kept in a beaker. When all the ice melts the level of water will - (1) first rise and then fall (2) fall (3) remain the same (4) rise

Last Answer : (3) remain the same Explanation: The submerged portion of the ice on melting shrinks a little in volume. So the level of water goes down a little. But this is just made up by the water added by the melting of upper portion.

If an ordinary glass tube and a glass capillary tube are 'both clipped in a beaker of water, water rises in – (1) both (2) only the glass tube (3) only the capillary tube (4) neither

Description : If an ordinary glass tube and a glass capillary tube are 'both clipped in a beaker of water, water rises in – (1) both (2) only the glass tube (3) only the capillary tube (4) neither

Last Answer : (1) both Explanation: The rise or fall of liquid due to capillarity in a beaker of water depends upon the radius of the bore of the tube (s) which is/are dipped into it. The narrower the bore of ... in the tube. So in this case, water will rise in both the glass tube and the glass capillary tube.

Water contained in a beaker can be made to boil by passing steam through it  (a) at atmospheric pressure  (b) at a pressure below the firuosphejric pressure  (c) at a pressure greater than atmospheric pressure  (d) any pressure  (e) not possible.

Description : Water contained in a beaker can be made to boil by passing steam through it  (a) at atmospheric pressure  (b) at a pressure below the firuosphejric pressure  (c) at a pressure greater than atmospheric pressure  (d) any pressure  (e) not possible.

Last Answer : Answer : c

If an ordinary glass tube and a glass capillary tube are both dipped in a beaker of water, water rises in (1) both (2) only the glass tube (3) only the capillary tube (4) neither

Description : If an ordinary glass tube and a glass capillary tube are both dipped in a beaker of water, water rises in (1) both (2) only the glass tube (3) only the capillary tube (4) neither

Last Answer : both

What percentage is (i) Rs 15 of Rs 120? (ii) 36 minutes of 2 hours? (iii) 8 hours of 2 days (iv) 160 metres of 4 km? (v) 175 mL of 1 litre? (vi) 25 paise of Rs 4? -Maths

Description : What percentage is (i) Rs 15 of Rs 120? (ii) 36 minutes of 2 hours? (iii) 8 hours of 2 days (iv) 160 metres of 4 km? (v) 175 mL of 1 litre? (vi) 25 paise of Rs 4? -Maths

Last Answer : answer:

Which one of the following is commonly used for pulp bleaching in the paper industry? (1) Mild sulphuric acid (2) Glucose isomerase (3) Hydrogen peroxide (4) Iodine and water

Description : Which one of the following is commonly used for pulp bleaching in the paper industry? (1) Mild sulphuric acid (2) Glucose isomerase (3) Hydrogen peroxide (4) Iodine and water

Last Answer : (3) Hydrogen peroxide Explanation: Bleaching of wood pulp is the chemical processing carried out to decrease the color of the pulp, so that it becomes whiter. Alkaline hydrogen ... responsible for absorbing visible light. The decomposition of hydrogen peroxide is catalyzed by transition metals.

Write balanced chemical equations for the following word equations: (a) Iron + Chlorine → Iron (III) chloride (b) Magnesium + dil sulphuric acid → Magnesium sulphate + water (c) Magnesium + oxygen → Magnesium oxide (d) Calcium oxide + water → Calcium hydroxide (e) Sodium + chlorine → Sodium chloride

Description : Write balanced chemical equations for the following word equations: (a) Iron + Chlorine → Iron (III) chloride (b) Magnesium + dil sulphuric acid → Magnesium sulphate + water (c) Magnesium + oxygen → ... oxide (d) Calcium oxide + water → Calcium hydroxide (e) Sodium + chlorine → Sodium chloride

Last Answer : (a) Iron + Chlorine → Iron (III) chloride 4Fe + 3Cl2 → 2F2Cl3 (b) Magnesium + dil sulphuric acid → Magnesium sulphate + water 2Mg + 2H2SO4 → 2MgSO4 + 2H2 (c) Magnesium + oxygen → Magnesium oxide 2Mg ... hydroxide CaO + H2O → Ca(OH)2 (e) Sodium + chlorine → Sodium chloride 2Na + Cl2 → 2NaCl

Why sulphuric acid is added to the water during electrolysis of water?

