The specific heat of saturated water vapour at 100°C is (A) ∞ (B) -ve (C) 0 (D) +ve

The specific heat of saturated water vapour at 100°C is (A) ∞
(B) -ve
(C) 0
(D) +ve
by

1 Answer

Answer :

B) -ve
by

Related questions

The slope of the operating line for a single component co-current absorber when plotted in terms of mole ratio units is (A) 0 (B) ∞ (C) -ve (D) +ve

Description : The slope of the operating line for a single component co-current absorber when plotted in terms of mole ratio units is (A) 0 (B) ∞ (C) -ve (D) +ve

Last Answer : (C) -ve

The Joule-Thomson co-efficient is defined as (∂T/∂P)H. Its value at the inversion point is (A) ∞ (B) 1 (C) 0 (D) -ve

Description : The Joule-Thomson co-efficient is defined as (∂T/∂P)H. Its value at the inversion point is (A) ∞ (B) 1 (C) 0 (D) -ve

Last Answer : (C) 0

The difference between isothermal compressibility and adiabatic compressibility for an ideal gas is (A) 0 (B) +ve (C) -ve (D) ∞

Description : The difference between isothermal compressibility and adiabatic compressibility for an ideal gas is (A) 0 (B) +ve (C) -ve (D) ∞

Last Answer : (B) +ve

Joule-Thomson Co-efficient at any point on the inversion curve is (A) ∞ (B) +ve (C) 0 (D) -ve

Description : Joule-Thomson Co-efficient at any point on the inversion curve is (A) ∞ (B) +ve (C) 0 (D) -ve

Last Answer : (C) 0

What is the value of Joule-Thomson co-efficient for an ideal gas? (A) +ve (B) -ve (C) 0 (D) ∞

Description : What is the value of Joule-Thomson co-efficient for an ideal gas? (A) +ve (B) -ve (C) 0 (D) ∞

Last Answer : (C) 0

Joule-Thomson co-efficient which is defined as, η = (∂T/∂P)H = 1/Cp (∂H/∂T)P, changes sign at a temperature known as inversion temperature. The value of Joule-Thomson co-efficient at inversion temperature is (A) 0 (B) ∞ (C) +ve (D) -ve

Description : Joule-Thomson co-efficient which is defined as, η = (∂T/∂P)H = 1/Cp (∂H/∂T)P, changes sign at a temperature known as inversion temperature. The value of Joule-Thomson co-efficient at inversion temperature is (A) 0 (B) ∞ (C) +ve (D) -ve

Last Answer : (A) 0

Gibbs free energy of mixing at constant pressure and temperature is always (A) 0 (B) ∞ (C) + ve (D) - ve

Description : Gibbs free energy of mixing at constant pressure and temperature is always (A) 0 (B) ∞ (C) + ve (D) - ve

Last Answer : (D) - ve

At the boiling point of the liquid at the prevailing pressure, the saturated absolute humidity becomes (A) 1 (B) 0 (C) ∞ (D) None of these

Description : At the boiling point of the liquid at the prevailing pressure, the saturated absolute humidity becomes (A) 1 (B) 0 (C) ∞ (D) None of these

Last Answer : (C) ∞

Steam at 100°C causes more severe burns than water at 100° C because – (1) steam has no specific heat capacity (2) steam has latent heat of vaporization (3) water has no specific heat capacity (4) water has latent heat of fusion

Description : Steam at 100°C causes more severe burns than water at 100° C because – (1) steam has no specific heat capacity (2) steam has latent heat of vaporization (3) water has no specific heat capacity (4) water has latent heat of fusion

Last Answer : (2) steam has latent heat of vaporization Explanation: It is because steam releases its latent heat as it condenses, which is substantial. The heat of vaporization of steam is over 2000 J per gram. And when it releases that it's then 100 degree water, the same as boiling water.

