The firing order of four stroke four cylinder engine is a. 1-2-3-4 b. 1-3-2-4 c. 1-3-4-2 d. 1-4-3-2

The firing order of four stroke four cylinder engine is
a. 1-2-3-4
b. 1-3-2-4
c. 1-3-4-2
d. 1-4-3-2
by

1 Answer

Answer :

c. 1-3-4-2
by

Related questions

Firing order of a six cylinder engine in which no two adjacent cylinder have power stroke is (a) 1 5 3 6 2 4 (b) 1 2 3 4 5 6 (c) 1 5 4 6 3 2 (d) 1 4 2 5 6 3

Description : Firing order of a six cylinder engine in which no two adjacent cylinder have power stroke is (a) 1 5 3 6 2 4 (b) 1 2 3 4 5 6 (c) 1 5 4 6 3 2 (d) 1 4 2 5 6 3

Last Answer : (a) 1 5 3 6 2 4

The most popular firing order in a 4-cylinder inline internal combustion engine is a. 1-2-3-4 b. 1-3-2-4 c. 1-3-4-2 d. 1-2-4-3

Description : The most popular firing order in a 4-cylinder inline internal combustion engine is a. 1-2-3-4 b. 1-3-2-4 c. 1-3-4-2 d. 1-2-4-3

Last Answer : ANSWER b. 1-3-4-2

Select firing order for 4 – Cylinder engine with justification.

Description : Select firing order for 4 – Cylinder engine with justification.

Last Answer : Firing orders for 4 cylinder engine: 1-3-4-2 The firing order must be considered on the basis of engine vibrations and engine cooling. Also the firing order affects the balancing of engine ... sufficient travel time to exhaust gases. So that development of high back pressure would be avoided. 

A two stroke engine has a speed of 750 rpm. A four stroke engine having an identical cylinder size runs at 1500 rpm. The theoretical output of the two stroke engine will (a) Be twice that of the four stroke engine (b) Be half that of the four stroke engine (c) Be the same as that of the four stoke (d) Depend upon whether it is a CI or SI engine

Description : A two stroke engine has a speed of 750 rpm. A four stroke engine having an identical cylinder size runs at 1500 rpm. The theoretical output of the two stroke engine will (a) Be twice that of the four stroke ... ) Be the same as that of the four stoke (d) Depend upon whether it is a CI or SI engine

Last Answer : Ans :c

State the common firing orders used in 4 cylinder engine.

Description : State the common firing orders used in 4 cylinder engine.

Last Answer : Firing order: The sequence in which the power impulses occur in an engine is called the firing order. Firing order for 4 cylinder engine.(Any one) 1-3-4-2 OR 1-2-4-3 OR 1-4-3-2 

Morse test is conducted on the engine to calculate the mechanical efficiency of A. single cylinder CI engine B. single cylinder SI engine C. only on two stroke engines D. multi cylinder engine

Description : Morse test is conducted on the engine to calculate the mechanical efficiency of A. single cylinder CI engine B. single cylinder SI engine C. only on two stroke engines D. multi cylinder engine

Last Answer : ANSWER : D

An engine working on air standard Otto cycle has a cylinder diameter of 10 cm and stroke length of 15 cm. The ratio of specific heats for air is 1.4. If the clearance volume is 196.3 cc and the heat supplied per kg of air per cycle is 1800 kJ/kg, then work output per cycle per kg of air is a. 879.1 kJ/ b. 890.2 kJ c. 895.3 kJ d. 973.5 kJ

Description : An engine working on air standard Otto cycle has a cylinder diameter of 10 cm and stroke length of 15 cm. The ratio of specific heats for air is 1.4. If the clearance volume is 196.3 cc and the heat supplied per kg of air per ... kg of air is a. 879.1 kJ/ b. 890.2 kJ c. 895.3 kJ d. 973.5 kJ

Last Answer : ANSWER d. 973.5 kJ

Scavenging air in diesel engine means a. air used for combustion under pressure b. forced air for cooling the cylinder c. burnt air containing products of combustion d. air used for forcing burnt gases out of the engines cylinder during the exhaust stroke

Description : Scavenging air in diesel engine means a. air used for combustion under pressure b. forced air for cooling the cylinder c. burnt air containing products of combustion d. air used for forcing burnt gases out of the engines cylinder during the exhaust stroke

