The definition of the instruction “MONITORO” is: a. Listen out on frequency b. Establish communications on frequency c. Watch out for visual signals on frequency d. You are being watched

The definition of the instruction “MONITORO” is:  
a. Listen out on frequency  
b. Establish communications on frequency  
c. Watch out for visual signals on frequency  
d. You are being watched
by

1 Answer

Answer :

a. Listen out on frequency
by

Related questions

The definition of the instruction “MONITORO” is: a. Listen out on frequency b. Establish communications on frequency c. Watch out for visual signals on frequency d. You are being watched

Description : The definition of the instruction “MONITORO” is: a. Listen out on frequency b. Establish communications on frequency c. Watch out for visual signals on frequency d. You are being watched

Last Answer : a. Listen out on frequency

When making a blind transmission you should: a. Transmit the message twice b. Transmit each word twice c. Repeat the message on 121.5 MHz d. Wait for visual signals

Description : When making a blind transmission you should: a. Transmit the message twice b. Transmit each word twice c. Repeat the message on 121.5 MHz d. Wait for visual signals

Last Answer : a. Transmit the message twice

When refuelling is being conducted with passengers embarking or disembarking: a. Refuelling is strictly prohibited whilst passengers are embarking or disembarking b. All flight crew must be on board c. Communications shall be maintained by ground crew and qualified crew on board d. The stairs shall be fully extended

Description : When refuelling is being conducted with passengers embarking or disembarking: a. Refuelling is strictly prohibited whilst passengers are embarking or disembarking b. All flight crew must be on board c. ... by ground crew and qualified crew on board d. The stairs shall be fully extended

Last Answer : c. Communications shall be maintained by ground crew and qualified crew on board

The definition of the DISTRESS condition is that: a. There is concern for the safety of the aircraft or a person on board or other vehicle but there is no need for immediate assistance b. The aircraft is in imminent danger and requires immediate assistance c. The aircraft has crashed d. The aircraft is being hijacked

Description : The definition of the DISTRESS condition is that: a. There is concern for the safety of the aircraft or a person on board or other vehicle but there is no need for immediate assistance ... and requires immediate assistance c. The aircraft has crashed d. The aircraft is being hijacked

Last Answer : b. The aircraft is in imminent danger and requires immediate assistance

Following a communications failure, the time at which the aircraft should aim to leave the hold is: a. Within 10 minutes of the EAT or ETA b. Within 30 minutes of the EAT or ETA c. EAT or ETA d. Before it runs out of fuel

Description : Following a communications failure, the time at which the aircraft should aim to leave the hold is: a. Within 10 minutes of the EAT or ETA b. Within 30 minutes of the EAT or ETA c. EAT or ETA d. Before it runs out of fuel

Last Answer : c. EAT or ETA

The full range of VHF frequencies used for communications is: a. 3 to 30 MHz b. 88 to 108 MHz c. 108.0 to 139.95 MHz d. 118.0 to 136.975 MHz

Description : The full range of VHF frequencies used for communications is: a. 3 to 30 MHz b. 88 to 108 MHz c. 108.0 to 139.95 MHz d. 118.0 to 136.975 MHz

Last Answer : d. 118.0 to 136.975 MHz

The time given in aeronautical communications is: a. Local mean time b. In minutes only c. UTC d. Daylight saving time

Description : The time given in aeronautical communications is: a. Local mean time b. In minutes only c. UTC d. Daylight saving time

Last Answer : c. UTC

The selection of the code 7600 on a transponder indicates: a. Loss of communications b. Distress c. Urgency d. Hijacking

Description : The selection of the code 7600 on a transponder indicates: a. Loss of communications b. Distress c. Urgency d. Hijacking

Last Answer : a. Loss of communications

Readability 2 means that your transmission is: a. Readable but with difficulty b. Readable c. Readable now and then d. Two way communications have been established

Description : Readability 2 means that your transmission is: a. Readable but with difficulty b. Readable c. Readable now and then d. Two way communications have been established

