what should be the minimum wattage ratings of R 3 and R 5 ?

what should be the minimum wattage ratings  of R 3 and R 5 ?
by

1 Answer

Answer :

R3 = 2 watts; R5 = 6 watts.
by

Related questions

Why are small-wattage soldering irons not used to solder large conductors?

Description : Why are small-wattage soldering irons not used to solder large conductors?

Last Answer : Although its temperature is as high as the larger irons, it does not have thermal inertia.

What does the wattage rating of a resistor indicate?

Description : What does the wattage rating of a resistor indicate?

Last Answer : Its ability to dissipate heat

In the illustration what is the minimum wattage needed for a 3 ohm resistor with a 12 VDC power source in circuit 'A'? EL-0041 A. 12 watts B. 48 watts C. 64 watts D. 232 watts

Description : In the illustration what is the minimum wattage needed for a 3 ohm resistor with a 12 VDC power source in circuit 'A'? EL-0041 A. 12 watts B. 48 watts C. 64 watts D. 232 watts

Last Answer : Answer: B

Luminance efficiency is minimum for a a. Fluorescent tube b. High wattage light bulb c. Mercury vapor lamp d. Low wattage light bulb

Description : Luminance efficiency is minimum for a a. Fluorescent tube b. High wattage light bulb c. Mercury vapor lamp d. Low wattage light bulb

Last Answer : d. Low wattage light bulb

Luminance efficiency is minimum for a ∙ a. Fluorescent tube ∙ b. High wattage light bulb ∙ c. Mercury vapor lamp ∙ d. Low wattage light bulb

Description : Luminance efficiency is minimum for a ∙ a. Fluorescent tube ∙ b. High wattage light bulb ∙ c. Mercury vapor lamp ∙ d. Low wattage light bulb

Last Answer : d. Low wattage light bulb

What is meant by diode ratings?

Description : What is meant by diode ratings?

Last Answer : They are the limiting values of operating conditions outside which operations could cause diode damage.

What are the three time delay ratings for circuit breakers?

Description : What are the three time delay ratings for circuit breakers?

Last Answer : Instantaneous, short time delay, and long time delay.

What are the voltage and current ratings for a fuse designated

Description : What are the voltage and current ratings for a fuse designated

Last Answer : a. 125 volts or less, 1/16 ampere b. 250 volts or less, .15 ampere

What are the voltage, current, and time delay ratings for a fuse with the designation

Description : What are the voltage, current, and time delay ratings for a fuse with the designation

Last Answer : a. 125 volts or less, 1.5 amperes, delay b. 250 volts or less, 1/8 ampere standard

Why are high wattage class 4 lasers so much more expensive than lower wattage lasers?

Description : Why are high wattage class 4 lasers so much more expensive than lower wattage lasers?

Last Answer : I’m guessing it’s got to do with the research and development it takes to build the more expensive laser. They need to make their money back. Also they may make less of them so they’re more expensive to build. And lastly, they charge what the market will bear.

How high is the wattage of a MacBook 13?

Description : How high is the wattage of a MacBook 13?

Last Answer : answer:If the 15 Watts is a reasonable average number, then your cost calculations are basically correct if you are using it outdoors and are ignoring your indoor environment. If you are using the ... average values. I heat with wood which is free so it is worth turning off electrical appliances.

Can anyone explain the wattage on a halogen tube?

Description : Can anyone explain the wattage on a halogen tube?

Last Answer : the wattage will change with the voltage delivered to the lamp, most are on a dimmer circuit for this reason Edit: use only the bulb that the lamp was built for, they run extremely hot and have started many house fires – never EVER install a different bulb than original

I have a 60 watt/120v clip-on lamp. What is the highest wattage of compact fluorescent bulb can I safely use in this lamp?

Description : I have a 60 watt/120v clip-on lamp. What is the highest wattage of compact fluorescent bulb can I safely use in this lamp?

Last Answer : By the way, I mean actual watts on the fluorescent bulb, not replacement-watts. :)

Is there a quick and painless way to find the wattage on a very very hot bulb that I can't turn off?

