Discuss the effect of transmission line parameters on the performance of transmission line .

Discuss the effect of transmission line parameters on the performance of transmission line .
by

1 Answer

Answer :

Following are the effect on performance of transmission line: 

1. Due to resistance (R), voltage drop in transmission line produces

2. Due to resistance (R), copper losses in transmission line produces.

3. Due to inductance (L) voltage drop in transmission line produces.

4. Capacitor (C) draws charging current through transmission line. This charging current produces additional copper losses & voltage drop in transmission line.

5. Due to above reasons, transmission line efficiency gets affected

6. voltage regulation of transmission line gets affected

7. Also power factor of transmission line gets affected

by

Related questions

State line parameters of transmission line.

Description : State line parameters of transmission line. 

Last Answer : Following are the of Line parameters of transmission line:  1. Resistance  2. Inductance  3. Capacitance

Explain the features of flexible AC transmission line (any four). State types of FACTS controller.

Description : Explain the features of flexible AC transmission line (any four). State types of FACTS controller.

Last Answer : Features of flexible AC transmission line:-  1. FACTS increase the reliability of AC grids. 2. It controls the voltage under various load condition 3. It balance reactive power (both ... shunt compensation:- 1. Static synchronous compensator (STATCOM) 2. Static VAR compensator (SVC)

State the limitations of EHVAC transmission line.

Description : State the limitations of EHVAC transmission line. 

Last Answer : Following are the Limitations of EHVAC Transmission:   1. Insulation cost increases as voltage increases 2. Skin effect is more 3. Proximity effect is more. 4. Corona loss increases. 5. Radio ... 18. EHVAC is economical only for bulk amount of power is to be transmitted over long distance. 

List different transmission line components used for power transmission.

Description : List different transmission line components used for power transmission.

Last Answer : 1. Supporting structure (pole) 2. Line insulator 3. Overhead conductor 4. V' Cross arm 5. Top pin support 6. Two Pin Cross arm 7. Four pin cross arm 8. Stay set (Stay wire of ... types of fabrication Clamp (A-type, B-Type) 15. Bird guards 16. Vibration damper 17. Jumpers 

State the effects of low power factor on efficiency and voltage regulation of short transmission lines.

Description : State the effects of low power factor on efficiency and voltage regulation of short transmission lines. 

Last Answer : i) Effect of Low power factor on efficiency:- When power factor of load reduces current drawn by transmission line increases so copper losses in transmission line increases, hence transmission ... increases, so voltage drop in transmission line increases so regulation increases. (Become Poor) 

State the advantages of use of high voltage in transmission of Electric power.

Description : State the advantages of use of high voltage in transmission of Electric power. 

Last Answer : Advantages: 1. As Transmission voltage increases, current decreases. 2. As current decreases, cross section of conductor decreases. 3. As cross section of conductor decreases, its ... high voltage transmission line, successful interconnection of transmission line is possible than low voltage. 

Differentiate between overhead transmission and underground transmission.

Description : Differentiate between overhead transmission and underground transmission.

Last Answer : Points Overhead line  Underground cable Capital cost  Less More Erecting cost  Less More Time require for completion of work Less More Flexibility More ... Space consumed Space consumed  No space consumed Appearance Not good  Very good 

State features of wireless power transmission.

Description : State features of wireless power transmission. 

Last Answer : Features of wireless power transmission:  1. Energy delivered anywhere in the world 2. Zero fuel cost 3. Less losses 4. Less use of copper wires 5. More efficiency 6. Minimum long- ... on cables would never exist in the transmission.  7. Power theft would be not possible at all. 

State the classification of transmission lines depending on length of transmission lines.

Description : State the classification of transmission lines depending on length of transmission lines. 

Last Answer : A) According to Voltage level: ( 2 Marks)  a) High voltage Transmission Line (HV) up to 33 KV  b) Extra High Voltage Transmission Line (EHV) above 33 KV up to 400 KV  c) Ultra ... Transmission Line: - The length of Long transmission Line is above 200KM and its line voltage is above 100KV

effect of inductance and capacitance on performance of transmission line.

