List three characteristics of lungs which make it an efficient respiratory surface. -Biology

List three characteristics of lungs which make it an efficient respiratory surface. -Biology
by

1 Answer

Answer :

These features which particularly make our lungs efficient for gas exchange. 1.Thin: the air sac walls are very thin so that gases can quickly diffuse through them. Oxygen is absorbed in to the blood and carbon dioxide is given out in to the lungs to be exhaled out. 2.Moist: the air sacs are moist with mucus so that gases can dissolve before diffusing. 3.Large surface area: the surface area for gases to diffuse through in human lungs is roughly the same as a tennis court. The alveoli help to increase the surface area for absorption of oxygen. 4.Good blood supply: the air sacs or the alveoli have a large capillary network so that large volumes of gases can be exchanged. More the flow of blood more exchange.
by

Related questions

Which one of the following statements is incorrect? (a) The principle of countercurrent flow facilitates efficient respiration in gills of fishes. (b) The residual air in lungs slightly decreases the efficiency of respiration in mammals. (c) The presence of non-respiratory air sacs, increases the efficiency of respiration in birds. (d) In insects, circulating body fluids serve to distribute oxygen to tissues.

Description : Which one of the following statements is incorrect? (a) The principle of countercurrent flow facilitates efficient respiration in gills of fishes. (b) The residual air in lungs slightly decreases the ... in birds. (d) In insects, circulating body fluids serve to distribute oxygen to tissues.

Last Answer : (b) The residual air in lungs slightly decreases the efficiency of respiration in mammals.

Respiratory alkalosis can occur in (A) Bronchial asthma (B) Collapse of lungs (C) Hysterical hyperventilation (D) Bronchial obstruction

Description : Respiratory alkalosis can occur in (A) Bronchial asthma (B) Collapse of lungs (C) Hysterical hyperventilation (D) Bronchial obstruction

Last Answer : Answer : C

Why do brads not have respiratory trouble at the time of flying at high all? (1) Their lungs are very large (2) They fly inactively (3) They have extra air sacs (4) They use less

Description : Why do brads not have respiratory trouble at the time of flying at high all? (1) Their lungs are very large (2) They fly inactively (3) They have extra air sacs (4) They use less

Last Answer : (3) They have extra air sacs Explanation: The avian respiratory system delivers oxygen from the air to the tissues and also removes carbon dioxide. In addition, the respiratory system plays an ... play an important role in respiration (but are not directly involved in the exchange of gases).

Which one of the following is not correct with regard to the harmful effects of particulate matter of the size 2.5  micrometer or less? (a) It can cause respiratory problems. (b) It can directly enter into our circulatory system. (c) It can cause inflammation and damage to the lungs. (d) It can be inhaled into the lungs.

Description : Which one of the following is not correct with regard to the harmful effects of particulate matter of the size 2.5  micrometer or less? (a) It can cause respiratory problems. (b) It can directly enter ... ) It can cause inflammation and damage to the lungs. (d) It can be inhaled into the lungs.

Last Answer : (b) It can directly enter into our circulatory system.

Common cold differs from pneumonia in that (a) pneumonia is a communicable disease whereas the common cold is a nutritional deficienc(b) pneumonia can be prevented by a live attenuated bacterial vaccine whereas the common cold has no effective vaccine (c) pneumonia is caused by a virus while the common cold is caused by the bacterium Haemophilus influenzae (d) pneumonia pathogen infects alveoli whereas the common cold affects nose and respiratory passage but not the lungs.y disease

Description : Common cold differs from pneumonia in that (a) pneumonia is a communicable disease whereas the common cold is a nutritional deficiency disease (b) pneumonia can be prevented by a live attenuated ... infects alveoli whereas the common cold affects nose and respiratory passage but not the lungs.

Last Answer : (d) pneumonia pathogen infects alveoli whereas the common cold affects nose and respiratory passage but not the lungs.

