For pipe flows, head is proportional to __________ at constant capacity(where, D = pipe diameter). (A) 1/D(B) 1/D2(C) 1/D5(D) D

For pipe flows, head is proportional to __________ at constant
capacity(where, D = pipe diameter).
(A) 1/D
(B) 1/D2
(C) 1/D5
(D) D
by

1 Answer

Answer :

(C) 1/D5
by

Related questions

At low Reynold's number, the power (P) required for agitating a fluid in a stirred tank becomes independent of inertial forces. In this limit, indicate which of the following relations is satisfied: Po = ρ/ρN3 D5 : Power number Re = ρ N D2 /μ: Reynold's number N is the impeller rotational speed, and D is the impeller diameter. (A) Po ∝ Re -1.0 (B) Po ∝ Re 0.0 (C) Po ∝ Re 0.5 (D) Po ∝ Re 1.0

Description : At low Reynold's number, the power (P) required for agitating a fluid in a stirred tank becomes independent of inertial forces. In this limit, indicate which of the following relations is satisfied: Po = ρ/ρN3 D5 : Power number Re = ρ N D2 ... Re -1.0 (B) Po ∝ Re 0.0 (C) Po ∝ Re 0.5 (D) Po ∝ Re 1.0

Last Answer : (B) Po ∝ Re 0.0 (C) Po ∝ Re 0.5

In a fully turbulent flow (Re > 10 5 ) in a pipe of diameter 'd', for a constant pressure gradient, the dependence of volumetric flow rate of an incompressible fluid is (A) d(B) d2(C) d2.5(D) d

Description : In a fully turbulent flow (Re > 10 5 ) in a pipe of diameter 'd', for a constant pressure gradient, the dependence of volumetric flow rate of an incompressible fluid is (A) d (B) d 2 (C) d 2.5 (D) d

Last Answer : (C) d 2.5

Power required to drive a ball mill with a particular ball load is proportional to (where, D = diameter of ball mill.) (A) D (B) 1/D (C) D2.5 (D) 1/D2.5

Description : Power required to drive a ball mill with a particular ball load is proportional to (where, D = diameter of ball mill.) (A) D (B) 1/D (C) D2.5 (D) 1/D2.5

Last Answer : (C) D2.5 (D) 1/D2

The specific surface of spherical particles is proportional to (where, Dp = diameter of particle). (A) D2 p (B) Dp (C) 1/Dp (D) 1/D2p

Description : The specific surface of spherical particles is proportional to (where, Dp = diameter of particle). (A) D2 p (B) Dp (C) 1/Dp (D) 1/D2p

Last Answer : (C) 1/Dp

A compound pipe of diameter d1, d2 and d3 having lengths l1, l2 and l3 is to be replaced by an equivalent pipe of uniform diameter d and of the same length (l) as that of the compound pipe. The size of the equivalent pipe is given by (A) l/d² = + + (B) l/d³ = + ) + (C) = + + (D)

Description : A compound pipe of diameter d1, d2 and d3 having lengths l1, l2 and l3 is to be replaced by an equivalent pipe of uniform diameter d and of the same length (l) as that of the compound pipe. The size of the equivalent pipe is given by (A) l/d² = + + (B) l/d³ = + ) + (C) = + + (D)

Last Answer : Answer: Option D

Consider a centrifugal pump having a specific impeller diameter, fixed impeller speed pumping a liquid of constant density at a particular discharge capacity. With decrease in the capacity of the pump, the __________ decreases. (A) NPSH required (B) BHP required by the pump (C) Head of the liquid pumped (D) All (A), (B) and (C)

Description : Consider a centrifugal pump having a specific impeller diameter, fixed impeller speed pumping a liquid of constant density at a particular discharge capacity. With decrease in the capacity of the pump, the __________ decreases. (A) ... the pump (C) Head of the liquid pumped (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

At a constant speed of the centrifugal pump, it’s __________ the impeller diameter. (A) Capacity varies directly with (B) Head varies as the square of (C) Horsepower varies as the cube of (D) All (A), (B) and (C)

