Earth Leakage circuit breaker (ELCB) works on the basis of

Earth Leakage circuit breaker (ELCB) works on the basis of
by

1 Answer

Answer :

Earth Leakage circuit breaker (ELCB) works on the basis of Residual current

by

Related questions

State function of starter and ELCB. (Earth Leakage Circuit Breaker)

Description : State function of starter and ELCB. (Earth Leakage Circuit Breaker)

Last Answer : i) Function of Starter:- 1. To prevent the high starting current OR to minimize the starting current. 2. To give supply failure protection 3. To give over load and short circuit protection ... an installation and cut off the circuit from power supply and avoid electrical shock to the person.

What is Earth Leakage Circuit Breaker ?

Description : What is Earth Leakage Circuit Breaker ?

Last Answer : Earth leakage circuit breaker is a protective device which protects the leaky faulty or faulty circuit from dangerous parts by separating it from the good parts. The leakage current of the circuit flows ... a faulty place due to a leakage error in the circuit is called a leakage circuit breaker.

Explain working of ELCB with neat sketch diagram.

Description : Explain working of ELCB with neat sketch diagram.

Last Answer : Earth Leakage Circuit Breaker(ELCB): Earth leakage circuit breaker is a safety device used in electrical installations with high earth impedance to prevent shocks and disconnect power under earth fault ... tripping in domestic installations with tripping time being as low as 25 msec.

Describe the construction of SF6 circuit breaker with neat diagram.

Description : Describe the construction of SF6 circuit breaker with neat diagram.

Last Answer : Construction of SF6 Circuit Breaker : A sulphur hexafluoride (SF6) circuit breaker consists of fixed and moving contacts enclosed in a chamber. The chamber is called arc interruption ... contact, moving contact and arcing horn are coated with a copper-tungsten arc-resistant material. 

Define the following terms related to circuit breaker. 1) Breaking Capacity 2) Making Capacity 3) Short time rating and 4) Normal current rating

Description : Define the following terms related to circuit breaker. 1) Breaking Capacity 2) Making Capacity 3) Short time rating and 4) Normal current rating

Last Answer : 1) Breaking Capacity: It is current (r.m.s) that a circuit breaker is capable of breaking at given recovery voltage under specified conditions (e.g. power factor, rate of rise of ... under specified conditions. The only limitation in this case is the temperature rise of current-carrying parts.

Explain construction and working of SF6 circuit breaker.

Description : Explain construction and working of SF6 circuit breaker.

Last Answer : Construction: A sulphur hexafluoride (SF6) circuit breaker consists of fixed and moving contacts enclosed in a chamber. The chamber is called arc interruption chamber, which contains the ... arc being extinguished. Finally the gas enters the contact space increasing the dielectric strength.

With which of the following, a circuit breaker must be equipped for remote operation ?

Description : With which of the following, a circuit breaker must be equipped for remote operation ?(a) Inverse time trip(b) Time-delay trip(c) Shunt trip (d) None of the above(e) All of the above

Last Answer : With which of the following, a circuit breaker must be equipped for remote operation ?(a) Inverse time trip(b) Time-delay trip(c) Shunt trip (d) None of the above(e) All of the above

Which of the following medium is employed for extinction of arc in air circuit breaker ?

Description : Which of the following medium is employed for extinction of arc in air circuit breaker ?(a) Water (b) Oil(c) Air (d) SF6

Last Answer : Which of the following medium is employed for extinction of arc in air circuit breaker ?(a) Water (b) Oil(c) Air (d) SF6

Making capacity of the circuit breaker depends on

Description : Making capacity of the circuit breaker depends on (A) operating voltage (B) short circuit MVA (C) fault current (D) All of the above

Last Answer : Making capacity of the circuit breaker depends on (A) operating voltage (B) short circuit MVA (C) fault current (D) All of the above

The arc temperature in Oil Circuit Breaker may reach up to_______.

Description : The arc temperature in Oil Circuit Breaker may reach up to_______.  (A) 5,000° K (B) 8,000° K (C) 10,000° K (D) None of the above

Last Answer : The arc temperature in Oil Circuit Breaker may reach up to 5,000° K 

The number of cycles in which a high speed circuit breaker can complete its operation is

Description : The number of cycles in which a high speed circuit breaker can complete its operation is  (A) 3 to 8 (B) 10 to 18 (C) 20 to 30 (D) 40 to 50

Last Answer : The number of cycles in which a high speed circuit breaker can complete its operation is 3 to 8

A circuit breaker is designed to protect an electrical circuit from damage caused by :

Description : A circuit breaker is designed to protect an electrical circuit from damage caused by :  (A) Over load (B) Short circuit (C) Over current (D) All of the above

Last Answer : A circuit breaker is designed to protect an electrical circuit from damage caused by :  (A) Over load (B) Short circuit (C) Over current (D) All of the above

The Minimum Oil Circuit Breaker (MOCB) is named because of :

Description : The Minimum Oil Circuit Breaker (MOCB) is named because of :  (A) Reduced requirement of oil (B) Reduced requirement of air (C) All of the above (D) None of the above

Last Answer : The Minimum Oil Circuit Breaker (MOCB) is named because of : Reduced requirement of oil 

For selecting a circuit breaker, ______ should be determined.