Steam undergoes isentropic expansion in a turbine from 5000 kPa and 400°C (entropy = 6.65 kJ/kg K) to 150 kPa) (entropy of saturated liquid = 1.4336 kJ/kg. K, entropy of saturated vapour = 7.2234 kJ/kg. K) The exit condition of steam is (A) Superheated vapour (B) Partially condensed vapour with quality of 0.9 (C) Saturated vapour (D) Partially condensed vapour with quality of 0.1

Description : Steam undergoes isentropic expansion in a turbine from 5000 kPa and 400°C (entropy = 6.65 kJ/kg K) to 150 kPa) (entropy of saturated liquid = 1.4336 kJ/kg. K, entropy of saturated vapour = 7.2234 ... vapour with quality of 0.9 (C) Saturated vapour (D) Partially condensed vapour with quality of 0.1

Last Answer : (A) Superheated vapour

A long iron rod initially at a temperature of 20°C has one end dipped in boiling water (100°C) at time, t = 0. The curved surface of the rod is insulated so that heat conduction is one dimensional in the axial direction. The temperature at a distance 100 mm from the dipped end becomes 40°C at time, t = 200 s. The same temperature is achieved at a distance of 200 mm from the dipped end at time (A) t = 283 s (B) t = 356 s (C) t = 400 s (D) t = 800 s

Description : A long iron rod initially at a temperature of 20°C has one end dipped in boiling water (100°C) at time, t = 0. The curved surface of the rod is insulated so that heat conduction is one dimensional in the axial direction. The ... = 283 s (B) t = 356 s (C) t = 400 s (D) t = 800 s

Last Answer : (D) t = 800 s

A batch adiabatic reactor at an initial temperature of 373°K is being used for the reaction, A → B. Assume the heat of reaction is - 1kJ/mole at 373°K and heat capacity of both A and B to be constant and equal to 50J/mole.K. The temperature rise after a conversion of 0.5 will be: (A) 5°C (B) 10°C (C) 20°C (D) 100°C

Description : A batch adiabatic reactor at an initial temperature of 373°K is being used for the reaction, A → B. Assume the heat of reaction is - 1kJ/mole at 373°K and heat capacity of both A and B to be constant and equal ... rise after a conversion of 0.5 will be: (A) 5°C (B) 10°C (C) 20°C (D) 100°C

Last Answer : (B) 10°C

Water always boils when its (A) Temperature reaches 100° C (B) Vapour pressure equals 76 cm of Hg (C) Saturated vapour pressure equals the external pressure on its surface (D) Saturated vapour pressure is less than the atmospheric pressure

Description : Water always boils when its (A) Temperature reaches 100° C (B) Vapour pressure equals 76 cm of Hg (C) Saturated vapour pressure equals the external pressure on its surface (D) Saturated vapour pressure is less than the atmospheric pressure

Last Answer : (C) Saturated vapour pressure equals the external pressure on its surface

Adiabatic compression of a saturated water vapour makes it (A) Supersaturated (B) Superheated (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Adiabatic compression of a saturated water vapour makes it (A) Supersaturated (B) Superheated (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : B) Superheated

When dry bulb temperature & wet bulb temperature of moist air is the same, it means that the (A) Partial pressure of water vapour is less than the total pressure (B) Humidity is < 100% & dew point temperature of air has not reached (C) Dew point temperature of air has not reached & air is not saturated fully (D) Air is fully saturated

Description : When dry bulb temperature & wet bulb temperature of moist air is the same, it means that the (A) Partial pressure of water vapour is less than the total pressure (B) Humidity is < 100% & dew ... Dew point temperature of air has not reached & air is not saturated fully (D) Air is fully saturated

Last Answer : (D) Air is fully saturated

Molar heat capacity of water in equilibrium with ice at constant pressure is __________ Kcal/kg mole. °K (A) 0 (B) ∞ (C) 50 (D) 100

Description : Molar heat capacity of water in equilibrium with ice at constant pressure is __________ Kcal/kg mole. °K (A) 0 (B) ∞ (C) 50 (D) 100

Last Answer : (B) ∞

Gas cooling as compared to water cooling of nuclear reactors (A) Cannot attain a high temperature (B) Is more efficient as gas has a higher specific heat (C) Can produce only saturated steam for feeding to power turbine (D) None of these

Description : Gas cooling as compared to water cooling of nuclear reactors (A) Cannot attain a high temperature (B) Is more efficient as gas has a higher specific heat (C) Can produce only saturated steam for feeding to power turbine (D) None of these

