Which of the following would give the best indication of speed? a. A VOR on the flight plan route b. A VOR off the flight plan route c. A DME on the flight plan route d. A DME off the flight plan route

Which of the following would give the best indication of speed?  
a. A VOR on the flight plan route  
b. A VOR off the flight plan route  
c. A DME on the flight plan route  
d. A DME off the flight plan route
by

1 Answer

Answer :

c. A DME on the flight plan route
by

Related questions

An aircraft is attempting to home to a VOR on the 064 radial. The CDI shows 4 dots fly right with a TO indication. At the same time the co-located DME shows a range of 45nm. Where is the aircraft in relation to the required track? a. 6nm right of track b. 3nm right of track c. 6nm left of track d. 3nm left of track

Description : An aircraft is attempting to home to a VOR on the 064 radial. The CDI shows 4 dots fly right with a TO indication. At the same time the co-located DME shows a range of 45nm. Where is the aircraft in relation ... right of track b. 3nm right of track c. 6nm left of track d. 3nm left of track

Last Answer : c. 6nm left of track

The IRS position can be updated: a. On the ground only b. At designated positions en-route and on the ground c. On the ground and overhead VOR/DME d. At selected waypoints and on the ground

Description : The IRS position can be updated: a. On the ground only b. At designated positions en-route and on the ground c. On the ground and overhead VOR/DME d. At selected waypoints and on the ground

Last Answer : a. On the ground only

A basic 2D RNAV system will determine tracking information from: a. Twin DME b. VOR/DME c. Twin VOR d. Any of the above

Description : A basic 2D RNAV system will determine tracking information from: a. Twin DME b. VOR/DME c. Twin VOR d. Any of the above

Last Answer : b. VOR/DME

DME and VOR are “frequency paired” because: a. The same receiver can be used for both aids b. The VOR transmitter is easily converted to the required DME frequency c. Cockpit workload is reduced d. Both ground transmitter aerials can be placed on the same site if required

Description : DME and VOR are “frequency paired” because: a. The same receiver can be used for both aids b. The VOR transmitter is easily converted to the required DME frequency c. Cockpit workload is reduced d. Both ground transmitter aerials can be placed on the same site if required

Last Answer : c. Cockpit workload is reduced

An aircraft is required to intercept and home to a VOR along the 064 radial. The OBS should be set to: a. 064 to get the correct needle sense and a TO indication b. 244 to get the correct needle sense and a TO indication c. 064 to get the correct needle sense and a FROM indication d. 244 to get the correct needle sense and a FROM indication

Description : An aircraft is required to intercept and home to a VOR along the 064 radial. The OBS should be set to: a. 064 to get the correct needle sense and a TO indication b. 244 to get the ... the correct needle sense and a FROM indication d. 244 to get the correct needle sense and a FROM indication

Last Answer : b. 244 to get the correct needle sense and a TO indication

You make a diversion from the route given in the flight plan and land at an uncontrolled airfield. Within what time after landing should you inform ATC? a. 10 mins b. 20 mins c. 30 mins d. 45 mins

Description : You make a diversion from the route given in the flight plan and land at an uncontrolled airfield. Within what time after landing should you inform ATC? a. 10 mins b. 20 mins c. 30 mins d. 45 mins

Last Answer : c. 30 mins

At a range of 200nm from a VOR, if there is an error of 1°, how far off the centreline is the aircraft? a. 3.5nm b. 1.75nm c. 7nm d. 1nm

Description : At a range of 200nm from a VOR, if there is an error of 1°, how far off the centreline is the aircraft? a. 3.5nm b. 1.75nm c. 7nm d. 1nm

Last Answer : a. 3.5nm

The DME in an aircraft, cruising at FL210, fails to achieve a lock on a DME at MSL at a range of 210nm. The reason for this is: a. The beacon is saturated b. The aircraft is beyond the maximum usable range for DME c. The aircraft is beyond line of sight range d. The aircraft signal is too weak at the range to trigger a response

Description : The DME in an aircraft, cruising at FL210, fails to achieve a lock on a DME at MSL at a range of 210nm. The reason for this is: a. The beacon is saturated b. The aircraft is beyond ... is beyond line of sight range d. The aircraft signal is too weak at the range to trigger a response

