____is used to control the cache with two new control bits not present in the 80386 microprocessor. What are the bits used to control the 8K byte cache? a) CR0, CD, NW b) CR0, NW, PWT c) Control Register Zero, PWT, PCD d) none

____is used to control the cache with two new control bits not present in the 80386 microprocessor. What are the bits used to control the 8K byte cache? a) CR0, CD, NW b) CR0, NW, PWT
c) Control Register Zero, PWT, PCD
d) none
by

1 Answer

Answer :

d) none
by

Related questions

The processor 80386/80486 and the Pentium processor uses _____ bits address bus: a. 16 b. 32 c. 36 d. 64

Description : The processor 80386/80486 and the Pentium processor uses _____ bits address bus: a. 16 b. 32 c. 36 d. 64

Last Answer : b. 32

A stack pointer is a. a 16-bit register in the microprocessor that indicate the beginning of the stack memory. b. a register that decodes and executes 16-bit arithmetic expression. c. The first memory location where a subroutine address is stored. d. a register in which flag bits are stored

Description : A stack pointer is a. a 16-bit register in the microprocessor that indicate the beginning of the stack memory. b. a register that decodes and executes 16-bit arithmetic expression. c. The first memory location where a subroutine address is stored. d. a register in which flag bits are stored

Last Answer : a. a 16-bit register in the microprocessor that indicate the beginning of the stack memory.

A microprocessor retries instructions from : a. Control memory b. Cache memory c. Main memory d. Virtual memory

Description : A microprocessor retries instructions from : a. Control memory b. Cache memory c. Main memory d. Virtual memory

Last Answer : c. Main memory

In an 8085 microprocessor, the instruction CMP B has been executed while the contentsof accumulator is less than that of register B. As a result carry flag and zero flag will berespectively (A) set, reset (B) reset, set (C) reset, reset (D) set, set

Description : In an 8085 microprocessor, the instruction CMP B has been executed while the contentsof accumulator is less than that of register B. As a result carry flag and zero flag will berespectively (A) set, reset (B) reset, set (C) reset, reset (D) set, set

Last Answer : (A) set, reset

Which is the components of microprocessor: a. Register unit b. Arithmetic and logical unit c. Timing and control unit d. All of these

Description : Which is the components of microprocessor: a. Register unit b. Arithmetic and logical unit c. Timing and control unit d. All of these

Last Answer : d. All of these

Which is the microprocessor comprises: a. Register section b. One or more ALU c. Control unit d. All of these

Description : Which is the microprocessor comprises: a. Register section b. One or more ALU c. Control unit d. All of these

Last Answer : d. All of these

A 32 bit microprocessor has the word length equal to a. 2 byte b. 32 byte c. 4 byte d. 8 byte

Description : A 32 bit microprocessor has the word length equal to a. 2 byte b. 32 byte c. 4 byte d. 8 byte

Last Answer : c. 4 byte

A collection of 8 bits is called a. byte b. word c. record

Description : A collection of 8 bits is called a. byte b. word c. record

Last Answer : a. byte

Because we wish to allow each ASCII code to occupy one location in memory, most memories are _____ addressable. a. BYTE b. NIBBLE c. WORD (16 bits) d. DOUBLEWORD (32 bits)

Description : Because we wish to allow each ASCII code to occupy one location in memory, most memories are _____ addressable. a. BYTE b. NIBBLE c. WORD (16 bits) d. DOUBLEWORD (32 bits)

Last Answer : a. BYTE

The original ASCII code used…bits of each byte, reserving that last bit for error checking a. 5 b. 6 c. 7 d. 8

Description : The original ASCII code used…bits of each byte, reserving that last bit for error checking a. 5 b. 6 c. 7 d. 8

Last Answer : c. 7

A byte consists of a. One bit b. Four bits c. Eight bits d. Sixteen bits

Description : A byte consists of a. One bit b. Four bits c. Eight bits d. Sixteen bits

Last Answer : c. Eight bits

8096 has following features fill up the following, i) ____ Register file, ii) ____ I/O Ports iii) ____ architecture. a) 256 byte, five 8bit, register to register b) 256 byte, four 8bit, register to register c) 232 byte, five 8bit, register to register d) 232 byte, six 8 bit, register to register

