80386 support overall ___ addressing modes to facilitate efficient execution of higher level language programs. a) 9 b) 10 c) 11 d) 12

80386 support overall ___ addressing modes to facilitate efficient execution of higher level language programs.
a) 9
b) 10 c) 11 d) 12
by

1 Answer

Answer :

11
by

Related questions

A compiler is a translating program which a. Translates instruction of a high level language into machine language b. Translates entire source program into machine language program c. It is not involved in program’s execution d. All of above

Description : A compiler is a translating program which a. Translates instruction of a high level language into machine language b. Translates entire source program into machine language program c. It is not involved in program’s execution d. All of above

Last Answer : d. All of above

In 8096, mode ____ of serial port are ___ modes commonly used for ____ communications. a) 1, 8bit, single processor b) 0, 7bit, multiple microcontroller c) 2, 9 bit, multiple processors d) 3, 8 bit, multiple microcontroller

Description : In 8096, mode ____ of serial port are ___ modes commonly used for ____ communications. a) 1, 8bit, single processor b) 0, 7bit, multiple microcontroller c) 2, 9 bit, multiple processors d) 3, 8 bit, multiple microcontroller

Last Answer : a) 1, 8bit, single processor

In 8096, mode ____ of serial port are ___ modes commonly used for ____ communications. a) 1, 8bit, single processor b) 0, 7bit, multiple microcontroller c) 2, 9 bit, multiple processors d) 3, 8 bit, multiple microcontroller

Description : In 8096, mode ____ of serial port are ___ modes commonly used for ____ communications. a) 1, 8bit, single processor b) 0, 7bit, multiple microcontroller c) 2, 9 bit, multiple processors d) 3, 8 bit, multiple microcontroller

Last Answer : c) 2, 9 bit, multiple processors

80386 support which type of descriptor table from the following? a) TDS b) ADS c) GDS d) MDS

Description : 80386 support which type of descriptor table from the following? a) TDS b) ADS c) GDS d) MDS

Last Answer : c) GDS

What is the use of addressing modes, mention the different types

Description : What is the use of addressing modes, mention the different types

Last Answer : The various formats of specifying the operands are called addressing modes, it is used to access the operands or data. The different types are as follows • Immediate addressing • Register addressing • Direct addressing • Indirect addressing • Implicit addressing

Enlist any four addressing modes of 8086 microprocessor.

Description : Enlist any four addressing modes of 8086 microprocessor.

Last Answer : Addressing modes of 8086 : 1. Immediate 2. Direct 3. Register 4. Register indirect 5. Indexed 6. Register relative 7. Based indexed 8. Relative based indexed 9. Implied

The processor 80386/80486 and the Pentium processor uses _____ bits address bus: a. 16 b. 32 c. 36 d. 64

Description : The processor 80386/80486 and the Pentium processor uses _____ bits address bus: a. 16 b. 32 c. 36 d. 64

Last Answer : b. 32

____is used to control the cache with two new control bits not present in the 80386 microprocessor. What are the bits used to control the 8K byte cache? a) CR0, CD, NW b) CR0, NW, PWT c) Control Register Zero, PWT, PCD d) none

Description : ____is used to control the cache with two new control bits not present in the 80386 microprocessor. What are the bits used to control the 8K byte cache? a) CR0, CD, NW b) CR0, NW, PWT c) Control Register Zero, PWT, PCD d) none

Last Answer : d) none

The interrupt vector table of 80386 has been allocated ______ space starting from _______ to _______. a) 1Kbyte, 00000H, 003FFH b) 2Kbyte, 10000H, 004FFH c) 3Kbyte, 01000H, 007FFH d) 4Kbyte, 01000H, 009FFH

Description : The interrupt vector table of 80386 has been allocated ______ space starting from _______ to _______. a) 1Kbyte, 00000H, 003FFH b) 2Kbyte, 10000H, 004FFH c) 3Kbyte, 01000H, 007FFH d) 4Kbyte, 01000H, 009FFH