Description : effect of inductance and capacitance on performance of transmission line.

Last Answer : Following are the effect on performance of transmission line:  1. Due to inductance (L) voltage drop in transmission line produces.  2. Capacitor (C) draws charging current ... , transmission line efficiency, voltage regulation & also power factor of transmission line gets affected. 

effect of line parameter on performance of transmission line.

Description : effect of line parameter on performance of transmission line. 

Last Answer : Following are the effect of line parameter on performance of transmission line:  1. Due to resistance (R), voltage drop in transmission line & copper losses in transmission line ... transmission line efficiency, voltage regulation & also power factor of transmission line gets affected. 

State the disadvantages of skin effect.

Description :  State the disadvantages of skin effect.

Last Answer : Disadvantages of skin effect:- 1. Full cross section of conductor is not utilized, Therefore effective area of conductor reduces so its resistance increases. 2. Due to increase in resistance, copper ... increases (Since Voltage drop = IR ) 5. So voltage regulation becomes poor (increases) 

State the meaning of ferranti effect and proximity effect.

Description : State the meaning of ferranti effect and proximity effect.  

Last Answer : i) Ferranti effect : When long distance transmission is lightly loaded or there is no load condition than it is observe that receiving end voltage (VR) is found to be greater than sending end ... on conductor causes current in each conductor is re-distributed. This is known as proximity effect.

State the meaning of skin effect and how can it be minimised.

Description : State the meaning of skin effect and how can it be minimised. 

Last Answer : Meaning of skin effect :  When alternating current flows through conductor it has tendency to flow away from center of conductor. i.e. maximum current density is near skin of conductor and goes on ... whenever possible as Skin effect is absent (Since frequency 0) instead of A.C. supply.  

If sending end voltage is Vs at no-load in a transmission line then receiving end voltage is if ABCD parameters of line is given a) Vs b) Vs/A c) 0 d) Infinity

Description : If sending end voltage is Vs at no-load in a transmission line then receiving end voltage is if ABCD parameters of line is given a) Vs b) Vs/A c) 0 d) Infinity

Last Answer : Ans: Vs/A

The parameters of Transmission line are R = 50 Ω/ km, L= 1mH/km ,C = 0.1µf/km, G = 2µV/km. calculate characteristic impedance.

Description : The parameters of Transmission line are R = 50 Ω/ km, L= 1mH/km ,C = 0.1µf/km, G = 2µV/km. calculate characteristic impedance.

Last Answer : The parameters of Transmission line are R = 50 Ω/ km, L= 1mH/km ,C = 0.1µf/km, G = 2µV/km. calculate characteristic impedance.

A transmission line of 200 km has a certain A, B, C and D parameters. If the length is reduced to 60 km

Description : A transmission line of 200 km has a certain A, B, C and D parameters. If the length is reduced to 60 km

Last Answer : A transmission line of 200 km has a certain A, B, C and D parameters. If the length is reduced to 60 km A increases, B decreases

List the properties of line insulators in brief

Description : List the properties of line insulators in brief

Last Answer : Following are the properties of line insulators:  A) Electrical Properties of insulating material:- 1. It should have high resistance. 2. It should have high breakdown voltage. 3. It should have high ... of insulating material:- 1. It should have longer life. 2. It should have low cost

State the meaning of Single line diagram.

Description : State the meaning of Single line diagram.

Last Answer : Meaning of Single line diagram: The single line diagram of a power system is the network which shows the main connections and arrangement of the system components along with their data ( ... breakers, transformers, capacitors, bus bars, and conductors are shown by standardized schematic symbols. 

