Flash point of a liquid petroleum fuel gives an idea about its (A) Volatility (B) Explosion hazards characteristics (C) Nature of boiling point diagram (D) All (A), (B) and (C)

Flash point of a liquid petroleum fuel gives an idea about its
(A) Volatility
(B) Explosion hazards characteristics
(C) Nature of boiling point diagram
(D) All (A), (B) and (C)
by

1 Answer

Answer :

(D) All (A), (B) and (C)
by

Related questions

Flash point of an oil gives an idea of the (A) Nature of boiling point diagram of the system (B) Amount of low boiling fraction present (C) Explosion hazards (D) All (A), (B) and (C)

Description : Flash point of an oil gives an idea of the (A) Nature of boiling point diagram of the system (B) Amount of low boiling fraction present (C) Explosion hazards (D) All (A), (B) and (C)

Last Answer : (A) Nature of boiling point diagram of the system

Pick out the wrong statement. (A) Constant pressure distillation cannot separate an Azeotropic mixture (B) Relative volatility of a binary mixture changes appreciably with the minor change in temperature (C) The relative volatility of a binary mixture at Azeotropic composition is unity (D) Flash distillation is practised on wide spread scale in petroleum refinery

Description : Pick out the wrong statement. (A) Constant pressure distillation cannot separate an Azeotropic mixture (B) Relative volatility of a binary mixture changes appreciably with the minor change in ... unity (D) Flash distillation is practised on wide spread scale in petroleum refinery

Last Answer : (B) Relative volatility of a binary mixture changes appreciably with the minor change in temperature

Petroleum liquid fuels having flash point greater than 66°C is considered as safe during storage and handling. Which of the following has flash point > 66°C? (A) Naphtha (B) Petrol (C) Kerosene (D) Heavy fuel oil

Description : Petroleum liquid fuels having flash point greater than 66°C is considered as safe during storage and handling. Which of the following has flash point > 66°C? (A) Naphtha (B) Petrol (C) Kerosene (D) Heavy fuel oil

Last Answer : (D) Heavy fuel oil

Pick out the correct statement. (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of non￾ideal binary system by distillation (B) A sharp decrease in pressure drop is an indication of flooding in a distillation coloumn (C) Solvent used in extractive distillation should be of high volatility (D) Flash distillation is suitable for separating components which have very close boiling temperature

Description : Pick out the correct statement. (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of ... Flash distillation is suitable for separating components which have very close boiling temperature

Last Answer : (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of non￾ideal binary system by distillation

By higher octane number of SI fuel, it is meant that the fuel has (a) Higher heating value (b) Higher flash point (c) Lower volatility (d) Longer ignition delay

Description : By higher octane number of SI fuel, it is meant that the fuel has (a) Higher heating value (b) Higher flash point (c) Lower volatility (d) Longer ignition delay

Last Answer : Ans : d

Pick out the wrong statement. (A) LPG is also used as fuel for automobiles & small furnaces and for cutting & welding of metals (B) The minimum temperature, at which a petroleum oil vapor catches fire and continues to burn, is called its flash point (C) Each ton of petroleum oil on distillation produces about 30-50 Nm3 of gas (D) Maximum yield of naphthalene is obtained on distillation of crude oil

Description : Pick out the wrong statement. (A) LPG is also used as fuel for automobiles & small furnaces and for cutting & welding of metals (B) The minimum temperature, at which a petroleum oil vapor catches ... about 30-50 Nm3 of gas (D) Maximum yield of naphthalene is obtained on distillation of crude oil

Last Answer : (B) The minimum temperature, at which a petroleum oil vapor catches fire and continues to burn, is called its flash point

Presence of soluble organics in polluted water causes (A) Undesirable plants growth (B) Depletion of oxygen (C) Fire hazards (D) Explosion hazards

Description : Presence of soluble organics in polluted water causes (A) Undesirable plants growth (B) Depletion of oxygen (C) Fire hazards (D) Explosion hazards

Last Answer : (B) Depletion of oxygen

Presence of non-biodegradable substances, like alkyl benzene sulphonate (ABS) from the detergents in polluted water stream causes (A) Fire hazards (B) Explosion hazards (C) Persistent foam (D) Depletion of dissolved oxygen

Description : Presence of non-biodegradable substances, like alkyl benzene sulphonate (ABS) from the detergents in polluted water stream causes (A) Fire hazards (B) Explosion hazards (C) Persistent foam (D) Depletion of dissolved oxygen