Last Answer : ANSWER d. air used for forcing burnt gases out of the engines cylinder during the exhaust stroke

The pressure of steam in the engine cylinder at the beginning of the stroke is ________ the boiler pressure. (A) Equal to (B) Less than (C) Higher than (D) None of these

Description : The pressure of steam in the engine cylinder at the beginning of the stroke is ________ the boiler pressure. (A) Equal to (B) Less than (C) Higher than (D) None of these

Last Answer : (B) Less than

hen displacement volume is divided by piston displacement, what will we obtained (a) number of cylinders (b) number of power stroke per minute for all cylinders (c) number of revolution of the crankshaft (engine) (d) number of revolution of crankshaft × number of cylinder

Description : hen displacement volume is divided by piston displacement, what will we obtained (a) number of cylinders (b) number of power stroke per minute for all cylinders (c) number of revolution of the crankshaft (engine) (d) number of revolution of crankshaft × number of cylinder

Last Answer : (b) number of power stroke per minute for all cylinders

What is the firing order for 10pc-1 Isuzu engine?

Description : What is the firing order for 10pc-1 Isuzu engine?

Last Answer : Feel Free to Answer

In which step of the four-stroke engine cycle does the heat from the combustion reaction causes the pistons to move?

Description : In which step of the four-stroke engine cycle does the heat from the combustion reaction causes the pistons to move?

Last Answer : combustion and expansion

In four stroke engine which of the following is also known as power stroke a. Suction stroke b. Compression stroke c. Expansion stroke d. Exhaust stroke (Ans:c) Measurements of fuel and air consumption, brake power and incylinder pressure. Tutorials on engine performance parameters. Heat balance sheet. Engine performance curves. 1. The increase in intake air temperature into IC engine,___________its efficiency A. increase B. decrease C. does not alter D. unpredictable on

Description : In four stroke engine which of the following is also known as power stroke a. Suction stroke b. Compression stroke c. Expansion stroke d. Exhaust stroke (Ans:c) Measurements of fuel and air ... into IC engine,___________its efficiency A. increase B. decrease C. does not alter D. unpredictable on

Last Answer : ANSWER : B

In four stroke engine there is one power stroke in _____ of crankshaft rotation. a. 180° b. 360° c. 540° d. 720° (Ans:d)

Description : In four stroke engine there is one power stroke in _____ of crankshaft rotation. a. 180° b. 360° c. 540° d. 720° (Ans:d)

Last Answer : The ascending order of strokes in four stroke engine is a. Suction stroke - Expansion stroke - Compression stroke - Exhaust stroke b. Suction stroke - Compression stroke - Expansion stroke -Exhaust ... stroke d. Suction stroke - Compression stroke - Exhaust stroke - Expansion stroke (Ans:b)

Which of the following engine can work on very lean mixture a. Spark ignition engine b. compression ignition engine c. two stroke engine d. Four stroke engine

Description : Which of the following engine can work on very lean mixture a. Spark ignition engine b. compression ignition engine c. two stroke engine d. Four stroke engine

Last Answer : ANSWER b. compression ignition engine

The 'four stroke petrol engine' is based on – (1) Carnot-cycle (2) Otto-cycle (3) Diesel-cycle (4) Boyle's-cycle

Description : The 'four stroke petrol engine' is based on – (1) Carnot-cycle (2) Otto-cycle (3) Diesel-cycle (4) Boyle's-cycle

Last Answer : (2) Otto-cycle Explanation: A four-stroke engine (also known as four-cycle) is an internal combustion n engine in which the piston completes four separate strokes—intake, compression, power, and exhaust—during two separate revolutions of the engine's crankshaft, and one single thermodynamic cycle.

Why consumption of lubricating oil is more in two-stroke cycle petrol engine than four-stroke cycle petrol engine ?

Description : Why consumption of lubricating oil is more in two-stroke cycle petrol engine than four-stroke cycle petrol engine ?

Last Answer : In two-stroke engine lub oil is mixed with petrol and thus some lub oil is blown out through the exhaust valves by scavenging and charging air. There is no such wastage in four stroke petrol engine.