In four stroke engine which of the following is also known as power stroke a. Suction stroke b. Compression stroke c. Expansion stroke d. Exhaust stroke (Ans:c) Measurements of fuel and air consumption, brake power and incylinder pressure. Tutorials on engine performance parameters. Heat balance sheet. Engine performance curves. 1. The increase in intake air temperature into IC engine,___________its efficiency A. increase B. decrease C. does not alter D. unpredictable on

Description : In four stroke engine which of the following is also known as power stroke a. Suction stroke b. Compression stroke c. Expansion stroke d. Exhaust stroke (Ans:c) Measurements of fuel and air ... into IC engine,___________its efficiency A. increase B. decrease C. does not alter D. unpredictable on

Last Answer : ANSWER : B

If the performance of diesel engine of different sizes, cylinder dimensions and power rating are to be compared, which of the following parameters can be used for such comparison? (a) Swept volume (b) Air fuel ratio (c) Specific brake fuel consumption (d) Volumetric efficiency

Description : If the performance of diesel engine of different sizes, cylinder dimensions and power rating are to be compared, which of the following parameters can be used for such comparison? (a) Swept volume (b) Air fuel ratio (c) Specific brake fuel consumption (d) Volumetric efficiency

Last Answer : Ans :c

What are the important operational performance parameters in design of fuel firing equipment ?

Description : What are the important operational performance parameters in design of fuel firing equipment ?

Last Answer : Fuel flexibility, electrical load following capability, reliability, availability, and maintenance ease.

List the key operational parameters used to define receiver performance.

Description : List the key operational parameters used to define receiver performance.

Last Answer : Receiver sensitivity, bandwidth, and dynamic range.

Code blocks allow many algorithms to be implemented with the following parameters : (A) clarity, elegance, performance (B) clarity, elegance, efficiency (C) elegance, performance, execution (D) execution, clarity, performance

Description : Code blocks allow many algorithms to be implemented with the following parameters : (A) clarity, elegance, performance (B) clarity, elegance, efficiency (C) elegance, performance, execution (D) execution, clarity, performance

Last Answer : (B) clarity, elegance, efficiency

Modulation means A. Varying of information B. Utilization of a single transmission channel to carry multiple signals C. Varying of some parameters of a carrier such as its amplitude to transmit information D. Transmit pulses in DC form on a copper wire

Description : Modulation means A. Varying of information B. Utilization of a single transmission channel to carry multiple signals C. Varying of some parameters of a carrier such as its amplitude to transmit information D. Transmit pulses in DC form on a copper wire

Last Answer : C. Varying of some parameters of a carrier such as its amplitude to transmit information

For a two -port reciprocal network, the three transmission parameters are A = 4, B = 7 and C = 5. ...

Description : For a two -port reciprocal network, the three transmission parameters are A = 4, B = 7 and C = 5. What is the value of D ?  (a) 9.5 (b) 9.0 (c) 8.5 (d) 8.0

Last Answer : For a two -port reciprocal network, the three transmission parameters are A = 4, B = 7 and C = 5. What is the value of D ?  (a) 9.5 (b) 9.0 (c) 8.5 (d) 8.0

State the impact of inductance and resistance on transmission line performance

Description : State the impact of inductance and resistance on transmission line performance

Last Answer : Impact of inductance on transmission line: 1) It causes IXL drop in transmission line which affects regulation. 2) It is the only parameter which decides power transmission capacity of line i. ... is very small, it causes losses, temperature rise& poor voltage regulation so it cannot be neglected

While calculating performance of medium transmission line, what assumptions are made in case of (i) Nominal 'T' Method (ii) Nominal 'TT' Method.

Description : While calculating performance of medium transmission line, what assumptions are made in case of (i) Nominal 'T' Method (ii) Nominal 'TT' Method. 

Last Answer : (i) Assumptions are made in case of Nominal 'T' Method:  a. It is assume that line capacitance is connected at center of transmission line. b. It is assume that half ... assumed that transmission line resistance & reactance per phase is connected in between two half transmission line capacitance 

Equivalent π model is quite suitable for analyzing the performance of transmission line of...

Description : Equivalent π model is quite suitable for analyzing the performance of transmission line of  A) 50 km length B) 150 km length C) 250 km length D) All of the above lengths

Last Answer : 150km because nominal π and T method are used in medium transmission lines . and these lines ranges from 80-240 km

Explain the shackle type insulator with neat sketch.

Description : Explain the shackle type insulator with neat sketch. 

Last Answer : Shackle type insulator with neat sketch:  Explanation: * These insulators are clamped to the cross arms by one metal U' clamp with the help of bolts, nuts & ... ) Shackle insulators are also used when line is going straight but in case of vertical conductor configuration only 

Draw and explain the construction of underground cables.