Last Answer : c. The aircraft is beyond line of sight range

The DME counters are rotating continuously. This indicates that: a. The DME is unserviceable b. The DME is trying to lock onto range c. The DME is trying to lock onto frequency d. The DME is receiving no response from the ground station

Description : The DME counters are rotating continuously. This indicates that: a. The DME is unserviceable b. The DME is trying to lock onto range c. The DME is trying to lock onto frequency d. The DME is receiving no response from the ground station

Last Answer : b. The DME is trying to lock onto range

Which of the following is a primary radar system? a. SSR b. DME c. GPS d. AWR

Description : Which of the following is a primary radar system? a. SSR b. DME c. GPS d. AWR

Last Answer : d. AWR

A typical DME frequency is: a. 1000 MHz b. 1300 MHz c. 1000 kHz d. 1575 MHz

Description : A typical DME frequency is: a. 1000 MHz b. 1300 MHz c. 1000 kHz d. 1575 MHz

Last Answer : a. 1000 MHz

The range indicated by DME is considered to be accurate within: a. 3% of range b. 1.25% of range c. 0.5nm d. ±0.25nm ±1.25% of range

Description : The range indicated by DME is considered to be accurate within: a. 3% of range b. 1.25% of range c. 0.5nm d. ±0.25nm ±1.25% of range

Last Answer : d. ±0.25nm ±1.25% of range

Both the VOR and the ADF in an aircraft are correctly tuned and identified. The indications from both are shown on the RMI illustrated. The information on the RMI indicates: a. That the aircraft is heading 033° (M), is on the 310° radial from the VOR, and bears 050° (M) from the NDB b. That the aircraft is heading 330° (M), is on the 310° radial from the VOR, and bears 050° (M) from the NDB c. That the aircraft is heading 330° (M), is on the 130° radial from the VOR, and bears 050° (M) from the NDB d. That the aircraft is heading 330° (M), is on the 130° radial from the VOR, and bears 230° (M) from the NDB

Description : Both the VOR and the ADF in an aircraft are correctly tuned and identified. The indications from both are shown on the RMI illustrated. The information on the RMI indicates: a. That the aircraft is heading 033° (M ... 330° (M), is on the 130° radial from the VOR, and bears 230° (M) from the NDB

Last Answer : d. That the aircraft is heading 330° (M), is on the 130° radial from the VOR, and bears 230° (M) from the NDB

Both the VOR and the ADF in an aircraft are correctly tuned and identified. The indications from both are shown on the RMI illustrated. The information on the RMI indicates: a. That the aircraft is heading 033° (M), is on the 310° radial from the VOR, and bears 050° (M) from the NDB b. That the aircraft is heading 330° (M), is on the 310° radial from the VOR, and bears 050° (M) from the NDB c. That the aircraft is heading 330° (M), is on the 130° radial from the VOR, and bears 050° (M) from the NDB d. That the aircraft is heading 330° (M), is on the 130° radial from the VOR, and bears 230° (M) from the NDB

Description : Both the VOR and the ADF in an aircraft are correctly tuned and identified. The indications from both are shown on the RMI illustrated. The information on the RMI indicates: a. That the aircraft is heading 033° (M ... 330° (M), is on the 130° radial from the VOR, and bears 230° (M) from the NDB

Last Answer : d. That the aircraft is heading 330° (M), is on the 130° radial from the VOR, and bears 230° (M) from the NDB

An aircraft wishes to track a VOR along the 274 radial. If variation is 10° W, what should be set on the OBS? a. 274 b. 264 c. 094 d. 084

Description : An aircraft wishes to track a VOR along the 274 radial. If variation is 10° W, what should be set on the OBS? a. 274 b. 264 c. 094 d. 084

Last Answer : c. 094

An aircraft is tracking inbound to a VOR beacon on the 105 radial. The setting the pilot should put on the OBS and the CDI indications are: a. 285, TO b. 105, TO c. 285, FROM d. 105, FROM

Description : An aircraft is tracking inbound to a VOR beacon on the 105 radial. The setting the pilot should put on the OBS and the CDI indications are: a. 285, TO b. 105, TO c. 285, FROM d. 105, FROM