The figure shows a diagrammatic view of human respiratory system with labels A, B, C and D. Select the option which gives correct identification and main function and / or characteristic. (a) C - Alveoli - Thin walled vascular bag like structures for exchange of gases. (b) D - Lower end of lungs - Diaphragm pulls it down during inspiration. (c) A - Trachea - Long tube supported by complete cartilaginous rings for conducting inspired air. (d) B - Pleural membrane - Surround ribs on both sides to provide cushion against rubbing.

Description : The figure shows a diagrammatic view of human respiratory system with labels A, B, C and D. Select the option which gives correct identification and main function and / or characteristic. (a) C - ... air. (d) B - Pleural membrane - Surround ribs on both sides to provide cushion against rubbing.

Last Answer : (a) C - Alveoli - Thin walled vascular bag like structures for exchange of gases.

The _____ is the most commonly infected region of the respiratory tract. a. Lungs b. Bronchi c. Throat d. Nose e. Tonsils

Description : The _____ is the most commonly infected region of the respiratory tract. a. Lungs b. Bronchi c. Throat d. Nose e. Tonsils

Last Answer : d. Nose

Which respiratory volume is the maximum volume of air that can be inhaled after maximal expiration? a) Inspiratory reserve volume Inspiratory reserve volume is normally 3000 mL. b) Tidal volume Tidal volume is the volume of air inhaled and exhaled with each breath. c) Expiratory reserve volume Expiratory reserve volume is the maximum volume of air that can be exhaled forcibly after a normal exhalation. d) Residual volume Residual volume is the volume of air remaining in the lungs after a maximum exhalation.

Description : Which respiratory volume is the maximum volume of air that can be inhaled after maximal expiration? a) Inspiratory reserve volume Inspiratory reserve volume is normally 3000 mL. b) Tidal volume Tidal ... volume Residual volume is the volume of air remaining in the lungs after a maximum exhalation.

Last Answer : a) Inspiratory reserve volume Inspiratory reserve volume is normally 3000 mL.

Why do brids not have respiratory trouble at the time of flying at high altitude ? (1) Their lungs are very large (2) They fly inactively (3) They have extra air sacs (4) They use less oxygen

Description : Why do brids not have respiratory trouble at the time of flying at high altitude ? (1) Their lungs are very large (2) They fly inactively (3) They have extra air sacs (4) They use less oxygen

Last Answer : They have extra air sacs

What vertebrates have air sacs attached to their lungs that make lungs more efficient?

Description : What vertebrates have air sacs attached to their lungs that make lungs more efficient?

Last Answer : Need answer

List any four characteristics of efficient maintenance.

Description : List any four characteristics of efficient maintenance.

Last Answer : Ans: Characteristics of Efficient Maintenance:  1) Planning of schedule.  2) Investigation of failures.  3) Repair facilities such as adequate staff, shed, plant and machinery.  4 ... for maintenance spares.  7) Inspection of stores purchased according to working drawings and specifications.

Which one of the following characteristics is not shared by birds and mammals? (a) Viviparity (b) Warm blooded nature (c) Ossified endoskeleton (d) Breathing using lungs

Description : Which one of the following characteristics is not shared by birds and mammals? (a) Viviparity (b) Warm blooded nature (c) Ossified endoskeleton (d) Breathing using lungs

Last Answer : (a) Viviparity

What are The air sacs in your lungs that create a large surface area for diffusion called?

Description : What are The air sacs in your lungs that create a large surface area for diffusion called?

Last Answer : Need answer

How lungs fulfill this requirement that large surface area and thin epithelium are required for gaseous exchange?

Description : How lungs fulfill this requirement that large surface area and thin epithelium are required for gaseous exchange?

Last Answer : Feel Free to Answer

How do you calculate total surface area for aveoli in lungs?

Description : How do you calculate total surface area for aveoli in lungs?