Last Answer : c) 3Kbyte, 01000H, 007FFH

If ______input pin of 80386 if activated, allows address pipelining during 80386 bus cycles. a) BS16 b) NA c) PEREQ d) ADS

Description : If ______input pin of 80386 if activated, allows address pipelining during 80386 bus cycles. a) BS16 b) NA c) PEREQ d) ADS

Last Answer : a) BS16

What is a compiler? A) A compiler does a conversion line by line as the program is run B) A compiler converts the whole of a higher level program code into machine code in one step C) A compiler is a general purpose language providing very efficient execution D) None of the above

Description : What is a compiler? A) A compiler does a conversion line by line as the program is run B) A compiler converts the whole of a higher level program code into machine code in one step C) A compiler is a general purpose language providing very efficient execution D) None of the above

Last Answer : Answer : B

In length instruction some programs wants a complex instruction set containing more instruction, more addressing modes and greater address rang, as in case of a. RISC b. CISC c. Both d. None

Description : In length instruction some programs wants a complex instruction set containing more instruction, more addressing modes and greater address rang, as in case of a. RISC b. CISC c. Both d. None

Last Answer : b. CISC

IPv6 does not support which of the following addressing modes? a. unicast addressing b. multicast addressing c. broadcast addressing d. anycast addressing

Description : IPv6 does not support which of the following addressing modes? a. unicast addressing b. multicast addressing c. broadcast addressing d. anycast addressing

Last Answer : c. broadcast addressing

A compiler is a translating program which A) Translates instruction of a high level language into machine language B) Translates entire source program into machine language program C) It is not involved in program’s execution D) All of above

Description : A compiler is a translating program which A) Translates instruction of a high level language into machine language B) Translates entire source program into machine language program C) It is not involved in program’s execution D) All of above

Last Answer : Answer : D

A compiler is a translating program which a. Translates instruction of a high level language into machine language b. Translates entire source program into machine language program c. It is not involved in program’s execution d. All of above

Description : A compiler is a translating program which a. Translates instruction of a high level language into machine language b. Translates entire source program into machine language program c. It is not involved in program’s execution d. All of above

Last Answer : All of above

In immediate addressing the operand is placed a. in the CPU register b. after OP code in the instruction c. in memory d. in stack

Description : In immediate addressing the operand is placed a. in the CPU register b. after OP code in the instruction c. in memory d. in stack

Last Answer : b. after OP code in the instruction

The most common addressing techiniques employed by a CPU is a. immediate b. direct c. indirect d. register e. all of the above

Description : The most common addressing techiniques employed by a CPU is a. immediate b. direct c. indirect d. register e. all of the above

Last Answer : e. all of the above

What's an efficient, low-cost, secure way to facilitate an online support group?

Description : What's an efficient, low-cost, secure way to facilitate an online support group?

Last Answer : Is this about the ‘Live up to Your Potential’ support group?

In modes 2 and 3, if _____ bit of SCON bit is set will causes enable multiprocessor communication and is of ____ bit address. a) SM1, 9EH b) TB8 , 9CH c) SM2 , 9DH d) SM0, 9FH

Description : In modes 2 and 3, if _____ bit of SCON bit is set will causes enable multiprocessor communication and is of ____ bit address. a) SM1, 9EH b) TB8 , 9CH c) SM2 , 9DH d) SM0, 9FH

Last Answer : c) SM2 , 9DH

In serial communication modes, mode 1 the Baud rate = a) BR=2SMOD/32 * (Timer 0 over flow rate) b) BR=2SMOD/16 * (Timer 1 over flow rate) c) BR=2SMOD/16 * (Timer 0 over flow rate) d) BR=2SMOD/32 * (Timer 1 over flow rate)

Description : In serial communication modes, mode 1 the Baud rate = a) BR=2SMOD/32 * (Timer 0 over flow rate) b) BR=2SMOD/16 * (Timer 1 over flow rate) c) BR=2SMOD/16 * (Timer 0 over flow rate) d) BR=2SMOD/32 * (Timer 1 over flow rate)

Last Answer : b) BR=2SMOD/16 * (Timer 1 over flow rate)