Description : Draw and explain the construction of underground cables. 

Last Answer : Underground cables:   OR Explanation:- i) Core or conductor: * It function is carry current. * Cable may have single or more than single core conductor. * Conductor ... handling of cables. * It is similar to bedding & consists of fiborous material such as jute. 

Grid distribution system

Description : Grid distribution system

Last Answer : Grid distribution system:-  In this system, when the feeder or loop or ring is charged (energized) by two or more than two substations from two or more than two different generating stations then it is known as “Grid distribution system. In this system only one feeder is utilized at a time. 

Define: primary and secondary distribution system

Description : Define: primary and secondary distribution system 

Last Answer : i) Primary Distribution:  It is a 3-phase, 3-wire transmission line connected in between receiving substation to Distribution substation. OR It is link between receiving substation & ... substation to consumer line. OR It is link between distribution transformer substation & consumer. 

List standard voltage level used in India.

Description : List standard voltage level used in India. 

Last Answer : Standard voltage level used in India: * Generation Voltage : 3.3KV, 6.6KV,11KV and 17.5 KV,21KV (Now a days generation voltage is in the range of 11KV- 33KV) * Primary Transmission voltage :- 220 ... voltages in India are 765 KV (750KV), 400KV, 220KV, 132KV, 110KV, 66KV, 33KV, 22KV, 11KV.

State the meaning of FACTS and explain in brief d-types facts controller.

Description : State the meaning of FACTS and explain in brief d-types facts controller. 

Last Answer : Flexible AC Transmission System (FACTS):- A flexible alternating current transmission system (FACTS) is defined as it is a system composed of static equipment used for the AC transmission of ... so as to increase the transmittable active power. However, more reactive power must be provided.

Define Corona, List its causes and state how it can be avoided.

Description : Define Corona, List its causes and state how it can be avoided. 

Last Answer : Define Corona:  When AC Voltage given across two conductors separated by distance d' as shown figure is increased greater than breakdown voltage of air i.e. 30KV/cm, then air around the conductor gets ... e.g./ using ACSR, bundled conductor 3. By using smooth body conductor and hardware. 

State the condition for selecting site for distribution substation.

Description : State the condition for selecting site for distribution substation. 

Last Answer : Following condition should be considered while selecting site for distribution sub-station:-  1. Near load center :  Sub-station should be located near load center to reduce cost of Transmission and ... free from earthquake :  To avoid damage to sub-station area should be free earth quake. 

List classification of distributor system with their advantages each.

Description : List classification of distributor system with their advantages each.

Last Answer : According to scheme of connection there are three types of distribution systems: - 1.Radial (Tree) distribution system 2.Ring mains (Loop) distribution system 3. Grid (interconnected) ... It has highest reliability to maintain supply even when there was maintenance on any one feeder.

State advantages and disadvantages of radial distributor system.

Description : State advantages and disadvantages of radial distributor system. 

Last Answer : Advantages of radial distributor system: 1. Design of layout is simple. 2. Capital cost & Erecting cost is less as there is only one feeder. 3. Time required for completion of ... maintain supply to consumers when there is maintenance on feeder. 3. Voltage fluctuations are more.

Following factors are to be considered while designing a distributor

Description : Following factors are to be considered while designing a distributor

Last Answer : 1. While designing the distributor voltage drop calculation is important. 2. Voltage drop in distribution system should be maintained within permissible limit (  6%). 3. Layout should ... 14. Fault on nearest distribution system should not affect stability of existing distribution system. 