Last Answer : c. Readable now and then

What is DH used for? a. Visual maneuvering b. Circling to land c. Precision approaches d. Non-precision approaches

Description : What is DH used for? a. Visual maneuvering b. Circling to land c. Precision approaches d. Non-precision approaches

Last Answer : c. Precision approaches

When do you not need a destination alternate aerodrome? a. If there is a reasonable certainty that at the ETA at the destination aerodrome and a reasonable time before and after you can expect VMC b. If the flight time is less than 6 hours c. If the flight time is less than 1 hour d. If your operator deems the weather to be suitable for a visual landing

Description : When do you not need a destination alternate aerodrome? a. If there is a reasonable certainty that at the ETA at the destination aerodrome and a reasonable time before and after you can expect VMC ... less than 1 hour d. If your operator deems the weather to be suitable for a visual landing

Last Answer : a. If there is a reasonable certainty that at the ETA at the destination aerodrome and a reasonable time before and after you can expect VMC

What is required for navigation in IMC? a. Radio equipment and equipment for guidance until visual point b. Anti-icing equipment c. A serviceable weather radar d. One VHF box and one HF box

Description : What is required for navigation in IMC? a. Radio equipment and equipment for guidance until visual point b. Anti-icing equipment c. A serviceable weather radar d. One VHF box and one HF box

Last Answer : a. Radio equipment and equipment for guidance until visual point

The visual and aural indications obtained when overflying an ILS middle marker are: a. Continuous low pitched dashes with synchronized blue light b. Continuous high pitched dots with synchronized amber light c. Alternating medium pitch dots and dashes with amber light d. One letter in Morse with synchronized white light

Description : The visual and aural indications obtained when overflying an ILS middle marker are: a. Continuous low pitched dashes with synchronized blue light b. Continuous high pitched dots with synchronized amber ... dots and dashes with amber light d. One letter in Morse with synchronized white light

Last Answer : c. Alternating medium pitch dots and dashes with amber light

What visual technique should be used when searching for an aircraft? a. Sweep from side to side with the eyes covering the whole field of vision b. Search the sky portion by portion starting on the left c. Pinpoint 10° segments of the sky and confirm before passing onto another d. Use a succession of small and rapid eye movements

Description : What visual technique should be used when searching for an aircraft? a. Sweep from side to side with the eyes covering the whole field of vision b. Search the sky portion by portion starting ... the sky and confirm before passing onto another d. Use a succession of small and rapid eye movements

Last Answer : c. Pinpoint 10° segments of the sky and confirm before passing onto another

An aircraft flying in the visual circuit at an aerodrome sees a series of red flashes from the control tower. What does this mean? a. Do not land b. Do not land because the aerodrome is unusable c. Give way to other aircraft d. Return for landing and await clearance to land

Description : An aircraft flying in the visual circuit at an aerodrome sees a series of red flashes from the control tower. What does this mean? a. Do not land b. Do not land because the aerodrome is unusable c. Give way to other aircraft d. Return for landing and await clearance to land

Last Answer : b. Do not land because the aerodrome is unusable

An aircraft is allowed to descend below the MSA if: a. The pilot follows the published approach procedures b. The aircraft receives radar vectors c. The pilot has visual contact with the runway and surrounding terrain and is able to maintain visual contact d. All of the above

Description : An aircraft is allowed to descend below the MSA if: a. The pilot follows the published approach procedures b. The aircraft receives radar vectors c. The pilot has visual contact with the runway and surrounding terrain and is able to maintain visual contact d. All of the above

Last Answer : d. All of the above

The instruction “ORBIT” from ATC means that the aircraft should: a. Carry out a go around b. Continue with 360 degree turns c. Carry out one 360 degree turn only d. Reverse the direction of the turn

Description : The instruction “ORBIT” from ATC means that the aircraft should: a. Carry out a go around b. Continue with 360 degree turns c. Carry out one 360 degree turn only d. Reverse the direction of the turn