Last Answer : (D) None of these

In saturated gas, the (A) Vapour is in equilibrium with the liquid at the gas temperature (B) Vapour is in equilibrium with the liquid at the room temperature (C) Partial pressure of vapour equals the vapour pressure of the liquid at room temperature (D) None of these

Description : In saturated gas, the (A) Vapour is in equilibrium with the liquid at the gas temperature (B) Vapour is in equilibrium with the liquid at the room temperature (C) Partial pressure of vapour equals the vapour pressure of the liquid at room temperature (D) None of these

Last Answer : (A) Vapour is in equilibrium with the liquid at the gas temperature

In case of steam distillation, the steam leaving the liquid is not completely saturated with distillate vapour, because(A) Temperature is less(B) Total pressure is less(C) Mixing of steam with the material being vaporised is not so intimate asto result in equilibrium condition(D) Saturated steam is used for steam distillation

Description : In case of steam distillation, the steam leaving the liquid is not completely saturated with distillate vapour, because (A) Temperature is less (B) Total pressure is less (C) Mixing of steam ... not so intimate as to result in equilibrium condition (D) Saturated steam is used for steam distillation

Last Answer : (C) Mixing of steam with the material being vaporised is not so intimate as to result in equilibrium condition

Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In small columns, local efficiency is larger than Murphree efficiency; in large columns local efficiency is smaller than Murphree efficiency (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s (D) The concentration and hydrodynamic boundary layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Description : Pick out the wrong statement. (A) In the McCabe-Thiele diagram for binary distillation, vertical feed line represents saturated liquid feed and horizontal feed line represents saturated vapour feed (B) In ... layers over a flat plate are of equal thickness, if Schmidt number is equal to unity

Last Answer : (C) For Laminar flow over a plate of length L, the local mass transfer co￾efficient at a distance L from the leading edge is 1.5 × 10 -2m/s. Then the average mass transfer co-efficient for the plate is 2 × 10 -2m/s

The temperature to which a vapour gas mixture must be cooled (at varying humidity) to become saturated is called the __________ temperature. (A) Dew point (B) Wet bulb (C) Dry bulb (D) None of these

Description : The temperature to which a vapour gas mixture must be cooled (at varying humidity) to become saturated is called the __________ temperature. (A) Dew point (B) Wet bulb (C) Dry bulb (D) None of these

Last Answer : (D) None of these

The feed to fractionating column is changed from saturated vapour to saturated liquid. If the separation and reflux ratio remains unchanged, the number of ideal stages will (A) Increase (B) Decrease (C) Remain same (D) Depend on saturated boiling point; may increase or decrease

Description : The feed to fractionating column is changed from saturated vapour to saturated liquid. If the separation and reflux ratio remains unchanged, the number of ideal stages will (A) Increase (B) Decrease (C) Remain same (D) Depend on saturated boiling point; may increase or decrease

Last Answer : (A) Increase

The relative saturation of a partially saturated mixture of vapour and gas can be increased by __________ of the mixture. (A) Reducing the total pressure (B) Increasing the total pressure (C) Reducing the temperature (D) Both (B) and (C)

Description : The relative saturation of a partially saturated mixture of vapour and gas can be increased by __________ of the mixture. (A) Reducing the total pressure (B) Increasing the total pressure (C) Reducing the temperature (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Any substance above its critical temperature exists as (A) Saturated vapour (B) Solid (C) Gas (D) Liquid

Description : Any substance above its critical temperature exists as (A) Saturated vapour (B) Solid (C) Gas (D) Liquid

Last Answer : (C) Gas

A liquid under pressure greater than its vapour pressure for the temperature involved is called a __________ liquid. (A) Sub-cooled (B) Saturated (C) Non-solidifiable (D) None of these

Description : A liquid under pressure greater than its vapour pressure for the temperature involved is called a __________ liquid. (A) Sub-cooled (B) Saturated (C) Non-solidifiable (D) None of these