Last Answer : Need answer

Assertion `:-` Emphysema is a chornnic disorder in which alveolar walls are damaged due to which respiratory surface decreases. Reason `:-` One of the

Description : Assertion `:-` Emphysema is a chornnic disorder in which alveolar walls are damaged due to which respiratory surface decreases. Reason `:-` One of the

Last Answer : Assertion `:-` Emphysema is a chornnic disorder in which alveolar walls are damaged due to which ... D. If both Assertion & Reason are false.

Chronic disorder in which alveolar wall are damaged due to which respiratory surface is decreased. One of the major causes of this is cigarette smokin

Description : Chronic disorder in which alveolar wall are damaged due to which respiratory surface is decreased. One of the major causes of this is cigarette smokin

Last Answer : Chronic disorder in which alveolar wall are damaged due to which respiratory surface is decreased. ... Asthma B. Emphysema C. Bronchitis D. Fibrosis

The redox carriers are grouped into respiratory chain complex (A) In the inner mitochondrial membrane (B) In mitochondiral matrix (C) On the outer mitochondrial membrane (D) On the inner surface of outer mitochondrial membrane

Description : The redox carriers are grouped into respiratory chain complex (A) In the inner mitochondrial membrane (B) In mitochondiral matrix (C) On the outer mitochondrial membrane (D) On the inner surface of outer mitochondrial membrane

Last Answer : Answer : A

Major part of CO2 is transported to respiratory surface in form of which ion?

Description : Major part of CO2 is transported to respiratory surface in form of which ion?

Last Answer : HCO3 ion

Which of the following options correctly represents the lung conditions in asthma and emphysema, respectively? (a) Inflammation of bronchioles; Decreased respi- ratory surface (b) Increased number of bronchioles; Increased respiratory surface (c) Increased respiratory surface; Inflammation of bronchioles (d) Decreased respiratory surface; Inflammation of bronchioles

Description : Which of the following options correctly represents the lung conditions in asthma and emphysema, respectively? (a) Inflammation of bronchioles; Decreased respi- ratory surface (b) ... respiratory surface; Inflammation of bronchioles (d) Decreased respiratory surface; Inflammation of bronchioles

Last Answer : (a) Inflammation of bronchioles; Decreased respi- ratory surface

Carbon dioxide is transported from tissues to respiratory surface by only (a) plasma and erythrocytes (b) plasma (c) erythrocytes (d) erythrocytes and leucocytes

Description : Carbon dioxide is transported from tissues to respiratory surface by only (a) plasma and erythrocytes (b) plasma (c) erythrocytes (d) erythrocytes and leucocytes

Last Answer : (a) plasma and erythrocytes

Major part of CO2 is transported to respiratory surface in form of which ion?

Description : Major part of CO2 is transported to respiratory surface in form of which ion?

Last Answer : HCO3 ion

Which of the following options correctly represents the lung conditions in asthma and emphysema, respectively ? (1) Inflammation of bronchioles; Decreased respiratory surface (2) Increased number of bronchioles; Increased respiratory surface (3) Increased respiratory surface; Inflammation of bronchioles (4) Decreased respiratory surface; Inflammation of bronchioles

Description : Which of the following options correctly represents the lung conditions in asthma and emphysema, respectively ? (1) Inflammation of bronchioles; Decreased respiratory surface (2) ... respiratory surface; Inflammation of bronchioles (4) Decreased respiratory surface; Inflammation of bronchioles

Last Answer : (1) Inflammation of bronchioles; Decreased respiratory surface

Identify the air pollutant in urban areas which irritates eyes and also respiratory tract of human beings. (A) Particulate matter (B) Oxides of nitrogen (C) Surface ozone (D) Carbon monoxide

Description : Identify the air pollutant in urban areas which irritates eyes and also respiratory tract of human beings. (A) Particulate matter (B) Oxides of nitrogen (C) Surface ozone (D) Carbon monoxide

Last Answer : (C) Surface ozone

1. Which is the oldest Development Financial Institution of India? 2. What is a powerful eye irritant present in smog? 3. Where is respiratory centre situated? 4. Which part of the Earth’s surface receives the highest amount of insolation? 5. Which are manuals of instruction in the form of brief rules?

