For continuously running rolling mills with intermittent loading, the most suitable DC drive is

For continuously running rolling mills with intermittent loading, the most suitable DC drive is 

 (a) DC series motor (b) DC shunt motor (c) DC differentially compound motor (d) DC cumulatively compound motor 
by

1 Answer

Answer :

For continuously running rolling mills with intermittent loading, the most suitable DC drive is DC cumulatively compound motor 

by

Related questions

Suggest the energy conservation techniques in following cases : (i) Motor is running with 70% loaded condition. (ii) Motor is continuously loaded at 50%. (iii) Motor runs with 30% loaded condition but sometimes rises to 50% loading condition. (iv) Motor runs continuously under no-load condition.

Description : Suggest the energy conservation techniques in following cases : (i) Motor is running with 70% loaded condition. (ii) Motor is continuously loaded at 50%. (iii) Motor runs with 30% loaded condition but sometimes rises to 50% loading condition. (iv) Motor runs continuously under no-load condition.

Last Answer : Following are the suggestion the energy conservation techniques in following cases :  (i) Motor is running with 70% loaded condition: Use APFC or IPFC for better power factor improvement. Use ... If possible use low capacity motor for above condition. If possible switch off the motor.

Losses in dc machine..?

Last Answer : Copper losses,iron losses,variable losses , constant losees

Explain concept of back emf in DC machine. State how it governs armature current.

Description : Explain concept of back emf in DC machine. State how it governs armature current. 

Last Answer : Back emf: When the armature of DC machine rotates under the influence of driving torque, the armature conductors move in the magnetic field and cut it and hence emf is induced in them. The ... flow of armature current i.e. it automatically changes the armature current to meet load requirements.

State the function of overload coil and No volt coil in dc motor starter.

Description : State the function of overload coil and No volt coil in dc motor starter.

Last Answer : Function of Overload Coil: When DC motor is overloaded, the overload coil carries the overload current and produces strong magnetic field to attract a plunger, which short the terminals of ... dc motor is prevented from restarting automatically on recovery of supply without starter and protected.

State any four applications of DC shunt motor.

Description : State any four applications of DC shunt motor.

Last Answer : Applications of DC shunt motor: 1) Lathe machines 2) drilling machines 3) milling machines 4) Printing machinery 5) Paper industry 6) centrifugal and reciprocating pumps 7) blowers 8)fans

State the function of commutator in DC generator and name the material used for commutator.

Description : State the function of commutator in DC generator and name the material used for commutator.

Last Answer : Function of Commutator: Commutator converts AC induced in armature winding into DC for external load. Material: i) Commutator segments are made up of Copper. ii) Commutator segments are insulated from each other by Mica.

A DC shunt motor has rated rpm of 480. Certain industrial application requires this motor to run at 540 rpm

Description : A DC shunt motor has rated rpm of 480. Certain industrial application requires this motor to run at 540 rpm for some time. Which speed control will be desirable? A) Ward Leonard control B) Armature ... ) Field resistance control D) It is not possible to run the motor at more than the rated rpm 

Last Answer : A DC shunt motor has rated rpm of 480. Certain industrial application requires this motor to run at 540 rpm for some time. Which speed control will be desirable? A) Ward Leonard control B) Armature ... Field resistance control D) It is not possible to run the motor at more than the rated rpm 

A 50 kW dc shunt is loaded to draw rated armature current at any given speed. When driven

Description : A 50 kW dc shunt is loaded to draw rated armature current at any given speed. When driven  (i) at half the rated speed by armature voltage control and (ii) at 1.5 times the rated speed by field control, the respective output powers ... kW in (i) and 75 kW in (ii) (D) 50 kW in (i) and 50 kW in (ii)

Last Answer : A 50 kW dc shunt is loaded to draw rated armature current at any given speed. When driven  (i) at half the rated speed by armature voltage control and (ii) at 1.5 times the rated speed by field control, the respective output ... kW in (i) and 75 kW in (ii) (D) 50 kW in (i) and 50 kW in (ii)

In a DC machine, which of the following statements is true ?

Description : In a DC machine, which of the following statements is true ?  (A) Compensating winding is used for neutralizing armature reaction while interpole winding is used for producing ... Compensation winding is used for improving commutation while interpole winding is used for producing residual flux

Last Answer : In a DC machine, which of the following statements is true ?  (A) Compensating winding is used for neutralizing armature reaction while interpole winding is used for producing ... Compensation winding is used for improving commutation while interpole winding is used for producing residual flux

What are the slot wedges in a DC machine made of?

