In Frame Relay, when a _____ is selected, the correspondingtable entry is recorded for all switches by the administrator A) PVC B) SVC C) either (a) or (b) D) neither (a) nor (b)

In Frame Relay, when a _____ is selected, the correspondingtable entry is recorded for all switches by the administrator
A)
PVC
B)
SVC
C)
either (a) or (b)
D)
neither (a) nor (b)
by

1 Answer

Answer :

PVC
by

Related questions

In Frame Relay, when. ______ is selected, it requires establishing andterminatingphases A) a PVC B) an SVC C) either (a) or (b) D) neither (a) nor (b)

Description : In Frame Relay, when. ______ is selected, it requires establishing andterminatingphases A) a PVC B) an SVC C) either (a) or (b) D) neither (a) nor (b)

Last Answer : an SVC

VCIs in Frame Relay arecalled ______. A) PVC B) SVC C) DLCIs D) none of the above

Description : VCIs in Frame Relay arecalled ______. A) PVC B) SVC C) DLCIs D) none of the above

Last Answer : DLCIs

Frame Relay provides ________. A) PVCs B) SVCs C) either (a) or (b) D) neither (a) nor (b)

Description : Frame Relay provides ________. A) PVCs B) SVCs C) either (a) or (b) D) neither (a) nor (b)

Last Answer : Frame Relay

- MAC is to Ethernet what ________ is to Frame Relay. A. DLCI B. LCI C. PVC D. None of the above

Description : - MAC is to Ethernet what ________ is to Frame Relay. A. DLCI B. LCI C. PVC D. None of the above

Last Answer : DLCI

At the data link layer, Frame Relayusesa protocol that supports _____control. A) flow B) error C) either (a) or (bD)neither (a) nor (b)

Description : At the data link layer, Frame Relayusesa protocol that supports _____control. A) flow B) error C) either (a) or (b D) neither (a) nor (b)

Last Answer : neither (a) nor (b)

. A ………………………... is constructed manually by the system administrator using the route command. A. static routing table B. dynamic routing table C. both a and b D. neither a nor b

Description : . A ………………………... is constructed manually by the system administrator using the route command. A. static routing table B. dynamic routing table C. both a and b D. neither a nor b

Last Answer : A. static routing table

In Frame Relay, the EA field defines thenumber of bytes; it is _____ in the last byte of the address. A) 0 B) 1 C) 2 D) 3

Description : In Frame Relay, the EA field defines thenumber of bytes; it is _____ in the last byte of the address. A) 0 B) 1 C) 2 D) 3

Last Answer : 1

A ________network is made of a set of switches connected by physical links, in which each link is divided into nchannels. A) line-switched B) frame-switched C) circuit-switched D) none of the above

Description : A ________network is made of a set of switches connected by physical links, in which each link is divided into nchannels. A) line-switched B) frame-switched C) circuit-switched D) none of the above

Last Answer : circuit-switched

In IEEE 802.11, _______ isan optionalaccess method that can be implemented inan infrastructure network (not in an ad hocnetwork). A) DCF B) PCF C) either (a) or (b) D) neither (a) nor (b)

Description : In IEEE 802.11, _______ isan optionalaccess method that can be implemented inan infrastructure network (not in an ad hocnetwork). A) DCF B) PCF C) either (a) or (b) D) neither (a) nor (b)

Last Answer : PCF

In IEEE 802.11, a BSS with an AP is sometimes referred toas ____________. A) an ad hocarchitecture B) an infrastructurenetworkC)either (a) or (b)D)neither (a) nor (b)

Description : In IEEE 802.11, a BSS with an AP is sometimes referred toas ____________. A) an ad hocarchitecture B) an infrastructurenetwork C) either (a) or (b) D) neither (a) nor (b)

Last Answer : an infrastructurenetwork

In IEEE 802.11, a BSS without an AP is called an _________. A) an ad hocarchitecture B) an infrastructurenetwork C) either (a) or (b) D) neither (a) nor (b)

Description : In IEEE 802.11, a BSS without an AP is called an _________. A) an ad hocarchitecture B) an infrastructurenetwork C) either (a) or (b) D) neither (a) nor (b)

Last Answer : an ad hocarchitecture

________ is actually a multiport repeater. It is normally usedto createconnections between stations in a physical star topology. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)

Description : ________ is actually a multiport repeater. It is normally usedto createconnections between stations in a physical star topology. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)

