Description : What are the drivers of Material Costs? a. Higher performance b. Smaller size c. Higher Mean Time Between Failure (MTBF) d. All of the above e. None of the above
Last Answer : d. All of the above
Description : _____________is a feature of an operating system that allows a computer to compensate for shortages of physical memory by temporarily transferring pages of data from RAM to disk storage. A. Flash memory B. Virtual memory C. Buffer D. None of the Above
Last Answer : B. Virtual memory
Description : n Capstone® a. the terms age and perceived age are not used interchangeably. b. the term MTBF means multiple transient business format. c. the terms age and perceived age are used interchangeably. d. all products will eventually have to be retired. e. none of the above.
Last Answer : c. the terms age and perceived age are used interchangeably.
Description : A directly accessible appointment calendar is feature of a “ resident package a. CPU b. Memory c. Buffer d. ALU
Last Answer : Memory
Description : A directly accessible appointment calendar is feature of a … resident package a. CPU b. Memory c. Buffer d. ALU
Last Answer : b. Memory
Description : If a new device is attached to a computer,such as a printer or scanner, its....... must be installed before the device can be used. 1) Buffer 2) Driver 3) Pager 4) Server
Last Answer : 2) Driver
Description : A computer has very low failure rate because it uses electronic components. It produces very consistent results. This is highlighted by which of the feature of computer? A) Accuracy B) Reliability C) Versatility D) Automatic
Last Answer : Answer : B
Description : A server crashes on the average once in 30 days, that is, the Mean Time Between Failures (MTBF) is 30 days. When this happens, it takes 12 hours to reboot it, that is, the Mean Time to Repair (MTTR) is 12 ... these reliability data values is approximately: (A) 96.3% (B) 97.3% (C) 98.3% (D) 99.3%
Last Answer : (C) 98.3%
Description : A partial denture that seats on the master cast but fails to seat correctly in the mouth is a result of, A. Contraction of the metal framework during casting B. Insufficient expansion of the investment material C. Distortion of impression D. Failure to block out unwanted undercuts
Last Answer : C. Distortion of impression
Description : Which statement is false about WR signal: a. WR signal controls the input buffer b. The bar over WR means that this is an active low signal c. The bar over WR means that this is an active high signal d. If WR is 0 then the input data reaches the latch input
Last Answer : c. The bar over WR means that this is an active high signal
Description : Do Freehand Mx have a "dynamic textbox" feature like... in Master Pages?
Last Answer : I’ve been asking around, and people who works in print told me that freehand DOES NOT have that feature. period. (thats what they said)
Description : Firefox (remmeber password or Master Pw feature) Safe from hackers?
Last Answer : answer:Unplug your phone cable. Done that? Now you're safe. It's unlikely that someone will specifically pick on you to get your password. But sure, if someone found your master password and had access to ... 't be that paranoid, surely, I hope all goes well though and that you never get hacked :)
Description : ECE Board Exam March 1996 The number of voice band channels in master group per CCITT standard is __________. A. 300 B. 480 C. 600 D. 12
Last Answer : A. 300
Description : R&D completion time can be diminished a. by repositioning a product. b. the more a company changes a product’s MTBF. c. when several products are put into R&D at the same time. d. when a company takes advantage of existing technology. e. none of the above.
Last Answer : d. when a company takes advantage of existing technology.
Description : What is MTTR, MTBF?
Last Answer : MTTR: Mean Time To Repair, basically average time taken in attending a breakdown. MTTR = Total breakdown hours/No. of breakdown MTBF: Mean Time Between Failures, basically average time between two failures MTBF = (available time – breakdown time)/ No. of breakdown
Description : In the December customer survey, a product would not receive a perfect score of 100 if a. it was priced at the bottom of the expected range. b. it was perfectly positioned. c. it had an MTBF at the middle of the expected range. d. it had 100% awareness. e. it had ideal age for segment.
Last Answer : c. it had an MTBF at the middle of the expected range.
