The main principle of surveying is to work (A) From part to the whole (B) From whole to the part (C) From higher level to the lower level (D) From lower level to higher level

The main principle of surveying is to work
(A) From part to the whole
(B) From whole to the part
(C) From higher level to the lower level
(D) From lower level to higher level
by

1 Answer

Answer :

(B) From whole to the part
by

Related questions

Working from the whole to the part is followed as the fundamental principle of surveying so as to : 1. Distribute errors 2. Improve ease of working 3. Prevent accumulation of errors 4. Compensate error in a way 5. Refer to common datum, say MSL (a) 1, 2 and 4 (b) 1, 3 and 5 (c) 3 and 4 (d) 2 and 5

Description : Working from the whole to the part is followed as the fundamental principle of surveying so as to : 1. Distribute errors 2. Improve ease of working 3. Prevent accumulation of errors 4. Compensate error in a way 5. Refer to common datum ... (a) 1, 2 and 4 (b) 1, 3 and 5 (c) 3 and 4 (d) 2 and 5

Last Answer : (c) 3 and 4

In chain surveying, perpendiculars to the chain line are set out by (A) A theodolite (B) A prismatic compass (C) A level (D) An optical square

Description : In chain surveying, perpendiculars to the chain line are set out by (A) A theodolite (B) A prismatic compass (C) A level (D) An optical square

Last Answer : (D) An optical square

Explain the principle of surveying.

Description : Explain the principle of surveying.

Last Answer : Principle of surveying are as follows: i. To work from whole to part. According to the first principle, the whole area is first enclosed by main stations and main survey ... The new station or ground point is located using linear measurement or angular measurement or both measurements.

Explain principle of chain surveying

Description : Explain principle of chain surveying 

Last Answer : 1) Principle of chain surveying is triangulation 2) Triangulation consists of frame work of triangles. The whole area is divided into network of triangles. 3) A triangle is the only simple plane ... to be adopted depends upon the shape & configuration of the ground & the natural obstacles. 

The type of surveying which requires least office work is (A) Tachometry (B) Trigonometrical levelling (C) Plane table surveying (D) Theodolite surveying

Description : The type of surveying which requires least office work is (A) Tachometry (B) Trigonometrical levelling (C) Plane table surveying (D) Theodolite surveying

Last Answer : (C) Plane table surveying

In chain surveying field work is limited to (A) Linear measurements only (B) Angular measurements only (C) Both linear and angular measurements (D) All the above

Description : In chain surveying field work is limited to (A) Linear measurements only (B) Angular measurements only (C) Both linear and angular measurements (D) All the above

Last Answer : (A) Linear measurements only

Check lines (or proof lines) in Chain Surveying, are essentially required (A) To plot the chain lines (B) To plot the offsets (C) To indicate the accuracy of the survey work (D) To increase the out-turn

Description : Check lines (or proof lines) in Chain Surveying, are essentially required (A) To plot the chain lines (B) To plot the offsets (C) To indicate the accuracy of the survey work (D) To increase the out-turn

Last Answer : (C) To indicate the accuracy of the survey work

In a carburetor the level of the fuel in the float chamber as compared to the level of the main jet in the venture is A. lower B. same C. higher D. same or higher

Description : In a carburetor the level of the fuel in the float chamber as compared to the level of the main jet in the venture is A. lower B. same C. higher D. same or higher

Last Answer : ANSWER : A

A centrifugal pump is required to be primed before starting if it is located (A) At higher level than water level of reservoir (B) At lower level than water level of reservoir (C) Both (a) and (b) (D) Neither (a) nor (b)

Description : A centrifugal pump is required to be primed before starting if it is located  (A) At higher level than water level of reservoir  (B) At lower level than water level of reservoir  (C) Both (a) and (b)  (D) Neither (a) nor (b) 

Last Answer : (A) At higher level than water level of reservoir

As compared to crest of the normal portion of the weir, the crest of the under sluice portion of weir is kept at (A) Lower level (B) Higher level (C) Same level (D) Any of the above depending on the design