Last Answer : (A) Sub-cooled

In a 1-1 concurrent heat exchanger, if the tube side fluid outlet temperature is equal to the shell side fluid outlet temperature, then the LMTD is (A) ∞ (B) 0 (C) Equal to the difference between hot and cold fluids inlet temperature (D) Equal to the difference between hot fluid inlet temperature and cold fluid outlet temperature

Description : In a 1-1 concurrent heat exchanger, if the tube side fluid outlet temperature is equal to the shell side fluid outlet temperature, then the LMTD is (A) ∞ (B) 0 ... temperature (D) Equal to the difference between hot fluid inlet temperature and cold fluid outlet temperature

Last Answer : (B) 0

What is the thermal conductivity of a perfect heat insulator? (A) Zero (B) One (C) ∞ (D) Between 0 and ∞

Description : What is the thermal conductivity of a perfect heat insulator? (A) Zero (B) One (C) ∞ (D) Between 0 and ∞

Last Answer : (A) Zero

Determine the amount of heat required to produce 1Kg of steam at a pressure of 7 bar, at a temperature 29 degree Celsius, under the following . (i) When the steam is wet having dryness fraction 0.87 (ii) When the steam is dry saturated Assume specific heat = 2.35KJ/KgK

Description : Determine the amount of heat required to produce 1Kg of steam at a pressure of 7 bar, at a temperature 29 degree Celsius, under the following . (i) When the steam is wet having dryness fraction 0.87 (ii) When the steam is dry saturated Assume specific heat = 2.35KJ/KgK 

Last Answer : P 7bar T 29ᵒC x=0.9 m =1kg C p =2.35 KJ/KgK At pressure 7 bar saturation Temp T sat =165 ᵒC h f =697.2 KJ/Kg h fg= 2064.8 KJ/Kg i) Heat required when steam is wet ... ) When the stem is dry saturated hg=hf+hfg =2762 kj Heat actually required = 2762-121.8 = 2640.2 kj

One kilogram of water at 0°C is changed to superheated steam of one atm pressure and 300° C. The major heat consumption in the process will be to (A) Heat the water from 0°C to 100°C (B) Evaporate the water (C) To superheat the steam (D) Data insufficient, can't be predicted

Description : One kilogram of water at 0°C is changed to superheated steam of one atm pressure and 300° C. The major heat consumption in the process will be to (A) Heat the water from 0°C to 100°C (B) Evaporate the water (C) To superheat the steam (D) Data insufficient, can't be predicted

Last Answer : (B) Evaporate the water

Walls of a cubical oven are of thickness l, and they are made of material of thermal conductivity k. The temperature inside the oven is 100°C and the inside heat transfer co-efficient is ‘3k/l’. If the wall temperature on the outside is held at 25°C, what is the inside wall temperature in degree centigrade?(A) 35.5 (B) 43.75 (C) 81.25 (D) 48.25

Description : Walls of a cubical oven are of thickness l, and they are made of material of thermal conductivity k. The temperature inside the oven is 100°C and the inside heat transfer co-efficient is 3k/l'. If the wall temperature ... wall temperature in degree centigrade? (A) 35.5 (B) 43.75 (C) 81.25 (D) 48.25

Last Answer : (C) 81.25

Heat in BTU necessary to increase the temperature of 1 lb of gas and its accompanying vapour by 1°F is called the (A) Latent heat (B) Humid heat (C) Specific heat (D) Sensible heat

Description : Heat in BTU necessary to increase the temperature of 1 lb of gas and its accompanying vapour by 1°F is called the (A) Latent heat (B) Humid heat (C) Specific heat (D) Sensible heat

Last Answer : (C) Specific heat

An ideal liquid refrigerant should (A) Not have a sub-atmospheric vapour pressure at the temperature in the refrigerator coils (B) Not have unduly high vapour pressure at the condenser temperature (C) Both (A) and (B) (D) Have low specific heat

Description : An ideal liquid refrigerant should (A) Not have a sub-atmospheric vapour pressure at the temperature in the refrigerator coils (B) Not have unduly high vapour pressure at the condenser temperature (C) Both (A) and (B) (D) Have low specific heat

Last Answer : (C) Both (A) and (B)

