State the classification of distribution substation.

State the classification of distribution substation. 
by

1 Answer

Answer :

The classification of distribution substation.

1. Pole mounted distribution substation

2. Plinth mounted distribution substation

3. Compact/prefabricated distribution substation

4. Underground distribution substation

5. Indoor distribution substation

6. Outdoor distribution substation

7. Mobile distribution substation 
by

Related questions

State the losses in secondary distribution system.

Description : State the losses in secondary distribution system. 

Last Answer : The losses in secondary distribution system: a) Technical losses: 1. Due to poor voltage 2. Due to unbalance load 3. Due poor quality of transformer & its components 4. Due to poor quality ... of induction type of energy meter. 3. Lack of administration. 4. Energy theft 5. Unmetered supply

State the condition for selecting site for distribution substation.

Description : State the condition for selecting site for distribution substation. 

Last Answer : Following condition should be considered while selecting site for distribution sub-station:-  1. Near load center :  Sub-station should be located near load center to reduce cost of Transmission and ... free from earthquake :  To avoid damage to sub-station area should be free earth quake. 

State the procedure for testing of earth pit resistance with necessary diagrams.

Description : State the procedure for testing of earth pit resistance with necessary diagrams.

Last Answer : Following procedure (Method) for testing of earth pit resistance with necessary diagrams. 1) Earth Tester : i) Three point method ii) Four point method 2) By Potential drop method 3 ... of that earthing pit. In this test the accuracy is less but electrical rods are not required. 

State the procedure for laying / installation of underground cable.

Description : State the procedure for laying / installation of underground cable.  

Last Answer : 1) Direct laying Cable: or Trench laying method: Procedure: * For laying of a cable trench about 1.5m deep and 0.5m wide is made along the cable route. * A ... over. * Cables laid in this manner are usually plain lead covered because troughing affords good mechanical protection. 

State any two advantages of MCB over Fuse. State the standard specifications of MCB available in the market.

Description : State any two advantages of MCB over Fuse. State the standard specifications of MCB available in the market.  

Last Answer : Following advantages of MCB over Fuse: 1. No need of replacement of fuse wire. 2. Manually restore of supply is simple. 3. Fault understanding by visual inspection 4. More safe than fuse The standard specifications of ... 6A, 10A,16A,20A, 25A, 30A, 32A, 40A, 50A, 60A and 63A 6. 250V and 450 v

State the type of insulating materials under Class Y and Class B.

Description : State the type of insulating materials under Class Y and Class B.

Last Answer : The type of insulating materials under Class Y : 1. Cotton  2. Silk 3. Paper 4. Rubber 5. PVC The type of insulating materials under Class B: 1. Backelite 2. Impregnated varnish 3. Mica 4. Fiber glass 5. Asbestos 

State the types of protections provided by MCB.

Description : State the types of protections provided by MCB. 

Last Answer : The types of protections provided by MCB: 1. MCB provides short circuit protection. 2. MCB provides overload protection

State the applications of TIG welding.

Description : State the applications of TIG welding.

Last Answer : The applications of TIG welding are as follows: 1. Mostly used to weld aluminum and aluminum alloys. 2. It is used to weld stainless steel, carbon base alloy, copper base alloy, nickel base alloy etc. 3. It is used to welding dissimilar metals. 4. It is mostly used in aerospace industries.

State the applications of rolling.

Description : State the applications of rolling.

Last Answer : Applications of rolling are as follows: 1. Concrete reinforcing bars. 2. Plates. 3. Wire rods. 4. Sheet and strip. 5. Rails. 6. Piping and tubes. 7. Body panels. 8. Construction materials

State the modification to be done in dc series motor to work satisfactorily as ac series motor. State applications of ac series motor.

Description : State the modification to be done in dc series motor to work satisfactorily as ac series motor. State applications of ac series motor.

Last Answer : Modifications are necessary in a dc series motor so that it operates satisfactorily on ac supply. The modifications are as follows:  1) AC series motor is built with a few field turns as ... and grinders 5) High speed vacuum cleaners 6) Sewing machines 7) Food processors 8) Drilling machine 

State the need of automation.

Description : State the need of automation. 

Last Answer : Need of Automation in Process : * To fulfill the demand of product at right time. * To reduce the human errors and involvement of human being in the process. * For better productivity. * For better ... of process. * For better quality. * For reducing man power. * For reducing cost of product.