Description : 8096 has following features fill up the following, i) ____ Register file, ii) ____ I/O Ports iii) ____ architecture. a) 256 byte, five 8bit, register to register b) 256 byte, four 8bit, register ... c) 232 byte, five 8bit, register to register d) 232 byte, six 8 bit, register to register

Last Answer : c) 232 byte, five 8bit, register to register

The SP is of ___ wide register. And this may be defined anywhere in the ______. a) 8 byte, on-chip 128 byte RAM. b) 8 bit, on chip 256 byte RAM. c) 16 bit,

Description : The SP is of ___ wide register. And this may be defined anywhere in the ______. a) 8 byte, on-chip 128 byte RAM. b) 8 bit, on chip 256 byte RAM. c) 16 bit,

Last Answer : a) 8 byte, on-chip 128 byte RAM.

8096 has following features fill up the following, i) ____ Register file, ii) ____ I/O Ports iii) ____ architecture. a) 256 byte, five 8bit, register to register b) 256 byte, four 8bit, register to register c) 232 byte, five 8bit, register to register d) 232 byte, six 8 bit, register to register

Description : 8096 has following features fill up the following, i) ____ Register file, ii) ____ I/O Ports iii) ____ architecture. a) 256 byte, five 8bit, register to register b) 256 byte, four 8bit, ... c) 232 byte, five 8bit, register to register d) 232 byte, six 8 bit, register to register

Last Answer : d) 232 byte, six 8 bit, register to register

ROM d) 8 bit, on chip 128 byte RAM. 3. After reset, SP register is initialized to address________. a) 8H b) 9H c) 7H d) 6H

Description : ROM d) 8 bit, on chip 128 byte RAM. 3. After reset, SP register is initialized to address________. a) 8H b) 9H c) 7H d) 6H

Last Answer : c) 7H

80386 support overall ___ addressing modes to facilitate efficient execution of higher level language programs. a) 9 b) 10 c) 11 d) 12

Description : 80386 support overall ___ addressing modes to facilitate efficient execution of higher level language programs. a) 9 b) 10 c) 11 d) 12

Last Answer : 11

80386 support which type of descriptor table from the following? a) TDS b) ADS c) GDS d) MDS

Description : 80386 support which type of descriptor table from the following? a) TDS b) ADS c) GDS d) MDS

Last Answer : c) GDS

The interrupt vector table of 80386 has been allocated ______ space starting from _______ to _______. a) 1Kbyte, 00000H, 003FFH b) 2Kbyte, 10000H, 004FFH c) 3Kbyte, 01000H, 007FFH d) 4Kbyte, 01000H, 009FFH

Description : The interrupt vector table of 80386 has been allocated ______ space starting from _______ to _______. a) 1Kbyte, 00000H, 003FFH b) 2Kbyte, 10000H, 004FFH c) 3Kbyte, 01000H, 007FFH d) 4Kbyte, 01000H, 009FFH

Last Answer : c) 3Kbyte, 01000H, 007FFH

If ______input pin of 80386 if activated, allows address pipelining during 80386 bus cycles. a) BS16 b) NA c) PEREQ d) ADS

Description : If ______input pin of 80386 if activated, allows address pipelining during 80386 bus cycles. a) BS16 b) NA c) PEREQ d) ADS

Last Answer : a) BS16

A stack is a. an 8-bit register in the microprocessor b. a 16-bit register in the microprocessor c. a set of memory locations in R/WM reserved for storing information temporarily during the execution of computer

Description : A stack is a. an 8-bit register in the microprocessor b. a 16-bit register in the microprocessor c. a set of memory locations in R/WM reserved for storing information temporarily during the execution of computer

Last Answer : c. a set of memory locations in R/WM reserved for storing information temporarily during the execution of computer

In Microprocessor one of the operands holds a special register called: a. Calculator b. Dedicated c. Accumulator d. None of these

Description : In Microprocessor one of the operands holds a special register called: a. Calculator b. Dedicated c. Accumulator d. None of these

Last Answer : c. Accumulator

Explain Briefly The Flag Register In The 8085 Microprocessor.?