Description : For selecting a circuit breaker, ______ should be determined.  (A) initial current that flows on occurrence of a short circuit only (B) transient current that flows at the time of circuit interruption only (C) resonant frequency only (D) (A) and (B) 

Last Answer : For selecting a circuit breaker, ______ should be determined. (A) initial current that flows on occurrence of a short circuit only (B) transient current that flows at the time of circuit interruption only (C) resonant frequency only (D) (A) and (B) 

ln a minimum oil circuit breaker the oil is used

Description : ln a minimum oil circuit breaker the oil is used

Last Answer : ln a minimum oil circuit breaker the oil is used to act as circuit breaking medium only

Arc in a circuit breaker is interrupted at?

Last Answer : Arc in a circuit breaker is interrupted at zero current.

The arc voltage produced in A.C. circuit breaker is always?

Last Answer : The arc voltage produced in A.C. circuit breaker is always in phase with the arc current.

In a circuit breaker the basic problem is to?

Last Answer : In a circuit breaker the basic problem is to transmit large power.

Ionization in circuit breaker is facilitated by?

Last Answer : Ionization in circuit breaker is facilitated by high temperature, increase of mean free path, increasing field strength.

The voltage appearing across the contacts after opening of the circuit breaker is called______voltage.

Last Answer : The voltage appearing across the contacts after opening of the circuit breaker is called recovery voltage.

Air blast circuit breaker is used for?

Last Answer : Air blast circuit breaker is used for repeated duty.

Magnetic circuit breaker has ______ trip action.

Last Answer : Magnetic circuit breaker has instantaneous trip action.

Thermal circuit breaker has?

Last Answer : Thermal circuit breaker has delayed trip action.

The arcing contacts in a circuit breaker are made of?

Last Answer : The arcing contacts in a circuit breaker are made of copper tungsten alloy.

what is SF6 circuit breaker?

Description : what is SF6 circuit breaker?

Last Answer : SF6 is Sulpher hexa Fluoride gas. If this gas is used as arc quenching medium in a Circuit breaker means SF6 CB.

Why ELCB cannot work if Neutral input of ELCB does not connect to ground?

Description : Why ELCB cannot work if Neutral input of ELCB does not connect to ground?

Last Answer : ▪ ELCB is used to detect earth leakage fault. Once the phase and neutral are connected in an ELCB, the current will flow through phase and that same current will have to return neutral so ... that full fault current will come back through ELCB, and there will be no difference in current.

Working of ELCB

Description : Working of ELCB

Last Answer : Practical Significance ELCB or RCCB, is a life-saving device which is designed to prevent human life from electric shocks. This device provides the safety in an electrical installation, therefore, it ... should be taken while operating knife switch. Procedure i. Record the observations.

Explain the use of the following components in electrical wiring system and give specification of each: (i) MCB (ii) ELCB

Description : Explain the use of the following components in electrical wiring system and give specification of each: (i) MCB (ii) ELCB

Last Answer : i) MCB (Miniature Circuit Breaker)  * MCB provides short circuit protection. * MCB provides overload protection * ELCB provides earth fault protection. * MCB is in series with load and ELCB is ... The low sensitivity ELCB are used for electrical machine the rating is in between the 3A to 10 A

Explain the function of ELCB and ICDP switch. List two specifications of each.

Description : Explain the function of ELCB and ICDP switch. List two specifications of each.  

Last Answer : i) Function of ELCB- (Earth Leakage Circuit Breaker)  An Earth Leakage Circuit Breaker (ELCB) is a device used to directly detect currents leaking to earth from an installation and cut the power and avoid the ... in the market: 1. The ICDP are available in single phase, 16A, 32A, 240 volts

Explain MCB and ELCB with connection diagram supplying single phase load.

Description : Explain MCB and ELCB with connection diagram supplying single phase load. 

Last Answer : OR OR Explanation: * MCB provides short circuit protection. * MCB provides overload protection * ELCB provides earth fault protection. * MCB is in series with ... occurs, the ELCB cuts off the power within the time of 0.1 sec. automatically to protect the personnel. 

State function of ELCB.

Description : State function of ELCB.

Last Answer : Functions of ELCB: 1. Provides protection to apparatus by detecting the unsafe magnitudes of leakage currents diverting to earth. 2. Disconnect the supply to the circuit if line to ground ... 3. Provides protection to users by detecting the unsafe magnitudes of leakage currents diverting to earth.

What difference between ELCB and CB ?

Description : What difference between ELCB and CB ?