Description : Why sulphuric acid is added to the water during electrolysis of water?

Last Answer : Ans: It is added to increase conduction of the water, because water is a weak electrolyte.

Which one of the following is commonly used for pulp bleaching in the paper industry? (1) Mild sulphuric acid (2) Glucose isomerase (3) Hydrogen peroxide (4) Iodine and water

Description : Which one of the following is commonly used for pulp bleaching in the paper industry? (1) Mild sulphuric acid (2) Glucose isomerase (3) Hydrogen peroxide (4) Iodine and water

Last Answer :  Hydrogen peroxide

Ethanoic acid is commonly called - (1) Acetic acid (2) Sulphuric acid (3) Sodium Ethoxide (4) Ethyne

Description : Ethanoic acid is commonly called - (1) Acetic acid (2) Sulphuric acid (3) Sodium Ethoxide (4) Ethyne

Last Answer : (1) Acetic acid Explanation: Ethanoic acid is commonly called acetic acid and belongs to a group of acids called carboxylic acids. 58% solution of acetic acid in water is called vinegar and is used widely as a preservative in pickles.

According to crop requirement and target specific use of inputs followed in — farming a. Mixed farming b. Precision farming c. Relay farming d. Subsistence farming

Description : According to crop requirement and target specific use of inputs followed in — farming a. Mixed farming b. Precision farming c. Relay farming d. Subsistence farming

Last Answer : b. Precision farming

The catalyst used in the manufacture of sulphuric acid by contact process is `:

Description : The catalyst used in the manufacture of sulphuric acid by contact process is `:

Last Answer : The catalyst used in the manufacture of sulphuric acid by contact process is `: A. `Al_(2)O_(3)` B. `Cr_(2)O_(3)` C. `V_(2)O_(5)` D. `Mn_(3)O_(4)`

Catalyst used in alkylation process is (A) Sulphuric acid (B) Nickel (C) Silica gel (D) Alumina

Description : Catalyst used in alkylation process is (A) Sulphuric acid (B) Nickel (C) Silica gel (D) Alumina

Last Answer : (A) Sulphuric acid

In the Contact process of sulphuric acid manufacture, 98% acid cooler is made of (A) Stainless steel (B) Cast iron (C) Lead lined steel (D) Rubber lined steel

Description : In the Contact process of sulphuric acid manufacture, 98% acid cooler is made of (A) Stainless steel (B) Cast iron (C) Lead lined steel (D) Rubber lined steel

Last Answer : (B) Cast iron

Sulphuric acid is used as a catalyst in the (A) Hydrogenation of oils (B) Gas phase oxidation of SO2 in chamber process (C) Alkylation of hydrocarbons(D) None of these

Description : Sulphuric acid is used as a catalyst in the (A) Hydrogenation of oils (B) Gas phase oxidation of SO2 in chamber process (C) Alkylation of hydrocarbons (D) None of these

Last Answer : (C) Alkylation of hydrocarbons

In chamber process of sulphuric acid manufacture in industry, the gas phase oxidation of SO2 to SO3 is accomplished by a __________ reaction. (A) Non-catalytic homogeneous (B) Non-catalytic heterogeneous (C) Catalytic homogenous (D) Catalytic heterogeneous

Description : In chamber process of sulphuric acid manufacture in industry, the gas phase oxidation of SO2 to SO3 is accomplished by a __________ reaction. (A) Non-catalytic homogeneous (B) Non-catalytic heterogeneous (C) Catalytic homogenous (D) Catalytic heterogeneous

Last Answer : (C) Catalytic homogenous

Pick out the wrong statement. (A) Chamber process of sulphuric acid manufacture produces pure acid of concentration < 80% (B) Contact process of sulphuric acid manufacture produces pure acid of concentration ≥ 98% (C) 75% oleum can be produced by distillation of 20% oleum (D) Contact process of sulphuric acid manufacture uses nickel as the catalyst

Description : Pick out the wrong statement. (A) Chamber process of sulphuric acid manufacture produces pure acid of concentration < 80% (B) Contact process of sulphuric acid manufacture produces pure acid of ... of 20% oleum (D) Contact process of sulphuric acid manufacture uses nickel as the catalyst

Last Answer : (D) Contact process of sulphuric acid manufacture uses nickel as the catalyst