Description : At a constant speed of the centrifugal pump, it’s __________ the impeller diameter. (A) Capacity varies directly with (B) Head varies as the square of (C) Horsepower varies as the cube of (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

In case of end to end connection of two or more pipes in series, the __________ each pipe.(A) Same rate of flow passes through (B) Head loss is same through (C) Rate of flow in each pipe is proportional to the length of (D) Total flow rate is the sum of flow rate in

Description : In case of end to end connection of two or more pipes in series, the __________ each pipe. (A) Same rate of flow passes through (B) Head loss is same through (C) Rate of flow in each pipe is proportional to the length of (D) Total flow rate is the sum of flow rate in

Last Answer : (A) Same rate of flow passes through

A fluid is flowing inside the inner tube of a double pipe heat exchanger with diameter 'd'. For a fixed mass flow rate, the tube side heat transfer co￾efficient for turbulent flow conditions is proportional to (A) d 0.8 (B) d -0.2 (C) d -1 (D) d -1.8

Description : A fluid is flowing inside the inner tube of a double pipe heat exchanger with diameter 'd'. For a fixed mass flow rate, the tube side heat transfer co￾efficient for turbulent flow conditions is proportional to (A) d 0.8 (B) d -0.2 (C) d -1 (D) d -1.8

Last Answer : (B) d -0.2

For laminar flow of Newtonian fluids through a circular pipe, for a given pressure drop and length & diameter of pipe, the velocity of fluid is proportional to (where, μ = fluid viscosity ) (A) μ (B) 1/μ (C) √μ (D) 1/√μ

Description : For laminar flow of Newtonian fluids through a circular pipe, for a given pressure drop and length & diameter of pipe, the velocity of fluid is proportional to (where, μ = fluid viscosity ) (A) μ (B) 1/μ (C) √μ (D) 1/√μ

Last Answer : (B) 1/μ

The pressure drop per unit length for laminar flow of fluid through a long pipe is proportional to (where, A = cross-sectional area of the pipe & D = Diameter of the pipe) (A) A (B) D (C) 1/A (D) 1/A2

Description : The pressure drop per unit length for laminar flow of fluid through a long pipe is proportional to (where, A = cross-sectional area of the pipe & D = Diameter of the pipe) (A) A (B) D (C) 1/A (D) 1/A2

Last Answer : (C) 1/A

According to the film theory of mass transfer, the mass transfer co￾efficient is proportional to (where, D = molecular diffusivity). (A) D (B) D2 (C) D0.5 (D) 1/D

Description : According to the film theory of mass transfer, the mass transfer co￾efficient is proportional to (where, D = molecular diffusivity). (A) D (B) D2 (C) D0.5 (D) 1/D

Last Answer : (A) D

The fluid velocity varies as the cube of the cylindrical pipe diameter in case of steady state laminar flow at constant pressure drop for __________ fluid. (A) Newtonian (B) Pseudo-plastic (C) Dilatent (D) Bingham plastic

Description : The fluid velocity varies as the cube of the cylindrical pipe diameter in case of steady state laminar flow at constant pressure drop for __________ fluid. (A) Newtonian (B) Pseudo-plastic (C) Dilatent (D) Bingham plastic

Last Answer : (B) Pseudo-plastic

The fluid velocity varies as the square of the cylindrical pipe diameter, in case of steady state laminar flow at constant pressure drop, for __________ fluid. (A) Newtonian (B) Dilatant (C) Pseudo-plastic (D) Non-Newtonian

Description : The fluid velocity varies as the square of the cylindrical pipe diameter, in case of steady state laminar flow at constant pressure drop, for __________ fluid. (A) Newtonian (B) Dilatant (C) Pseudo-plastic (D) Non-Newtonian

Last Answer : (A) Newtonian

The fluid velocity varies as the square root of the cylindrical pipe diameter in case of steady state laminar flow at constant pressure drop of __________ fluid. (A) Dilatent (B) Pseudo-plastic (C) Bingham plastic (D) Newtonian