Description : 1. Which is the oldest Development Financial Institution of India? 2. What is a powerful eye irritant present in smog? 3. Where is respiratory centre situated? 4. Which part of the Earth's ... famous for its deposits of nitrates? 20. Which queen enjoyed political power along with her husband?

Last Answer : Answer : 1. IFCI 2. Sulphur dioxide 3. Medulla oblongata 4. Tropical deserts 5. Sutras 6. Home Minister 7. Srinivas Ramanujan 8. Economics 9. Condensation 10. Tanjore 11. Less than unity 12. ... Cholas and Rashtrakutas 16. Export-Import Banks 17. Jimmy Carter 18. Acetylene 19. Atacama 20. Nur Jahan

List any three characteristics of a good SRS.

Description : List any three characteristics of a good SRS.

Last Answer : Ans:The SRS should be: Correct , Unambiguous, Complete 1. Correct: An SRS is correct iff every requirement stated therein is one that the software shall meet . 2. Unambiguous: An SRS is ... full labels and references to all figures and diagram and definition of all terms and units of measures

No legs have I to dance, No lungs have I to breathe, No life have I to live or die And yet I do all three. What am I? -Riddles

Description : No legs have I to dance, No lungs have I to breathe, No life have I to live or die And yet I do all three. What am I? -Riddles

Last Answer : Fire.

No legs have I to dance, No lungs have I to breathe, No life have I to live or die And yet I do all three. What am I? -Riddles

Description : No legs have I to dance, No lungs have I to breathe, No life have I to live or die And yet I do all three. What am I? -Riddles

Last Answer : I am Fire.

A high surface area to volume ratio in cells is important because it (a) Enables efficient transfer of wastes, nutrients and gases across the cell membrane (b) Prevents overproduction of cell proteins due to structural limitations (c) Allows many antigens on the surface for identification of self and non-self (d) Provides for better structural support to cope with external physical pressure

Description : A high surface area to volume ratio in cells is important because it (a) Enables efficient transfer of wastes, nutrients and gases across the cell membrane (b) Prevents overproduction of cell ... self and non-self (d) Provides for better structural support to cope with external physical pressure

Last Answer : Ans:(a)

Stone ware pipes are A. Highly resistant to sulphide corrosion B. Highly impervious C. Hydraulically efficient because of their smooth interior surface D. Especially suited to pressure pipes

Description : Stone ware pipes are A. Highly resistant to sulphide corrosion B. Highly impervious C. Hydraulically efficient because of their smooth interior surface D. Especially suited to pressure pipes

Last Answer : ANS: D

Babbitt metal used for making bearings should have (A) High co-efficient of friction between journal and bearing (B) Ability to retain lubricant on its surface (C) Low co-efficient of friction between journal and bearing (D) Both (B) & (C)

Description : Babbitt metal used for making bearings should have (A) High co-efficient of friction between journal and bearing (B) Ability to retain lubricant on its surface (C) Low co-efficient of friction between journal and bearing (D) Both (B) & (C)

Last Answer : (A) High co-efficient of friction between journal and bearing

Mass transfer co-efficient is directly proportional to DAB 0.5 , according to __________ theory. (A) Penetration (B) Surface renewal (C) Film (D) None of these

Description : Mass transfer co-efficient is directly proportional to DAB 0.5 , according to __________ theory. (A) Penetration (B) Surface renewal (C) Film (D) None of these

Last Answer : (A) Penetration

Mass transfer co-efficient is directly proportional to DAB according to the __________ theory. (A) Film (B) Penetration (C) Surface-renewal (D) None of these

Description : Mass transfer co-efficient is directly proportional to DAB according to the __________ theory. (A) Film (B) Penetration (C) Surface-renewal (D) None of these

Last Answer : (A) Film

Calculation of mass transfer co-efficient is mostly/normally done using __________ theory. (A) Surface renewal (B) Film (C) Penetration (D) None of these