Description : What are the slot wedges in a DC machine made of?   (a) Mild steel (b) Silicon steel (c) Fibre (d) Cast iron

Last Answer : What are the slot wedges in a DC machine made of?   (a) Mild steel (b) Silicon steel (c) Fibre (d) Cast iron

Fractional pitch windings are used in DC machines to

Description : Fractional pitch windings are used in DC machines to (A) Reduce copper losses (B) Improve cooling (C) Increase the generated emf (D) Reduce sparking

Last Answer : Fractional pitch windings are used in DC machines to Reduce sparking

Drives on a road suitable for parallel traffic where the road markings separating the traffic lanes are not visible. Where can you drive continuously if the traffic on the road is insignificant? (Cross Test)

Description : In the rightmost traffic lane. In a residential area, outside any residential area in the rightmost traffic lane. In any traffic lane.   

Last Answer : In the far right lane. Explanation: This is clear from the right-of-way obligation in this case. This question can be varied in many ways, depending on whether there are road markings or not, whether ... test book! (cross test / Driving on the road / Driving on a road suitable for parallel traffic)

Name the different types of motors used in vacuum cleaners, phonographic appliances, vending machines, refrigerators, rolling mills, lathes, power factor improvement and cranes.

Description : Name the different types of motors used in vacuum cleaners, phonographic appliances, vending machines, refrigerators, rolling mills, lathes, power factor improvement and cranes.

Last Answer : A: Following motors are used: - Vacuum cleaners- Universal motor. Phonographic appliances - Hysteresis motor. Vending machines - Shaded pole motor. Refrigerators - Capacitor split phase ... Cumulative motors. Lathes - DC shunt motors. Power factor improvement - Synchronous motors.

__________ mills are termed as impactors. (A) Hammer (B) Cage (C) Rolling-compression (D) None of these

Description : __________ mills are termed as impactors. (A) Hammer (B) Cage (C) Rolling-compression (D) None of these

Last Answer : (A) Hammer

Name the types of motors used in vacuum cleaners, phonographic appliances, vending machines, refrigerators, rolling mills, lathes, power factor improvement and cranes.

Description : Name the types of motors used in vacuum cleaners, phonographic appliances, vending machines, refrigerators, rolling mills, lathes, power factor improvement and cranes.

Last Answer : Following motors are used: - Vacuum cleaners- Universal motor. Phonographic appliances - Hysteresis motor. Vending machines - Shaded pole motor. Refrigerators - Capacitor split phase ... Cumulative motors. Lathes - DC shunt motors. Power factor improvement - Synchronous motors.

Types of rolling mills and its applications

Description : Types of rolling mills and its applications

Last Answer : Types of rolling mills and its applications (1) Two-high rolling mill: used in blooming and slabbing mills (2) Three-high rolling mill: used for making plates or sections. (3) Four- ... : This mill is used for rolling stainless steel and other high strength steel sheets of thin gauge.

RBG loading stands for a)Revised Broad gauge loading b) Rolling Broad gauge loading c)Railway Broad gauge loading d) None of above

Description : RBG loading stands for a)Revised Broad gauge loading b) Rolling Broad gauge loading c)Railway Broad gauge loading d) None of above

Last Answer : a)Revised Broad gauge loading

The dc motor used for intermittent high torque loads is

Description : The dc motor used for intermittent high torque loads is  (1) dc series motor (2) dc shunt motor (3) differential compound motor (4) cumulative compound motor

Last Answer : 4 cumulative compound motor

Which D.C. motor will be suitable along with flywheel for intermittent light and heavy loads?

Last Answer : Cumulatively compounded D.C. motor will be suitable along with flywheel for intermittent light and heavy loads.

Describe working of continuously variable transmission with suitable sketch

Description : Describe working of continuously variable transmission with suitable sketch

Last Answer : A Vario-drive consists of two set of split pulleys - drive and driven pulley and drive belt between the pulleys. The drive pulley is fitted to the crankshaft and driven to rear wheel ... driven pulley gets decreased thus a reduced drive ratio between the driven and drive pulleys is obtained.