Last Answer : a. 285, TO

The VOR indications on an RMI whose deviation is not zero: a. Are magnetic b. Are compass c. Are relative d. Must have deviation applied before being used

Description : The VOR indications on an RMI whose deviation is not zero: a. Are magnetic b. Are compass c. Are relative d. Must have deviation applied before being used

Last Answer : a. Are magnetic

In a Doppler VOR (DVOR) the reference signal is _____, the bearing signal is ______ and the direction of rotation of the bearing signal is ______. a. AM, FM, anti-clockwise b. AM, FM, clockwise c. FM, AM, anti-clockwise d. FM, AM, clockwise

Description : In a Doppler VOR (DVOR) the reference signal is _____, the bearing signal is ______ and the direction of rotation of the bearing signal is ______. a. AM, FM, anti-clockwise b. AM, FM, clockwise c. FM, AM, anti-clockwise d. FM, AM, clockwise

Last Answer : a. AM, FM, anti-clockwise

The frequency on which ATIS can be found is: a. Discrete VHF or VOR frequency b. Discrete VHF only c. VOR frequency only d. Any ATC frequency

Description : The frequency on which ATIS can be found is: a. Discrete VHF or VOR frequency b. Discrete VHF only c. VOR frequency only d. Any ATC frequency

Last Answer : a. Discrete VHF or VOR frequency

What radius from a terminal VOR is MSA provided? a. 25nm b. 10nm c. 15nm d. 15km

Description : What radius from a terminal VOR is MSA provided? a. 25nm b. 10nm c. 15nm d. 15km

Last Answer : a. 25nm

For a flight plan filed before flight, the indicated time of departure is: a. The time overhead the first reporting point after take-off b. The time at which the flight plan is filed c. The estimated off-block time d. The time of take-off

Description : For a flight plan filed before flight, the indicated time of departure is: a. The time overhead the first reporting point after take-off b. The time at which the flight plan is filed c. The estimated off-block time d. The time of take-off

Last Answer : c. The estimated off-block time

What is the Total Elapsed Time on a VFR flight plan? a. From take-off to overhead destination b. From take-off to overhead destination + 15 mins c. From take-off to landing d. From taxi to arrival on the gate

Description : What is the Total Elapsed Time on a VFR flight plan? a. From take-off to overhead destination b. From take-off to overhead destination + 15 mins c. From take-off to landing d. From taxi to arrival on the gate

Last Answer : a. From take-off to overhead destination

For a controlled flight before departure, a flight plan must be filed at least: a. 50 minutes before off-block time b. 60 minutes before departure c. 10 minutes before departure d. 30 minutes before off-block time

Description : For a controlled flight before departure, a flight plan must be filed at least: a. 50 minutes before off-block time b. 60 minutes before departure c. 10 minutes before departure d. 30 minutes before off-block time

Last Answer : b. 60 minutes before departure

In the event of an act of unlawful interference, which of the following is the correct procedure to be taken by the pilot in command? a. Squawk 7700 if the situation requires and continue the flight as per the ATC clearance received if possible b. Squawk 7500 and broadcast a warning to ATC other traffic on 121.500MHz or the frequency in use whilst maintaining the flight as cleared c. Squawk 7500 (or 7700 if required) and broadcast a warning if the situation forces deviation from the cleared flight plan d. If forced to deviate from the flight plan, climb or descend to altitudes that differ from the normal cruising altitudes by 1000ft

Description : In the event of an act of unlawful interference, which of the following is the correct procedure to be taken by the pilot in command? a. Squawk 7700 if the situation requires and continue ... the flight plan, climb or descend to altitudes that differ from the normal cruising altitudes by 1000ft

Last Answer : c. Squawk 7500 (or 7700 if required) and broadcast a warning if the situation forces deviation from the cleared flight plan

In flight, it is possible to: i. File an IFR flight plan ii. Modify an active flight plan iii. Cancel a VFR flight plan iv. Close a VFR flight plan (rules of the air ann2 3.3.5) a. i and ii b. i, ii, iii and iv c. ii, iii and iv d. i and iv