When dew point la reached it is said that at that temperature (a) the atmosphere is said to be saturated with water vapour (b) the relative humidity of the atmosphere is 100% (c) the atmosphere can hold no more water vapour (d) All the above

Description : When dew point la reached it is said that at that temperature (a) the atmosphere is said to be saturated with water vapour (b) the relative humidity of the atmosphere is 100% (c) the atmosphere can hold no more water vapour (d) All the above

Last Answer : Ans: (a)

Air is said to be saturated when - (1) it contains maximum content of water vapour (2) its pressure is minimum (3) its thickness is maximum (4) it blows over the barren land

Description : Air is said to be saturated when - (1) it contains maximum content of water vapour (2) its pressure is minimum (3) its thickness is maximum (4) it blows over the barren land

Last Answer : (1) it contains maximum content of water vapour Explanation: When a volume of air at a given temperature holds the maximum amount of water vapour, the air is said to be saturated. Mr is said ... 100 percent or is saturated, moisture will condense, mean-ing the water vapor changes to liquid vapor.

Air is said to be saturated when : (1) it contains maximum content of water vapour (2) its pressure is minimum (3) its thickness is maximum (4) it blows over the barren land

Description : Air is said to be saturated when : (1) it contains maximum content of water vapour (2) its pressure is minimum (3) its thickness is maximum (4) it blows over the barren land

Last Answer :  it contains maximum content of water vapour

The condition of refrigerant before entering the expansion or throttle valve, in a vapour compression system (a) dry vapour (b) wet vapour (c)liquid-vapour mixture (d) high pressure saturated liquid

Description : The condition of refrigerant before entering the expansion or throttle valve, in a vapour compression system (a) dry vapour (b) wet vapour (c)liquid-vapour mixture (d) high pressure saturated liquid

Last Answer : Ans: d

In a vapour compression cycle, the refrigerant immediately after expansion valve is (a) liquid (b) sub-cooled liquid (c) saturated liquid (d) wet vapour

Description : In a vapour compression cycle, the refrigerant immediately after expansion valve is (a) liquid (b) sub-cooled liquid (c) saturated liquid (d) wet vapour

Last Answer : Ans: d

In vapour compression cycle the condition off refrigerant is dry saturated vapour (a) after passing through the condenser (b) before passing through the condenser (c)before entering the expansion valve (d) before entering the compressor

Description : In vapour compression cycle the condition off refrigerant is dry saturated vapour (a) after passing through the condenser (b) before passing through the condenser (c)before entering the expansion valve (d) before entering the compressor

Last Answer : Ans: D

In vapour compression cycle, the condition of refrigerant is high pressure saturated liquid (a) after passing through the condenser (b) before passing through the condenser (c) after passing through the expansion or throttle valve (d) before entering the expansion valve

Description : In vapour compression cycle, the condition of refrigerant is high pressure saturated liquid (a) after passing through the condenser (b) before passing through the condenser (c) after passing through the expansion or throttle valve (d) before entering the expansion valve

Last Answer : Ans: d

In vapour compression cycle, the condition of refrigerant is saturated liquid (a) after passing through the condenser (b) before passing through the condenser (c) after passing through the expansion throttle valve (d) before entering the expansion valve

Description : In vapour compression cycle, the condition of refrigerant is saturated liquid (a) after passing through the condenser (b) before passing through the condenser (c) after passing through the expansion throttle valve (d) before entering the expansion valve

Last Answer : Ans: a

Pressure exerted by fully saturated air, is known (A) Partial pressure (B) Saturation pressure (C) Saturation vapour pressure (D) Both (c) and (d) of the above

Description : Pressure exerted by fully saturated air, is known (A) Partial pressure (B) Saturation pressure (C) Saturation vapour pressure (D) Both (c) and (d) of the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Absolute humidity at a given temperature is equal to weight of moisture present in a unit volume (B) Relative humidity is the ratio of actual vapour pressure and saturation vapour pressure at the same temperature (C) Relative humidity is the ratio of the weight of the vapours present per unit volume to the weight of vapours which could be contained at the same temperature when fully saturated (D) All the above

