What are the important operational performance parameters in design of fuel firing equipment ?

What are the important operational performance parameters in design of fuel firing equipment ?
by

1 Answer

Answer :

Fuel flexibility, electrical load following capability, reliability, availability, and maintenance ease.
by

Related questions

List the key operational parameters used to define receiver performance.

Description : List the key operational parameters used to define receiver performance.

Last Answer : Receiver sensitivity, bandwidth, and dynamic range.

List five system design parameters considered when system designers choose the system operational wavelength and link components.

Description : List five system design parameters considered when system designers choose the system operational wavelength and link components.

Last Answer : Launch power, connection losses, bandwidth, cost, and reliability

Higher efficiency in the combustion of solid fuel cannot be achieved by (A) Proper fuel preparation (B) Keeping the flue gas exhaust temperature very high (C) Adopting efficient-fuel firing technique & equipment (D) Supplying correct quantity of combustion air

Description : Higher efficiency in the combustion of solid fuel cannot be achieved by (A) Proper fuel preparation (B) Keeping the flue gas exhaust temperature very high (C) Adopting efficient-fuel firing technique & equipment (D) Supplying correct quantity of combustion air

Last Answer : (B) Keeping the flue gas exhaust temperature very high

Why boiler is purged everytime before starting firing of fuel ?

Description : Why boiler is purged everytime before starting firing of fuel ?

Last Answer : Purging ensures that any unburnt fuel in furnace is removed, otherwise it may lead to explosion.

In four stroke engine which of the following is also known as power stroke a. Suction stroke b. Compression stroke c. Expansion stroke d. Exhaust stroke (Ans:c) Measurements of fuel and air consumption, brake power and incylinder pressure. Tutorials on engine performance parameters. Heat balance sheet. Engine performance curves. 1. The increase in intake air temperature into IC engine,___________its efficiency A. increase B. decrease C. does not alter D. unpredictable on

Description : In four stroke engine which of the following is also known as power stroke a. Suction stroke b. Compression stroke c. Expansion stroke d. Exhaust stroke (Ans:c) Measurements of fuel and air ... into IC engine,___________its efficiency A. increase B. decrease C. does not alter D. unpredictable on

Last Answer : ANSWER : B

If the performance of diesel engine of different sizes, cylinder dimensions and power rating are to be compared, which of the following parameters can be used for such comparison? (a) Swept volume (b) Air fuel ratio (c) Specific brake fuel consumption (d) Volumetric efficiency

Description : If the performance of diesel engine of different sizes, cylinder dimensions and power rating are to be compared, which of the following parameters can be used for such comparison? (a) Swept volume (b) Air fuel ratio (c) Specific brake fuel consumption (d) Volumetric efficiency

Last Answer : Ans :c

The ratio of the total amount of heat that equipment can remove from the indoors to travel and amount of energy consumed by the equipment is known as A) Energy performance ratio (EPR). C) Energy efficiency RATIO (EER). B) Energy consumption ratio (ECR). D) None of the above

Description : . The ratio of the total amount of heat that equipment can remove from the indoors to travel and amount of energy consumed by the equipment is known as A) Energy performance ratio (EPR). C) Energy efficiency RATIO (EER). B) Energy consumption ratio (ECR). D) None of the above

Last Answer : Energy efficiency RATIO (EER).

Marketing managers at London Equipment Company are involved in establishing marketing performance standards, evaluating performance, and reducing the differences between actual and desired performance. These marketing managers are engaged in A)the marketing control process. B)marketing systems design. C)the marketing audit. D)marketing evaluation.

Description : Marketing managers at London Equipment Company are involved in establishing marketing performance standards, evaluating performance, and reducing the differences between actual and desired performance. These ... process. B)marketing systems design. C)the marketing audit. D)marketing evaluation.

Last Answer : A)the marketing control process.