Description : As compared to crest of the normal portion of the weir, the crest of the under sluice portion of weir is kept at (A) Lower level (B) Higher level (C) Same level (D) Any of the above depending on the design

Last Answer : Answer: Option A

If cohesion between molecules of a fluid is greater than adhesion between fluid and glass, then the free level of fluid in a dipped glass tube will be(A) Higher than the surface of liquid (B) The same as the surface of liquid (C) Lower than the surface of liquid (D) Unpredictable

Description : If cohesion between molecules of a fluid is greater than adhesion between fluid and glass, then the free level of fluid in a dipped glass tube will be (A) Higher than the surface of liquid (B) The same as the surface of liquid (C) Lower than the surface of liquid (D) Unpredictable

Last Answer : Answer: Option C

Diaphragm of a surveying telescope is held inside (A) Eye-piece (B) Objective (C) Telescope tube at its mid point (D) Telescope at the end nearer the eye-piece

Description : Diaphragm of a surveying telescope is held inside  (A) Eye-piece  (B) Objective  (C) Telescope tube at its mid point  (D) Telescope at the end nearer the eye-piece

Last Answer : (D) Telescope at the end nearer the eye-piece

An internal focussing type surveying telescope, may be focussed by the movement of (A) Objective glass of the telescope (B) Convex-lens in the telescope (C) Concave lens in the telescope (D) Plano-convex lens in the telescope

Description : An internal focussing type surveying telescope, may be focussed by the movement of  (A) Objective glass of the telescope  (B) Convex-lens in the telescope  (C) Concave lens in the telescope  (D) Plano-convex lens in the telescope

Last Answer : (C) Concave lens in the telescope 

In chain surveying tie lines are primarily provided (A) To check the accuracy of the survey (B) To take offsets for detail survey(C) To avoid long offsets from chain lines (D) To increase the number of chain lines

Description : In chain surveying tie lines are primarily provided  (A) To check the accuracy of the survey  (B) To take offsets for detail survey  (C) To avoid long offsets from chain lines  (D) To increase the number of chain lines 

Last Answer : (C) To avoid long offsets from chain lines 

Geodetic surveying is undertaken (A) For production of accurate maps of wide areas (B) For developing the science of geodesy (C) Making use of most accurate instruments and methods of observation (D) All the above

Description : Geodetic surveying is undertaken  (A) For production of accurate maps of wide areas  (B) For developing the science of geodesy  (C) Making use of most accurate instruments and methods of observation  (D) All the above 

Last Answer : (D) All the above 

The accuracy of measurement in chain surveying, does not depend upon (A) Length of the offset (B) Scale of the plotting (C) Importance of the features (D) General layout of the chain lines

Description : The accuracy of measurement in chain surveying, does not depend upon (A) Length of the offset (B) Scale of the plotting (C) Importance of the features (D) General layout of the chain lines

Last Answer : (D) General layout of the chain lines

Cross hairs in surveying telescopes, are fitted (A) In the objective glass (B) At the centre of the telescope (C) At the optical centre of the eye piece (D) In front of the eye piece

Description : Cross hairs in surveying telescopes, are fitted (A) In the objective glass (B) At the centre of the telescope (C) At the optical centre of the eye piece (D) In front of the eye piece

Last Answer : (D) In front of the eye piece

The additional lines which are measured to show the correctness of the chain surveying are called: (A) Check clines (B) Proof lines (C) Tie lines (D) All of these

Description : The additional lines which are measured to show the correctness of the chain surveying are called: (A) Check clines (B) Proof lines (C) Tie lines (D) All of these

Last Answer : (D) All of these

Pick up the method of surveying in which field observations and plotting proceed simultaneously from the following (A) Chain surveying (B) Compass surveying (C) Plan table surveying (D) Tacheometric surveying

Description : Pick up the method of surveying in which field observations and plotting proceed simultaneously from the following (A) Chain surveying (B) Compass surveying (C) Plan table surveying (D) Tacheometric surveying

Last Answer : (C) Plan table surveying

The distances AC and BC are measured from two fixed points A and B whose distance AB is known. The point C is plotted by intersection. This method is generally adopted in (A) Chain surveying (B) Traverse method of surveys (C) Triangulation (D) None of these

