Description : What is the effect of addition of zinc in copper? What is the use of 70/30 brass ?
Last Answer : By addition of zinc in copper, both tensile strength and elongation increases. The 70/30 brass has excellent deep drawing property and is used for making radiator fins.
Description : The pump is mostly made of: e) Aluminium c) Brass f) Copper d) Plastic
Last Answer : Aluminium
Description : The pump is mostly made of: A. Aluminium B. Copper C. Brass D. Plastic
Description : Identical objects of four different materials are heated to the same high temperature. Which of the following would least likely burn your hand if touched? a. aluminium b. brass c. glass d. concrete
Last Answer : glass
Description : For ammonia refrigerating systems, the tubes of a shell and tube condenser are made of (a) copper (b) aluminium (c) steel (d) brass
Last Answer : Ans: c
Description : Of the following commonly used materials, the one that is not an alloy is - (1) Steel (2) Brass (3) Bronze (4) Copper
Last Answer : (4) Copper Explanation: Copper is not an alloy; it is a soft, malleable, and ductile metal with very high thermal and electrical conductivity. It is used as a constituent of various ... marine hardware and coins, and constant an used in strain gauges and thermocouples for temperature measurement.
Description : Tubes of multiple effect evaporator used for concentration of sugar cane juice are made of (A) Nickel (B) Copper (C) Stainless steel (D) Brass
Last Answer : (B) Copper
Description : Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin
Last Answer : (D) Brass, cast iron, mild steel and tin
Description : Dip stick used for measuring the level of petro fuels (e.g. petrol, diesel, fuel oil etc.) in the storage tank is usually made of (A) Brass (B) Copper (C) High carbon steel (D) Aluminium
Last Answer : (A) Brass
Description : Anodic material used for the cathodic protection of underground buried steel pipeline is (A) Nickel or copper (B) Zinc or magnesium (C) Bronze (D) Brass
Last Answer : (B) Zinc or magnesium
Description : Temperature of hot gases flowing in a pipe is measured by a thermocouple inserted in the thermal well. The thermal well made of __________ will facilitate the most accurate measurement of the temperature. (A) Copper (B) Steel (C) Aluminium (D) Brass
Last Answer : Option A
Description : Which of the following materials has the least scrap value? (A) Aluminium (B) Stainless steel (C) Brass (D) Copper
Last Answer : Option B
Description : The material generally used for armour of high voltage cables is (a) aluminium (b) steel (c) brass (d) copper
Last Answer : (b) steel
Description : The Statue of Liberty is green because of: w) green stone x) oxidized brass y) steel painted green z) oxidized copper
Last Answer : ANSWER: Z -- OXIDIZED COPPER
Description : Of the following commonly used materials, the one that is not an alloy is (1) Steel (2) Brass (3) Bronze (4) Copper
Last Answer : Copper
Description : Which one among the following is not a mixture? (1) Graphite (2) Glass (3) Brass (4) Steel
Last Answer : (1) Graphite Explanation: Graphite is a naturally-occurring form of crystalline carbon. It is a native element mineral found in metamorphic and igneous rocks. Graphite is a mineral of extremes.
Description : Evaporator used for concentrating tomato juice is made of (A) Nickel (B) Brass (C) Stainless steel-glass lined (D) Cast iron-rubber lined
Last Answer : (C) Stainless steel-glass lined
Description : A highly elastic material is deformed least on loading and retains its original form on removal of the load. Which of the following is the most elastic material? (A) Steel (B) Glass (C) Rubber (D) Brass
Description : Out of the following, maximum temperature drop for a given heat flow & for the same thickness will be in the case of (A) Steel (B) Glass wood (C) Copper (D) Fireclay bricks
Last Answer : B) Glass wood
Description : At yield point' of a copper wire A. the load hasn't exceeded the elastic limit yet; so, Hooke's law applies B. the load has already exceeded the elastic limit and the material has become ... stage has passed and the wire has snapped already D. Like Brass and Bronze, Copper has no yield poin
Last Answer : the load has already exceeded the elastic limit and the material has become plastic
Description : 108.is primarily a management technique that uses energy information as a basis to eliminate waste, reduce and control current level of energy use and improve the existing operating procedures. a) Energy monitoring and targeting b) CUSUM c) Specific energy consumption d) Production
Last Answer : Energy monitoring and targeting
Description : Heat recovery provides valuable energy sources and ....... consumption. a) Reduce energy b) Increase energy c) Increase fuel d) Reduce fuel
Last Answer : Reduce energy
Description : In industrial operations fluids with temperature less than __________ are set as the limit for waste heat recovery because of the risk of condensation of corrosive liquids a. 80C b. 100C c. 120C d. 200C