State the impact of inductance and resistance on transmission line performance

Description : State the impact of inductance and resistance on transmission line performance

Last Answer : Impact of inductance on transmission line: 1) It causes IXL drop in transmission line which affects regulation. 2) It is the only parameter which decides power transmission capacity of line i. ... is very small, it causes losses, temperature rise& poor voltage regulation so it cannot be neglected

State the needs and benefits of star labelling.

Description : State the needs and benefits of star labelling. 

Last Answer : Needs of star labelling: * Star labelling is meanly required to recognize quality of product * Star labelling is also required to determine life and efficiency of the product. * Star labels ... emission and air pollution will be reduces. 5. Market efficiency and compilation will be improve. 

State the advantages of cogeneration.

Description : State the advantages of cogeneration. 

Last Answer : Advantages of co-generation: 1) Co-generation can meet both power & heat requirements. 2) Less cost than conventional generation. 3) Higher system efficiency due to energy wastage is highly ... reduces due to cogeneration plant is located in same premises. 10) It can maintain grid stability 

State the requirements of illumination scheme of shipyard.

Description : State the requirements of illumination scheme of shipyard.

Last Answer : Requirements of illumination scheme of shipyard:  1) The shipyard lighting always depends upon the surrounding conditions. e.g. wind pressure, rain fall, location of shipyard from the sea-share etc. ... solar grass lamps, LED-Solar energy lawn lamps, various focus lamps, metal halide lamps etc.

State the various lighting calculations methods and Describe any one of them.

Description : State the various lighting calculations methods and Describe any one of them.

Last Answer : Lighting calculation methods: 1. Lumens or Light flux method 2. Point to point or Inverse Square law method 3. Watts per Square meter method i) Lumens or Light ... is taken according to the illumination desired on an average value considering overall efficiency of the lighting system.

State the different types of outdoor flood lighting and where are they used.

Description : State the different types of outdoor flood lighting and where are they used.

Last Answer : There are three types of projectors used for flood lighting :  a) Narrow beam Projector b) Medium angle Projector c) Wide angle Projector a) Narrow beam Projectors: - Light beam with such ... yards, stadiums, car parking area etc. 3) It is used for illuminating advertisements, boarding's etc.

State the purpose of lighting control. List the different types of dimmer.

Description : State the purpose of lighting control. List the different types of dimmer.

Last Answer : Purpose of Lighting Control:- 1. To turn ON or OFF the lamps 2. For dimming: The dimming control permits the adjustment of lighting over a range. 3. For changing the lighting levels ... operated dimmer 6) Triac operated Dimmer 7) PWM (Pulse width modulation) Controlled technique.

State the selection criterion of the lamp for various purposes.

Description : State the selection criterion of the lamp for various purposes.

Last Answer : Selection criterion of the lamp for various purposes:  While selecting a lamp for a particular purpose, the available lamps are compared on the basis of following criteria: * Light output ... such as ballasts * Compatibility with the electrical system * Suitability for the operating environment

State functions of the following pins of IC555.

Description : State functions of the following pins of IC555.

Last Answer : 1) Control: - The dc Voltage at this pin is 2/3 Vcc. An external voltage applied to this changes threshold as well as trigger voltage to obtain pulse width modulated output.  2) Trigger: - The ... greater than 2/3 Vcc . When the voltage goes below 1/3 Vcc, output of the timer goes high.

State the principle of operation of d.c. motor.

Description : State the principle of operation of d.c. motor.

Last Answer : When a current carrying conductor is placed in a magnetic field, the conductor experiences the force. The magnitude of force is given by F = BIL newton  where F – Force   B – maximum flux density   I – Current   L – Length of conductor

Classification of Substation According to Method of Construction

Description : Classification of Substation According to Method of Construction

Last Answer : Classification of Substation According to Method of Construction:- 1. Indoor Substation 2. Outdoor Substation 3. Gas insulated Substation 4. Underground Substation 5. Pole mounted substation 6. Plinth Substation 7. Compact/prefabricated substation

State the insulating materials used in motor. Write temperature class and withstand temperature ranges for them.

Description : State the insulating materials used in motor. Write temperature class and withstand temperature ranges for them. 