Last Answer : An activehub

_______ ispart of the media; its location in the Internet model is below thephysical layer. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)

Description : _______ ispart of the media; its location in the Internet model is below thephysical layer. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)

Last Answer : A passivehub

In astar-topology Ethernet LAN, _______ is just a point where the signals coming from different stations collide; it is thecollision point. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)

Description : In astar-topology Ethernet LAN, _______ is just a point where the signals coming from different stations collide; it is thecollision point. A) An activehub B) A passivehub C) either (a)or (b) D) neither (a) nor (b)

Last Answer : A passivehub

_________is just aconnector. A) An activehub B) A passive hub C) either (a)or (b) D) neither (a)nor (b)

Description : _________is just aconnector. A) An activehub B) A passive hub C) either (a)or (b) D) neither (a)nor (b)

Last Answer : A passive hub

A backbone is usually a ______. A) bus B) star C) either (a)or (b) D) neither (a) nor (b)

Description : A backbone is usually a ______. A) bus B) star C) either (a)or (b) D) neither (a) nor (b)

Last Answer : either (a)or (b)

Analog-to-analog conversionis needed if the available bandwidthis _______. A) low-pass B) band-pass C) either (a)or (b) D) neither (a) nor (b)

Description : Analog-to-analog conversionis needed if the available bandwidthis _______. A) low-pass B) band-pass C) either (a)or (b) D) neither (a) nor (b)

Last Answer : band-pass

A(n)_________ signal is a composite analogsignal with an infinite bandwidth. A) digital B) analog C) either (a)or (b) D) neither (a) nor (b

Description : A(n)_________ signal is a composite analogsignal with an infinite bandwidth. A) digital B) analog C) either (a)or (b) D) neither (a) nor (b

Last Answer : digital

Signals can be ________. A) analog B) digitalC)either (a)or (b)D)neither (a) nor (b)

Description : Signals can be ________. A) analog B) digital C) either (a)or (b) D) neither (a) nor (b)

Last Answer : either (a)or (b)

A ring SONET network can be _________. A) unidirectional B) bidirectional. C) either (a) or (b) D) neither (a) nor (b)

Description : A ring SONET network can be _________. A) unidirectional B) bidirectional. C) either (a) or (b) D) neither (a) nor (b)

Last Answer : bidirectional.

A linear SONET network can be __________. A) point-to-point B) multipoint C) either (a) or (b) D) neither (a) nor (b)

Description : A linear SONET network can be __________. A) point-to-point B) multipoint C) either (a) or (b) D) neither (a) nor (b)

Last Answer : point-to-point

SDH hasdefined ahierarchy of signals called ________. A) STSs B) STMs C) either (a) or (b) D) neither (a) nor (b)

Description : SDH hasdefined ahierarchy of signals called ________. A) STSs B) STMs C) either (a) or (b) D) neither (a) nor (b)

Last Answer : STSs

______ isa standard developed by ITU-T. A) SONET B) SDH C) either (a) or (b) D) neither (a) nor (b)

Description : ______ isa standard developed by ITU-T. A) SONET B) SDH C) either (a) or (b) D) neither (a) nor (b)

Last Answer : either (a) or (b)

isa standard developed by ANSI for fiber-opticnetworks. A) SONET B) SDH C) either (a) or (b) D) neither (a) nor (b)

Description : isa standard developed by ANSI for fiber-opticnetworks. A) SONET B) SDH C) either (a) or (b) D) neither (a) nor (b)

Last Answer : SDH

The …………………... option tells netstat to display the status of all configured network interfaces. A. -n B. -i C. either a or b D. neither a nor b

Description : The …………………... option tells netstat to display the status of all configured network interfaces. A. -n B. -i C. either a or b D. neither a nor b

Last Answer : B. -i

The _____ houses the switches in token ring. A. transceiver B. nine-pin connector C. MAU D. NIC E. None of the above

Description : The _____ houses the switches in token ring. A. transceiver B. nine-pin connector C. MAU D. NIC E. None of the above

Last Answer : MAU

______ eliminates the varying delay times associated withdifferent-size packets. A) X.25 B) Frame Relay C) ATM D) all of theabove

Description : ______ eliminates the varying delay times associated withdifferent-size packets. A) X.25 B) Frame Relay C) ATM D) all of theabove