Description : In flight, it is possible to: i. File an IFR flight plan ii. Modify an active flight plan iii. Cancel a VFR flight plan iv. Close a VFR flight plan (rules of the air ann2 3.3.5) a. i and ii b. i, ii, iii and iv c. ii, iii and iv d. i and iv

Last Answer : b. i, ii, iii and iv

How many hours in advance of departure time should a flight plan be filed in the case of flights into areas subject to air traffic flow management (ATFM)? a. 3.00 hrs b. 0.30 hrs c. 1.00 hr d. 0.10 hr

Description : How many hours in advance of departure time should a flight plan be filed in the case of flights into areas subject to air traffic flow management (ATFM)? a. 3.00 hrs b. 0.30 hrs c. 1.00 hr d. 0.10 hr

Last Answer : a. 3.00 hrs

If an ATC clearance is not suitable, the PIC may: a. Offer ATC an acceptable clearance b. Request and if practicable accept an amended clearance c. Demand an alternative clearance and ATC must comply d. Decline the clearance on the grounds that it is not in accordance with the field flight plan

Description : If an ATC clearance is not suitable, the PIC may: a. Offer ATC an acceptable clearance b. Request and if practicable accept an amended clearance c. Demand an alternative clearance and ATC must ... d. Decline the clearance on the grounds that it is not in accordance with the field flight plan

Last Answer : b. Request and if practicable accept an amended clearance

If no ICAO identifier has been attributed to an aerodrome, what should be entered in Box 16 of the Flight Plan? a. ZZZZ b. NNNN c. A/N d. A/D XXX

Description : If no ICAO identifier has been attributed to an aerodrome, what should be entered in Box 16 of the Flight Plan? a. ZZZZ b. NNNN c. A/N d. A/D XXX

Last Answer : a. ZZZZ

What is required for an IFR flight in advisory airspace? a. No flight plan required b. Flight plan required and PIC must notify of any changes regardless if wanting advisory service or not c. Flight plan required but PIC need not notify of any changes d. A flight plan is only required if advisory service is required

Description : What is required for an IFR flight in advisory airspace? a. No flight plan required b. Flight plan required and PIC must notify of any changes regardless if wanting advisory service or not c ... need not notify of any changes d. A flight plan is only required if advisory service is required

Last Answer : b. Flight plan required and PIC must notify of any changes regardless if wanting advisory service or not

When the Captain cannot comply with an ATC clearance: a. The Captain must accept the ATC clearance, because it is based on a filed flight plan b. He/she may request an amended clearance and, if executable, he/she will accept that clearance c. He/she may ask a new clearance and the appropriate ATC must grant him/her that clearance d. He/she may suggest a new clearance to ATC

Description : When the Captain cannot comply with an ATC clearance: a. The Captain must accept the ATC clearance, because it is based on a filed flight plan b. He/she may request an amended clearance and, if ... appropriate ATC must grant him/her that clearance d. He/she may suggest a new clearance to ATC

Last Answer : b. He/she may request an amended clearance and, if executable, he/she will accept that clearance

A controlled flight is required to inform the concerned ATC unit when the average TAS at cruising level deviates or is expected to deviate compared to that given TAS in the Flight Plan by at least plus or minus: a. 10% b. 3% c. 5% d. 2%

Description : A controlled flight is required to inform the concerned ATC unit when the average TAS at cruising level deviates or is expected to deviate compared to that given TAS in the Flight Plan by at least plus or minus: a. 10% b. 3% c. 5% d. 2%

Last Answer : d. 2%

An aircraft has a stalling speed in level flight of 70kt IAS. In a 60° balanced turn, the stalling speed would be: a. 76kt b. 84kt c. 99kt d. 140kt

Description : An aircraft has a stalling speed in level flight of 70kt IAS. In a 60° balanced turn, the stalling speed would be: a. 76kt b. 84kt c. 99kt d. 140kt

Last Answer : c. 99kt

The purpose of a trim tab is: a. To assist the pilot in initiating movement of the controls b. To zero the load on the pilot controls in the flight attitude required c. To provide feel to the controls at high speed d. To increase the effectiveness of the controls