Description : Labor costs are driven by three factors: a. wage and benefit rates, automation levels, and MTBF. b. wage and benefit rates, positioning, and second shift. c. wage and benefit rates, second ... , automation levels, and second shift. e. wage and benefit rates, second shift, and material costs.
Last Answer : d. wage and benefit rates, automation levels, and second shift.
Description : How much does it cost for MTBF per 1,000 hours of reliability? a. $0.50 b. $0.40 c. $0.30 d. $0.20 e. $0.10
Last Answer : c. $0.30
Description : A new unit of capacity costs $6 for the floor space plus $4 times a. hourly wage. b. automation rating. c. unit cost. d. MTBF. e. $0.65.
Last Answer : b. automation rating.
Description : What is the most important criteria to a “Size Segment” customer? a. Positioning b. Price c. Age d. MTBF e. Performance
Last Answer : a. Positioning
Description : What is the most important criteria to a “High End Segment” customer? a. Positioning b. Performance c. Price d. Age e. MTBF
Description : What is the most important criteria to a “Traditional Segment” consumer? a. Price b. MTBF c. Positioning d. Age e. Performance
Last Answer : d. Age
Description : Combining size and performance creates a product attribute known as a. MTBF. b. consumer perception. c. positioning. d. physical perception. e. a completed electric sensor.
Last Answer : c. positioning.
Description : The customer survey score is driven by a. market share. b. price. c. 4P’s. d. price and market share. e. perceptual map, MTBF and price.
Last Answer : c. 4P’s.
Description : In forecasting, it is not likely that you will take half of the sales unless a. the product positioning is ideal. b. the product meets the top 2 buying criteria and the price is low. c. the positioning ... d. the price is at the low end of the range and the positioning, age and MTBF are superior.
Last Answer : d. the price is at the low end of the range and the positioning, age and MTBF are superior.
Description : The reliability component cost of a product with a 17,000 hour MTBF rating is: a. $5.10. b. $17.00. c. $51.00. d. $170. e. cost cannot be determined with information given.
Last Answer : a. $5.10.
Description : All of the following are direct implications of hiring a second shift except: a. increased production capacity. b. paying higher wages to second shift. c. training costs. d. increased MTBF. e. recruitment costs.
Last Answer : d. increased MTBF.
Description : Changing MTBF will: a. have no impact on Perceived Age. b. increase Perceived Age. c. decrease Perceived Age. d. change Perceived Age. e. is undetermined.
Last Answer : a. have no impact on Perceived Age.
Description : The relative cost of a product’s material cost increases as: a. size is increased. b. performance is decreased. c. MTBF is raised. d. automation stays the same. e. all of the above.
Last Answer : c. MTBF is raised.
Description : If you are marketing to High End customers, which criteria are most important to them in order of importance? a. Positioning, Age, Price, MTBF b. Price, Age, MTBF, Positioning c. Age, Price, Positioning, MTBF d. MTBF, Positioning, Age, Price e. Positioning, Age, MTBF, Price
Last Answer : e. Positioning, Age, MTBF, Price
Description : What is the most important criterion to a “Low End Segment” customer? a. Price b. Age c. MTBF d. Positioning e. Performance
Last Answer : a. Price
Description : The top two buying criteria for each segment is: a. Positioning for low end and Price for high end. b. Reliability for low end and Performance for high end. c. Price for low end and Performance ... Price for low end and Positioning for high end. e. Positioning for low end and MTBF for high end.
Last Answer : d. Price for low end and Positioning for high end.
Description : ncreasing a product’s reliability will result in which of the following changes to production costs? a. Lower material cost b. Higher material cost c. Higher labor costs d. Lower labor costs e. Reducing MTBF has no effect on costs of production
Last Answer : b. Higher material cost
Description : MTBF in the segments should be a. MTBF (Performance) > MTBF (High End). b. MTBF (Low End) > MTBF (High End). c. MTBF (Low End) < MTBF (Size). d. a, b, and c. e. only a and c.