Description : Is there a quick and painless way to find the wattage on a very very hot bulb that I can't turn off?

Last Answer : answer:So, my solution to your perplexing predicament is this. The problem we have is that you don't know what temperature littlefoot likes most, but you need to be able to remove the halogen bulb ... cage next to the bonfire longways. Then littlefoot can decide how close it too close to stay warm.

What is the range of wattage for power supply?

Description : What is the range of wattage for power supply?

Last Answer : Power supply watts can range anywhere from 1 watt to 2000+watts. The difference in when it is used is in what device is beingpowered. Something small, like a cell phone charger uses ... otherhand, require a lot more wattage....Such as crazy gaming machines usually require 1000-1500watts.

How much wattage do electric frying pans use?

Description : How much wattage do electric frying pans use?

Last Answer : Electric frying pans vary in their power consumption according to their size. Most are between 500 and 1200 watts. By way of comparison, this is between 5 and 12 100-watt traditional incandescent light bulbs.

What is the highest wattage for a standard oven microwave?

Description : What is the highest wattage for a standard oven microwave?

Last Answer : On most standard microwaves the wattage ranges from between 500 and 1,000 watts. Now there are some larger industrial strength ones that range from 1,000 watts to 2,000 watts. These larger microwave ovens have more than 1 magnetron in them to provide the extra power.

What wattage range is good for compact microwave ovens?

Description : What wattage range is good for compact microwave ovens?

Last Answer : A good wattage for a compact microwave oven would be 800 watts. This depends on the size, but most compact will fit just about anywhere and provide the power you need.

What blow dryer has the most wattage?

Description : What blow dryer has the most wattage?

Last Answer : The ionic brand Lava Flo professional hair dryer uses 1875 watts.

What's the least amount of wattage I need if I only reheat leftovers and make microwave popcorn?

Description : What's the least amount of wattage I need if I only reheat leftovers and make microwave popcorn?

Last Answer : The minimum wattage needed to only reheat leftovers and microwave popcorn would 400 Watts. If a bag of popcorn is put into a 400 Watt microwave, it should take approximately five minutes to be finished popping ... more time than the usual 500-800 Watt microwave, but it will still get the job done.

Can I use a higher wattage bulb in a lamp that states 40 watts?

Description : Can I use a higher wattage bulb in a lamp that states 40 watts?

Last Answer : You should not use a higher wattage bulb in a lamp that says 40 watts. The higher wattage could cause the lamp to catch fire due to the excess heat and could cause you serious electrical problems.

Does wattage matter when buying a microwave oven?

Description : Does wattage matter when buying a microwave oven?

Last Answer : In layman’s term wattage is strength. One has to consider wattage while purchasing oven. Higher wattage will consume more electricity but can cook faster and can accommodate bigger quantity of food to be cooked.

What is the cooking wattage?

Description : What is the cooking wattage?

Last Answer : This simple to use Microwave oven has 1100 watts of cooking power!

What is the wattage output of the Frigidaire FMV157GS microwave?

Description : What is the wattage output of the Frigidaire FMV157GS microwave?

Last Answer : The wattage output of the Frigidaire FMV157GS 0.5 CuFt Over-The-Range Microwave Oven is 1,000 watts.

What is the wattage of this microwave oven?

Description : What is the wattage of this microwave oven?

Last Answer : The wattage of the GE Profile Spacemaker PNM1871SMSS 1.8 CuFt Over-The-Range Microwave Oven is 1100 watts.

What is the suggested wattage for a home light in a home office?

Description : What is the suggested wattage for a home light in a home office?

Last Answer : The suggested wattage for a home light in an office at home is around 100 or so, such as a regular bright desk lamp. http://www.lampsplus.com/

wattage of air compressors?

Description : wattage of air compressors?

Last Answer : The average air compressor uses only about 120v. Which is the average house socket. Thus using about 400 Watts of power.