Last Answer : c. Carry out one 360 degree turn only

The correct reply to the instruction “HOLD SHORT AT RUNWAY” is: a. WILCO b. ROGER c. HOLDING SHORT d. UNDERSTOOD

Description : The correct reply to the instruction “HOLD SHORT AT RUNWAY” is: a. WILCO b. ROGER c. HOLDING SHORT d. UNDERSTOOD

Last Answer : c. HOLDING SHORT

The definition of the phrase “STANDBY” is: a. Consider the transmission as not sent b. Proceed with your message c. Wait and I will call you d. Hold your present position

Description : The definition of the phrase “STANDBY” is: a. Consider the transmission as not sent b. Proceed with your message c. Wait and I will call you d. Hold your present position

Last Answer : c. Wait and I will call you

In the event of an act of unlawful interference, which of the following is the correct procedure to be taken by the pilot in command? a. Squawk 7700 if the situation requires and continue the flight as per the ATC clearance received if possible b. Squawk 7500 and broadcast a warning to ATC other traffic on 121.500MHz or the frequency in use whilst maintaining the flight as cleared c. Squawk 7500 (or 7700 if required) and broadcast a warning if the situation forces deviation from the cleared flight plan d. If forced to deviate from the flight plan, climb or descend to altitudes that differ from the normal cruising altitudes by 1000ft

Description : In the event of an act of unlawful interference, which of the following is the correct procedure to be taken by the pilot in command? a. Squawk 7700 if the situation requires and continue ... the flight plan, climb or descend to altitudes that differ from the normal cruising altitudes by 1000ft

Last Answer : c. Squawk 7500 (or 7700 if required) and broadcast a warning if the situation forces deviation from the cleared flight plan

The DME counters are rotating continuously. This indicates that: a. The DME is unserviceable b. The DME is trying to lock onto range c. The DME is trying to lock onto frequency d. The DME is receiving no response from the ground station

Description : The DME counters are rotating continuously. This indicates that: a. The DME is unserviceable b. The DME is trying to lock onto range c. The DME is trying to lock onto frequency d. The DME is receiving no response from the ground station

Last Answer : b. The DME is trying to lock onto range

The frequency band of the ILS glidepath is: a. UHF b. VHF c. SHF d. VLF

Description : The frequency band of the ILS glidepath is: a. UHF b. VHF c. SHF d. VLF

Last Answer : a. UHF

DME and VOR are “frequency paired” because: a. The same receiver can be used for both aids b. The VOR transmitter is easily converted to the required DME frequency c. Cockpit workload is reduced d. Both ground transmitter aerials can be placed on the same site if required

Description : DME and VOR are “frequency paired” because: a. The same receiver can be used for both aids b. The VOR transmitter is easily converted to the required DME frequency c. Cockpit workload is reduced d. Both ground transmitter aerials can be placed on the same site if required

Last Answer : c. Cockpit workload is reduced

Which frequency band is a wavelength of 1200m? a. UHF b. LF c. HF d. MF

Description : Which frequency band is a wavelength of 1200m? a. UHF b. LF c. HF d. MF

Last Answer : b. LF

A typical DME frequency is: a. 1000 MHz b. 1300 MHz c. 1000 kHz d. 1575 MHz

Description : A typical DME frequency is: a. 1000 MHz b. 1300 MHz c. 1000 kHz d. 1575 MHz

Last Answer : a. 1000 MHz

In what frequency band is the ATIS normally broadcasted? a. LF b. HF c. ADF d. VHF

Description : In what frequency band is the ATIS normally broadcasted? a. LF b. HF c. ADF d. VHF

Last Answer : d. VHF

The correct readback of the frequency 123.725 on 25 kHz spacing is: a. 123.725 b. 123.7 c. 12372 d. 123.72

Description : The correct readback of the frequency 123.725 on 25 kHz spacing is: a. 123.725 b. 123.7 c. 12372 d. 123.72

Last Answer : a. 123.725

The minimum content of a readback of the message from ATC “X-CD CHANGE FREQUENCY TO STEPHENVILLE TOWER 118.7” is: a. 118.7 b. CHANGING FREQUENCY X-CD c. TO STEPHENVILLE X-CD d. 118.7 X-CD