Description : Pick up the correct statement from the following: (A) Absolute humidity at a given temperature is equal to weight of moisture present in a unit volume (B) Relative humidity is the ratio of ... of vapours which could be contained at the same temperature when fully saturated (D) All the above

Last Answer : Answer: Option D

Cavitation will begin when (A) The pressure at any location reaches an absolute pressure equal to the saturated vapour pressure of the liquid (B) Pressure becomes more than critical pressure (C) Flow is increased (D) Pressure is increased

Description : Cavitation will begin when (A) The pressure at any location reaches an absolute pressure equal to the saturated vapour pressure of the liquid (B) Pressure becomes more than critical pressure (C) Flow is increased (D) Pressure is increased

Last Answer : Answer: Option A

In a liquid-liquid heat exchanger, for the same process temperature, the ratio of the LMTD in parallel flow to the LMTD in counter flow is always (A) < 1 (B) > 1 (C) 1 (D) ∞

Description : In a liquid-liquid heat exchanger, for the same process temperature, the ratio of the LMTD in parallel flow to the LMTD in counter flow is always (A) < 1 (B) > 1 (C) 1 (D) ∞

Last Answer : (A) < 1

In a counter flow heat exchanger, hot fluid enters at 170°C & leaves at 150°C, while the cold fluid enters at 50°C & leaves at 70°C. The arithmetic mean temperature difference in this case is __________ °C. (A) 20 (B) 60 (C) 120 (D) ∞

Description : In a counter flow heat exchanger, hot fluid enters at 170°C & leaves at 150°C, while the cold fluid enters at 50°C & leaves at 70°C. The arithmetic mean temperature difference in this case is __________ °C. (A) 20 (B) 60 (C) 120 (D) ∞

Last Answer : (D) ∞

Saturated steam at 1 atm is discharged from a turbine at 1200 kg/h. Superheated steam at 300 0C and 1 atm is needed as a feed to a heat exchanger. To produce it, the turbine discharge stream is mixed with superheated steam at 400 0C, 1 atm and specific volume of 3.11 m 3 /kg. Calculate the amount of superheated steam at 300 0C produced and the volumetric flow rate of the 400 0C steam.

Description : Saturated steam at 1 atm is discharged from a turbine at 1200 kg/h. Superheated steam at 300 0C  and 1 atm is needed as a feed to a heat exchanger. To produce it, the turbine discharge ... amount of superheated steam at 300 0C produced and the volumetric flow rate of the  400 0C steam.

Last Answer : Solution 1. Mass balance of water 1200 + m1 = m2 ………………………………………… (1) …………………….1 mark 2. Energy balance (1200 kg/h)(2676 kJ/kg) + m1(3278 kJ/kg)

Heat stored in water vapour is – (1) specific heat (2) latent heat (3) absolute heat (4) relative heat

Description : Heat stored in water vapour is – (1) specific heat (2) latent heat (3) absolute heat (4) relative heat

Last Answer : (2) latent heat Explanation: Latent heat is the heat released or absorbed by a body or a thermodynamic system during a process that occurs without a change in temperature. A typical example is a ... the boiling of water. So water vapor which is the end product of evaporated water has latent heat.

Heat stored in water vapour is (1) specific heat (2) latent heat (3) absolute heat (4) relative heat

Description : Heat stored in water vapour is (1) specific heat (2) latent heat (3) absolute heat (4) relative heat

Last Answer : latent heat

Bence jones proteinurial characterized by (A) Non-heat coagulability (B) Heat coagulability at 100°C (C) Heat coagulability at 45 to 60°C (D) Precipitation at 25°C

Description : Bence jones proteinurial characterized by (A) Non-heat coagulability (B) Heat coagulability at 100°C (C) Heat coagulability at 45 to 60°C (D) Precipitation at 25°C

Last Answer : Answer : C

In the pressure cooker, cooking is faster because the increase in vapour pressure - (1) increase the specific heat (2) decreases the specific heat (3) decreases the boiling point (4) increases the boiling point

Description : In the pressure cooker, cooking is faster because the increase in vapour pressure - (1) increase the specific heat (2) decreases the specific heat (3) decreases the boiling point (4) increases the boiling point

Last Answer : (4) increases the boiling point