In 8255, under the I/O mode of operation we have __ modes. Under which mode will have the following features i) A 5 bit control port is available. ii) Three I/O lines are available at Port C. a) 3, Mode2 b) 2, Mode 2 c) 4, Mode 3 d) 3, Mode 2

Description : In 8255, under the I/O mode of operation we have __ modes. Under which mode will have the following features i) A 5 bit control port is available. ii) Three I/O lines are available at Port C. a) 3, Mode2 b) 2, Mode 2 c) 4, Mode 3 d) 3, Mode 2

Last Answer : a) 3, Mode2

How many synchronous and asynchronous modes are there in serial port of 8096? M. Krishna Kumar/IISc. Bangalore M5/V1/June 04/1 Microprocessors and Microcontrollers/ Multiple Choice Questions Architecture of Micro controllers a) 2, 2 respectively b) 3,1 respectively c) 1, 3 respectively d) 1, 2 respectively

Description : How many synchronous and asynchronous modes are there in serial port of 8096? M. Krishna Kumar/IISc. Bangalore M5/V1/June 04/1 Microprocessors and Microcontrollers/ Multiple Choice Questions Architecture of Micro ... 2, 2 respectively b) 3,1 respectively c) 1, 3 respectively d) 1, 2 respectively

Last Answer : c) 1, 3 respectively

How many address lines are needed to address each memory locations in a 2048 x 4 memory chip? a. 10 b. 11 c. 8 d. 12

Description : How many address lines are needed to address each memory locations in a 2048 x 4 memory chip? a. 10 b. 11 c. 8 d. 12

Last Answer : b. 11

How many address lines are needed to address each memory location in a 2048 x 4 memory chip? a. 10 b. 11 c. 8 d. 12

Description : How many address lines are needed to address each memory location in a 2048 x 4 memory chip? a. 10 b. 11 c. 8 d. 12

Last Answer : b. 11

how many address lines are needed to address each machine location in a 2048 x 4 memory chip? a. 10 b. 11 c. 8 d. 12

Description : how many address lines are needed to address each machine location in a 2048 x 4 memory chip? a. 10 b. 11 c. 8 d. 12

Last Answer : b. 11

List the various addressing modes of DSPs.

Description : List the various addressing modes of DSPs.

Last Answer : Immediate Addressing Absolute Addressing Accumulator Addressing Direct Addressing Indirect Addressing Memory-Mapped Register Addressing Stack Addressing

Assume a two address format specified as source, destination. Examine the following sequence of instruction and explain the addressing modes used and the operation done in every instruction?

Description : Assume a two address format specified as source, destination. Examine the following sequence of instruction and explain the addressing modes used and the operation done in every instruction?

Last Answer : 1. Move (R5) +, R0 2. Add (R5) +, R0. 3. Move (R0), (R5) 4. Move 16(R5), R3 5. Add #40, R5

Define Addressing Modes?

Description : Define Addressing Modes?

Last Answer : The different ways in which the operands of an instruction are specified are called as addressing modes. The MIPS addressing modes are the following: 1. Immediate addressing 2. Register addressing 3. Base or displacement addressing 4. PC-relative addressing 5. Pseudo direct addressing

Explain All The Addressing Modes Of The 8085 With The Help Of Examples.?

Description : Explain All The Addressing Modes Of The 8085 With The Help Of Examples.?

Last Answer : Answer :The various types of addressing modes of the 8085 are as follows: Direct addressing: The instructions in itself contain the opearand. For ex. STA5513H or in/out instructions such as IN PORT C. ... etc. Implicit addressing: this form of addressing contains no operands. For ex. RAR, CMA etc.

Name 5 Different Addressing Modes?

Description : Name 5 Different Addressing Modes?

Last Answer : Answer :Immediate, Direct, Register, Register indirect, Implied addressing modes.

List out any two instructions of following addressing modes: (i) Immediate addressing. (ii) Register addressing.

Description : List out any two instructions of following addressing modes: (i) Immediate addressing. (ii) Register addressing.