For four stroke engine, work done/cycle is (where T m is the mean torque) (A) πT m (B) 2πT m (C) 3πT m (D) 4πT m

Description : For four stroke engine, work done/cycle is (where T m is the mean torque) (A) πT m (B) 2πT m (C) 3πT m (D) 4πT m

Last Answer : (D) 4πT m

Pick out the wrong statement (A) Low ozone layer thickness in polar regions is due to cold climatic conditions (B) Amount of unburnt hydrocarbons emitted by two stroke petrol engine is more as compared to that emitted by a four stroke engine (C) Carbon monoxide present in the two stroke petrol engine exhaust is much less as compared to that emitted from a four stroke engine (D) Mercury as a pollutant can enter the blood stream & the digestive system/ lungs and is responsible for causing Minamata disease

Description : Pick out the wrong statement (A) Low ozone layer thickness in polar regions is due to cold climatic conditions (B) Amount of unburnt hydrocarbons emitted by two stroke petrol engine is more ... can enter the blood stream & the digestive system/ lungs and is responsible for causing Minamata disease

Last Answer : (D) Mercury as a pollutant can enter the blood stream & the digestive system/ lungs and is responsible for causing Minamata disease

in four stroke engine there is one power stroke for every revolutions' of the cranks shaft a. 1 b. 2 c. 3 d.4

Description : in four stroke engine there is one power stroke for every revolutions' of the cranks shaft a. 1 b. 2 c. 3 d.4

Last Answer : ans b

Executes the entire cycle in just two strokes the power stroke and the compression stroke.  a. One-stroke engine  b. Two-stroke engine  c. Four-stroke engine  d. Eight-stroke engine

Description : Executes the entire cycle in just two strokes the power stroke and the compression stroke.  a. One-stroke engine  b. Two-stroke engine  c. Four-stroke engine  d. Eight-stroke engine

Last Answer : Two-stroke engine

In a four stroke I.C engine completing 3000rpm the natural frequency of vibration of the exhaust valve should be a. 1200 Hz b. 1000 Hz c. 600 Hz d. 120 Hz

Description : In a four stroke I.C engine completing 3000rpm the natural frequency of vibration of the exhaust valve should be a. 1200 Hz b. 1000 Hz c. 600 Hz d. 120 Hz

Last Answer : b. 1000 Hz

Connecting rod of four stroke engine is subjected to A. Compressive load B. Tensile load C. Both compressive and tensile load D. None of the above

Description : Connecting rod of four stroke engine is subjected to A. Compressive load B. Tensile load C. Both compressive and tensile load D. None of the above

Last Answer : C. Both compressive and tensile load

Describe procedure to adjust valve clearance of four stroke engine of two wheeler with necessary sketches.

Description : Describe procedure to adjust valve clearance of four stroke engine of two wheeler with necessary sketches.

Last Answer : Procedure: 1) Remove the valve cover according to your shop manual's instructions. Don't try to hammer a screwdriver or chisel between the valve cover and the head. You will ruin the gasket surface in a ... When the clearance feels good, hold the adjusting screw, and tighten up the lock nut. 

Describe working principle of four stroke diesel engine with the help of sketches.

Description : Describe working principle of four stroke diesel engine with the help of sketches.

Last Answer : Suction stroke: During this stroke, inlet valve is open and exhaust valve is closed. The piston moves from TDC to BDC and crank shaft rotates through 180˚. The downward movement of ... the burnt gases outside the combustion chamber. Crankshaft rotates by two complete revolutions through 720. 

Write the specifications of I.C. engine used in a two wheeler four stroke vehicle.

Description : Write the specifications of I.C. engine used in a two wheeler four stroke vehicle.

Last Answer : Engine specifications for two wheeler 1. Engine of Bajaj Discover 125 ST - Air-cooled, 4-stroke 124.6 cc engine - Maximum power of 12.8 Bhp at 9000 rpm - Maximum torque of 11 Nm at 7000 rpm OR 2. Honda Livo a) BS- ... rpm. d) Bore x Stroke - 50 x 55.6 mm e) C R - 9.9 : 1, Max Speed - 86KMPH

Describe the working of four stroke C. I. engine with neat sketch.

Description : Describe the working of four stroke C. I. engine with neat sketch. 