What is the wattage of a heating element drawing a current of 30 amperes, at 120 volts? A. 30 watts B. 99.97 watts C. 360 watts D. 3600 watts

Description : What is the wattage of a heating element drawing a current of 30 amperes, at 120 volts? A. 30 watts B. 99.97 watts C. 360 watts D. 3600 watts

Last Answer : Answer: D

When replacing component 'B' of the circuit shown in the illustration, it is important to know that ____________. EL-0081 A. it is polarity sensitive and must be inserted as indicated on its base B. there is a danger of phosphor poisoning should 'B''s bulb break C. component 'D' must be closed during the replacement to provide the capacitor's initial charge D. it must match the circuit voltage and component 'C' wattage

Description : When replacing component 'B' of the circuit shown in the illustration, it is important to know that ____________. EL-0081 A. it is polarity sensitive and must be inserted as indicated on its ... provide the capacitor's initial charge D. it must match the circuit voltage and component 'C' wattage

Last Answer : Answer: D

When a console indicating lamp burns out, attempts to renew it should not be made while maneuvering because _______________. A. the new lamp may be of a higher wattage and cause heat damage to the lens B. removing a faulty lamp usually causes an alarm to sound on the bridge C. attention should be paid only to engine orders D. a socket/wiring fault may cause a ground or short circuit to shut down a vital function

Description : When a console indicating lamp burns out, attempts to renew it should not be made while maneuvering because _______________. A. the new lamp may be of a higher wattage and cause heat damage to the lens ... D. a socket/wiring fault may cause a ground or short circuit to shut down a vital function

Last Answer : Answer: D

When soldering a printed circuit board component, you should be careful to prevent damage by _________. A. quickly heating the joints, using a high wattage iron B. using the soldering iron tip sparingly C. using only acid cord solder D. applying mechanical pressure to the joints being soldered

Description : When soldering a printed circuit board component, you should be careful to prevent damage by _________. A. quickly heating the joints, using a high wattage iron B. using the soldering iron tip sparingly C. using only acid cord solder D. applying mechanical pressure to the joints being soldered

Last Answer : Answer: B

Why is it a poor practice to use a high wattage soldering iron when soldering or desoldering components on a printed circuit board? A. The circuit board will blister and warp. B. The foil wire bonded to the board may come loosened from the board. C. The circuit board has a low melting temperature. D. The solder is kept to a dull heat dissipating finish.

Description : Why is it a poor practice to use a high wattage soldering iron when soldering or desoldering components on a printed circuit board? A. The circuit board will blister and warp. B. The foil wire bonded ... board has a low melting temperature. D. The solder is kept to a dull heat dissipating finish.

Last Answer : Answer: B

When changing out component 'B' of the circuit shown in the illustration, it is important to know that ____________. EL-0081 A. it is polarity sensitive and must be inserted as indicated on its base B. there is a danger of phosphor poisoning should 'B''s bulb break C. component 'D' must be closed during the replacement to provide the capacitor's initial charge D. it must match the circuit voltage and component 'C' wattage

Description : When changing out component 'B' of the circuit shown in the illustration, it is important to know that ____________. EL-0081 A. it is polarity sensitive and must be inserted as indicated on its ... provide the capacitor's initial charge D. it must match the circuit voltage and component 'C' wattage

Last Answer : Answer: D

During the start-up of the circuit shown in the illustration, it is noted that the ends of component 'C' remain lighted but the tube does not illuminate. The cause of this problem is ____________. EL-0081 A. component 'A' is open B. component 'D' is closed C. component 'C' is the wrong wattage D. component 'B' contacts are stuck closed

Description : During the start-up of the circuit shown in the illustration, it is noted that the ends of component 'C' remain lighted but the tube does not illuminate. The cause of this problem is ____________. EL- ... ' is closed C. component 'C' is the wrong wattage D. component 'B' contacts are stuck closed

Last Answer : Answer: D

Incandescent lamps are classified according to __________. A. shape of bulb and type of service B. size and style of base C. operating voltage and wattage D. all of the above

Description : Incandescent lamps are classified according to __________. A. shape of bulb and type of service B. size and style of base C. operating voltage and wattage D. all of the above