Optimum number of effects in a multiple effect evaporator is decided by the (A) Cost benefit analysis (B) Floor area availability (C) Terminal parameters (D) Evaporation capacity required

Description : Optimum number of effects in a multiple effect evaporator is decided by the (A) Cost benefit analysis (B) Floor area availability (C) Terminal parameters (D) Evaporation capacity required

Last Answer : (A) Cost benefit analysis

Optimum number of effects in a multiple effect evaporator is decided by the (A) Cost benefit analysis (B) Floor area availability (C) Terminal parameters (D) Evaporation capacity required

Description : Optimum number of effects in a multiple effect evaporator is decided by the (A) Cost benefit analysis (B) Floor area availability (C) Terminal parameters (D) Evaporation capacity required

Last Answer : (A) Cost benefit analysis

09. The reasons determing bioavailability are: a) Rheological parameters of blood b) Amount of a substance obtained orally and quantity of intakes c) Extent of absorption and hepatic first-pass effect d) Glomerular filtration rate

Description : 09. The reasons determing bioavailability are: a) Rheological parameters of blood b) Amount of a substance obtained orally and quantity of intakes c) Extent of absorption and hepatic first-pass effect d) Glomerular filtration rate

Last Answer : C

Explain the effect of following physical hazard parameters on renewal of comprehensive insurance policyi. Age of driver ii. Power and capacity of vehicle iii. Load used iv. Forfeiture of custom duty

Description : Explain the effect of following physical hazard parameters on renewal of comprehensive insurance policyi. Age of driver ii. Power and capacity of vehicle iii. Load used iv. Forfeiture of custom duty

Last Answer : i. Age of driver: If age of driver is more (say more than 65 years then there is more chances of accident than young driver which increases physical hazard.  ii. Power and capacity ... the vehicle it creates physical hazard & chances of accident increases then premium amount also will get increase.

Determine the conductance of a two-wire open line with the following parameters: D = 4 in., d = 0.1 in. and ρ = 2.6x108 Ω-m. A. 2.76x10-9 S/m B. 2.76x10-6 S/m C. 2.76x10-12 S/m D. 2.76x10-3 S/m

Description : Determine the conductance of a two-wire open line with the following parameters: D = 4 in., d = 0.1 in. and ρ = 2.6x108 Ω-m. A. 2.76x10-9 S/m B. 2.76x10-6 S/m C. 2.76x10-12 S/m D. 2.76x10-3 S/m

Last Answer : A. 2.76x10-9 S/m

Parameters can be stacked by just as with procedures: a. Asterisk(*) b. Arrow c. Line d. ‘Pipeline

Description : Parameters can be stacked by just as with procedures: a. Asterisk(*) b. Arrow c. Line d. ‘Pipeline

Last Answer : a. Asterisk(*)

Which one of the following residual biases involves the GPS accuracy? (A) Satellite dependent biases due to uncertainty in the orbital parameters of the satellite (B) Receiver-dependent biases due to clock stability with line (C) Signal propagation biases due to the sphere and troposphere propagation (D) All the above

Description : Which one of the following residual biases involves the GPS accuracy? (A) Satellite dependent biases due to uncertainty in the orbital parameters of the satellite (B) Receiver-dependent biases due to ... (C) Signal propagation biases due to the sphere and troposphere propagation (D) All the above

Last Answer : Answer: Option D

A medium line with parameters A, B, C, D is extended by connecting ...

Description : A medium line with parameters A, B, C, D is extended by connecting a short line of impedance Z in series The overall ABCD parameters of the series combination will be?

Last Answer : A medium line with parameters A, B, C, D is extended by connecting a short line of impedance Z in series The overall ABCD parameters of the series combination will be A, AZ + B, C, CZ + D.

What is the effect of resistance , inductance and capacitance in transmission line ?

Description : What is the effect of resistance , inductance and capacitance in transmission line ?

Last Answer : These 3 factors create voltage drop and power loss of the line. The inductive reactance creates a voltage drop across the line and the capacitance creates a charging current.

Why is the physical length of a coaxial cable transmission line shorter than its electrical length?A. Skin effect is less pronounced in the coaxial cable B. RF energy moves slower along the coaxial cable C. The surge impedance is higher in the parallel feed line D. The characteristic impedance is higher in the parallel feed line

Description : Why is the physical length of a coaxial cable transmission line shorter than its electrical length? A. Skin effect is less pronounced in the coaxial cable B. RF energy moves slower along the ... higher in the parallel feed line D. The characteristic impedance is higher in the parallel feed line

Last Answer : B. RF energy moves slower along the coaxial cable