Description : The purpose of a trim tab is: a. To assist the pilot in initiating movement of the controls b. To zero the load on the pilot controls in the flight attitude required c. To provide feel to the controls at high speed d. To increase the effectiveness of the controls

Last Answer : b. To zero the load on the pilot controls in the flight attitude required

The stalling speed of an aeroplane is most affected by: a. Changes in air density b. Variations in aeroplane loading c. Variations in flight altitude d. Changes in pitch attitude

Description : The stalling speed of an aeroplane is most affected by: a. Changes in air density b. Variations in aeroplane loading c. Variations in flight altitude d. Changes in pitch attitude

Last Answer : b. Variations in aeroplane loading

At the alternate aerodrome, the commander of a turbojet engine aeroplane should have a fuel quantity (final reserve) sufficient for flying during: a. 30 minutes at holding flight speed at 1,500 ft b. 45 minutes at holding flight speed at 1,500 ft c. 30 minutes at cruising speed d. 45 minutes at cruising speed

Description : At the alternate aerodrome, the commander of a turbojet engine aeroplane should have a fuel quantity (final reserve) sufficient for flying during: a. 30 minutes at holding flight speed at 1,500 ft b. 45 ... speed at 1,500 ft c. 30 minutes at cruising speed d. 45 minutes at cruising speed

Last Answer : a. 30 minutes at holding flight speed at 1,500 ft

From a pre-flight briefing you know a jet stream is at 31,000ft whilst you are at FL270. You experience moderate CAT. What would be the best course of action? a. Stay level b. Descend c. Climb d. Reduce speed

Description : From a pre-flight briefing you know a jet stream is at 31,000ft whilst you are at FL270. You experience moderate CAT. What would be the best course of action? a. Stay level b. Descend c. Climb d. Reduce speed

Last Answer : b. Descend

What is normally the most effective measure to reduce or avoid CAT effects? a. Change of flight level b. Change of course c. Increase of speed d. Decrease of speed

Description : What is normally the most effective measure to reduce or avoid CAT effects? a. Change of flight level b. Change of course c. Increase of speed d. Decrease of speed

Last Answer : a. Change of flight level

Maximum endurance: a. Can be achieved in level unaccelerated flight with minimum fuel consumption b. Can be achieved by flying at the best rate of climb speed in straight and level flight c. Can be achieved in a steady climb d. Can be achieved by flying at the absolute ceiling

Description : Maximum endurance: a. Can be achieved in level unaccelerated flight with minimum fuel consumption b. Can be achieved by flying at the best rate of climb speed in straight and level flight c. Can be achieved in a steady climb d. Can be achieved by flying at the absolute ceiling

Last Answer : a. Can be achieved in level unaccelerated flight with minimum fuel consumption

The EGT indication on a piston engine is used: a. To control the cooling air shutters b. To monitor the oil temperature c. To assist the pilot to adjust the fuel mixture d. To indicate cylinder head temperature

Description : The EGT indication on a piston engine is used: a. To control the cooling air shutters b. To monitor the oil temperature c. To assist the pilot to adjust the fuel mixture d. To indicate cylinder head temperature

Last Answer : c. To assist the pilot to adjust the fuel mixture

When does a pilot apply the limitations of the MEL? a. At parking before commencement of taxi b. Prior to take-off c. At any time in flight d. Any time up to coming to a complete stop and applying the parking brake

Description : When does a pilot apply the limitations of the MEL? a. At parking before commencement of taxi b. Prior to take-off c. At any time in flight d. Any time up to coming to a complete stop and applying the parking brake

Last Answer : d. Any time up to coming to a complete stop and applying the parking brake

A flight is to depart from an airport with runway 09 and 27. Surface wind is 270/05; an inversion is reported at 300 feet with turbulence and wind shear. The wind just above the inversion is 090/30. What is the safest departure procedure? a. Take-off is not possible under these conditions b. Depart on runway 09 with a tailwind c. Depart runway 27 with maximum throttle during the passage through the inversion d. Depart runway 27 with as steep an ascent as possible

Description : A flight is to depart from an airport with runway 09 and 27. Surface wind is 270/05; an inversion is reported at 300 feet with turbulence and wind shear. The wind just above the ... throttle during the passage through the inversion d. Depart runway 27 with as steep an ascent as possible