The tool used for performance assessment and logical evaluation of avenues for improvement in Energy management and audit is a) Fuel substitution c) Energy pricing b) Monitoring and verification d) Bench marking

Description : The tool used for performance assessment and logical evaluation of avenues for improvement in Energy management and audit is a) Fuel substitution c) Energy pricing b) Monitoring and verification d) Bench marking

Last Answer : Bench marking

22. The tool used for performance assessment and logical evaluation of avenues for improvement in Energy management and audit is a) Fuel substitution b) Monitoring and verification c) Energy pricing d) Bench marking 23. Infrared thermometer is used

Description : The tool used for performance assessment and logical evaluation of avenues for improvement in Energy management and audit is a) Fuel substitution b) Monitoring and verification c) Energy pricing d) Bench marking 23. Infrared thermometer is used

Last Answer : Bench marking

Turndown ratio of a burner gives an idea of the __________ in the furnace. (A) Range of fuel firing rates (B) Volume of the combustion chamber (C) Maximum heat input rate only (D) Minimum heat input rate only

Description : Turndown ratio of a burner gives an idea of the __________ in the furnace. (A) Range of fuel firing rates (B) Volume of the combustion chamber (C) Maximum heat input rate only (D) Minimum heat input rate only

Last Answer : (A) Range of fuel firing rates

The advantages of firing pulverised coal in the furnace lies in the fact that, it (A) Permits the use of high ash content coal (B) Permits the use of low fusion point ash coal (C) Accelerates the burning rate and economises on fuel consumption (D) All (A), (B) and (C)

Description : The advantages of firing pulverised coal in the furnace lies in the fact that, it (A) Permits the use of high ash content coal (B) Permits the use of low fusion point ash coal (C) Accelerates the burning rate and economises on fuel consumption (D) All (A), (B) and (C)

Last Answer : (C) Accelerates the burning rate and economises on fuel consumption

Pulverised fuel fired furnaces employ __________ fuel firing. (A) Horizontal (B) Vertical (C) Tangential (D) All (A), (B) and (C)

Description : Pulverised fuel fired furnaces employ __________ fuel firing. (A) Horizontal (B) Vertical (C) Tangential (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The advantage of firing pulverised coal in the furnace lies in the fact, that it (A) Permits the use of high ash content coal (B) Permits the use of low fusion point ash coal(C) Accelerates the burning rate and economises on fuel combustion(D) All (A), (B) and (C)

Description : The advantage of firing pulverised coal in the furnace lies in the fact, that it (A) Permits the use of high ash content coal (B) Permits the use of low fusion point ash coal (C) Accelerates the burning rate and economises on fuel combustion (D) All (A), (B) and (C)

Last Answer : (C) Accelerates the burning rate and economises on fuel combustion

Higher fuel combustion efficiency cannot be achieved by (A) Preheating of fuel gases & combustion air (B) Reducing sulphur content in the fuel (C) Adopting proper fuel firing technique & fuel preparation (D) Supplying correct amount of combustion air

Description : Higher fuel combustion efficiency cannot be achieved by (A) Preheating of fuel gases & combustion air (B) Reducing sulphur content in the fuel (C) Adopting proper fuel firing technique & fuel preparation (D) Supplying correct amount of combustion air

Last Answer : (B) Reducing sulphur content in the fuel

Pick out the wrong statement. (A) Pulverised fuel can be completely burnt with less percentage of excess air compared to lump coal (B) Low grade coal can be used, but generally high volatile matter coals are more suitable for making pulverised fuel (C) Regulation of furnace temperature and atmosphere (oxidising or reducing) is easily possible with pulverised fuel firing (D) None of these

Description : Pick out the wrong statement. (A) Pulverised fuel can be completely burnt with less percentage of excess air compared to lump coal (B) Low grade coal can be used, but generally high volatile ... and atmosphere (oxidising or reducing) is easily possible with pulverised fuel firing (D) None of these

Last Answer : (D) None of these

Major sources of noise in furnace operation arises from air inspirators, combustion, side wall vibrations and fluctuation in the process heat load. A 50% increase in fuel firing rate may increase the furnace noise level by about __________ decibels. (A) 3 (B) 30(C) 7 (D) 70

Description : Major sources of noise in furnace operation arises from air inspirators, combustion, side wall vibrations and fluctuation in the process heat load. A 50% increase in fuel firing rate may increase the furnace noise level by about __________ decibels. (A) 3 (B) 30 (C) 7 (D) 70

Last Answer : (A) 3

What Are Advantages Of Unit (or) Direct System Of Pulverized Fuel Firing?

Description : What Are Advantages Of Unit (or) Direct System Of Pulverized Fuel Firing?

Last Answer : 1. The layout is simple and economical 2. It gives direct control of combustion 3. Coal transportation system is simple 4. Maintenance cost is less

Name The Two Methods Of Pulverized Fuel Firing System?