Description : The fluid velocity varies as the square root of the cylindrical pipe diameter in case of steady state laminar flow at constant pressure drop of __________ fluid. (A) Dilatent (B) Pseudo-plastic (C) Bingham plastic (D) Newtonian

Last Answer : (A) Dilatent

With a constant diameter impeller of a centrifugal pump (A) Its capacity varies directly as the square of speed (B) Head varies as the square of speed (C) Horsepower input varies as the square of speed (D) Head varies as the speed

Description : With a constant diameter impeller of a centrifugal pump (A) Its capacity varies directly as the square of speed (B) Head varies as the square of speed (C) Horsepower input varies as the square of speed (D) Head varies as the speed

Last Answer : (B) Head varies as the square of speed

The head loss in turbulent flow in pipe is proportional to(where, V = velocity of fluid through the pipe) (A) V 2 (B) 1/V 2 (C) 1/V (D) V

Description : The head loss in turbulent flow in pipe is proportional to(where, V = velocity of fluid through the pipe) (A) V 2 (B) 1/V 2 (C) 1/V (D) V

Last Answer : (A) V

In case of laminar flow of fluid through a circular pipe, the (A) Shear stress over the cross-section is proportional to the distance from the surface of the pipe (B) Surface of velocity distribution is a paraboloid of revolution, whose volume equals half the volume of circumscribing cylinder (C) Velocity profile varies hyperbolically and the shear stress remains constant over the cross-section (D) Average flow occurs at a radial distance of 0.5 r from the centre of the pipe (r = pipe radius)

Description : In case of laminar flow of fluid through a circular pipe, the (A) Shear stress over the cross-section is proportional to the distance from the surface of the pipe (B) Surface of velocity distribution is a ... occurs at a radial distance of 0.5 r from the centre of the pipe (r = pipe radius)

Last Answer : (B) Surface of velocity distribution is a paraboloid of revolution, whose volume equals half the volume of circumscribing cylinder

Water flows through a horizontal pipe at a constant volumetric rate. At a location where the cross sectional area decreases, the velocity of the fluid: (1) increases (2) decreases (3) stays the same (4) none of the above

Description : Water flows through a horizontal pipe at a constant volumetric rate. At a location where the cross sectional area decreases, the velocity of the fluid: (1) increases (2) decreases (3) stays the same (4) none of the above

Last Answer : (1) increases

Water flows through a horizontal pipe at a constant volumetric rate. At a location where the cross sectional area decreases, the velocity of the fluid: w) increases x) decreases y) stays the same

Description : Water flows through a horizontal pipe at a constant volumetric rate. At a location where the cross sectional area decreases, the velocity of the fluid: w) increases x) decreases y) stays the same

Last Answer : ANSWER: W -- INCREASES 

rpm of a trommel at critical speed is given by (where, D = Diameter of trommel in ft) (A) 76.65/D (B) 76.65/√D (C) 76.65/D2 (D) 76.75 √D

Description : rpm of a trommel at critical speed is given by (where, D = Diameter of trommel in ft) (A) 76.65/D (B) 76.65/√D (C) 76.65/D2 (D) 76.75 √D

Last Answer : (B) 76.65/√D

For spheres, the surface shape factor is given by (where, A = area, V = volume, and D = diameter) (A) π = (A/D2 ) (B) π/6 = (V/D3 ) (C) AD/V (D) None of these

Description : For spheres, the surface shape factor is given by (where, A = area, V = volume, and D = diameter) (A) π = (A/D2 ) (B) π/6 = (V/D3 ) (C) AD/V (D) None of these

Last Answer : (A) π = (A/D2 )

The head loss in turbulent flow in a pipe varies (A) Directly as the velocity (B) Inversely as the square of the velocity (C) Approximately as the square of the velocity (D) Inversely as the square of the diameter

Description : The head loss in turbulent flow in a pipe varies (A) Directly as the velocity (B) Inversely as the square of the velocity (C) Approximately as the square of the velocity (D) Inversely as the square of the diameter