Description : Explain Briefly The Flag Register In The 8085 Microprocessor.?

Last Answer : Answer :The flag register in 8085 is an 8-bit register which contains 5 bit positions. These five flags are of 1bit F/F and are known as zero, sign, carry, parity and auxiliary carry. ... addition and subtraction operations. The parity flag is used for results containing an even number of one's.

The microprocessor can read/write 16 bit data from or to ________ A. memory B. I /O device C. processor D. register

Description : The microprocessor can read/write 16 bit data from or to ________ A. memory B. I /O device C. processor D. register

Last Answer : The microprocessor can read/write 16 bit data from or to memory 

What is the size of SP register in 8085 microprocessor?

Description :  What is the size of SP register in 8085 microprocessor? A) 16 bits B) 8 bits C) 64 bits D) 48 bits

Last Answer :  What is the size of SP register in 8085 microprocessor? A) 16 bits B) 8 bits C) 64 bits D) 48 bits

A structure that stores a number of bits taken "together as a unit" is a a. gate b. mux c. decoder d. register

Description : A structure that stores a number of bits taken "together as a unit" is a a. gate b. mux c. decoder d. register

Last Answer : d. register

Which was the world’s first microcomputer that used Intel 80386 microprocessor chip? A) IBM PS/2 B) HP-9830 C) DeskPro-386 D) IBM-360

Description : Which was the world’s first microcomputer that used Intel 80386 microprocessor chip? A) IBM PS/2 B) HP-9830 C) DeskPro-386 D) IBM-360

Last Answer : Answer : C

CD-ROM a. Is a `semiconductor memory b. Memory register c. Magnetic memory d. None of the above

Description : CD-ROM a. Is a `semiconductor memory b. Memory register c. Magnetic memory d. None of the above

Last Answer : d. None of the above

CD-ROM is a a. Semiconductor memory b. Memory register c. Magnetic memory d. None of above

Description : CD-ROM is a a. Semiconductor memory b. Memory register c. Magnetic memory d. None of above

Last Answer : d. None of above

The ALU of a computer responds to the commands coming from a. Primary memory b. Control section c. External memory d. Cache memory

Description : The ALU of a computer responds to the commands coming from a. Primary memory b. Control section c. External memory d. Cache memory

Last Answer : b. Control section

In 8279 Strobed input mode, the control line goes low. The data on return lines is strobed in the ____. a) FIFO byte by byte b) FILO byte by byte c) LIFO byte by byte d) LILO byte by byte.

Description : In 8279 Strobed input mode, the control line goes low. The data on return lines is strobed in the ____. a) FIFO byte by byte b) FILO byte by byte c) LIFO byte by byte d) LILO byte by byte.

Last Answer : a) FIFO byte by byte

A ____is a group of devices that store digital data: a) circuits b) register c) bit d) None of The Above

Description : A ____is a group of devices that store digital data: a) circuits b) register c) bit d) None of The Above

Last Answer : b) register

Which are the flags of status register: a. Over flow flag b. Carry flag c. Half carry flag d. Zero flag e. Interrupt flag f. Negative flag g. All of these

Description : Which are the flags of status register: a. Over flow flag b. Carry flag c. Half carry flag d. Zero flag e. Interrupt flag f. Negative flag g. All of these

Last Answer : g. All of these

What type of control pins are needed in a microprocessor to regulate traffic on the bus, in order to prevent two devices from trying to use it at the same time? a. Bus control b. Interrupts c. Bus arbitration d. Status

Description : What type of control pins are needed in a microprocessor to regulate traffic on the bus, in order to prevent two devices from trying to use it at the same time? a. Bus control b. Interrupts c. Bus arbitration d. Status

Last Answer : c. Bus arbitration

List the four instructions which control the interrupt structure of the 8085 microprocessor.

Description : List the four instructions which control the interrupt structure of the 8085 microprocessor.