Description : The minimum content of a readback of the message from ATC “X-CD CHANGE FREQUENCY TO STEPHENVILLE TOWER 118.7” is: a. 118.7 b. CHANGING FREQUENCY X-CD c. TO STEPHENVILLE X-CD d. 118.7 X-CD

Last Answer : d. 118.7 X-CD

If you are unable to contact a station on a designated frequency you should: a. Try another appropriate frequency b. Start transmitting blind c. Land at the nearest suitable aerodrome d. Transmit words twice

Description : If you are unable to contact a station on a designated frequency you should: a. Try another appropriate frequency b. Start transmitting blind c. Land at the nearest suitable aerodrome d. Transmit words twice

Last Answer : a. Try another appropriate frequency

When reporting a frequency the use of the word “DECIMAL” can be omitted: a. When there is no likelihood of confusion b. After the initial call c. Never d. By the ground station only

Description : When reporting a frequency the use of the word “DECIMAL” can be omitted: a. When there is no likelihood of confusion b. After the initial call c. Never d. By the ground station only

Last Answer : c. Never

The frequency on which ATIS can be found is: a. Discrete VHF or VOR frequency b. Discrete VHF only c. VOR frequency only d. Any ATC frequency

Description : The frequency on which ATIS can be found is: a. Discrete VHF or VOR frequency b. Discrete VHF only c. VOR frequency only d. Any ATC frequency

Last Answer : a. Discrete VHF or VOR frequency

The ATC message “DISTRESS TRAFFIC ENDED” signifies that: a. All traffic are to end their transmissions b. All aircraft on the frequency are to change to another frequency c. Normal ATC is resumed after an emergency d. ATC is shutting shop

Description : The ATC message “DISTRESS TRAFFIC ENDED” signifies that: a. All traffic are to end their transmissions b. All aircraft on the frequency are to change to another frequency c. Normal ATC is resumed after an emergency d. ATC is shutting shop

Last Answer : c. Normal ATC is resumed after an emergency

A precautionary landing is a procedure that: a. Enables the aeroplane to land at the destination with unserviceabilities that prevent a normal instrument approach being carried out b. Enables a landing after the declaration of a state of emergency or urgency c. Enables a landing if it is suspected that the undercarriage is not properly lowered d. Is carried out in the event of landing at an alternate aerodrome

Description : A precautionary landing is a procedure that: a. Enables the aeroplane to land at the destination with unserviceabilities that prevent a normal instrument approach being carried out b. Enables a ... not properly lowered d. Is carried out in the event of landing at an alternate aerodrome

Last Answer : b. Enables a landing after the declaration of a state of emergency or urgency

The VOR indications on an RMI whose deviation is not zero: a. Are magnetic b. Are compass c. Are relative d. Must have deviation applied before being used

Description : The VOR indications on an RMI whose deviation is not zero: a. Are magnetic b. Are compass c. Are relative d. Must have deviation applied before being used

Last Answer : a. Are magnetic

Which of the following is an obligation of being an ICAO contracting state? a. ICAO must be informed about all new flight crew licenses and any suspended validity of such licenses b. ICAO must be informed about differences from the standards detailed in any of the annexes to the Chicago convention c. ICAO must approve the pricing of tickets on international airline connections d. ICAO must be informed about changes to national regulations

Description : Which of the following is an obligation of being an ICAO contracting state? a. ICAO must be informed about all new flight crew licenses and any suspended validity of such licenses ... of tickets on international airline connections d. ICAO must be informed about changes to national regulations

Last Answer : b. ICAO must be informed about differences from the standards detailed in any of the annexes to the Chicago convention

If so equipped, when should an aircraft display the anti-collision light? a. Only at night in flight, but not on the ground if being towed b. Whilst taxiing but not whilst being towed c. Only at night with engines running d. At all times on the ground when the engines are running

Description : If so equipped, when should an aircraft display the anti-collision light? a. Only at night in flight, but not on the ground if being towed b. Whilst taxiing but not whilst being towed c. Only at night with engines running d. At all times on the ground when the engines are running

Last Answer : d. At all times on the ground when the engines are running

Why get a visual communications diploma?

