When surveying: A. Tilt the cast

When surveying:
A. Tilt the cast
by

1 Answer

Answer :

A. Tilt the cast
by

Related questions

Jaw relations for edentulous patient have been established. The maxillary cast has been mounted on the articulator without face-bow and you decide to increase the occlusal vertical dimension by 4 mm. This will necessitate, A. Opening the articulator 4 mm B. A new centric relation record C. Changes in the condylar guide settings D. Increase in the vertical dimension

Description : Jaw relations for edentulous patient have been established. The maxillary cast has been mounted on the articulator without face-bow and you decide to increase the occlusal vertical dimension by 4 mm ... record C. Changes in the condylar guide settings D. Increase in the vertical dimension

Last Answer : B. A new centric relation record

A partial denture that seats on the master cast but fails to seat correctly in the mouth is a result of, A. Contraction of the metal framework during casting B. Insufficient expansion of the investment material C. Distortion of impression D. Failure to block out unwanted undercuts

Description : A partial denture that seats on the master cast but fails to seat correctly in the mouth is a result of, A. Contraction of the metal framework during casting B. Insufficient expansion of the investment material C. Distortion of impression D. Failure to block out unwanted undercuts

Last Answer : C. Distortion of impression

In the construction of partial dentures the surveyor is not used to, A. Contour the wax as part of the fabrication of the working cast B. Locate the guide planes C. Determine the location of indirect retainers D. Identify any undesirable undercuts

Description : In the construction of partial dentures the surveyor is not used to, A. Contour the wax as part of the fabrication of the working cast B. Locate the guide planes C. Determine the location of indirect retainers D. Identify any undesirable undercuts

Last Answer : A. Contour the wax as part of the fabrication of the working cast

Which one of this restorative methods will be LEAST compromised by a core, A. Amalgam B. Composite C. GIC D. Cast gold

Description : Which one of this restorative methods will be LEAST compromised by a core, A. Amalgam B. Composite C. GIC D. Cast gold

Last Answer : D. Cast gold

A cast crown fits on the die but not on the tooth, the discrepancy is about 0.3mm, what would you do: A. Relieve cast from the inside B. Take a new impression and make new crown C. Burnish margins D. Use thick mix of cement

Description : A cast crown fits on the die but not on the tooth, the discrepancy is about 0.3mm, what would you do: A. Relieve cast from the inside B. Take a new impression and make new crown C. Burnish margins D. Use thick mix of cement

Last Answer : B. Take a new impression and make new crown

Why are three tripods marked on a cast being surveyed: A. To orient cast to articulator B. To orient cast to surveyor C. To provide guide planes

Description : Why are three tripods marked on a cast being surveyed: A. To orient cast to articulator B. To orient cast to surveyor C. To provide guide planes

Last Answer : B. To orient cast to surveyor

You can increase the retention of a Maryland bridge by: A. Incorporating mesh work in wax pattern B. Perforation techniques in the metal cast

Description : You can increase the retention of a Maryland bridge by: A. Incorporating mesh work in wax pattern B. Perforation techniques in the metal cast

Last Answer : A. Incorporating mesh work in wax pattern

When dry cast is immersed in water saturated with calcium sulphate:** A. There is contraction B. There is negligible expansion C. There is definite expansion D. There is no change E. None of the above

Description : When dry cast is immersed in water saturated with calcium sulphate:** A. There is contraction B. There is negligible expansion C. There is definite expansion D. There is no change E. None of the above

Last Answer : B. There is negligible expansion

The MOST effective manner to produce a hard surface on a cast is by: A. Employ as much water as possible on mixing B. Employ as little water as possible on mixing C. Adding 2% of borax to the mix D. Adding calcium tetraborate E. None of the above

Description : The MOST effective manner to produce a hard surface on a cast is by: A. Employ as much water as possible on mixing B. Employ as little water as possible on mixing C. Adding 2% of borax to the mix D. Adding calcium tetraborate E. None of the above

Last Answer : B. Employ as little water as possible on mixing

A gingivally extended chrome cobalt cast clasp: A. Can extend 0.5 under the surveyor line B. Can extend 0.25 under the surveyor line C. Will resist deforming forces better compared to cast gold