Last Answer : b. Depart on runway 09 with a tailwind

What minimum ground visibility is required to enable a SVFR flight to take off from an aerodrome in a CTR? a. 1000m b. 1500m c. 2000m d. 3000m

Description : What minimum ground visibility is required to enable a SVFR flight to take off from an aerodrome in a CTR? a. 1000m b. 1500m c. 2000m d. 3000m

Last Answer : b. 1500m

When does the engine High Pressure fuel shut off valve close? a. After a booster pump failure b. When the engine fuel switch is selected ‘ON’ during engine start c. When flight idle is selected d. When the engine fuel switch is selected ‘OFF’ during engine shut-down

Description : When does the engine High Pressure fuel shut off valve close? a. After a booster pump failure b. When the engine fuel switch is selected ‘ON’ during engine start c. When flight idle is selected d. When the engine fuel switch is selected ‘OFF’ during engine shut-down

Last Answer : d. When the engine fuel switch is selected ‘OFF’ during engine shut-down

Which of the following would give the greatest gliding performance? a. Flight at VMD b. Flight at 1.32VMD c. Flight at the best CL/CD ratio d. Flight close to CL MAX

Description : Which of the following would give the greatest gliding performance? a. Flight at VMD b. Flight at 1.32VMD c. Flight at the best CL/CD ratio d. Flight close to CL MAX

Last Answer : d. Flight close to CL MAX

Where are icing conditions on route specified? a. TAF and METAR b. METAR and SIGMET c. SWC (sig. weather chart) and SIGMET d. SPECI and TREND

Description : Where are icing conditions on route specified? a. TAF and METAR b. METAR and SIGMET c. SWC (sig. weather chart) and SIGMET d. SPECI and TREND

Last Answer : c. SWC (sig. weather chart) and SIGMET

An urgency message should include the following information: a. Name of station addressed, aircraft callsign, nature of urgency condition, intention of commander, position, level, heading b. Callsign, position, route, destination, endurance c. Name of station addressed, callsign, present positin, level, ETA destination d. Captain’s number, rank and name

Description : An urgency message should include the following information: a. Name of station addressed, aircraft callsign, nature of urgency condition, intention of commander, position, level, heading b. Callsign ... , callsign, present positin, level, ETA destination d. Captain's number, rank and name

Last Answer : a. Name of station addressed, aircraft callsign, nature of urgency condition, intention of commander, position, level, heading

To give the best obstacle clearance on take-off, take-off should be made with: a. Flaps partially extended and at best rate of climb speed (Vy) b. Flaps partially extended and at best angle of climb speed (Vx) c. Flaps retracted and at best rate of climb speed (Vy) d. Flaps retracted and at best angle of climb speed (Vx)

Description : To give the best obstacle clearance on take-off, take-off should be made with: a. Flaps partially extended and at best rate of climb speed (Vy) b. Flaps partially extended and at best angle of climb ... at best rate of climb speed (Vy) d. Flaps retracted and at best angle of climb speed (Vx)

Last Answer : d. Flaps retracted and at best angle of climb speed (Vx)

What flight condition should be expected when an aircraft leaves ground effect? a. A decrease in parasite drag permitting a lower angle of attack b. An increase induced drag and a requirement for a higher angle of attack c. An increase in dynamic stability d. A decrease in induced drag requiring a smaller angle of attack

Description : What flight condition should be expected when an aircraft leaves ground effect? a. A decrease in parasite drag permitting a lower angle of attack b. An increase induced drag and a requirement ... increase in dynamic stability d. A decrease in induced drag requiring a smaller angle of attack

Last Answer : b. An increase induced drag and a requirement for a higher angle of attack

To ensure some degree of longitudinal stability in flight, the position of the CG: a. Must always coincide with the AC b. Must be forward of the Neutral Point c. Must be aft of the Neutral Point d. Must not be forward of the aft CG limi

Description : To ensure some degree of longitudinal stability in flight, the position of the CG: a. Must always coincide with the AC b. Must be forward of the Neutral Point c. Must be aft of the Neutral Point d. Must not be forward of the aft CG limi

Last Answer : b. Must be forward of the Neutral Point