Last Answer : Answer: D

Luminous efficiency is least for a A. mercury vapor lamp B. low-wattage light bulb C. high-wattage light bulb D. fluorescent tube

Description : Luminous efficiency is least for a A. mercury vapor lamp B. low-wattage light bulb C. high-wattage light bulb D. fluorescent tube

Last Answer : B. low-wattage light bulb

Synchronous wattage of induction motor means:

Description : Synchronous wattage of induction motor means: A) rotor input in watts B) stator input in watts C) combined stator and rotor input in watts D) shaft output in watts

Last Answer : Synchronous wattage of induction motor means: rotor input in watts 

Two 1 kilo ohm, 1/2 W resistors are connected in series. Their combined resistance value and wattage will be

Last Answer : Two 1 kilo-ohm 1/2 W resistors are connected in series. Their combined resistance value and wattage will be 2 kΩ, 1 W.

For testing appliances, the wattage of test lamp should be?

Description : For testing appliances, the wattage of test lamp should be?

Last Answer : For testing appliances, the wattage of test lamp should be high.

The wattage of motor for driving domestic sewing machine will be around?

Last Answer : The wattage of motor for driving domestic sewing machine will be around 100 to 150 W.

The wattage rating for a ceiling fan motor will be in the range?

Last Answer : The wattage rating for a ceiling fan motor will be in the range 50 to 150 W .

The BOA shall submit to the PRC the ratings obtained by each candidate within how many calendar days after the examination? a. 5 days b. 10 days c. 15 days d. 30 days

Description : The BOA shall submit to the PRC the ratings obtained by each candidate within how many calendar days after the examination? a. 5 days b. 10 days c. 15 days d. 30 days

Last Answer : 10 days

For which of the following ratings of the transformer differential protection is recommended ? (a) above 30 kVA. (b) equal to and above 5 MVA (c) equal to and above 25 MVA (d) none of the above

Description : For which of the following ratings of the transformer differential protection is recommended ? (a) above 30 kVA. (b) equal to and above 5 MVA (c) equal to and above 25 MVA (d) none of the above

Last Answer : (b) equal to and above 5 MVA

Ratings for welding neck flanges under ASME B16.5 are based upon which of the following? a) The flange thickness and 40,000 psi yield strength. b) The hub thickness at the welding end and 40,000 psi yield strength. c) The weld metal yield strength. d) The piping wall thickness and yield strength.

Description : Ratings for welding neck flanges under ASME B16.5 are based upon which of the following? a) The flange thickness and 40,000 psi yield strength. b) The hub thickness at the welding end and ... psi yield strength. c) The weld metal yield strength. d) The piping wall thickness and yield strength.

Last Answer : b) The hub thickness at the welding end and 40,000 psi yield strength

What must be considered when using flanges at the ratings listed in ASME B16.5 at low temperatures? a) Toughness. b) Shock loadings. c) Sudden changes of stress or temperature. d) All of the above.

Description : What must be considered when using flanges at the ratings listed in ASME B16.5 at low temperatures? a) Toughness. b) Shock loadings. c) Sudden changes of stress or temperature. d) All of the above.

Last Answer : c) Sudden changes of stress or temperature.

When applying to pressure ratings listed in ASME B16.5 at high or low temperatures which of the following must be considered? a) Risk of leakage due to forces and moments developed. b) Bursting of the flanged fitting. c) The bolting forces at the flange. d) All of the above.

Description : When applying to pressure ratings listed in ASME B16.5 at high or low temperatures which of the following must be considered? a) Risk of leakage due to forces and moments developed. b) Bursting of the flanged fitting. c) The bolting forces at the flange. d) All of the above.

Last Answer : a) Risk of leakage due to forces and moments developed.

What does ASME B16.5 cover? a) Pressure and temperature ratings. b) Materials, dimensions, tolerances, and marking. c) Testing and methods of designating openings. d) All of the above.

Description : WWhat does ASME B16.5 cover? a) Pressure and temperature ratings. b) Materials, dimensions, tolerances, and marking. c) Testing and methods of designating openings. d) All of the above.

Last Answer : d) All of the above.