Description : A gingivally extended chrome cobalt cast clasp: A. Can extend 0.5 under the surveyor line B. Can extend 0.25 under the surveyor line C. Will resist deforming forces better compared to cast gold

Last Answer : B. Can extend 0.25 under the surveyor line

How can a periodontal pocket be recognised:** A. X-Ray B. Periodontal probe / Calibrated probe C. Periodontal marker D. Bitewing radiograph E. Sharp explorer F. Study cast

Description : How can a periodontal pocket be recognised:** A. X-Ray B. Periodontal probe / Calibrated probe C. Periodontal marker D. Bitewing radiograph E. Sharp explorer F. Study cast

Last Answer : B. Periodontal probe / Calibrated probe

Distortion or change in shape of a cast partial denture clasp during its clinical use probably indicates that the: A. Ductility was too low B. Hardness was too great C. Ultimate tensile strength was too low D. Tension temperature was too high E. Elastic limit was exceeded

Description : Distortion or change in shape of a cast partial denture clasp during its clinical use probably indicates that the: A. Ductility was too low B. Hardness was too great C. Ultimate tensile strength was too low D. Tension temperature was too high E. Elastic limit was exceeded

Last Answer : E. Elastic limit was exceeded

Which of the following areas CANNOT be determined by survey analysis of partially edentulous cast? A. Areas to be revealed as blocked out to properly located rigid parts of a frame work B. Areas to be shaped to properly located rigid parts of framework C. Areas used for guideline planes D. Areas used for retention E. Areas used for support F. Depth of rest seats

Description : Which of the following areas CANNOT be determined by survey analysis of partially edentulous cast? A. Areas to be revealed as blocked out to properly located rigid parts of a frame work B. Areas to be ... planes D. Areas used for retention E. Areas used for support F. Depth of rest seats

Last Answer : F. Depth of rest seats

.Oil or water on impression for treatment casts causes: A. An increase of the quality B. No alteration C. A decrease of the quality D. Bubbles on the cast

Description : .Oil or water on impression for treatment casts causes: A. An increase of the quality B. No alteration C. A decrease of the quality D. Bubbles on the cast

Last Answer : C. A decrease of the quality

Jaw relation of an edentulous patient has been established. The maxillary cast has been mounted on an articulator without a face bow. You decide to increase the occlusal vertical dimension by 4mm this will necessitate, A. Opening the articulator 4mm B. A new centric relation to be recorded C. A change in the condylar guide settings D. An increase in the rest vertical dimension

Description : Jaw relation of an edentulous patient has been established. The maxillary cast has been mounted on an articulator without a face bow. You decide to increase the occlusal vertical dimension by 4mm this ... C. A change in the condylar guide settings D. An increase in the rest vertical dimension

Last Answer : B. A new centric relation to be recorded

In planning and construction of a cast metal partial denture the study cast, M07 A. facilitate the construction of custom/special trays B. minimize the need for articulating C. provide only limited information about inter ridge distance, which is best assessed clinically D. can be used as a working cast when duplicating facilities are not available

Description : In planning and construction of a cast metal partial denture the study cast, M07 A. facilitate the construction of custom/special trays B. minimize the need for articulating C. provide only ... best assessed clinically D. can be used as a working cast when duplicating facilities are not available

Last Answer : A. facilitate the construction of custom/special trays

Why do people tilt camera to be "artsy"?

Description : Why do people tilt camera to be "artsy"?

Last Answer : I like the effect sometimes. Totally depends on the photo.

How do I setup my MacBook Pro as a fish tank using the tilt sensors?

Description : How do I setup my MacBook Pro as a fish tank using the tilt sensors?

Last Answer : oh my, i’ve been removed!

Which is the planet its length of its day and the tilt of its axis are almost identical to those of the earth? -Do You Know?

Description : Which is the planet its length of its day and the tilt of its axis are almost identical to those of the earth? -Do You Know?

Last Answer : answer:

At what angle does the Earth tilt on its axis? -General Knowledge

Description : At what angle does the Earth tilt on its axis? -General Knowledge

Last Answer : answer:

Why is the angle of the orbit (tilt) the moon uses to revolve around the sun?

Description : Why is the angle of the orbit (tilt) the moon uses to revolve around the sun?