Description : Why get a visual communications diploma?

Last Answer : In going to a local college, he can get a degree faster (usually 2 years) and then go out and get work experience. After that, he can easily go back to a university and get a 4 year degree + all that work experience.

DTP is a tool for graphic designers and non_designers to create visual communications for professional. DTP stands for (a) Device Transfer Protocol -Technology

Description : DTP is a tool for graphic designers and non_designers to create visual communications for professional. DTP stands for (a) Device Transfer Protocol -Technology

Last Answer : (b) DTP stands for Desktop Publishing.

The most accurate way to evaluate the effectiveness of root planning is by: A. Inspect the root surface with an instrument for root smoothness B. Use air for visual inspection C. Activate a curette against root surface and listen for a high pitched sound which indicates a smooth, hard surface. D. Evaluate the soft tissue at the end of the appointment for a decrease oedema and bleeding E. Evaluate the soft tissues 10 to 14 days later.

Description : The most accurate way to evaluate the effectiveness of root planning is by: A. Inspect the root surface with an instrument for root smoothness B. Use air for visual inspection C. Activate a ... the appointment for a decrease oedema and bleeding E. Evaluate the soft tissues 10 to 14 days later.

Last Answer : E. Evaluate the soft tissues 10 to 14 days later.

What can I do? I just found out that my husband likes to watch and be watched on webcam with gays...

Description : What can I do? I just found out that my husband likes to watch and be watched on webcam with gays...

Last Answer : You two should talk about this.

What can I do with 100+ DVDs that I haven't watched for years and will never watch again?

Description : What can I do with 100+ DVDs that I haven't watched for years and will never watch again?

Last Answer : Mail them to third world contries that are just getting dvd players. Long term medical homes could take them. You could put them on eBay as an auction and sell the lot for best offer. You can use them as decorations.

How long does it take to watch a TV show for it to be considered "watched" by the Nielsen rating system?

Description : How long does it take to watch a TV show for it to be considered "watched" by the Nielsen rating system?

Last Answer : You have to be part of the Nielsen program, as I understand it, which includes a box provided by Nielsen that transmits the information. Unless they’ve changed the way it works, if you didn’t sign up, they don’t know what you are watching.

My daughter had 3 boys in her 1st marriage. They divorced so I quit my job and have watched her boys for 13 years. She tells me that I haven’t done anything for her and doesn’t need me to watch them anymore. How can I tell her she has really hurt me?

Description : My daughter had 3 boys in her 1st marriage. They divorced so I quit my job and have watched her boys for 13 years. She tells me that I haven’t done anything for her and doesn’t need me to watch them anymore. How can I tell her she has really hurt me?

Last Answer : That's a really tough situation. I don't have a good answer—perhaps a counselor could help you work through these feelings and take good steps forward. I really hope things work out.

My daughter had 3 boys in her 1st marriage. They divorced so I quit my job and have watched her boys for 13 years. She tells me that I haven’t done anything for her and doesn’t need me to watch them anymore. How can I tell her she has really hurt me?

Description : My daughter had 3 boys in her 1st marriage. They divorced so I quit my job and have watched her boys for 13 years. She tells me that I haven’t done anything for her and doesn’t need me to watch them anymore. How can I tell her she has really hurt me?

Last Answer : That's a really tough situation. I don't have a good answer—perhaps a counselor could help you work through these feelings and take good steps forward. I really hope things work out.