Last Answer : (C) Approximately as the square of the velocity

Which of the following two quantities when same, makes one pipe system equivalent to another pipe system? (A) Head & discharge(B) Length & discharge(C) Length & diameter(D) Friction factor & diameter

Description : Which of the following two quantities when same, makes one pipe system equivalent to another pipe system? (A) Head & discharge (B) Length & discharge (C) Length & diameter (D) Friction factor & diameter

Last Answer : (A) Head & discharge

The head loss in turbulent flow in a pipe varies (A) As velocity (B) As (velocity) 2 (C) Inversely as the square of diameter

Description : The head loss in turbulent flow in a pipe varies (A) As velocity (B) As (velocity) 2 (C) Inversely as the square of diameter

Last Answer : (B) As (velocity)

The head loss in turbulent flow in a pipe varies (A) As velocity (B) As (velocity) 2 (C) Inversely as the square of diameter

Description : The head loss in turbulent flow in a pipe varies (A) As velocity (B) As (velocity) 2 (C) Inversely as the square of diameter

Last Answer : (C) Inversely as the square of diameter

With increase in the ratio of orifice diameter to pipe diameter in case of an orificemeter, the overall pressure loss (A) Decreases (B) Increases (C) Remain constant (D) Increases linearly

Description : With increase in the ratio of orifice diameter to pipe diameter in case of an orificemeter, the overall pressure loss (A) Decreases (B) Increases (C) Remain constant (D) Increases linearly

Last Answer : (C) Remain constant

An example of unsteady non uniform flow is the flow of liquid under pressure through a (A) Tapering pipe at constant flow rate (B) Tapering pipe at either decreasing or increasing flow rate (C) Long pipeline of constant diameter (D) None of these

Description : An example of unsteady non uniform flow is the flow of liquid under pressure through a (A) Tapering pipe at constant flow rate (B) Tapering pipe at either decreasing or increasing flow rate (C) Long pipeline of constant diameter (D) None of these

Last Answer : (B) Tapering pipe at either decreasing or increasing flow rate

The suction pipe diameter of refrigerating unit compressor in comparison to delivery side is (a) bigger (b) smaller (c) equal (d) smaller/bigger depending on capacity

Description : The suction pipe diameter of refrigerating unit compressor in comparison to delivery side is (a) bigger (b) smaller (c) equal (d) smaller/bigger depending on capacity

Last Answer : Ans: a

The torque transmitted by a hollow shaft of outer diameter (D) and inner diameter (d) (a)π/4fs(D2-d2)/D (b) π/4fs(D3-d3)/D (c) π/4fs(D4-d4)/D (d) π/4fs(D4-d4)/D

Description : The torque transmitted by a hollow shaft of outer diameter (D) and inner diameter (d) (a)π/4fs(D2-d2)/D (b) π/4fs(D3-d3)/D (c) π/4fs(D4-d4)/D (d) π/4fs(D4-d4)/D

Last Answer : (c) π/4fs(D4-d4)/D

For the non catalytic reaction of particles with surrounding fluid, the same needed to achieve the same fractional conversion for particles of different unchanging sizes is proportional to the particle diameter, when the __________ is the controlling resistance. (A) Film diffusion (B) Diffusion through ash layer (C) Chemical reaction (D) Either (A), (B) or (C)

Description : For the non catalytic reaction of particles with surrounding fluid, the same needed to achieve the same fractional conversion for particles of different unchanging sizes is proportional to the particle diameter, when the ... through ash layer (C) Chemical reaction (D) Either (A), (B) or (C)

Last Answer : (C) Chemical reaction

For the non-catalytic reaction of particles with surrounding fluid, the time needed to achieve the same fractional conversion for particles of different but unchanging sizes is proportional to the square of particle diameter, when the __________ is the controlling resistance. (A) Film diffusion (B) Diffusion through ash layer (C) Chemical reaction (D) Either (A), (B) or (C)