Last Answer : The orbit of the moon around the sun is a wiggle around theEarth's orbit - because the moon is locked into the Earth'sgravitational grasp.The angle of the moon's orbit around the Earth was set by thecollision that formed the moon.

What is io's axis tilt?

Description : What is io's axis tilt?

Last Answer : Feel Free to Answer

What is the tilt of the earts axis?

Description : What is the tilt of the earts axis?

Last Answer : what is the earths tilt axis

What is one of four major divisions of the year based on earths tilt and the light from the sun?

Description : What is one of four major divisions of the year based on earths tilt and the light from the sun?

Last Answer : What is the answer ?

What is retroscopic tilt and the need for it in eyeglasses?

Description : What is retroscopic tilt and the need for it in eyeglasses?

Last Answer : What is the answer ?

What uses the retroscopic tilt?

Description : What uses the retroscopic tilt?

Last Answer : What is the answer ?

How does the tilt of earths axis account for differences in the area of sunlight each hemisphere receives during the summer solstice and winter solstice?

Description : How does the tilt of earths axis account for differences in the area of sunlight each hemisphere receives during the summer solstice and winter solstice?

Last Answer : What is the answer ?

What is the tilt of the earts axis?

Description : What is the tilt of the earts axis?

Last Answer : what is the earths tilt axis

Does the tilt mount need to be mounted on studs Or is anywhere on the wall fine?

Description : Does the tilt mount need to be mounted on studs Or is anywhere on the wall fine?

Last Answer : Peerless-ST640-Smartmount-Universal-Tilt-Mount can be fitted anywhere on the wall with the help of the stud it is provided with. The studs are needed to mount it on the wall, anywhere.

Does a garden parasol tilt sideways?

Description : Does a garden parasol tilt sideways?

Last Answer : Predominantly a writer of thrillers which used science-fiction and Horror elements, he was best known for the creation of the character Professor Bernard Quatermass. Quatermass was a heroic scientist w and Thames Television between 1953 and 1996

How do the tilt of Earths axis and Earths movement’s around the sun cause seasons?

Description : How do the tilt of Earths axis and Earths movement’s around the sun cause seasons?

Last Answer : Earth's tilted axis causes the seasons. Throughout the year, different parts of Earth receive the Sun's most direct rays. So, when the North Pole tilts toward the Sun, it's summer in the northern hemisphere. And when the South Pole tilts toward the Sun, it's winter in the Northern Hemisphere.

What causes earth's axial tilt?

Description : What causes earth's axial tilt?

Last Answer : Seasons. If the axis of the Earth's rotation wasn't tilted with respect to the ecliptic, there would be no "winter" or "summer". There's evidence to suggest that without our seasons, life on Earth would be PROFOUNDLY different.

Mechanism or device which enables the TV camera to move in internal and tilting motion. A. Tilting B. Scanner C. Pan/tilt device D. Panning device

Description : Mechanism or device which enables the TV camera to move in internal and tilting motion. A. Tilting B. Scanner C. Pan/tilt device D. Panning device

Last Answer : C. Pan/tilt device

Which is the planet its length of its day and the tilt of its axis are almost identical to those of the earth?

Description : Which is the planet its length of its day and the tilt of its axis are almost identical to those of the earth?

Last Answer : Mars

Which is the planet its length of its day and the tilt of its axis are almost identical to those of the earth?

Description : Which is the planet its length of its day and the tilt of its axis are almost identical to those of the earth?

Last Answer : Mars

Tilt angle of a disc plough is generally— (A) 10° (B) 15° (C) 20° (D) 45°

Description : Tilt angle of a disc plough is generally— (A) 10° (B) 15° (C) 20° (D) 45°

Last Answer : (D) 45°

Which instrument are used for intensity of the earthquakea) Richter scale b) Seismometers c) Seismograph d) Tilt meter

Description : Which instrument are used for intensity of the earthquake a) Richter scale b) Seismometers c) Seismograph d) Tilt meter

Last Answer : b) Seismometers

Which techniques are used for prediction of early warning of eruption? a. Electric Distance Measures b. Tilt Meters c. GPS and Satellite Inferring Rader d. All of the above