_______is suitable as a lubricant for heavy-duty applications of rolling contact bearing. (a) Grease (b) Lubricating oil (c) Graphite (d) Air

Description : _______is suitable as a lubricant for heavy-duty applications of rolling contact bearing. (a) Grease (b) Lubricating oil (c) Graphite (d) Air

Last Answer : (b) Lubricating oil

________is suitable as a lubricant for low and moderate loads applications of rolling contact bearing. (a) Grease (b) Lubricating oil (c) Graphite (d) Air

Description : ________is suitable as a lubricant for low and moderate loads applications of rolling contact bearing. (a) Grease (b) Lubricating oil (c) Graphite (d) Air

Last Answer : (a) Grease

State the principle of operation of d.c. motor.

Description : State the principle of operation of d.c. motor.

Last Answer : When a current carrying conductor is placed in a magnetic field, the conductor experiences the force. The magnitude of force is given by F = BIL newton  where F – Force   B – maximum flux density   I – Current   L – Length of conductor

A separately excited d.c. machine is coupled to a 50 Hz, three-phase, 4-pole induction machine as shown in

Description : A separately excited d.c. machine is coupled to a 50 Hz, three-phase, 4-pole induction machine as shown in the figure. The Dc machine is energized first and the machines rotate at 1 600 ... three phase source, the phase sequence being consistent with the direction of rotation. In steady state

Last Answer : A separately excited d.c. machine is coupled to a 50 Hz, three-phase, 4-pole induction machine as shown in the figure. The Dc machine is energized first and the machines rotate at 1 600 1pm. ... rotation. In steady state DC machine acts as a motor and the induction machine acts as a generator  

Hopkinson's test on D.C. machines is conducted at?

Last Answer : Hopkinson's test on D.C. machines is conducted at full-load.

The rolling contact bearings as compared to sliding contact bearings have (a) small overall dimensions (b) accuracy of shaft alignment (c) low starting and low running friction except at very high speeds (d) all the mentioned

Description : The rolling contact bearings as compared to sliding contact bearings have (a) small overall dimensions (b) accuracy of shaft alignment (c) low starting and low running friction except at very high speeds (d) all the mentioned

Last Answer : (d) all the mentioned

In the event of cabin depressurization, the actions of the pilot will be to: a. Immediately commence a diversion to a suitable alternate b. Increase engine power to provide additional airflow to the pressurization systems c. Maintain the aeroplane altitude to prevent further damage to the airframe by over loading of the structure d. Commence a descent to an altitude where the supplemental oxygen supply is sufficient for all crew and passengers

Description : In the event of cabin depressurization, the actions of the pilot will be to: a. Immediately commence a diversion to a suitable alternate b. Increase engine power to provide additional ... a descent to an altitude where the supplemental oxygen supply is sufficient for all crew and passengers

Last Answer : d. Commence a descent to an altitude where the supplemental oxygen supply is sufficient for all crew and passengers

What are steps involved in loading and running local applets?

Description : What are steps involved in loading and running local applets?

Last Answer : Need answer

“Booting the System” means (1) loading the operating system (2) dismissing the computer (3) running an application program called “Booting”. (4) physically kicking the computer

Description : “Booting the System” means (1) loading the operating system (2) dismissing the computer (3) running an application program called “Booting”. (4) physically kicking the computer

Last Answer : loading the operating system

What does it mean if you start rolling down a hill while in drive?

Description : What does it mean if you start rolling down a hill while in drive?

Last Answer : I am not sure, but could it be your gas pump not doing well. As it seems your gas are not flowing well in a timely fashion, but this is nothing more than my guess. I am not a mechanic :)

Loading capacity of chain drive system is based on a) Rate of wear b) Ultimate strength of chain material c) None of (a) and (b) d) Both (a) and (b)

Description : Loading capacity of chain drive system is based on a) Rate of wear b) Ultimate strength of chain material c) None of (a) and (b) d) Both (a) and (b)

Last Answer : a) Rate of wear

Does anyone else on here have or know about Acute Intermittent Porphyria?

Description : Does anyone else on here have or know about Acute Intermittent Porphyria?

Last Answer : answer:Pee in a covered glass, leave it outside on a sunny day – all day. If it turns purple, you’ve got it. Seriously. Not foolproof, but you know… you could always GO TO YOUR DOCTOR IF YOU SUSPECT A SERIOUS CONDITION. What makes you think you have it?

Is my splitter responsible for intermittent internet access?

Description : Is my splitter responsible for intermittent internet access?