Last Answer : 100C
Description : Calculate the recoverable waste heat (Q, in kCal/hour) from flue gases using the followingparameters: V (flow rate of the substance) 2000 m3/hr r (density of the flue gas): 0.9 kg/m3 Cp (specific heat ... (temperature difference): 120 oC h (recovery factor): 50% a. 21600 b. 43200 c. 25600 d. 34000
Last Answer : 21600
Description : Types of waste heat exchanger are: a) Regenerative and recuperative burners b) Economizers c) Waste heat boilers d) All of the above
Last Answer : All of the above
Description : A high temperature waste heat recovery unit consists of recovering waste heat at temperaturesgreater than _______. a) 200 °C b) 500 °C c) 300 °C d) 400 °C
Last Answer : 400 °C
Description : What are the benefits or the advantages of waste heat recovery units (WHRU)? a) Reduced Pollution b) Reduced equipment sizes c) Reduced auxiliary energy consumption. d) All of the above
Description : Traditionally, waste heat of low temperature range ________ has not been used for electricitygeneration despite efforts by ORC companies, mainly because the Carnot efficiency is rather low. a) 0-250 °C b) 0-150 °C c) 0-200 °C d) 0-120 °C
Last Answer : 0-120 °C
Description : Using an organic fluid that boils at a low temperature means that energy could be regeneratedfrom waste fluids is known as ________. a) Heat exchanger b) Heat remover c) Heat pumps d) Heat absorber
Last Answer : Heat pumps
Description : The waste heat recovery unit (WHRU) is a tool involved in _______. a) Regeneration b) Cogeneration c) Both ‘a’ and ‘b’ d) None of the above
Last Answer : Cogeneration
Description : A waste heat recovery unit (WHRU) is an_________ that transfers heat from process outputs at high temperature to another part of the process for some purpose, usually increased efficiency. a) Energy recovery heat exchanger b) Energy recovery heat diffuser c) Both ‘a’ and ‘b’ d) None of the above
Last Answer : Energy recovery heat exchanger
Description : A waste heat recovery unit is an energy recovery heat exchanger that transfers heat from process outputs at ........ a) High temperature b) Medium temperature c) Low temperature d) Both a & b
Last Answer : High temperature
Description : The waste heat energy could be used to produce ....... a) Cool air b) Hot air c) Exhaust gas d) All of the above
Last Answer : Cool air
Description : One of the key areas for ....... energy saving in existing systems is waste heat recovery. a) Potential b) Kinetic c) Thermal d) Electrical
Last Answer : Potential
Description : Techniques of waste heat recovery ....... a) Direct contact condensation b) Indirect contact condensation c) Transport membrane condensation d) All of the above
Description : A waste heat recovery system in industrial process has been key to reduce ....... Consumption. a) Coal b) Fuel c) Biogas d) Oil
Last Answer : Fuel
Description : Nellore to medium temperature waste heat recovery system the most suitable device is ------ a) Economizer b) Heat wheels c) Air preheater d) Recuperate d) Carbonate
Last Answer : Heat wheels
Description : A major advantage of waste heat recovery in industry is a) Reduction in pollution c) Increase efficiency d) None of the above
Last Answer : Reduction in pollution
Description : Recovery of waste heat from hot fluid to fluid is called: a) thermo compressor b) waste heat recovery boiler c) heat Pump d) economizer
Last Answer : heat Pump
Description : Recovery of heat from dryer exhaust air is a typical application of: a) Waste heat recovery boiler b) Heat pump c) Heat wheel d) Economizer
Last Answer : Heat wheel
Description : In a low to medium temperature waste heat recovery system which of the device is most suitable a) Economiser b) Heat wheels c) air preheater d) Recuperator
Description : Air preheater is not used as a waste heat recovery system in a____. a) Boiler b) billet Reheating Furnace c) Heat treatment furnace d) compressor
Last Answer : compressor
Description : Recuperated is used mainly as a waste heat recovery system in a ____. a) Boiler b) Billet Reheating Furnace c) Compressor d) None of the above
Last Answer : Billet Reheating Furnace
Description : Major advantage of waste heat recovery in industry is: a) Reduction in pollution b) increase in efficiency c) Both a & b d) none of the above
Last Answer : Both a & b
Description : Which of the following materials is a good insulator? A. steel B. aluminum C. glass D. copper
Last Answer : Answer: C
Description : H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware
Last Answer : (A) Aluminium, mild steel, stainless steel, concrete & tin
Description : The coefficient of static friction will have the highest value in case of a.Mild steel and mild steel b.Mild steel and copper c.Cast iron and steel d.Rope and wood e.Any of the above loctions
Last Answer : d. Rope and wood
Description : Cutter Bar made of a) Copper b) High Grade Steel c) Cast iron d) None of the above
Last Answer : High Grade Steel