Last Answer : (i) Immediate addressing instructions: 1. MOV A, #36H 2. MOV DPTR, #27A2H (ii) Register addressing. 1. MOV A, R0 2. MOV R7, A

List out features of any four addressing modes of 8051.

Description : List out features of any four addressing modes of 8051.

Last Answer : 1.Immediate addressing mode: In this Immediate Addressing Mode, the data is provided in the instruction itself. The data is provided immediately after the opcode. These are some examples of Immediate Addressing Mode. MOVA ... us see some examples of this mode. MOV 0E5H, @R0 MOV @R1, 80H

A stack is a. an 8-bit register in the microprocessor b. a 16-bit register in the microprocessor c. a set of memory locations in R/WM reserved for storing information temporarily during the execution of computer

Description : A stack is a. an 8-bit register in the microprocessor b. a 16-bit register in the microprocessor c. a set of memory locations in R/WM reserved for storing information temporarily during the execution of computer

Last Answer : c. a set of memory locations in R/WM reserved for storing information temporarily during the execution of computer

Pipelining strategy is called implement a. instruction execution b. instruction prefetch c. instruction decoding d. instruction manipulation

Description : Pipelining strategy is called implement a. instruction execution b. instruction prefetch c. instruction decoding d. instruction manipulation

Last Answer : b. instruction prefetch

Time during which a job is processed by the computer is a. Delay times b. Real time c. Execution time d. Down time

Description : Time during which a job is processed by the computer is a. Delay times b. Real time c. Execution time d. Down time

Last Answer : b. Real time

Why 8087 is referred to as Coprocessor? i) Because 8087 is used in parallel with main processor in a system, rather than serving as a main processor itself. ii) Because 8087 is used in serial with main processor in a system, rather than serving as a main processor itself. iii) Because main Microprocessor handles the general program execution and the 8087 handles specialized math computations. a) i & iii b) ii & iii c) iii only. d) i only.

Description : Why 8087 is referred to as Coprocessor? i) Because 8087 is used in parallel with main processor in a system, rather than serving as a main processor itself. ii) Because 8087 is used in serial with main processor in a ... math computations. a) i & iii b) ii & iii c) iii only. d) i only.

Last Answer : c) iii only.

___ memory system which is discussed later can improve matters in this respect: a. Data memory b. Cache memory c. Memory d. None of these

Description : ___ memory system which is discussed later can improve matters in this respect: a. Data memory b. Cache memory c. Memory d. None of these

Last Answer : b. Cache memory

The value memvar must be transferred to the ___: a. Computer b. CPU c. Both A and B d. None of these

Description : The value memvar must be transferred to the ___: a. Computer b. CPU c. Both A and B d. None of these

Last Answer : b. CPU

The CPU removes the ___ signal to complete the memory write operation: a. Read b. Write c. Both A and B d. None of these

Description : The CPU removes the ___ signal to complete the memory write operation: a. Read b. Write c. Both A and B d. None of these

Last Answer : a. Read

Which point to the ___ of the stack: a. TOP b. START c. MID

Description : Which point to the ___ of the stack: a. TOP b. START c. MID

Last Answer : a. TOP

The ___ bit decides whether it is a system descriptor or code/data segment descriptor a) P b) S c) D d) G

Description : The ___ bit decides whether it is a system descriptor or code/data segment descriptor a) P b) S c) D d) G

Last Answer : a) P

SP of 8051 is of ___ wide and it is loaded with the default value of ___ after reset. a) 2 byte, 08H b) 8 bit, 07H c) 1 byte, 09H d) 8 bit, 06H

Description : SP of 8051 is of ___ wide and it is loaded with the default value of ___ after reset. a) 2 byte, 08H b) 8 bit, 07H c) 1 byte, 09H d) 8 bit, 06H

Last Answer : d) 8 bit, 06H

8096 write-protected mode, no code can write to memory address between __. a) 2020 to 3FFFH b) 8000 to FFFFH c) 2000 to 3FFFH d) 2020 to 202FH 17. If the __ pin is ___ , then we have the option of using the ____ ROM or EPROM together with _____ memory and devices. a) EA, high, internal, external b) EA, low, internal, external c) EA, high, external, internal d) EA, low, external, internal