Last Answer : ATM

______ is the cell relay protocol designed by the corresponding Forum and adopted by the ITU-T. A) X.25 B) Frame Relay C) ATM D) none of the above

Description : ______ is the cell relay protocol designed by the corresponding Forum and adopted by the ITU-T. A) X.25 B) Frame Relay C) ATM D) none of the above

Last Answer : ATM

Frame Relay networks offer an optioncalled ______________that sends voice through the network. A) VOFR B) FRAD C) MUX D) none of the above

Description : Frame Relay networks offer an optioncalled ______________that sends voice through the network. A) VOFR B) FRAD C) MUX D) none of the above

Last Answer : VOFR

To handleframesarrivingfrom other protocols, Frame Relay uses adevice calleda _________. A) VOFR B) FRAD C) MUX D) none of the above

Description : To handleframesarrivingfrom other protocols, Frame Relay uses adevice calleda _________. A) VOFR B) FRAD C) MUX D) none of the above

Last Answer : FRAD

In Frame Relay, an address can be________ bytes. A) only 2 B) 2 to 3 C) 2 to 4 D) none of the above

Description : In Frame Relay, an address can be________ bytes. A) only 2 B) 2 to 3 C) 2 to 4 D) none of the above

Last Answer : 2 to 4

Frame Relay has_______. A) only the physical layer B) only thedata link C) the physical and data link layers D) the physical, data link, andnetwork layers

Description : Frame Relay has_______. A) only the physical layer B) only thedata link C) the physical and data link layers D) the physical, data link, andnetwork layers

Last Answer : the physical and data link layers

________ is a virtual-circuit wide-area network that was designed in response to demands fora new type of WAN in thelate1980s and early 1990s. A) X.25 B) Frame Relay C) ATM D) none of the above

Description : ________ is a virtual-circuit wide-area network that was designed in response to demands fora new type of WAN in thelate1980s and early 1990s. A) X.25 B) Frame Relay C) ATM D) none of the above

Last Answer : Frame Relay

Which protocols adopted the standards of HDLC (High Level Link Control) protocol? a. X.25 protocol as LAPB (Link Access Procedure Balanced, V.42 protocol as LAPM (Link Access Procedure for Modems) b. Frame Relay protocol as LAPF (Link Access Procedure for Frame Relay) c. ISDN (Integrated Services Digital Network) protocol as LAPD (Link Access Procedure on D channel) d. All the above

Description : Which protocols adopted the standards of HDLC (High Level Link Control) protocol? a. X.25 protocol as LAPB (Link Access Procedure Balanced, V.42 protocol as LAPM (Link Access Procedure for ... Services Digital Network) protocol as LAPD (Link Access Procedure on D channel) d. All the above

Last Answer : d. All the above

Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control)c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above

Description : Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control) c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above

Last Answer : d. All the above

There is a lamp inside a photography darkroom. When the darkroom door is closed, it is impossible to tell from outside the room whether or not the lamp is on. There are two switches outside the door of the darkroom. One or both of the switches may control the lamp. It also could be that neither of the switches control the lamp. All you know is that the light bulb is currently off and that the lamp and bulb are in working condition. The darkroom door is closed and once you open the door you cannot touch either of the switches. If you can only open the dark-room door one time, how can you tell which switches, if any, control the lamp? -Riddles

Description : There is a lamp inside a photography darkroom. When the darkroom door is closed, it is impossible to tell from outside the room whether or not the lamp is on. There are two switches outside the door of ... dark-room door one time, how can you tell which switches, if any, control the lamp? -Riddles

Last Answer : Turn the first switch on and leave it on for ten minutes. After ten minutes, turn that switch off and turn the second switch on. Open the darkroom door, and lightly (in case it is hot) touch the ... one controls the lamp. If the lamp is off, and the bulb is cool, neither switch controls the lamp.