Last Answer : (C) Persistent foam

Example of anthropogenic hazards are: (a) Chemical explosion (b) Earthquake (c) Flood (d) Wild fire

Description : Example of anthropogenic hazards are: (a) Chemical explosion (b) Earthquake (c) Flood (d) Wild fire

Last Answer : (a) Chemical explosion

Use of water as a manometric liquid suffers from the disadvantage of its (A) Low vapour pressure (B) Corrosive nature (C) High vapour pressure (D) High boiling point

Description : Use of water as a manometric liquid suffers from the disadvantage of its (A) Low vapour pressure (B) Corrosive nature (C) High vapour pressure (D) High boiling point

Last Answer : (C) High vapour pressure

Solvent used in extractive distillation (A) Is of low volatility (B) Forms a low boiling azeotrope (C) Forms a high boiling azeotrope (D) Does not alter the relative volatility of the original components

Description : Solvent used in extractive distillation (A) Is of low volatility (B) Forms a low boiling azeotrope (C) Forms a high boiling azeotrope (D) Does not alter the relative volatility of the original components

Last Answer : (B) Forms a low boiling azeotrope

Entrainer used in Azeotropic distillation should (A) Form a low boiling azeotrope with one of the constituents of the mixture (B) Form a new azeotrope of low relative volatility with one of the constituents of the mixture (C) Have high latent heat of vaporisation (D) Have high viscosity to provide high tray efficiency

Description : Entrainer used in Azeotropic distillation should (A) Form a low boiling azeotrope with one of the constituents of the mixture (B) Form a new azeotrope of low relative volatility with one of the ... (C) Have high latent heat of vaporisation (D) Have high viscosity to provide high tray efficiency

Last Answer : (A) Form a low boiling azeotrope with one of the constituents of the mixture

Mercaptans are added to liquefied petroleum gas (LPG) to (A) Reduce its cost (B) Narrow down its explosion limit (C) Assist in checking its leakage from cylinder (D) Increase its calorific value

Description : Mercaptans are added to liquefied petroleum gas (LPG) to (A) Reduce its cost (B) Narrow down its explosion limit (C) Assist in checking its leakage from cylinder (D) Increase its calorific value

Last Answer : (C) Assist in checking its leakage from cylinder

Which of the following types of nuclear reactors is most prone to radioactive hazards? (A) Pressurised water reactor (B) Gas cooled reactor (C) Molten sodium cooled reactor (D) Boiling water reactor

Description : Which of the following types of nuclear reactors is most prone to radioactive hazards? (A) Pressurised water reactor (B) Gas cooled reactor (C) Molten sodium cooled reactor (D) Boiling water reactor

Last Answer : (D) Boiling water reactor

Distillation at reduced pressure is used for liquids which (a) Have high boiling points (b) Have low boiling points (c) Have high volatility (d) Decompose before their boiling points

Description : Distillation at reduced pressure is used for liquids which (a) Have high boiling points (b) Have low boiling points (c) Have high volatility (d) Decompose before their boiling points

Last Answer : Ans:(d)

Asphalts are(A) Low molecular weight & low boiling point compounds present in petroleum (B) Desirable in catalytic cracking feedstock, because they produce coke (C) Readily oxidisable and form carbonaceous sludge (D) All (A), (B) & (C)

Description : Asphalts are (A) Low molecular weight & low boiling point compounds present in petroleum (B) Desirable in catalytic cracking feedstock, because they produce coke (C) Readily oxidisable and form carbonaceous sludge (D) All (A), (B) & (C)

Last Answer : (C) Readily oxidisable and form carbonaceous sludge

Which of the following performance characteristics of a S.I engine is not affected by the front end volatility of the petrol used? (A) Vapour locking (B) Hot starting (C) Spark plug fouling (D) All 'a', 'b' & 'c'

Description : Which of the following performance characteristics of a S.I engine is not affected by the front end volatility of the petrol used? (A) Vapour locking (B) Hot starting (C) Spark plug fouling (D) All 'a', 'b' & 'c'

Last Answer : (C) Spark plug fouling

Consider the following statements: 1. Carbyne is an allotrope of carbon. 2. Gasoline, used as a fuel in motor vehicles is a mixture of petrol and alcohol. 3. Petroleum is also known as 'liquid gold'. 4. The various components of crude oil are separated by fractional distillation. The correct statements are: (a) 1, 2 and 4 only (b) 1, 3 and 4 only (c) 1, 2, 3 and 4 (d) 1, 2 and 3 only