Description : 8096 write-protected mode, no code can write to memory address between __. a) 2020 to 3FFFH b) 8000 to FFFFH c) 2000 to 3FFFH d) 2020 to 202FH 17. If the __ pin is ___ , then we have the option ... b) EA, low, internal, external c) EA, high, external, internal d) EA, low, external, internal

Last Answer : c) EA, high, external, internal

8096 has ___ general purpose I/O ports, Port 2 includes ______ of the following i) two quasi-bidirectional I/O lines ii) two output lines iii) four input lines iv) open drain outputs a) 4, i, iv b) 6, ii, iii c) 4, i,ii,iii d) 6, i, ii, iv

Description : 8096 has ___ general purpose I/O ports, Port 2 includes ______ of the following i) two quasi-bidirectional I/O lines ii) two output lines iii) four input lines iv) open drain outputs a) 4, i, iv b) 6, ii, iii c) 4, i,ii,iii d) 6, i, ii, iv

Last Answer : c) 4, i,ii,iii

Intel 8096 is of ___ bit microcontroller family called as ______. a) 8, MCS51 b) 16, MCS51 c) 8, MCS96 d) 16, MCS96

Description : Intel 8096 is of ___ bit microcontroller family called as ______. a) 8, MCS51 b) 16, MCS51 c) 8, MCS96 d) 16, MCS96

Last Answer : d) 16, MCS96

The SP is of ___ wide register. And this may be defined anywhere in the ______. a) 8 byte, on-chip 128 byte RAM. b) 8 bit, on chip 256 byte RAM. c) 16 bit,

Description : The SP is of ___ wide register. And this may be defined anywhere in the ______. a) 8 byte, on-chip 128 byte RAM. b) 8 bit, on chip 256 byte RAM. c) 16 bit,

Last Answer : a) 8 byte, on-chip 128 byte RAM.

___ Connection and the _______ instruction will solve the problem of synchronization between processor and coprocessor. a) INT & NMI, WAIT b) RQ/GT0 & RQ/GT1, FWAIT c) BUSY & TEST, FWAIT d) S0 & QS0, WAIT

Description : ___ Connection and the _______ instruction will solve the problem of synchronization between processor and coprocessor. a) INT & NMI, WAIT b) RQ/GT0 & RQ/GT1, FWAIT c) BUSY & TEST, FWAIT d) S0 & QS0, WAIT

Last Answer : b) RQ/GT0 & RQ/GT1, FWAIT

In 8279, a scanned sensor matrix mode, if a sensor changes its state, the ___ line goes ____ to interrupt the CPU. a) CS, high b) A0, high c) IRQ, high d) STB, high

Description : In 8279, a scanned sensor matrix mode, if a sensor changes its state, the ___ line goes ____ to interrupt the CPU. a) CS, high b) A0, high c) IRQ, high d) STB, high

Last Answer : c) IRQ, high

If the __ pin is ___ , then we have the option of using the ____ ROM or EPROM together with _____ memory and devices. a) EA, high, internal, external b) EA, low, internal, external c) EA, high, external, internal d) EA, low, external, internal

Description : If the __ pin is ___ , then we have the option of using the ____ ROM or EPROM together with _____ memory and devices. a) EA, high, internal, external b) EA, low, internal, external c) EA, high, external, internal d) EA, low, external, internal

Last Answer : a) EA, high, internal, external

8096 has ___ general purpose I/O ports, Port 2 includes ______ of the following i) two quasi-bidirectional I/O lines ii) two output lines iii) four input lines iv) open drain outputs a) 4, i, iv b) 6, ii, iii c) 4, i,ii,iii d) 6, i, ii, iv

Description : 8096 has ___ general purpose I/O ports, Port 2 includes ______ of the following i) two quasi-bidirectional I/O lines ii) two output lines iii) four input lines iv) open drain outputs a) 4, i, iv b) 6, ii, iii c) 4, i,ii,iii d) 6, i, ii, iv

Last Answer : c) 4, i,ii,iii