Description : The distances AC and BC are measured from two fixed points A and B whose distance AB is known. The point C is plotted by intersection. This method is generally adopted in (A) Chain surveying (B) Traverse method of surveys (C) Triangulation (D) None of these

Last Answer : (A) Chain surveying

The method generally preferred to for contouring an undulating area, is (A) Chain surveying (B) Plane table surveying (C) Tacheometrical surveying (D) Compass surveying

Description : The method generally preferred to for contouring an undulating area, is (A) Chain surveying (B) Plane table surveying (C) Tacheometrical surveying (D) Compass surveying

Last Answer : (C) Tacheometrical surveying

While surveying a plot of land by plane tabling, the field observations (A) And plotting proceed simultaneously (B) And plotting do not proceed simultaneously (C) And recorded in field books to be plotted later (D) All the above

Description : While surveying a plot of land by plane tabling, the field observations (A) And plotting proceed simultaneously (B) And plotting do not proceed simultaneously (C) And recorded in field books to be plotted later (D) All the above

Last Answer : (A) And plotting proceed simultaneously

Prolongation of chain line across an obstruction in chain surveying, is done by (A) Making angular measurements (B) Drawing perpendiculars with a chain (C) Solution of triangles (D) All the above

Description : Prolongation of chain line across an obstruction in chain surveying, is done by (A) Making angular measurements (B) Drawing perpendiculars with a chain (C) Solution of triangles (D) All the above

Last Answer : (B) Drawing perpendiculars with a chain

The branch of surveying in which both horizontal and vertical positions of a point, are determined by making instrumental observations, is known (A) Tacheometry (B) Tachemetry (C) Telemetry (D) All the above

Description : The branch of surveying in which both horizontal and vertical positions of a point, are determined by making instrumental observations, is known (A) Tacheometry (B) Tachemetry (C) Telemetry (D) All the above

Last Answer : (D) All the above

Which of the following methods of plane table surveying is used to locate the position of an inaccessible point? (A) Radiation (B) Intersection (C) Traversing (D) Resection

Description : Which of the following methods of plane table surveying is used to locate the position of an inaccessible point? (A) Radiation (B) Intersection (C) Traversing (D) Resection

Last Answer : (B) Intersection

Chain surveying is well adopted for (A) Small areas in open ground (B) Small areas with crowded details (C) Large areas with simple details (D) Large areas with difficult details

Description : Chain surveying is well adopted for (A) Small areas in open ground (B) Small areas with crowded details (C) Large areas with simple details (D) Large areas with difficult details

Last Answer : (A) Small areas in open ground

In a solution of the three-point problem in plane table surveying, the converging of error is attained through : (a) Concyclic concept (b) Bessel’s method (c) Triangle of error (d) Tracing paper method

Description : In a solution of the three-point problem in plane table surveying, the converging of error is attained through : (a) Concyclic concept (b) Bessel’s method (c) Triangle of error (d) Tracing paper method

Last Answer : (c) Triangle of error

A fountain pen works on the principle of (1) Flow of liquids from higher to lower potential (2) Capillary action (3) Bernoulli's principle (4) Viscosity of liquids

Description : A fountain pen works on the principle of (1) Flow of liquids from higher to lower potential (2) Capillary action (3) Bernoulli's principle (4) Viscosity of liquids

Last Answer : (2) Capillary action Explanation: A fountain pen is a nib pen that, unlike its predecessor the dip pen, contains an internal reservoir of water-based liquid ink. The pen draws ink from the ... to flow in narrow spaces without the assistance of, and in opposition to external forces like gravity.

A fountain pen works on the principle of (1) flow of liquids from higher to lower potential (2) capillary action (3) Bernoulli’s principle (4) Viscosity of liquids

Description : A fountain pen works on the principle of (1) flow of liquids from higher to lower potential (2) capillary action (3) Bernoulli’s principle (4) Viscosity of liquids

Last Answer : capillary action

How does surveying work?

Description : How does surveying work?

Last Answer : I suspect it has more to do with trigonometry and triangulation, but I’m not a surveyor.