Last Answer : Working principle of CI engine: 1. Suction stroke: During this stroke, inlet valve is open and exhaust valve is closed. Only air is sucked into cylinder during this stroke. The ... burnt gases outside the combustion chamber. Crankshaft rotates by two complete revolutions through 720˚. 

The ‘four stroke petrol engine’ is based on (1) Carnot-cycle (2) Otto-cycle (3) Diesel-cycle (4) Boyle’s-cycle

Description : The ‘four stroke petrol engine’ is based on (1) Carnot-cycle (2) Otto-cycle (3) Diesel-cycle (4) Boyle’s-cycle

Last Answer : Otto-cycle

Fuel is injected into the cylinder at the end of ______________ stroke. a) suction b) compression c) expansion d) exhaust

Description : Fuel is injected into the cylinder at the end of ______________ stroke. a) suction b) compression c) expansion d) exhaust

Last Answer : Answer: b Explanation: Fuel is injected into the cylinder at the end of compression stroke and not at suction or expansion stroke.

Which of the following parameters are not required for evaluating volumetric efficiency of the compressor? a) Power b) Cylinder bore diameter c) Stroke length d) FAD

Description : Which of the following parameters are not required for evaluating volumetric efficiency of the compressor? a) Power b) Cylinder bore diameter c) Stroke length d) FAD

Last Answer : a) Power

Explain the procedure of Morse Test” to be conducted for four cylinder petrol engine.

Description : Explain the procedure of Morse Test” to be conducted for four cylinder petrol engine. 

Last Answer : Morse Test: Used for multi cylinder engines Procedure: 1. The engine is run at the required speed and the torque is measured. 2. One cylinder is cut out by shorting the plug if an S.I. engine is under test. 3. ... -B4 Total IP of Engine = I1+I2+I3+I4 Friction Power F.P. = I.P - B.P

The maximum temperature in the I.C engine cylinder is of the order of a. 500 – 1000 C b. 1000 – 1500 C c. 1500 – 2000 C d. 2000 – 2500 C

Description : The maximum temperature in the I.C engine cylinder is of the order of a. 500 – 1000 C b. 1000 – 1500 C c. 1500 – 2000 C d. 2000 – 2500 C

Last Answer : ANSWER d. 2000 – 2500 C

The piston of a steam engine moves in S.H.M. The crank rotates at 180 r.p.m. and the stroke length is 2 metres. The linear velocity of the piston when it is at a distance of 1 metre from the centre is a.8.88 m/sec b.16.32 m/sec c.5.88 m/sec d.8.16 m/sec e.Zero

Description : The piston of a steam engine moves in S.H.M. The crank rotates at 180 r.p.m. and the stroke length is 2 metres. The linear velocity of the piston when it is at a distance of 1 metre from the centre is a.8.88 m/sec b.16.32 m/sec c.5.88 m/sec d.8.16 m/sec e.Zero

Last Answer : e. Zero

Oil for two-stroke engine

Description : Does anyone have experience with four-stroke oil in two strokes? One told me that he had taken a muscovy trainer and stirred it to Trabos, and drove the engine 57,000 km. And he never bought 2MT. And how they scared us that she made ash and abrasive carbon :-)

Last Answer : I wouldn't try it until today's two-strokes ...: o But it's a fact that the Trabants and Wartas rode a lot (and it stinked accordingly), after all - even a friend refueled in his S11 and refueled it with an indulo. ..: o I don't have my own experience - I took care of S11.

In two stroke engine one power occurs in _______ of crank rotation A. 180° B. 360° C. 270° D. 720°

Description : In two stroke engine one power occurs in _______ of crank rotation A. 180° B. 360° C. 270° D. 720°

Last Answer : ANSWER : B

The actual volume of fresh charge admitted in 4-stroke petrol engine is A. equal to stroke volume B. equal stroke volume and clearance volume C. less than stroke volume D. more than stroke volume

Description : The actual volume of fresh charge admitted in 4-stroke petrol engine is A. equal to stroke volume B. equal stroke volume and clearance volume C. less than stroke volume D. more than stroke volume