Last Answer : The insulating materials used in motor are as belows: 1. Cotton, 2. Silk, or paper, 3. Press board, 4. Resins 5. PVC 6. Cellulose-Fiber, 7. Enameled coating, etc  ... Over 180° Mica, porcelain, ceramics, glass quartz, asbestos, treated glass fiber or treated asbestos. etc.

State the material used for making (1) Magnetic Core (2) Fuse element

Description : State the material used for making (1) Magnetic Core (2) Fuse element  

Last Answer : The material used for making of:  (1) Magnetic Core : Iron, cobalt, Nickel, CRGO, HRGO , silicon steel  (2) Fuse Element: Tin- lead wire, Tinned copper wire 

State two applications of : (i) PVC paper (ii) Porcelain with type of class based on withstand temperature is insulating material.

Description : State two applications of : (i) PVC paper (ii) Porcelain with type of class based on withstand temperature is insulating material. 

Last Answer :  (i) Application of PVC paper : 1. It is used in slot lining or motor winding insulation purpose 2. For Insulation of Transformer winding (ii) Application of Porcelain : 1. Mainly used for manufacturing ... on withstand temperature : * H' & C' Class of insulation i e. 180° and above 180°C 

State different types of holders used in wiring installation.

Description : State different types of holders used in wiring installation.

Last Answer : Following types of holders used in wiring installation: 1. Pendent Holder 2. Batten Holder 3. Angle holder 4. Screwed holder 

State properties of conductor material used for overhead conductor.

Description : State properties of conductor material used for overhead conductor. 

Last Answer : Following are the properties of conductor material:-   1. High conductivity :- Material should have high conductivity 2. High mechanical strength:- Material should have sufficiently high mechanical strength ... available & less costly. 9. Scrap Value: - Material should have high scrap value. 

State the difference between energy conservation and energy audit.

Description : State the difference between energy conservation and energy audit. 

Last Answer : energy conservation Energy audit It is reducing the growth of energy consumption by avoiding unnecessary usage of energy It is an inspection, survey & analysis of energy flows ... Various measuring instruments, with proper sensing elements are required for the energy audit. 

What is the purpose of auxiliary controller in substation?

Description : What is the purpose of auxiliary controller in substation?

Last Answer : The systems of substation auxiliaries ensure operation of substations providing internal consumers of substations with operating direct and alternating currents. Any breakdown (loss) of auxiliary systems ... whole substation, as well as serious problems during its subsequent putting into operation.

Explain the suitability of aluminium as an electrical conductor with respect to its mechanical and electrical properties.

Description : Explain the suitability of aluminium as an electrical conductor with respect to its mechanical and electrical properties. 

Last Answer : Following are requirements of conductor:- i) High conductivity :  Material should have high conductivity, So that * cross section of conductor (size) reduces, * Copper losses reduces, * So Efficiency ... . Boiling point is 1820°C 9. Specific gravity is 2.7 10. High resistance to corrosion. 

What are the uses of Thermistors ?

Description : What are the uses of Thermistors ?

Last Answer : Thermistors are frequently used in electronic circuits in which it is desired to provide temperature measurement, temperature control, and temperature compensation.

A charge of 0.1 C moves past a given point every 0.01 s. How much is the current?

Description : A charge of 0.1 C moves past a given point every 0.01 s. How much is the current?

Last Answer : The current is 10.0A.  1ampere = 1 Coulomb per 1 second.  0.1Coulombs ÷ 0.01seconds = 10.0amperes.

How does the resistance of a conductor compare to that of an insulator?

Description : How does the resistance of a conductor compare to that of an insulator?

Last Answer : The resistance of a conductor can be significantly lower than the resistance of an insulator, depending on each material's atomic properties.

What is the smallest unit of a compound with the same chemical characteristics?

Description : What is the smallest unit of a compound with the same chemical characteristics?

Last Answer : The molecule is the smallest unit of a compound with the same chemical characteristics.

What is the function of an electrical filter ?

Description : What is the function of an electrical filter ?

Last Answer : Filter separates different components that are mixed together. Electrical filter can separate different frequency components. Electrical filters are the electrical circuits which are use to remove unwanted frequency components from the signal.

State advantages of rotating field type alternators.

Description : State advantages of rotating field type alternators. 

Last Answer : Advantages of Rotating Field Type Alternator: 1) For high-voltage alternator, large space is required to accommodate conductors with insulation, as high voltage is induced in them. If field poles are placed ... is kept rotating. 8) Rotating field is comparatively light and can run with high speed. 