What is a compiler? A) A compiler does a conversion line by line as the program is run B) A compiler converts the whole of a higher level program code into machine code in one step C) A compiler is a general purpose language providing very efficient execution D) None of the above

Description : What is a compiler? A) A compiler does a conversion line by line as the program is run B) A compiler converts the whole of a higher level program code into machine code in one step C) A compiler is a general purpose language providing very efficient execution D) None of the above

Last Answer : Answer : B

It is the amount or amounts set by the auditor at less than materiality for the financial statements as a whole to reduce to an appropriately low level the probability that the aggregate of uncorrected and undetected misstatements exceeds materiality for the financial statements as a whole. a. Lower materiality b. Lesser materiality c. Performance materiality d. Materiality

Description : It is the amount or amounts set by the auditor at less than materiality for the financial statements as a whole to reduce to an appropriately low level the probability that the aggregate of ... as a whole. a. Lower materiality b. Lesser materiality c. Performance materiality d. Materiality

Last Answer : Performance materiality

The main importance of ARM micro-processors is providing operation with ______ A. Low cost and low power consumption B. Higher degree of multi-tasking C. Lower error or glitches D. Efficient memory management

Description : The main importance of ARM micro-processors is providing operation with ______ A. Low cost and low power consumption B. Higher degree of multi-tasking C. Lower error or glitches D. Efficient memory management

Last Answer : A. Low cost and low power consumption 

A use computer to automatically generate process plans is? a.Lower-level strategies b.Intermediate strategies c.Higher-level strategies d.Morden-level strategies

Description : A use computer to automatically generate process plans is? a.Lower-level strategies b.Intermediate strategies c.Higher-level strategies d.Morden-level strategies

Last Answer : c.Higher-level strategies

Use computers for storage and retrieval of the data for the process plans are? a.Lower-level strategies b.Intermediate strategies c.Higher-level strategies d.Morden-level strategies

Description : Use computers for storage and retrieval of the data for the process plans are? a.Lower-level strategies b.Intermediate strategies c.Higher-level strategies d.Morden-level strategies

Last Answer : a.Lower-level strategies

The compressor performance at higher altitude compare to sea level will be A. Same B. Higher C. Lower D. Unpredictable

Description : The compressor performance at higher altitude compare to sea level will be A. Same B. Higher C. Lower D. Unpredictable

Last Answer : ANSWER : C

In Need Hierarchy Theory of Abraham H. Maslow, Self Actualisation needs are at level– (A) Lower level needs (B) Middle level needs (C) Higher level needs (D) Highest level needs

Description : In Need Hierarchy Theory of Abraham H. Maslow, Self Actualisation needs are at level– (A) Lower level needs (B) Middle level needs (C) Higher level needs (D) Highest level needs

Last Answer : Answer: Lower level needs

An indiference curve measures ______ level of satisfaction derived from different combinations of commodity X and Y. (1) same (2) higher (3) lower (4) minimum

Description : An indiference curve measures ______ level of satisfaction derived from different combinations of commodity X and Y. (1) same (2) higher (3) lower (4) minimum

Last Answer : (1) same Explanation: An indifference curve may be defined as the locus of points, each representing a different combination of two substitute goods, which yield the same utility or level of ... is indifferent between any two combinations of goods when it comes to making a choice between them.

Pegging up of a currency means, fixing the value of a currency - (1) at a constant level (2) at a lower level (3) at a higher level (4) leaving it to market forces

Description : Pegging up of a currency means, fixing the value of a currency - (1) at a constant level (2) at a lower level (3) at a higher level (4) leaving it to market forces

Last Answer : (1) at a constant level Explanation: Currency pegging is the idea of fixing the exchange rate of a currency by matching its value to the value of another single currency or to a basket of other ... the value of a currency, with respect to the .currency or the other valuable it is pegged to.

After studying and evaluating a client's existing internal control, an auditor has concluded that the policies and procedures are well-designed and functioning as intended. Under these circumstances, the auditor would most likely a. Perform further control tests to the extent outlined in the audit program. b. Determine the control policies and procedures that should prevent or detect errors and fraud. c. Set detection risk at a higher level than would be set under conditions of weak internal control. d. Set detection risk at a lower level than would be set under conditions of weak internal control.