Description : Consider the following statements: 1. Carbyne is an allotrope of carbon. 2. Gasoline, used as a fuel in motor vehicles is a mixture of petrol and alcohol. 3. Petroleum is also known as 'liquid gold'. 4. The various components of crude ... (b) 1, 3 and 4 only (c) 1, 2, 3 and 4 (d) 1, 2 and 3 only

Last Answer : Ans:(b)

Separation of a mixture of two gases by absorption in the liquid solvent depends upon the difference in their (A) Viscosity (B) Density (C) Solubility (D) Relative volatility

Description : Separation of a mixture of two gases by absorption in the liquid solvent depends upon the difference in their (A) Viscosity (B) Density (C) Solubility (D) Relative volatility

Last Answer : (C) Solubility

When the liquid phase and vapour phase of a binary system obeys Raoult's and Dalton's law respectively, the relative volatility is the ratio of (A) Vapour pressure of component A to that of component B (B) Vapour pressure of component A to the total pressure (C) Vapour pressure of component A to the partial pressure of A (D) Partial pressure of component A to the total pressure

Description : When the liquid phase and vapour phase of a binary system obeys Raoult's and Dalton's law respectively, the relative volatility is the ratio of (A) Vapour pressure of component A to that of ... to the partial pressure of A (D) Partial pressure of component A to the total pressure

Last Answer : (A) Vapour pressure of component A to that of component B

Relative volatility varies with the concentration of component for an ideal solution. The relative volatility of a binary mixture may be defined as the ratio of vapor pressure of component 'A' to that of component 'B', when (A) Only vapor phase follows Raoult's law (B) Only liquid phase obeys Dalton's law (C) Liquid phase obeys Dalton's law and vapor phase obeys Raoult's law (D) Vapor phase obeys Dalton's law and liquid phase obeys Raoult's law

Description : Relative volatility varies with the concentration of component for an ideal solution. The relative volatility of a binary mixture may be defined as the ratio of vapor pressure of component 'A' to that of ... law (D) Vapor phase obeys Dalton's law and liquid phase obeys Raoult's law

Last Answer : (D) Vapor phase obeys Dalton's law and liquid phase obeys Raoult's law

Which petroleum refinery product has the lowest boiling point? -General Knowledge

Description : Which petroleum refinery product has the lowest boiling point? -General Knowledge

Last Answer : The answer is 'Gasoline'

Which petroleum refinery product has the lowest boiling point? -Do You Know?

Description : Which petroleum refinery product has the lowest boiling point? -Do You Know?

Last Answer : answer:

Which petroleum refinery product has the lowest boiling point? -General Knowledge

Description : Which petroleum refinery product has the lowest boiling point? -General Knowledge

Last Answer : answer:

Which petroleum refinery product has the lowest boiling point? -General Knowledge

Description : Which petroleum refinery product has the lowest boiling point? -General Knowledge

Last Answer : answer:

Which one of the following petroleum refinery products has the lowest boiling point? (1) Kerosene (2) Gasoline (3) Diesel (4) Lubricating oil

Description : Which one of the following petroleum refinery products has the lowest boiling point? (1) Kerosene (2) Gasoline (3) Diesel (4) Lubricating oil

Last Answer : (4) Lubricating oil Explanation: Lubricating oil is the most commonly used lubricant because of its wide range of possible applications. The two basic categories of lube oil are mineral and synthetic.

Which petroleum refinery product has the lowest boiling point?

Description : Which petroleum refinery product has the lowest boiling point?

Last Answer : Gasoline

1. Which country has the briefest Constitution in the world? 2. Which petroleum refinery product has the lowest boiling point? 3. In which policy India opted for ‘Mixed Economy’? 4. In which state has India’s largest private sector sea port been commissioned recently? 5. By whom was the 'Shahnama' written?

Description : 1. Which country has the briefest Constitution in the world? 2. Which petroleum refinery product has the lowest boiling point? 3. In which policy India opted for Mixed Economy'? 4. In which state ... was given in which year? 20. During which reign was the East India Company founded in London?