Description : Calculation of mass transfer co-efficient is mostly/normally done using __________ theory. (A) Surface renewal (B) Film (C) Penetration (D) None of these

Last Answer : (B) Film

Pick out the wrong statement. (A) Superheated steam is preferably not used for process heating because of its low heat transfer film co-efficient (B) In a shell and tube heat exchanger, the shell pressure drop is maximum for orifice baffles (C) S.I. unit of fouling factor is Watt/m2 .°K (D) Longitudinal fins are used in extended surface heat exchangers, when the direction of fluid flow is parallel to the axis of the tube

Description : Pick out the wrong statement. (A) Superheated steam is preferably not used for process heating because of its low heat transfer film co-efficient (B) In a shell and tube heat exchanger ... surface heat exchangers, when the direction of fluid flow is parallel to the axis of the tube

Last Answer : (C) S.I. unit of fouling factor is Watt/m2 .°K

Heat exchangers operating, when the asymptotic range is reached, (A) Provide very large heat transfer co-efficient (B) Results in making part of the heating surface inactive (C) Results in abruptly increased velocity (D) None of these

Description : Heat exchangers operating, when the asymptotic range is reached, (A) Provide very large heat transfer co-efficient (B) Results in making part of the heating surface inactive (C) Results in abruptly increased velocity (D) None of these

Last Answer : (B) Results in making part of the heating surface inactive

In an extended surface heat exchanger, fluid having lower co-efficient (A) Flows through the tube (B) Flows outside the tubes (C) Can flow either inside or outside the tubes (D) Should not be used as it gives very high pressure drop

Description : In an extended surface heat exchanger, fluid having lower co-efficient (A) Flows through the tube (B) Flows outside the tubes (C) Can flow either inside or outside the tubes (D) Should not be used as it gives very high pressure drop

Last Answer : (B) Flows outside the tubes

The main purpose of providing fins on heat transfer surface is to increase the (A) Temperature gradient (B) Mechanical strength of the equipment (C) Heat transfer area (D) Heat transfer co-efficient

Description : The main purpose of providing fins on heat transfer surface is to increase the (A) Temperature gradient (B) Mechanical strength of the equipment (C) Heat transfer area (D) Heat transfer co-efficient

Last Answer : (C) Heat transfer area

Which of the following parameters is increased by use of finned tube in a multipass shell and tube heat exchanger? (A) Tube side pressure drop and the heat transfer rate (B) Convective heat transfer co-efficient (C) Effective tube surface area for convective heat transfer (D) All (A) (B) and (C)

Description : Which of the following parameters is increased by use of finned tube in a multipass shell and tube heat exchanger? (A) Tube side pressure drop and the heat transfer rate (B) Convective heat transfer co-efficient (C) Effective tube surface area for convective heat transfer (D) All (A) (B) and (C)

Last Answer : (D) All (A) (B) and (C)

. The inner wall of a furnace is at a temperature of 700°C. The composite wall is made of two substances, 10 and 20 cm thick with thermal conductivities of 0.05 and 0.1 W.m-1.°C-1 respectively. The ambient air is at 30°C and the heat transfer co-efficient between the outer surface of wall and air is 20 W.m-2 .°C-1 . The rate of heat loss from the outer surface in W.m-2 is (A) 165.4 (B) 167.5 (C) 172.5 (D) 175

Description : . The inner wall of a furnace is at a temperature of 700°C. The composite wall is made of two substances, 10 and 20 cm thick with thermal conductivities of 0.05 and 0.1 W.m-1.°C-1 respectively. The ambient air is at 30°C ... from the outer surface in W.m-2 is (A) 165.4 (B) 167.5 (C) 172.5 (D) 175

Last Answer : (A) 165.4

Fouling factor for a heat exchanger is given by (where, U1 = heat transfer co-efficient of dirty surface U2 = heat transfer co-efficient of clean surface). (A) U1 - U2 (B) 1/U1 - 1/U2 (C) 1/U2 - 1/U1 (D) U2 - U1