Description : For the non-catalytic reaction of particles with surrounding fluid, the time needed to achieve the same fractional conversion for particles of different but unchanging sizes is proportional to the square of particle diameter, ... through ash layer (C) Chemical reaction (D) Either (A), (B) or (C)

Last Answer : (B) Diffusion through ash layer

A liquid flows through a capillary tube. Then the velocity of the liquid is (a) Maximum at the walls of the tubs (b) Constant at all points in the cross section of the tube (c) Maximum along the axis of the tube (d) Independent of the pressure-head

Description : A liquid flows through a capillary tube. Then the velocity of the liquid is (a) Maximum at the walls of the tubs (b) Constant at all points in the cross section of the tube (c) Maximum along the axis of the tube (d) Independent of the pressure-head

Last Answer : Ans:(c)

A sample of soil 10 cm height and 50 cm2 in c/s area water flows through the soil under a constant head of 80 cm. Water collected in 9 minutes is 450 C.C. Find the coefficient of permeability.

Description : A sample of soil 10 cm height and 50 cm2 in c/s area water flows through the soil under a constant head of 80 cm. Water collected in 9 minutes is 450 C.C. Find the coefficient of permeability. 

Last Answer : Solution: 

If the chosen diameter of a pipe, is less than the economical diameter (A) Cost of pipe will be less (B) Head loss will be high (C) Cost of pumping will be more than saving (D) All the above

Description : If the chosen diameter of a pipe, is less than the economical diameter  (A) Cost of pipe will be less  (B) Head loss will be high  (C) Cost of pumping will be more than saving  (D) All the above

Last Answer : (D) All the above

A compound pipe is required to be replaced by a new pipe. The two pipes are said to be equivalent, if (A) Length of both the pipes is same (B) Diameter of both the pipes is same (C) Loss of head and discharge of both the pipes is same (D) Loss of head and velocity of flow in both the pipes is same

Description : A compound pipe is required to be replaced by a new pipe. The two pipes are said to be equivalent, if (A) Length of both the pipes is same (B) Diameter of both the pipes is same (C) Loss of ... discharge of both the pipes is same (D) Loss of head and velocity of flow in both the pipes is same

Last Answer : Answer: Option C

According to Darcy's formula, the loss of head due to friction in the pipe is (where f = Darcy's coefficient, l = Length of pipe, v = Velocity of liquid in pipe, and d = Diameter of pipe) (A) flv²/2gd (B) flv²/gd (C) 3flv²/2gd (D) 4flv²/2gd

Description : According to Darcy's formula, the loss of head due to friction in the pipe is (where f = Darcy's coefficient, l = Length of pipe, v = Velocity of liquid in pipe, and d = Diameter of pipe) (A) flv²/2gd (B) flv²/gd (C) 3flv²/2gd (D) 4flv²/2gd

Last Answer : Answer: Option D

The loss of head due to friction in a pipe of uniform diameter in which a viscous flow is taking place, is (where RN = Reynold number) (A) 1/RN (B) 4/RN (C) 16/RN (D) 64/RN

Description : The loss of head due to friction in a pipe of uniform diameter in which a viscous flow is taking place, is (where RN = Reynold number) (A) 1/RN (B) 4/RN (C) 16/RN (D) 64/RN

Last Answer : Answer: Option C

The loss of head due to viscosity for laminar flow in pipes is (where d = Diameter of pipe, l = Length of pipe, v w = Specific weight of the flowing liquid) (A) 4 (B) 8 (C) 16 (D) 32

Description : The loss of head due to viscosity for laminar flow in pipes is (where d = Diameter of pipe, l = Length of pipe, v w = Specific weight of the flowing liquid) (A) 4 (B) 8 (C) 16 (D) 32

Last Answer : Answer: Option D

If the velocity of flow as well as the diameter of the flowing pipe are respectively doubled through a pipe system in use since long, the head loss will thereafter be (a) Halved (b) Doubled (c) Increased 4 times (d) No change

Description : If the velocity of flow as well as the diameter of the flowing pipe are respectively doubled through a pipe system in use since long, the head loss will thereafter be (a) Halved (b) Doubled (c) Increased 4 times (d) No change