Last Answer : Answer : 1. USA 2. Gasoline 3. Industrial Policy of 1948 4. Andhra Pradesh 5. Firdausi 6. 3½ ft 7. Hargobind Khurana 8. B. R. Ambedkar 9. NH 7 10. Punjab and Sind 11. Neutron 12. Junko Tabei 13. ... 16. Dr. F G. Banting 17. About 3 years since Dec 9, 1946 18. Wrought iron 19. 1991 20. Akbar

Which of the following is a device used on a tractor or stationary engine for maintaining nearly constant engine speed under varying loads? 1. Volatility of fuel 2. Governor 3. Pre-ignition 4. carburetor

Description : Which of the following is a device used on a tractor or stationary engine for maintaining nearly constant engine speed under varying loads? 1. Volatility of fuel 2. Governor 3. Pre-ignition 4. carburetor

Last Answer : <!-- [if !supportLists] -->1.   <!-- [endif] -->ans 2  

Large scale usage of flash distillation is practised in (A) Soap manufacturing (B) Ammonia synthesis plant (C) Polymerisation industry (D) Petroleum refining

Description : Large scale usage of flash distillation is practised in (A) Soap manufacturing (B) Ammonia synthesis plant (C) Polymerisation industry (D) Petroleum refining

Last Answer : (D) Petroleum refining

Tetraethyl lead (TEL) is added to petrol to (a) prevent its freezing (b) increase its boiling point (c) increase its flash point (d) increase its anti-knocking rating

Description : Tetraethyl lead (TEL) is added to petrol to (a) prevent its freezing (b) increase its boiling point (c) increase its flash point (d) increase its anti-knocking rating

Last Answer : Ans:(d)

In general, the limit of inflammability/explosion limit of fuel gases is widened by the (A) Increase in gas pressure (B) Increase in temperature (i.e. preheating) (C) Use of pure oxygen for combustion instead of air (D) All (A), (B) & (C)

Description : In general, the limit of inflammability/explosion limit of fuel gases is widened by the (A) Increase in gas pressure (B) Increase in temperature (i.e. preheating) (C) Use of pure oxygen for combustion instead of air (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Which temperature for a lubricating oil will be lowest ? (A) Flash point (B) Fire point (C) Pour point (D) Boiling

Description : Which temperature for a lubricating oil will be lowest ? (A) Flash point (B) Fire point (C) Pour point (D) Boiling

Last Answer : Ans: C

The most important property for a jet fuel is its (A) Viscosity (B) Freezing point (C) Calorific value (D) Flash poin

Description : The most important property for a jet fuel is its (A) Viscosity (B) Freezing point (C) Calorific value (D) Flash poin

Last Answer : (B) Freezing point

Turndown ratio of a burner gives an idea of the __________ in the furnace. (A) Range of fuel firing rates (B) Volume of the combustion chamber (C) Maximum heat input rate only (D) Minimum heat input rate only

Description : Turndown ratio of a burner gives an idea of the __________ in the furnace. (A) Range of fuel firing rates (B) Volume of the combustion chamber (C) Maximum heat input rate only (D) Minimum heat input rate only

Last Answer : (A) Range of fuel firing rates

The proper arrangement of the petroleum fractions in order of their boiling points is (A) Lubricating oil > diesel > petrol > LPG (B) Lubricating oil > petrol > diesel > LPG (C) Petrol > lubricating oil > diesel > LPG (D) Petrol > diesel > LPG > lubricating oil

Description : The proper arrangement of the petroleum fractions in order of their boiling points is (A) Lubricating oil > diesel > petrol > LPG (B) Lubricating oil > petrol > diesel > LPG (C) Petrol > lubricating oil > diesel > LPG (D) Petrol > diesel > LPG > lubricating oil

Last Answer : (A) Lubricating oil > diesel > petrol > LPG

Liquefied Petroleum Gas (LPG) is mainly a mixture of (A) Propane & butane (B) Methane & ethane (C) High boiling olefins (D) High boiling naphthenes

Description : Liquefied Petroleum Gas (LPG) is mainly a mixture of (A) Propane & butane (B) Methane & ethane (C) High boiling olefins (D) High boiling naphthenes

Last Answer : (A) Propane & butane

Which of the following is not an important property of fuel oil/furnace oil? (A) Sulphur content (B) Viscosity (C) Aniline point (D) Flash point

Description : Which of the following is not an important property of fuel oil/furnace oil? (A) Sulphur content (B) Viscosity (C) Aniline point (D) Flash point

Last Answer : (C) Aniline point

In Gas-Liquid Chromatography, some of the samples need to be derivatized in order to increase their (A) volatility (B) solubility (C)thermal conductivity (D) polarizability

Description : In Gas-Liquid Chromatography, some of the samples need to be derivatized in order to increase their (A) volatility (B) solubility (C)thermal conductivity (D) polarizability

Last Answer : (D) polarizability

Explain with neat diagram the different hazards and the way to eliminate them.