State advantages of short pitch winding over full pitch winding in alternators.

Description : State advantages of short pitch winding over full pitch winding in alternators. 

Last Answer : Advantages of Short Pitch Winding over Full Pitch Winding in Alternators: 1) Short pitching reduces the amount of copper needed for end connection when compared with full pitched coil. 2) They ... reduced, thereby increasing the efficiency. 4) The power quality of generated emf is improved. 

State design considerations for illumination scheme of commercial complex.

Description : State design considerations for illumination scheme of commercial complex.

Last Answer : Design considerations for illumination scheme of commercial complex: * Tasks to be performed in the space * Desired light levels based on the tasks performed in the space * Room size ... conditions * Cleanliness of the area during operation * Maintenance schedule * Availability of daylight

State two types of Electronic dimmer.

Description : State two types of Electronic dimmer.

Last Answer : Two types of electronic dimmers are: 1) S.C.R. operated dimmer 2) Triac operated dimmer 

State different types of electrical signal and draw all types of waveforms.

Description : State different types of electrical signal and draw all types of waveforms.

Last Answer : Types of electrical signals 1) Sine wave 2) Triangular wave 3) Square wave Waveforms

State advantages of MOSFET.

Description : State advantages of MOSFET.

Last Answer : Advantages of MOSFET * MOSFETs provide greater efficiency while operating at lower voltages. * Absence of gate current results in high input impedance. * High switching speed. * They operate at lower ... due to lower resistance of channel. * They are easy to manufacture. * They are portable.

State function of ELCB.

Description : State function of ELCB.

Last Answer : Functions of ELCB: 1. Provides protection to apparatus by detecting the unsafe magnitudes of leakage currents diverting to earth. 2. Disconnect the supply to the circuit if line to ground ... 3. Provides protection to users by detecting the unsafe magnitudes of leakage currents diverting to earth.

List different types of stepper motor. State one application of stepper motor.

Description : List different types of stepper motor. State one application of stepper motor.

Last Answer : Types of stepper motor : (i)Variable - reluctance motor (ii) Permanent- magnet motors (iii) Hybrid motors. Applications of stepper motor : In robotics, In CNC machines, In computers, printers, ... In Watches, In biomedical applications such as X-ray machines, CT scan, In Process control systems. 

Give the classification of the errors used in measuring instrument & state the reason for their occurrence.

Description : Give the classification of the errors used in measuring instrument & state the reason for their occurrence.

Last Answer : Types of errors in measuring instruments:  A) Gross error: These are due to mistakes on the part of person using the instrument.  B) Systematic Error:  i) Instrumental Error: These ... multiplying factor.  C) Random error: These persist even after gross and systematic errors are removed. 

What is the first equipment of the substation connected to the incoming transmission line?

Description : What is the first equipment of the substation connected to the incoming transmission line?

Last Answer : Lightning arrestor is the first equipment of the substation connecting the incoming transmission lines. It protects other substation equipment from lightning and switching surges by suppressing them to ... between both the ends of major equipment such as power transformers for protection.

What are different Bus bar materials used in Substation?

Description : What are different Bus bar materials used in Substation?

Last Answer : Busbars are generally made of copper and Aluminum. Aluminim has the advantage of one third the weight of the copper and also Aluminum requires less maintenance and proper use of alloys provide necessary rigidity required for bus material. Aluminum is used widely in EHV and HV stations

What are the different electrical clearances in Substation?

Description : What are the different electrical clearances in Substation?

Last Answer : Ground Clearance: This is the minimum distance between any live conductor and the earth or ground. Phase Clearance: It is the clearance between the different phases in a circuit or same phases in different ... The limits of work section may be ground or the platform on which the person is working.

What are the different substation components

Description : What are the different substation components

Last Answer : Circuit Breakers, Disconnecting switches, Grounding switches, Current Transformers, Potential Transformers or Capacitor voltage Transformers, Line Traps, Lightning Arrestors, Power Transformers, Shunt ... Station Buses and Insulators, Grounding system, Series capacitors and shunt capacitors.

Isolator in substation is open under ___________ condition?

Description : Isolator in substation is open under ___________ condition?  (A) No load (B) Short circuit (C) Full load (D) None of the above

Last Answer : no load

What does a substation do?

Description : What does a substation do?

Last Answer : At  the  substations,  power  is  boosted  up  for  long  distance  transmission.