Last Answer : (b) Doubled

The equivalent diameter for the annulus of a double pipe heat exchanger, whose inner pipe has fins on the outside is __________ compared to the same size pipes without fins. (A) More (B) Less (C) Same (D) Unpredictable

Description : The equivalent diameter for the annulus of a double pipe heat exchanger, whose inner pipe has fins on the outside is __________ compared to the same size pipes without fins. (A) More (B) Less (C) Same (D) Unpredictable

Last Answer : (B) Less

Vena-contracta pressure tapping is at a distance __________ from the position of an orificemeter fitted in a pipe of internal diameter 'd' (A) d (B) 0.5 d (C) 2d (D) 4d

Description : Vena-contracta pressure tapping is at a distance __________ from the position of an orificemeter fitted in a pipe of internal diameter 'd' (A) d (B) 0.5 d (C) 2d (D) 4d

Last Answer : (B) 0.5 d

Nominal size of a pipe is an indication of its __________ diameter. (A) Inner (B) Outer (C) Approximate (D) None of these

Description : Nominal size of a pipe is an indication of its __________ diameter. (A) Inner (B) Outer (C) Approximate (D) None of these

Last Answer : (C) Approximate

Identification of pipelines carrying different liquids and gases is done by the __________ of the pipe(A) Diameter(B) Colour(C) Altitude(D) None of these.

Description : Identification of pipelines carrying different liquids and gases is done by the __________ of the pipe. (A) Diameter (B) Colour (C) Altitude (D) None of these

Last Answer : (B) Colour

Transition length for turbulent flow in smooth pipe is equal to __________ times the pipe diameter. (A) 0.5 (B) 5 (C) 50 (D) 500

Description : Transition length for turbulent flow in smooth pipe is equal to __________ times the pipe diameter. (A) 0.5 (B) 5 (C) 50 (D) 500

Last Answer : (C) 50

The maximum discharge through a circular channel takes place, when the depth of the fluid flow is __________ times the pipe diameter. (A) 0.25 (B) 0.5 (C) 0.66 (D) 0.95

Description : The maximum discharge through a circular channel takes place, when the depth of the fluid flow is __________ times the pipe diameter. (A) 0.25 (B) 0.5 (C) 0.66 (D) 0.95

Last Answer : (D) 0.95

Transition length for a turbulent fluid entering into a pipe is around __________ times the pipe diameter. (A) 5 (B) 50 (C) 500 (D) 5000

Description : Transition length for a turbulent fluid entering into a pipe is around __________ times the pipe diameter. (A) 5 (B) 50 (C) 500 (D) 5000

Last Answer : (B) 50

Which of the following is not the function of a volute casing provided in a centrifugal pump? (A) To reduce the head loss in discharge (B) To increase the pump efficiency (C) To collect liquid from the periphery of the impeller and to transmit it to the delivery pipe at constant velocity (D) To increase the pump discharge rate

Description : Which of the following is not the function of a volute casing provided in a centrifugal pump? (A) To reduce the head loss in discharge (B) To increase the pump efficiency (C) To collect liquid ... and to transmit it to the delivery pipe at constant velocity (D) To increase the pump discharge rate

Last Answer : Option D

Pick out the wrong statement pertaining to fluid flow. (A) The ratio of average velocity to the maximum velocity for turbulent flow of Newtonian fluid in circular pipes is 0.5 (B) The Newtonian fluid velocity in a circular pipe flow is maximum at the centre of the pipe (C) Navier-Stokes equation is applicable to the analysis of viscous flows

Description : Pick out the wrong statement pertaining to fluid flow. (A) The ratio of average velocity to the maximum velocity for turbulent flow of Newtonian fluid in circular pipes is 0.5 (B) The Newtonian ... at the centre of the pipe (C) Navier-Stokes equation is applicable to the analysis of viscous flows

Last Answer : (A) The ratio of average velocity to the maximum velocity for turbulent flow of Newtonian fluid in circular pipes is 0.5