The following are electronic record a) Record which is printed on a paper. b) Record which is stored , recorded, or copied in optical or magnetic media produced by computer c) Both A & B d) Neither A nor B

Description : The following are electronic record a) Record which is printed on a paper. b) Record which is stored , recorded, or copied in optical or magnetic media  produced by computer c) Both A & B d) Neither A nor B

Last Answer : c) Both A & B

A channel strategy that limits availability of products to a few carefully selected outlets in a given market area is called ______________ 1. Selective channel 2. Intensive channel 3. Both 1 & 2 4. Neither 1 nor 2 5. None of these

Description : A channel strategy that limits availability of products to a few carefully selected outlets in a given market area is called ______________ 1. Selective channel 2. Intensive channel 3. Both 1 & 2 4. Neither 1 nor 2 5. None of these

Last Answer : Selective channel

In ________,a station monitors the medium after it sends a frame to see if the transmission was successful. If so, the station is finished. If, however, there is a collision, the frameis sentagain. A) CSMA/CA B) CSMA/CD C) either (a)or (b) D) both (a) and (b)

Description : In ________,a station monitors the medium after it sends a frame to see if the transmission was successful. If so, the station is finished. If, however, there is a collision, the frameis sentagain. A) CSMA/CA B) CSMA/CD C) either (a)or (b) D) both (a) and (b)

Last Answer : CSMA/CD

A data terminal serves as an a. Effector b. sensor c. both a and b d. neither a nor b

Description : A data terminal serves as an a. Effector b. sensor c. both a and b d. neither a nor b

Last Answer : both a and b

In__________, eachstation is forced to send only at the beginning of the time slot. A) pure ALOHA B) slotted ALOHA C) both (a) and (b) D) neither (a) nor (b)

Description : In__________, eachstation is forced to send only at the beginning of the time slot. A) pure ALOHA B) slotted ALOHA C) both (a) and (b) D) neither (a) nor (b)

Last Answer : slotted ALOHA

Gigabit Ethernet access methods include _______ mode. A) half-duplex B) full-duplex C) both (a) and (b) D) neither (a) nor (b)

Description : Gigabit Ethernet access methods include _______ mode. A) half-duplex B) full-duplex C) both (a) and (b) D) neither (a) nor (b)

Last Answer : both (a) and (b)

In___________ thereis alwaysa transition at the middle of the bit, but thebit values are determined at the beginningof the bit. If the nextbit is 0, there is a transition; if the next bit is 1, there is none. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Description : In___________ thereis alwaysa transition at the middle of the bit, but thebit values are determined at the beginningof the bit. If the nextbit is 0, there is a transition; if the next bit is 1, there is none. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Last Answer : differential Manchester

In_______encoding, the duration of the bit is divided into twohalves. Thevoltage remains at one level during thefirst half and moves to the other level in the second half. The transition at the middle of the bit provides synchronization. A) Manchester B) differential ManchesteC) both (a) and (b) D) neither (a) nor (b)r

Description : In_______encoding, the duration of the bit is divided into twohalves. Thevoltage remains at one level during thefirst half and moves to the other level in the second half. The transition at the middle of the bit ... Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Last Answer : both (a) and (b)

The idea of RZ andthe ideaof NRZ-I are combined into the ________ scheme. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Description : The idea of RZ andthe ideaof NRZ-I are combined into the ________ scheme. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Last Answer : differential Manchester

The idea of RZ andthe ideaof NRZ-L are combined into the ________ scheme. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Description : The idea of RZ andthe ideaof NRZ-L are combined into the ________ scheme. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Last Answer : Manchester

In______, the changeor lackof change in the level of the voltagedetermines the value of the bit. A) NRZ-I B) NRZ-L C) both (a)and (b) D) neither (a) nor (b)

Description : In______, the changeor lackof change in the level of the voltagedetermines the value of the bit. A) NRZ-I B) NRZ-L C) both (a)and (b) D) neither (a) nor (b)

Last Answer : NRZ-I

In_____, the level of the voltagedetermines the valueof the bit. A) NRZ-I B) NRZ-L C) both (a) and (b) D) neither (a) nor (b)

Description : In_____, the level of the voltagedetermines the valueof the bit. A) NRZ-I B) NRZ-L C) both (a) and (b) D) neither (a) nor (b)

Last Answer : NRZ-L

_________ does not provide reliable end to end communication. a. TCP b. UDPc. Both TCP and UDP d. Neither TCP nor UDP

Description : _________ does not provide reliable end to end communication. a. TCP b. UDP c. Both TCP and UDP d. Neither TCP nor UDP

Last Answer : b. UDP

A ……………………….. is built from the information exchanged by routing protocols. A. static routing table B. dynamic routing table C. both a and bD. neither a nor b

Description : A ……………………….. is built from the information exchanged by routing protocols. A. static routing table B. dynamic routing table C. both a and b D. neither a nor b

Last Answer : B. dynamic routing table