If it is suspected that a bomb is on board an aeroplane, the measures that should be taken are designed to: a. Disable the device b. Find out what will trigger the device c. Prevent knowledge of the device on board getting to the passengers d. Locate and move the device to the ‘least risk’ location and apply as much padding as possible

Description : If it is suspected that a bomb is on board an aeroplane, the measures that should be taken are designed to: a. Disable the device b. Find out what will trigger the device c. Prevent ... d. Locate and move the device to the least risk' location and apply as much padding as possible

Last Answer : d. Locate and move the device to the ‘least risk’ location and apply as much padding as possible

Shortly after take-off, the altitude of the aeroplane suffers an abrupt pitch-up and IAS rapidly decreases followed quickly by a decrease in altitude. Engine indications are normal. You should suspect what and what should you do? a. Marked temperature drop; apply full power b. Loss of head wind or an increase in tail wind; apply full power c. Incipient engine failure (ignore instruments); lower the nose to gain airspeed d. Local clear air turbulence; reduce speed to VRA and ride it out

Description : Shortly after take-off, the altitude of the aeroplane suffers an abrupt pitch-up and IAS rapidly decreases followed quickly by a decrease in altitude. Engine indications are normal. You should suspect what ... to gain airspeed d. Local clear air turbulence; reduce speed to VRA and ride it out

Last Answer : b. Loss of head wind or an increase in tail wind; apply full power

The method of alighting the aeroplane on water during a ditching is to: a. Carry out a normal approach with flaps and gear selected as normal but to calculate all speeds plus 10kts b. Reduce the approach angle to 1.5deg (150ft/mile), add 15kts to all speeds, keep the aeroplane clean (no flaps or gear) and fly it into the surface c. Fly a normal approach but keep the gear up and land at lowest possible speed with the nose raised for the tail to strike first d. Fly a normal approach to stalling speed and then drop the aeroplane vertically onto the water

Description : The method of alighting the aeroplane on water during a ditching is to: a. Carry out a normal approach with flaps and gear selected as normal but to calculate all speeds plus 10kts b. Reduce ... d. Fly a normal approach to stalling speed and then drop the aeroplane vertically onto the water

Last Answer : c. Fly a normal approach but keep the gear up and land at lowest possible speed with the nose raised for the tail to strike first

During a slow decompression, passengers will occur: a. The cabin temperature will fall as pressure reduces b. Body cavities (sinuses, ears, etc.) will become pressurised and may require assistance in venting c. As soon as the pressure falls, the oxygen drop-out system will operate d. No contra effects, as slow decompression has no effect on the human body

Description : During a slow decompression, passengers will occur: a. The cabin temperature will fall as pressure reduces b. Body cavities (sinuses, ears, etc.) will become pressurised and may require assistance in ... will operate d. No contra effects, as slow decompression has no effect on the human body

Last Answer : b. Body cavities (sinuses, ears, etc.) will become pressurised and may require assistance in venting

A pilot suffering from decompression sickness should: a. Descend to a lower level where the symptoms will disappear and continue the flight at this or a lower level b. Decrease the cabin pressure to relieve the symptoms c. Continue the flight at a lower altitude and carry out exercises to relieve the pain in the affected site d. Land as soon as possible and seek medical assistance

Description : A pilot suffering from decompression sickness should: a. Descend to a lower level where the symptoms will disappear and continue the flight at this or a lower level b. Decrease the cabin pressure ... the pain in the affected site d. Land as soon as possible and seek medical assistance

Last Answer : d. Land as soon as possible and seek medical assistance

A flight is planned from L to M, distance 850 nm. Wind component out is 35 kt(TWC), TAS 450kt. Mean fuel flow out is 2500kg/hr, mean fuel flow inbound is 1900kg/hr and the fuel available is 6000kg. The time and distance to PSR is: a. 1hr 30 min, 660nm b. 1hr 30 min, 616nm c. 1hr 15 min, 606nm d. 1hr 16 min, 616nm

Description : A flight is planned from L to M, distance 850 nm. Wind component out is 35 kt(TWC), TAS 450kt. Mean fuel flow out is 2500kg/hr, mean fuel flow inbound is 1900kg/hr and the fuel available is 6000kg. The time ... 30 min, 660nm b. 1hr 30 min, 616nm c. 1hr 15 min, 606nm d. 1hr 16 min, 616nm

Last Answer : d. 1hr 16 min, 616nm