Last Answer : e. only a and c.
Description : MTBF is measured in a. day increments. b. hour increments. c. minute increments. d. 30-minute increments. e. 15-minute increments.
Last Answer : b. hour increments.
Description : What is one way to lower material costs? a. decrease MTBF b. increase capacity c. increase automation d. none of the above
Last Answer : a. decrease MTBF
Description : Which of the following statements about head injury and concomitant hyponatremia are true? A. There are no primary alterations in cardiovascular signs. B. Signs of increased intracranial pressure may be ... central pontine injury. E. This patient is best treated by restriction of water intake.
Last Answer : Answer: A DISCUSSION: Acute symptomatic hyponatremia is characterized by central nervous system signs of increased intracranial pressure. Changes in blood pressure and pulse are secondary to ... lead to central pontine myelinolysis. Oliguric renal failure may rapidly develop in severe hyponatremia
Description : A patient of acute myocardial infarction being treated in intensive care unit developed left ventricular failure with raised central venous pressure. It was decided to use glyceryl trinitrate. Which route/ ... (a) Sublingual (b) Oral (c) Intravenous bolus injection (d) Slow intravenous infusion
Last Answer : Ans: D
Description : Which of the following is associated with Hyperuricaemia? 1) is usually due to an excess purine consumption 2) occurs in association with acute lymphoblastic leukaemia 3) in primary gout is inherited in ... with low dose aspirin therapy 5) can be treated with uricosuric drugs even in renal failure
Last Answer : Answers-2 Hyperuricaemia may be due to increased purine intake, urate production or reduced urate clearance, and is most commonly due to the latter. Therefore it can occur in association with enhanced ... . Many of the uricosuric drugs may be detrimental in renal failure and may not be effective.
Description : Anna Wren, sales manager for Nordic Lumber, tells the firm's inventory manager that failure to have adequate supplies of pressure -treated lumber on hand has cost the firm £175,000 in lost ... figures? A)Carrying costs B)Replenishment costs C)Stockout costs D)Safety stock costs E)Reorder costs
Last Answer : C)Stockout costs
Description : A patient of congestive heart failure was being treated with furosemide and digoxin. He developed urinary tract infection. Which of the following antimicrobials should be avoided: A. Ampicillin B. Gentamicin C. Norfloxacin D. Cotrimoxazole
Last Answer : B. Gentamicin
Description : A patient of acute myocardial infarction being treated in intensive care unit developed left ventricular failure with raised central venous pressure. It was decided to use glyceryl trinitrate. Which route ... suitable: A. Sublingual B. Oral C. Intravenous bolus injection D. Slow intravenous infusion
Last Answer : D. Slow intravenous infusion
Description : An important feature of maple syrup urine disease is (A) Patient can not be treated by dietary regulation (B) Without treatment death, of patient may occur by the end of second year of life (C) Blood levels of leucine, isoleucine and serine are increased (D) Excessive brain damage
Last Answer : Answer : D
Description : Plotter accuracy is measured in terms of repeatability and A) Buffer size B) Resolution C) Vertical dimensions D) Intelligence
Description : A storage area used to store data to a compensate for the difference in speed at which the different units can handle data is A) Memory B) Buffer C) Accumulator D) Address
Description : _________ is a type of non-volatile memory that erases data in units called blocks. A. Flash memory B. Virtual memory C. Buffer D. None of the Above
Last Answer : A. Flash memory
Description : _________ is the transfer of computer data from a temporary storage area to the computer’s permanent memory. A. Flash B. Virtual C. Buffer Flush D. None of the Above
Last Answer : C. Buffer Flush
Description : _________ is a data area shared by hardware devices or program processes that operate at different speeds or with different sets of priorities. A. Flash memory B. Virtual memory C. Buffer D. None of the Above
Last Answer : C. Buffer
Description : The transfer of data from a CPU to peripheral devices of computer is achieved through ________ A. Modem B. Interface C. Buffer D. I/O Ports
Last Answer : D. I/O Ports