Description : Name The Two Methods Of Pulverized Fuel Firing System?

Last Answer :  Unit (or) direct system.  Bin (or) central system.

What Is The Difference Between Stocker Firing And Pulverized Fuel Firing?

Description : What Is The Difference Between Stocker Firing And Pulverized Fuel Firing?

Last Answer : The stocker firing method is used for firing solid coal where as pulverized firing method is used for firing pulverized coal.

Which risk is connected to the circumstance outside the project that may influence the scope of work and the performance of the organization? A.Operational Risk B.Financial Risk C.Strategic Risk D.Contextual Risk

Description : Which risk is connected to the circumstance outside the project that may influence the  scope of work and the performance of the organization?  A.Operational Risk  B.Financial Risk  C.Strategic Risk  D.Contextual Risk

Last Answer : D.Contextual Risk

When using a function point estimation worksheet, there are 14 factors that impact the complexity of a project. These factors include _____. a. data communications, time tradeoffs, and estimated effort b. end-user efficiency, data communications, and reusability c. performance and programming language d. reports printed and PCA e. x-rays, extensibility, and operational conversion

Description : When using a function point estimation worksheet, there are 14 factors that impact the complexity of a project. These factors include _____.  a. data communications, time tradeoffs, and ... programming language  d. reports printed and PCA  e. x-rays, extensibility, and operational conversion

Last Answer : b. end-user efficiency, data communications, and reusability

Which of the following types of audits is performed to determine whether an entity's financial statements are fairly stated in conformity with generally accepted accounting principles? a. Operational audit b. Compliance audit c. Performance audit d. Financial statement audit

Description : Which of the following types of audits is performed to determine whether an entity's financial statements are fairly stated in conformity with generally accepted accounting principles? a. Operational audit b. Compliance audit c. Performance audit d. Financial statement audit

Last Answer : Financial statement audit

An objective of a performance audit is to determine whether an entity's a. Operational information is in accordance with government auditing standardsb. Specific operating units arefunctioning economically andefficiently.c. Financial statements present fairly theresults of operations.d. Internal control is adequatelyoperating as designed

Description : An objective of a performance audit is to determine whether an entity's a. Operational information is in accordance with government auditing standards b. Specific operating units are functioning ... present fairly the results of operations. d. Internal control is adequately operating as designed

Last Answer : Specific operating units are functioning economically and efficiently

A typical objective of an operational audit is for the auditor to a. Determine whether the financial statements fairly present the entity's operations. b. Evaluate the feasibility of attaining the entity's operational objectives. c. Make recommendation for improving performance. d. Report on the entity's relative success in maximizing profits

Description : A typical objective of an operational audit is for the auditor to a. Determine whether the financial statements fairly present the entity's operations. b. Evaluate the feasibility of ... recommendation for improving performance. d. Report on the entity's relative success in maximizing profits

Last Answer : Make recommendation for improving performance

Operational audits generally have been conducted by internal and COA auditors, but may be performed by certified public accountants. A primary purpose of an operational audit is to provide: a. A measure of management performance in meeting organizational goalsb. The results of internal examinations of financial and accounting matters to a company's top-level management. c. Aid to the independent-auditor, who is conducting the examination of the financial statements. d. A means of assurance that internal accounting controls are functioning as planned.

Description : Operational audits generally have been conducted by internal and COA auditors, but may be performed by certified public accountants. A primary purpose of an operational audit is to provide: ... statements. d. A means of assurance that internal accounting controls are functioning as planned

Last Answer : A measure of management performance in meeting organizational goals

Which of the following types of audit uses laws and regulations as its criteria? a. Operational audit b. Financial statement audit c. Compliance audit d. Performance audit

Description : Which of the following types of audit uses laws and regulations as its criteria? a. Operational audit b. Financial statement audit c. Compliance audit d. Performance audit

Last Answer : Compliance audit

Which of the following statements is not a distinction between independent auditing and internal auditing? a. Independent auditors represent third party users external to the auditee entity, whereas internal auditors report directly to management. b. Internal auditors are employees of the auditee, whereas independent auditors are independent contractors. c. The internal auditor's span of coverage goes beyond financial auditing to encompass operational and performance auditing. d. Although independent auditors strive for both validity and relevance of evidence, internal auditors are concerned almost exclusively with validity.