Last Answer : Any difference in both indicates the residual current which leaking to earth. ... An MCB(Miniature Circuit Breaker) is used to detect electrical devices and protect them from short circuit where as ELCB (Earth Leakage Circuit Breaker) is used to detect leakages with the intention to avoid shock

State the function of : i) MCCB ii) ELCB iii) MCB iv) Switch.

Description : State the function of : i) MCCB ii) ELCB iii) MCB iv) Switch. 

Last Answer : i) MCB: Provide short circuit protection & over load protection to electrical loads.  ii) ELCB: Provides protection by detecting the unsafe magnitudes leakage currents flowing to earth and disconnecting ... rating.  iv) Switch: Make and break the electrical connection to the load manually.

How do relay works ?

Description : How do relay works ?

Last Answer : Relay working like contact it is noise less 

When a megohmmeter is used to test the dielectric strength of wire insulation, the initial dip of the pointer toward 'zero' is caused by _____________. A. good insulation B. the leakage of current along the surface of dirty insulation C. the capacitance of the circuit D. the dielectric absorption effect of the insulation

Description : When a megohmmeter is used to test the dielectric strength of wire insulation, the initial dip of the pointer toward 'zero' is caused by _____________. A. good insulation B. the leakage of ... of dirty insulation C. the capacitance of the circuit D. the dielectric absorption effect of the insulation

Last Answer : Answer: C

The use of four diodes, in a full-wave bridge rectifier circuit, will __________. A. provide unidirectional current to the load B. allow a very high leakage current from the load C. convert direct current to alternating current D. offer high opposition to current in two directions

Description : The use of four diodes, in a full-wave bridge rectifier circuit, will __________. A. provide unidirectional current to the load B. allow a very high leakage current from the load C. convert direct current to alternating current D. offer high opposition to current in two directions

Last Answer : Answer: A

Draw neat circuit diagram of i) Feeder reactor and ii) Generator reactor

Description : Draw neat circuit diagram of i) Feeder reactor and ii) Generator reactor

Last Answer : 1) Circuit Diagram of Feeder Reactor : 2) Circuit Diagram of Generator Reactor :

If the % reactance upto the fault point is 20%, then the short circuit current will be

Description : If the % reactance upto the fault point is 20%, then the short circuit current will be

Last Answer : If the % reactance upto the fault point is 20%, then the short circuit current will be 5 times the full load current

Which of the following circuit breakers has high reliability & minimum maintenance?

Description : Which of the following circuit breakers has high reliability & minimum maintenance?  (A) Bulk oil type CB (B) Air blast CB (C) Vacuum CB (D) Sulphur hexafluoride CB 

Last Answer : Which of the following circuit breakers has high reliability & minimum maintenance?  (A) Bulk oil type CB (B) Air blast CB (C) Vacuum CB (D) Sulphur hexafluoride CB 

The following is/are the characteristics of SF6 circuit breakers:

Description : The following is/are the characteristics of SF6 circuit breakers:  (A) It does not need an auxiliary breaking chamber (B) Short break time of 2 to 2.5 cycles (C) All of the above (D) None of the above

Last Answer : The following is/are the characteristics of SF6 circuit breakers:  (A) It does not need an auxiliary breaking chamber (B) Short break time of 2 to 2.5 cycles (C) All of the above (D) None of the above

In the induction type directional over current relay, when a short-circuit occurs in the circuit

Description : In the induction type directional over current relay, when a short-circuit occurs in the circuit (A) power flows in reverse direction (B) power flows in normal direction (C) directional power element does not operate (D) over current element is not energized

Last Answer : In the induction type directional over current relay, when a short-circuit occurs in the circuit power flows in reverse direction

A fuse in a motor circuit provides protection against?

Last Answer : A fuse in a motor circuit provides protection against short-circuit and overload.

Air blast circuit breakers for 400 kV power system are designed to operate in?

Last Answer : Air blast circuit breakers for 400 kV power system are designed to operate in 50 millisecond.

The short circuit in any winding of the transformer is the result of?

Last Answer : The short circuit in any winding of the transformer is the result of impulse voltage.

Insulation resistance of high voltage circuit breakers is more than?

Last Answer : Insulation resistance of high voltage circuit breakers is more than 100 mega ohms.

The time of closing the cycle, in modern circuit breakers is?

Last Answer : The time of closing the cycle, in modern circuit breakers is 0.003 sec.

The current zero interruption, in oil and air blast circuit breakers, is achieved by?

Description : The current zero interruption, in oil and air blast circuit breakers, is achieved by?

Last Answer : The current zero interruption, in oil and air blast circuit breakers, is achieved by lengthening of the gap, cooling and blast effect.

Circuit breakers are essentially?

Last Answer : Circuit breakers are essentially current carrying contacts called electrodes.

Circuit breakers usually operate under?

Last Answer : Circuit breakers usually operate under transient state of short-circuit current.

Arc in a circuit behaves as?

Description : Arc in a circuit behaves as?

Last Answer : Arc in a circuit behaves as a resistance decreasing with voltage rise across the arc.