Last Answer : Who is your ISP? Could be a line issue, a tap on the line that is causing intermittent service. I met a premise technician for an ISP/Cable provider that carries around with him a little bottle of ... much covered your bases so maybe try these things but I'm going to assume it's a line problem.

How do I stop this intermittent typing crazines?

Description : How do I stop this intermittent typing crazines?

Last Answer : You need a new keyboard.

Intermittent connection problems to Airport Express...

Description : Intermittent connection problems to Airport Express...

Last Answer : answer:I can’t answer your question, I am sorry. I found this page however, maybe it can help you. http://www.apple.com/support/airport/ and http://docs.info.apple.com/article.html?artnum=58543 Sorry I can’t be of more assistance. Bri_L

Tips For Intermittent Fasting?

Description : Tips For Intermittent Fasting?

Last Answer : expresses gratitude and worship. Performing prayers five times a day is compulsory but flexibility in the timing specifics is allowed depending on circumstances. The prayers are recited in the Arabic language, and ... The Masjid an-Nabawi ('Prophetic Mosque') in Medina, Saudi Arabia, was also a pla

Is intermittent fasting good?

Description : I've heard that intermittent fasting is good for losing weight. Is that really true?

Last Answer : Yes. Very upbeat lately and working very well! For starters, it is recommended to eat in the 16/8 window, ie 8 hours, and fast until 4 pm.

Intermittent car battery charging

Description : Does the battery matter if I charge it intermittently? I'm still not home

Last Answer : It shouldn't matter much, although it's probably not optimal. Let her charge for the night. Before you sleep, the battery is charged and you don't drive in the same car at night. / So I mean, if you sleep /

Have you ever tried intermittent fasting?

Description : Have you ever tried intermittent fasting?

Last Answer : Intermittent fasting or fasting regularly is one of the most popular trends in the world of fitness to keep your weight and get better health. The trend of intermittent fasting is a new discovery and many ... running after it to get maximum results. However, since I am not obese, I never tried it.

Is intermittent fasting good for those with hypothyroidism?

Description : Is intermittent fasting good for those with hypothyroidism?

Last Answer : You will need hormone treatment and not intermittent fasting. This is just another "trend" on the diet world. Doctors recommend people to have a little something to eat every 3 hours. If you do that kind ... they barely eat anything to begin with...no wonder they would get thin if they do not eat!

How does intermittent fasting improve insulin sensitivity?

Description : How does intermittent fasting improve insulin sensitivity?

Last Answer : During fasting, when we restrict the intake of food, our body tissues do not have any other choice but to burn the accumulated fat for energy. The fat deposits become the fuel ... powerful. Thus, intermittent fasting is one of the most efficient insulin stabilizers to control glucose fluctuations.

What is the cpt code for intermittent positive pressure breathing of a newborn?

Description : What is the cpt code for intermittent positive pressure breathing of a newborn?

Last Answer : 94664

What is an antonym for intermittent?

Description : What is an antonym for intermittent?

Last Answer : continuous

What can cause terminated wires to loosen resulting in broken or intermittent connections?

Description : What can cause terminated wires to loosen resulting in broken or intermittent connections?

Last Answer : Heating and coolingVibration

What can cause terminated wires to loosen resulting in broken or intermittent connections?

Description : What can cause terminated wires to loosen resulting in broken or intermittent connections?

Last Answer : Heating and coolingVibration

Has science proven any benefits for intermittent fasting?

Description : Has science proven any benefits for intermittent fasting?

Last Answer : Yes, but those benefits are limited.First, for the uninitiated: Intermittent fasting diets restrict a person’s caloric intake during certain hours or days. For instance, a person might follow a 16:8 ... to try an intermittent fasting plan, you should review it with a physician or dietitian first.

Clean intermittent self-catheterization?

Description : Clean intermittent self-catheterization?

Last Answer : DefinitionIntermittent catheterization is the temporary placement of a catheter (tube) to remove urine from the body. This is usually done by placing the catheter through the urethra ... catheterization is to:Completely empty the bladderPrevent further bladder or kidney damagePrevent urinary t

What is intermittent fasting?

Description : What is intermittent fasting?

Last Answer : Intermittent fasting is an eating pattern where you cycle between periods of eating and fasting. Its not about what you eat but when you eat. It is a very popular health and fitness trend. Before applying ... let’s see what the Dr. Steven Quay has to share. For that you can checkout his website.