Description : Which of the following statements is not a distinction between independent auditing and internal auditing? a. Independent auditors represent third party users external to the auditee entity, ... validity and relevance of evidence, internal auditors are concerned almost exclusively with validity.

Last Answer : Although independent auditors strive for both validity and relevance of evidence, internal auditors are concerned almost exclusively with validity.

An audit designed to evaluate the efficiency and effectiveness of an organization or some or part thereof would not come under the title of a. Performance audit. b. Compliance audit. c. Management audit. d. Operational audit

Description : An audit designed to evaluate the efficiency and effectiveness of an organization or some or part thereof would not come under the title of a. Performance audit. b. Compliance audit. c. Management audit. d. Operational audit

Last Answer : Compliance audit.

Strategic management can be defined as: a) a process of setting written long-term profit plans for the organization. b) a process of measuring performance of the organization. c) a process of operational planning. d) a process of setting long-term direction for the organization

Description : Strategic management can be defined as: a) a process of setting written long-term profit plans for the organization. b) a process of measuring performance of the organization. c) a process of operational planning. d) a process of setting long-term direction for the organization

Last Answer : a process of setting long-term direction for the organization

Code blocks allow many algorithms to be implemented with the following parameters : (A) clarity, elegance, performance (B) clarity, elegance, efficiency (C) elegance, performance, execution (D) execution, clarity, performance

Description : Code blocks allow many algorithms to be implemented with the following parameters : (A) clarity, elegance, performance (B) clarity, elegance, efficiency (C) elegance, performance, execution (D) execution, clarity, performance

Last Answer : (B) clarity, elegance, efficiency

Discuss the effect of transmission line parameters on the performance of transmission line .

Description : Discuss the effect of transmission line parameters on the performance of transmission line .

Last Answer : Following are the effect on performance of transmission line:  1. Due to resistance (R), voltage drop in transmission line produces 2. Due to resistance (R), copper losses in ... voltage regulation of transmission line gets affected 7. Also power factor of transmission line gets affected

Is Allis Chalmers still operational and manufacturing equipment?

Description : Is Allis Chalmers still operational and manufacturing equipment?

Last Answer : The company officially closed in 1998, however Allis-Chalmers Energy still remains in Houston, Texas, and in 2008, Briggs & Stratton announced they would sell lawn tractors under the Allis-Chalmers brand name.

The efficiency of a Carnot engine depends on  (a) working substance  (b) design of engine  (c) size of engine  (d) type of fuel fired  (e) temperatures of source and sink.

Description : The efficiency of a Carnot engine depends on  (a) working substance  (b) design of engine  (c) size of engine  (d) type of fuel fired  (e) temperatures of source and sink.

Last Answer : Answer : e

What test equipment is designed to generate, modify, or measure a range of parameters of electronic functions of a specific nature required to test a single system or equipment?

Description : What test equipment is designed to generate, modify, or measure a range of parameters of electronic functions of a specific nature required to test a single system or equipment?

Last Answer : Special-purpose electronic test equipment.

What Are The Elements Included In Technical And Operational Plans?

Description : What Are The Elements Included In Technical And Operational Plans?

Last Answer : 1. Maintenance philosophy 2. Maintenance load forecasting 3. Maintenance capacity 4. Maintenance scheduling.

Operational factors which affecting thresher preformation. a) Variety of crop, Moisture in crop material b) Feeding chute angle, cylinder type c) Cylinder speed, feed rate d) Cylinder type ,feed rate

Description : Operational factors which affecting thresher preformation. a) Variety of crop, Moisture in crop material b) Feeding chute angle, cylinder type c) Cylinder speed, feed rate d) Cylinder type ,feed rate

Last Answer : Cylinder speed, feed rate

List any four parameters of improving fuel economy.

Description : List any four parameters of improving fuel economy.

Last Answer : 1. Use of multi-functional fuel additives will provide 3 to 4% fuel economy. 2. Good driving habits. 3. Properly maintained fuel supply system. 4. Use of computer controlled fuel ... computer controlled ignition system. 6. Use of higher voltage automotive electrical system (42 volts system).