Description : Explain with neat diagram the different hazards and the way to eliminate them.

Last Answer : • Classification of hazards • Static hazard & Dynamic hazard definitions • K map for selected functions • Method of elimination • Essential hazards

In catalytic alkylation, higher iso-butane to olefin ratio gives (A) Low final boiling point product (B) Higher yield (C) Both (A) and (B) (D) Neither (A) nor (B

Description : In catalytic alkylation, higher iso-butane to olefin ratio gives (A) Low final boiling point product (B) Higher yield (C) Both (A) and (B) (D) Neither (A) nor (B

Last Answer : (A) Low final boiling point product

Crude oil is subjected to vacuum distillation in the last stage, because (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose (B) Lighter/low boiling products are prone to thermal decomposition (C) High purity products can be obtained thereby (D) None of these

Description : Crude oil is subjected to vacuum distillation in the last stage, because (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose (B) Lighter/low ... prone to thermal decomposition (C) High purity products can be obtained thereby (D) None of these

Last Answer : (A) High boiling point products like heavy fuel oil & lubricating oils are heat sensitive and may decompose

The average boiling point of aviation turbine fuel is closest to that of (A) Lubricating oils (B) LPG (C) Diesel (D) Kerosene

Description : The average boiling point of aviation turbine fuel is closest to that of (A) Lubricating oils (B) LPG (C) Diesel (D) Kerosene

Last Answer : (D) Kerosene

Boiling point diagram is not affected by the ambient (A) Pressure (B) Humidity (C) Temperature (D) Both (B) and (C)

Description : Boiling point diagram is not affected by the ambient (A) Pressure (B) Humidity (C) Temperature (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Flash distillation is suitable for separating the constituents of a binary system, which (A) Form minimum boiling azeotrope (B) Have very wide boiling points (C) Have very close boiling points (D) Form constant boiling azeotrope

Description : Flash distillation is suitable for separating the constituents of a binary system, which (A) Form minimum boiling azeotrope (B) Have very wide boiling points (C) Have very close boiling points (D) Form constant boiling azeotrope

Last Answer : (B) Have very wide boiling points

Flash distillation is suitable for the separation of components (A) Having very close boiling points (B) Which form maximum boiling azeotrope (C) Having very wide boiling points (D) Which form minimum boiling azeotrope

Description : Flash distillation is suitable for the separation of components (A) Having very close boiling points (B) Which form maximum boiling azeotrope (C) Having very wide boiling points (D) Which form minimum boiling azeotrope

Last Answer : (C) Having very wide boiling points

Parts A, B, C and D of the human eye are shown in the diagram. Select the option which gives correct identification along with its functions characteristics. (a) C-Aqueous chamber-Reflects the light which does not pass through the lens. (b) D - Choroid - Its anterior part forms ciliary body. (c) A - Retina - Contains photoreceptors, i.e., rods and cones. (d) B - Blind spot-Has only a few rods and cones.

Description : Parts A, B, C and D of the human eye are shown in the diagram. Select the option which gives correct identification along with its functions characteristics. (a) C-Aqueous chamber-Reflects the light which does not ... , i.e., rods and cones. (d) B - Blind spot-Has only a few rods and cones.

Last Answer : (c) A - Retina - Contains photoreceptors, i.e., rods and cones.

Smoke volatility index is equal to smoke point plus (A) 0.42 × (% distilled at 204°C) (B) 5 mm (C) 0.84 × (% distilled at 204°C) (D) 10 mm approximately

Description : Smoke volatility index is equal to smoke point plus (A) 0.42 × (% distilled at 204°C) (B) 5 mm (C) 0.84 × (% distilled at 204°C) (D) 10 mm approximately

Last Answer : (A) 0.42 × (% distilled at 204°C)

A good lubricant should have high (A) Viscosity index (B) Volatility (C) Pour point (D) None of these

Description : A good lubricant should have high (A) Viscosity index (B) Volatility (C) Pour point (D) None of these

Last Answer : (A) Viscosity index

In case of liquid petrofuels, momentary combustion is observed at its (A) Flash point (B) Preheating temperature corresponding to viscosity of 25 centistokes (C) Flame temperature (D) Fire point

Description : In case of liquid petrofuels, momentary combustion is observed at its (A) Flash point (B) Preheating temperature corresponding to viscosity of 25 centistokes (C) Flame temperature (D) Fire point

Last Answer : (A) Flash point