Last Answer : ANSWER : C

In a typical medium speed 4- stroke Diesel engine, the inlet valve A. opens 20°before top dead centre and closes at 35°afterthebottomdead centre. B. opens up at top dead centre and closes at bottomdead centre C. may open orcloseanywhere D. remains open for 200°

Description : In a typical medium speed 4- stroke Diesel engine, the inlet valve A. opens 20°before top dead centre and closes at 35°afterthebottomdead centre. B. opens up at top dead centre and closes at bottomdead centre C. may open orcloseanywhere D. remains open for 200°

Last Answer : ANSWER : A

In two stroke engine, which of the following functions are performed at the same time? a. Compression and exhaust b. Intake and Expansion c. Intake and exhaust d. Intake and compression (Ans:c)

Description : In two stroke engine, which of the following functions are performed at the same time? a. Compression and exhaust b. Intake and Expansion c. Intake and exhaust d. Intake and compression (Ans:c)

Last Answer : The compression ratio in a Compression Ignition (CI) engine is generally in between a. 8 to 13 b. 14 to 23 c. 20 to 28 d. 25 to 32 (Ans:b)

A gas engine has a volume of 300 cc and clearance volume of 25 cc. Its volumetric efficiency is 0.8 and mech efficiency is 0.9. What is the volume of the mixture taken in per stroke? (a) 248 cc (b) 252 cc (c) 264 cc (d) 286 cc

Description : A gas engine has a volume of 300 cc and clearance volume of 25 cc. Its volumetric efficiency is 0.8 and mech efficiency is 0.9. What is the volume of the mixture taken in per stroke? (a) 248 cc (b) 252 cc (c) 264 cc (d) 286 cc

Last Answer : Ans : c

For low load operation more economical engine is a. petrol engine b. diesel engine c. muticylinder engine d. two stroke engine

Description : For low load operation more economical engine is a. petrol engine b. diesel engine c. muticylinder engine d. two stroke engine

Last Answer : ANSWER b. diesel engine

The term scavenging is generally associated with a. 2-stroke engine b. 4-stroke engine c. high efficiency engine d. diesel engine

Description : The term scavenging is generally associated with a. 2-stroke engine b. 4-stroke engine c. high efficiency engine d. diesel engine

Last Answer : ANSWER C. high efficiency engine

The stroke of a heat engine in which outlet value opens is

Description : The stroke of a heat engine in which outlet value opens is

Last Answer : exhaust stroke

In the expansion stroke of a petrol engine, the piston is pushed with a great stroke. Why?

Description : In the expansion stroke of a petrol engine, the piston is pushed with a great stroke. Why?

Last Answer : When the petrol-air mixture is ignited, carbon dioxide, carbon monoxide and water vapour expands suddenly. This exerts a great force on the piston.

What is meant by stroke of an engine?

Description : What is meant by stroke of an engine?

Last Answer : The motion of piston from one end to another end is called stage/stroke of an engine.

Give reason: The wheel makes another half rotation after the expansion stroke of steam engine.

Description : Give reason: The wheel makes another half rotation after the expansion stroke of steam engine.

Last Answer : Due to inertia of the crankshaft, the wheel makes another half rotation and completes one cycle.

Give reason: After the expansion stroke of a steam engine, steam condenses into water.

Description : Give reason: After the expansion stroke of a steam engine, steam condenses into water.

Last Answer : As steam expands, it loses its kinetic energy and gets condensed into water.

For two stroke engine, work done/cycle is (where T m is the mean torque) (A) πT m (B) 2πT m (C) 3πT m (D) 4πT m

Description : For two stroke engine, work done/cycle is (where T m is the mean torque) (A) πT m (B) 2πT m (C) 3πT m (D) 4πT m

Last Answer : (B) 2πT m

The temperature produced on the power stroke of an engine can be as high as a) 1200°C b) 1400°C c) 1600°C d) 1800°C

Description : The temperature produced on the power stroke of an engine can be as high as a) 1200°C b) 1400°C c) 1600°C d) 1800°C

Last Answer : c) 1600°C

Connecting rod of two stroke engine is subjected to A. Compressive load B. Tensile load C. Both compressive and tensile load D. None of the above

Description : Connecting rod of two stroke engine is subjected to A. Compressive load B. Tensile load C. Both compressive and tensile load D. None of the above

Last Answer : A. Compressive load