. For achieving maximum buckling stability use………….parameters. a) location c) quantity b) dimensions d) All of above

Description : . For achieving maximum buckling stability use………….parameters. a) location c) quantity b) dimensions d) All of above

Last Answer : All of above

Isochoric process is one in which  (a) free expansion takes place  (b) very little mechanical work is done by the system  (c) no mechanical work is done by the system  (d) all parameters remain constant

Description : Isochoric process is one in which  (a) free expansion takes place  (b) very little mechanical work is done by the system  (c) no mechanical work is done by the system  (d) all parameters remain constant

Last Answer : Answer : c

Which of the following parameters is constant for a mole for most of the gases at a given temperature and pressure  (a) enthalpy  (b) volume  (c) mass  (d) entropy  (e) specific volume.

Description : Which of the following parameters is constant for a mole for most of the gases at a given temperature and pressure  (a) enthalpy  (b) volume  (c) mass  (d) entropy  (e) specific volume.

Last Answer : Answer : b

To design the buck converter, what are basic & essential information (parameters) we need to get from the Customer?

Description : To design the buck converter, what are basic & essential information (parameters) we need to get from the Customer?

Last Answer : We need the following inputs from the customer,Output Voltage VOUTInput Voltage VINOutput Current (load current) IOUTMaximum Ripple voltage allowed at the output sideEfficiency of the converter

Sommerfeld number is (A) Similar to bearing characteristic number (B) Similar to Reynold’s number (C) Dimensionless parameter that contains all the design parameters (D) Used to find out dynamic load carrying capacity of the hydrodynamic bearing

Description : Sommerfeld number is (A) Similar to bearing characteristic number (B) Similar to Reynold’s number (C) Dimensionless parameter that contains all the design parameters (D) Used to find out dynamic load carrying capacity of the hydrodynamic bearing

Last Answer : (C) Dimensionless parameter that contains all the design parameters

Design Phase consists of ……………………. 1. Identity the functions to be performed 2. Design the input/output and file design 3. Defining basic parameters for system design A) 1 & 2 B) 2 & 3 C) 1 & 3 D) 1, 2 & 3

Description : Design Phase consists of ……………………. 1. Identity the functions to be performed 2. Design the input/output and file design 3. Defining basic parameters for system design A) 1 & 2 B) 2 & 3 C) 1 & 3 D) 1, 2 & 3

Last Answer : D) 1, 2 & 3

Which of the following is the most important deterrents to an extended use of pulverised coal in boiler firing? (A) Ash disposal problem (B) Excessive fly ash discharge from the stack (C) Higher power consumption in its transportation (D) Erosion of induced draft fan blades

Description : Which of the following is the most important deterrents to an extended use of pulverised coal in boiler firing? (A) Ash disposal problem (B) Excessive fly ash discharge from the stack (C) Higher power consumption in its transportation (D) Erosion of induced draft fan blades

Last Answer : (A) Ash disposal problem

Which of the following is the most important deterrents to an extended use of pulverised coal in boiler firing? (A) Ash disposal problem (B) Excessive fly-ash discharge from the stack (C) High power consumption in its transportation (D) Erosion of induced draft fan blades

Description : Which of the following is the most important deterrents to an extended use of pulverised coal in boiler firing? (A) Ash disposal problem (B) Excessive fly-ash discharge from the stack (C) High power consumption in its transportation (D) Erosion of induced draft fan blades

Last Answer : (A) Ash disposal problem

Disposal of radioactive waste materials and spent fuel is a major and important technology. How the waste radioactive material is disposed off ?

Description : Disposal of radioactive waste materials and spent fuel is a major and important technology. How the waste radioactive material is disposed off ?

Last Answer : Nonusable fission products are radioactive and take short/medium/long time for radioactive decay to reach safe level of radioactivity. Accordingly three methods of disposal are : (a) Zero or low ... are stored in water for several months to permit radioactive decay to an accepetable low level.

Which of the following is least important in design during rapid prototyping? a.Machine size b.Tolerance c.Material d.CAD software

Description : Which of the following is least important in design during rapid prototyping? a.Machine size b.Tolerance c.Material d.CAD software

Last Answer : b.Tolerance

The most important function of operational audit report is to: a. Direct management to take specified actions. b. State the auditor’s opinion or conclusion. c. Report findings and recommendations. d. Report the objective of the audit

Description : The most important function of operational audit report is to: a. Direct management to take specified actions. b. State the auditor’s opinion or conclusion. c. Report findings and recommendations. d. Report the objective of the audit

Last Answer : Report findings and recommendations.