Description : After studying and evaluating a client's existing internal control, an auditor has concluded that the policies and procedures are well-designed and functioning as intended. Under these circumstances, the ... risk at a lower level than would be set under conditions of weak internal control.

Last Answer : Set detection risk at a higher level than would be set under conditions of weak internal control.

Redundancy has to be implemented at the _________ architectural level for effective results in cloud computing. a) lower b) higher c) middle d) all of the mentioned

Description : Redundancy has to be implemented at the _________ architectural level for effective results in cloud computing. a) lower b) higher c) middle d) all of the mentioned

Last Answer : higher

Weld decay can be minimized by specifying steel with: a) Higher carbon level b) higher chromium level c) lower carbon level d) lower chromium level

Description : Weld decay can be minimized by specifying steel with: a) Higher carbon level b) higher chromium level c) lower carbon level d) lower chromium level

Last Answer : c) lower carbon level

The automation level a. causes you to require more manpower with higher ratings. b. causes you to require more manpower with lower ratings. c. causes you to require less manpower with higher ratings. d. causes you to require less manpower with lower ratings. e. both b and c.

Description : The automation level a. causes you to require more manpower with higher ratings. b. causes you to require more manpower with lower ratings. c. causes you to require less manpower with higher ratings. d. causes you to require less manpower with lower ratings. e. both b and c.

Last Answer : e. both b and c.

Higher level of floods and droughts are led by A. sand storms B. lower precipitation C. higher precipitation D. none of the above

Description : Higher level of floods and droughts are led by A. sand storms B. lower precipitation C. higher precipitation D. none of the above

Last Answer : C. higher precipitation

Higher level of floods and droughts are led by A. sand storms B. lower precipitation C. higher precipitation D. none of the above

Description : Higher level of floods and droughts are led by A. sand storms B. lower precipitation C. higher precipitation D. none of the above

Last Answer : C. higher precipitation

Higher level of floods and droughts are led by A. sand storms B. lower precipitation C. higher precipitation D. none of the above

Description : Higher level of floods and droughts are led by A. sand storms B. lower precipitation C. higher precipitation D. none of the above

Last Answer : C. higher precipitation

In spinal anaesthesia the segmental level of: A. Sympathetic block is lower than the sensory block B. Sympathetic block is higher than the sensory block C. Motor block is higher than the sensory block D. Sympathetic, motor and sensory block has the same level

Description : In spinal anaesthesia the segmental level of: A. Sympathetic block is lower than the sensory block B. Sympathetic block is higher than the sensory block C. Motor block is higher than the sensory block D. Sympathetic, motor and sensory block has the same level

Last Answer : B. Sympathetic block is higher than the sensory block

In a positive logic system, logic state 1 corresponds to (A) positive voltage (B) higher voltage level (C) zero voltage level (D) lower voltage level

Description : In a positive logic system, logic state 1 corresponds to (A) positive voltage (B) higher voltage level (C) zero voltage level (D) lower voltage level

Last Answer : (B) higher voltage level We decide two voltages levels for positive digital logic. Higher voltage represents logic 1 & a lower voltage represents logic 0.

When a subordinate or lower level manager passes information or offers suggestions to higher level management, they're using which level of communication? (a) Upward communication ; (b) Downward communication ; (c) Lateral communication (d) Diagonal communication

Description : When a subordinate or lower level manager passes information or offers suggestions to higher level management, they're using which level of communication? (a) Upward communication ; (b) Downward communication ; (c) Lateral communication (d) Diagonal communication

Last Answer : (a) Upward communication ;

The vertical flow of communication from lower level to one or more higher levels is _____________. (a) Upward communication ; (b) Downward communication ; (c) Formal Communication (d) Horizontal communication

Description : The vertical flow of communication from lower level to one or more higher levels is _____________. (a) Upward communication ; (b) Downward communication ; (c) Formal Communication (d) Horizontal communication 

Last Answer : (a) Upward communication ;