Description : Which techniques are used for prediction of early warning of eruption? a. Electric Distance Measures b. Tilt Meters c. GPS and Satellite Inferring Rader d. All of the above

Last Answer : d. All of the above

Large tilt angle is best for a. Hard soil b. Sticky and non scouring soil c. Dry and cemented soil d. None of these

Description : Large tilt angle is best for a. Hard soil b. Sticky and non scouring soil c. Dry and cemented soil d. None of these

Last Answer : b. Sticky and non scouring soil

Penetration of disc plough can be improved by a. Increasing disc angle b. Decreasing tilt angle c. Both a & b d. None of these

Description : Penetration of disc plough can be improved by a. Increasing disc angle b. Decreasing tilt angle c. Both a & b d. None of these

Last Answer : b. Decreasing tilt angle

Pick up the correct statement from the following: (A) The tangent screw enables to give small movement under conditions of smooth and positive control (B) Standing on the tripod is the levelling head or trib arch (C) The levelling screws are used to tilt the instrument so that its rotation axis is truly vertical (D) All the above

Description : Pick up the correct statement from the following: (A) The tangent screw enables to give small movement under conditions of smooth and positive control (B) Standing on the tripod is the levelling head ... used to tilt the instrument so that its rotation axis is truly vertical (D) All the above

Last Answer : (D) All the above

Tilt of the staff in stadia tacheometry increases the intercept if it is (A) Away from the telescope pointing down hill (B) Towards the telescope pointing up-hill (C) Away from the telescope pointing up-hill (D) None of these

Description : Tilt of the staff in stadia tacheometry increases the intercept if it is (A) Away from the telescope pointing down hill (B) Towards the telescope pointing up-hill (C) Away from the telescope pointing up-hill (D) None of these

Last Answer : (C) Away from the telescope pointing up-hill

The penetration of a tandem disc harrow can be increased by a) Increasing tilt angle b) Increasing disc angle c) Increasing disc diameter d) All of the above Ans.c

Description : The penetration of a tandem disc harrow can be increased by a) Increasing tilt angle b) Increasing disc angle c) Increasing disc diameter d) All of the above Ans.c

Last Answer : Ans.c

In disc ploughs tilt angel varies between b. 25-35° c. 35-45° d. 45-50°

Description : In disc ploughs tilt angel varies between b. 25-35° c. 35-45° d. 45-50°

Last Answer : Ans -   a. 15-25°

The tilt angle varies form…° to….. °. For a good plough a. 20°,30°. c) 15°,30° b. 10°,30°. d) 15°,25°

Description : The tilt angle varies form…° to….. °. For a good plough a. 20°,30°. c) 15°,30° b. 10°,30°. d) 15°,25°

Last Answer : 15°,25°

Width of cut of disc plow is increased by a)Increasing disc angle b)Increasing tilt angle c)addition of more weight d)Decreasing disc angle

Description : Width of cut of disc plow is increased by a)Increasing disc angle b)Increasing tilt angle c)addition of more weight d)Decreasing disc angle

Last Answer : a)Increasing disc angle

The depth of penetration of a disc harrow is increased by: a) Tilt angle b) Gang angle c) Disc angle d) All of above

Description : The depth of penetration of a disc harrow is increased by: a) Tilt angle b) Gang angle c) Disc angle d) All of above

Last Answer : b) Gang angle

.Large tilt angle best for a) Hard soil b) Sticky and non-scouring soil c) Dry and cemented soil d None of the above

Description : .Large tilt angle best for a) Hard soil b) Sticky and non-scouring soil c) Dry and cemented soil d None of the above

Last Answer : b) Sticky and non-scouring soil

Penetration of disc plough can be improved by a) Increase disc angle b) Decreasing tilt angle c) Both (a) and (b) d) None of the above

Description : Penetration of disc plough can be improved by a) Increase disc angle b) Decreasing tilt angle c) Both (a) and (b) d) None of the above

Last Answer : b) Decreasing tilt angle

Maximum tilt specified during sinking of well foundation is a) 1 in 10 b) 1 in 50 c) 1 in 100* d) 1 in 150

Description : Maximum tilt specified during sinking of well foundation is a) 1 in 10 b) 1 in 50 c) 1 in 100* d) 1 in 150

Last Answer : c) 1 in 100*