Last Answer : • DI ( Disable Interrupts ) • EI ( Enable Interrupts ) • RIM ( Read Interrupt Masks ) • SIM ( Set Interrupt Masks )

How many bit microprocessor still survives in low-end application such as microwave ovens and small control system: a. 4 bit b. 16 bit c. 32 bit d. 64 bit

Description : How many bit microprocessor still survives in low-end application such as microwave ovens and small control system: a. 4 bit b. 16 bit c. 32 bit d. 64 bit

Last Answer : a. 4 bit

The ALU and control unit of most of the microcomputers are combined and manufacture on a single silicon chip. What is it called? a. monochip b. microprocessor c. ALU d. control unit

Description : The ALU and control unit of most of the microcomputers are combined and manufacture on a single silicon chip. What is it called? a. monochip b. microprocessor c. ALU d. control unit

Last Answer : b. microprocessor

The purpose of the microprocessor is to control ______

Description : The purpose of the microprocessor is to control ______  A. memory B. switches C. processing D. tasks

Last Answer : The purpose of the microprocessor is to control memory 

L2 cache memory is places at ______ a. On Processor b. On Mother Board c. On Memory d. All of these

Description : L2 cache memory is places at ______ a. On Processor b. On Mother Board c. On Memory d. All of these

Last Answer : b. On Mother Board

L1 cache memory is places at ______ a. On Processor b. On Mother Board c. On Memory d. All of these

Description : L1 cache memory is places at ______ a. On Processor b. On Mother Board c. On Memory d. All of these

Last Answer : a. On Processor

Pentium Pro Processor contains: a. L1 Cache b. L2 Cache c. Both L1 & L2 d. None of these

Description : Pentium Pro Processor contains: a. L1 Cache b. L2 Cache c. Both L1 & L2 d. None of these

Last Answer : c. Both L1 & L2

The fetch-execute cycle is to use a system know as: a. Assembly line b. Pipelining c. Cache d. None of these

Description : The fetch-execute cycle is to use a system know as: a. Assembly line b. Pipelining c. Cache d. None of these

Last Answer : b. Pipelining

___ memory system which is discussed later can improve matters in this respect: a. Data memory b. Cache memory c. Memory d. None of these

Description : ___ memory system which is discussed later can improve matters in this respect: a. Data memory b. Cache memory c. Memory d. None of these

Last Answer : b. Cache memory

Which of the following memories has the shortest access times? a. Cache memory b. Magnetic bubble memory c. Magnetic core memory d. RAM

Description : Which of the following memories has the shortest access times? a. Cache memory b. Magnetic bubble memory c. Magnetic core memory d. RAM

Last Answer : a. Cache memory

Which Bus connects CPU & level 2 cache: a. Rear side bus b. Front side bus c. Memory side bus d. None of these

Description : Which Bus connects CPU & level 2 cache: a. Rear side bus b. Front side bus c. Memory side bus d. None of these

Last Answer : b. Front side bus

A set of information that defines the status of resources allocated to a process is a. Process control b. ALU c. Register Unit d. Process description

Description : A set of information that defines the status of resources allocated to a process is a. Process control b. ALU c. Register Unit d. Process description

Last Answer : d. Process description

Steps involved to fetch a byte in 8085

Description : Steps involved to fetch a byte in 8085

Last Answer : i. The PC places the 16-bit memory address on the address bus ii. The control unit sends the control signal RD to enable the memory chip iii. The byte from ... byte is placed in the instruction decoder of the microprocessor and the task is carried out according to the instruction

A name or number used to identify a storage location is called a. A byte b. A record c. An address d. All of above

Description : A name or number used to identify a storage location is called a. A byte b. A record c. An address d. All of above

Last Answer : c. An address

The number of characters that can be stored in given physical space is a. Word length b. Byte c. Data density d. Field

Description : The number of characters that can be stored in given physical space is a. Word length b. Byte c. Data density d. Field

Last Answer : c. Data density

Which of the following magazines covers only the IBM PC and its compatibles? a. Byte b. PC Magazine c. Personal Computing d. Interface Age

Description : Which of the following magazines covers only the IBM PC and its compatibles? a. Byte b. PC Magazine c. Personal Computing d. Interface Age

Last Answer : b. PC Magazine