Description : Fouling factor for a heat exchanger is given by (where, U1 = heat transfer co-efficient of dirty surface U2 = heat transfer co-efficient of clean surface). (A) U1 - U2 (B) 1/U1 - 1/U2 (C) 1/U2 - 1/U1 (D) U2 - U1

Last Answer : (B) 1/U1 - 1/U2

Which of the following is an undesirable property of a manometricliquid? (A) Non-sticky & non-corrosive nature (B) High vapour pressure (C) Low viscosity & surface tension (D) Low co-efficient of thermal expansion

Description : Which of the following is an undesirable property of a manometricliquid? (A) Non-sticky & non-corrosive nature (B) High vapour pressure (C) Low viscosity & surface tension (D) Low co-efficient of thermal expansion

Last Answer : (B) High vapour pressure

Which of the following equations as suggested by Colebrook and White gives the increase in roughness of a new surface (ε0 ) with age/time (t) (where, ε = roughness of the surface after time't'. α = a co-efficient to be experimentally determined)? (A) ε = ε0 + α.t (B) ε = ε0 + α.t 2 (C) ε = ε0 + α.t 3 (D) ε = ε0 + α.t

Description : Which of the following equations as suggested by Colebrook and White gives the increase in roughness of a new surface (ε0 ) with age/time (t) (where, ε = roughness of the surface after time't'. α = a co-efficient to be experimentally determined ... ε = ε0 + α.t 2 (C) ε = ε0 + α.t 3 (D) ε = ε0 + α.t

Last Answer : (A) ε = ε0 + α.t

The pressure co-efficient is the ratio of pressure forces to __________ forces. (A) Viscous (B) Inertial (C) Gravity (D) Surface tension

Description : The pressure co-efficient is the ratio of pressure forces to __________ forces. (A) Viscous (B) Inertial (C) Gravity (D) Surface tension

Last Answer : (A) Viscous

Co-efficient of wind resistance of a circular surface, is (A) 1/2 (B) 1/3 (C) 2/3 (D) 3/2

Description : Co-efficient of wind resistance of a circular surface, is  (A) 1/2  (B) 1/3  (C) 2/3  (D) 3/2

Last Answer : (C) 2/3

Even though heat transfer co-efficient in boiling liquids is large, use of fins is advantageous, when the entire surface is exposed to __________ boiling. (A) Film (B) Nucleate (C) Transition (D) All modes of

Description : Even though heat transfer co-efficient in boiling liquids is large, use of fins is advantageous, when the entire surface is exposed to __________ boiling. (A) Film (B) Nucleate (C) Transition (D) All modes of

Last Answer : Option A

In regard to carbide burs; the more number of cutting blades and low speed will result in: A. Less efficient cutting and a smoother surface B. Less efficient cutting and a rougher surface C. More efficient cutting and a smoother surface D. More efficient cutting and a rougher surface

Description : In regard to carbide burs; the more number of cutting blades and low speed will result in: A. Less efficient cutting and a smoother surface B. Less efficient cutting and a rougher surface C. More efficient cutting and a smoother surface D. More efficient cutting and a rougher surface

Last Answer : A. Less efficient cutting and a smoother surface

What's the most efficient way to show something you've posted on Craig's List?

Description : What's the most efficient way to show something you've posted on Craig's List?

Last Answer : Welcome to the world of sales. It sucks. You need to realize that these flakes are your customers so they're gonna vacillate on ya. If you can, try to re-confirm the appointment ... different sales channel where you need not have direct interaction until after they've purchased. How about eBay?

Suppose you want to delete the name that occurs before “Vivek” in an alphabetical listing. Which of the following data structures shall be most efficient for this operation? (A) Circular linked list (B) Doubly linked list (C) Linked list (D) Dequeue

Description : Suppose you want to delete the name that occurs before “Vivek” in an alphabetical listing. Which of the following data structures shall be most efficient for this operation? (A) Circular linked list (B) Doubly linked list (C) Linked list (D) Dequeue

Last Answer :  (B) Doubly linked list