A binary mixture of benzene and cyclohexane is separated by
(A) Flash vaporisation
(B) Extractive distillation
(C) Solvent extraction
(D) Ordinary distillation
Description : Pick out the correct statement. (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of ... Flash distillation is suitable for separating components which have very close boiling temperature
Last Answer : (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of nonideal binary system by distillation
Description : In case of __________ distillation, a solvent is added to alter the relative volatility of the mixture to be separated. (A) Molecular (B) Azeotropic (C) Extractive
Last Answer : (C) Extractive
Description : Components, having widely different boiling point in a binary mixture, can be separated using __________ distillation. (A) Molecular (B) Extractive (C) Steam (D) Simple
Last Answer : (D) Simple
Description : Essential oils are usually obtained using (A) Steam distillation (B) Extractive distillation (C) Solvent extraction (D) Leaching
Last Answer : (D) Leaching
Description : Penicillin is separated from fermented broth by (A) Extraction with amyl or butyl acetate (B) Ternary Azeotropic distillation (C) Evaporator in calandria (D) Extractive distillation
Last Answer : (A) Extraction with amyl or butyl acetate
Description : The solvent used in liquid extraction should not have high latent heat of vaporisation, because (A) The pressure drop and hence the pumping cost will be very high (B) It cannot ... by distillation may be prohibitively high (D) It will decompose while recovering by distillation
Last Answer : (C) Its recovery cost by distillation may be prohibitively high
Description : Heat sensitive materials with very high latent heat of vaporisation may be economically separated using (A) Liquid extraction (B) Distillation (C) Evaporation (D) Absorption
Last Answer : (A) Liquid extraction
Description : In extractive distillation, solvent is (A) Added to alter the relative volatility of the mixture (B) Of high volatility (C) Present in overhead stream (D) Of high viscosity to give high tray efficiency
Last Answer : (A) Added to alter the relative volatility of the mixture
Description : Acetic acid will be most economically separated from a dilute solution of acetic acid in water by (A) Solvent extraction (B) Continuous distillation (C) Evaporation (D) Absorption
Last Answer : (A) Solvent extraction
Description : Solvent used in extractive distillation (A) Changes the relative volatility of the original components (B) Should be of high volatility (C) Should form azeotropes with the original components (D) All (A), (B) and (C)
Last Answer : (A) Changes the relative volatility of the original components
Description : Solvent used in extractive distillation (A) Is of low volatility (B) Forms a low boiling azeotrope (C) Forms a high boiling azeotrope (D) Does not alter the relative volatility of the original components
Last Answer : (B) Forms a low boiling azeotrope
Description : Extraction of coffee from its seed is done by (A) Liquid-liquid extraction (B) Leaching (C) Extractive distillation (D) Steam distillation
Last Answer : (B) Leaching
Description : Black liquor is converted into white liquor by (A) Evaporation and burning the concentrate followed by causticisation of products (B) Multi-effect evaporation only (C) Selective liquid extraction (D) Extractive distillation
Last Answer : (A) Evaporation and burning the concentrate followed by causticisation of products
Description : Glycerine is recovered from lye by (A) Evaporation followed by vacuum distillation (B) Liquid extraction technique (C) Extractive distillation technique (D) None of these
Last Answer : (A) Evaporation followed by vacuum distillation
Description : Resorcinol on distillation with zinc dust gives (a) Benzene (b) Cyclohexane (c) Toluene (d) m-Xylene
Last Answer : Benzene
Description : Pick out the wrong statement. (A) Constant pressure distillation cannot separate an Azeotropic mixture (B) Relative volatility of a binary mixture changes appreciably with the minor change in ... unity (D) Flash distillation is practised on wide spread scale in petroleum refinery
Last Answer : (B) Relative volatility of a binary mixture changes appreciably with the minor change in temperature
Description : Entrainer used in Azeotropic distillation should (A) Form a low boiling azeotrope with one of the constituents of the mixture (B) Form a new azeotrope of low relative volatility with one of the ... (C) Have high latent heat of vaporisation (D) Have high viscosity to provide high tray efficiency
Last Answer : (A) Form a low boiling azeotrope with one of the constituents of the mixture
Description : In which of the following unit operations, the selectivity is an important parameter? (A) Distillation (B) Solvent extraction (C) Absorption (D) None of these
Last Answer : (B) Solvent extraction
Description : Pick out the wrong statement. (A) In solvent extraction, the distribution co-efficient should be as large as possible for solvent economy (B) With increase in pressure, the solubility of ... in distillation column (D) The capacity of a distillation column is maximum at total reflux
Last Answer : (D) The capacity of a distillation column is maximum at total reflux
Description : Steady state equimolal counter diffusion occurs in case of (A) Leaching (B) Absorption (C) Binary phase distillation (D) Liquid-liquid extraction
Last Answer : (C) Binary phase distillation
Description : Pick out the wrong statement. (A) With decrease in feed temperature, the number of plates required for binary distillation decreases for a given L/V' ratio (B) The extraction per unit ... and its crosssection is wider at the bottom (D) Vander wall adsorption is also called chemisorption
Last Answer : (D) Vander wall adsorption is also called chemisorption
Description : Flash distillation is suitable for separating the constituents of a binary system, which (A) Form minimum boiling azeotrope (B) Have very wide boiling points (C) Have very close boiling points (D) Form constant boiling azeotrope
Last Answer : (B) Have very wide boiling points
Description : Flash distillation is (A) Same as differential distillation (B) Used for multi-component systems like crude refining (C) Same as simple distillation (D) Most useful for handling binary systems
Last Answer : (B) Used for multi-component systems like crude refining
Description : Fenske equation for determining the minimum number of theoretical stages in distillation column holds good, when the (A) Relative volatility is reasonably constant (B) Mixture (to be separated) ... (to be separated) shows positive deviation from ideality (D) Multi-component distillation is involved
Last Answer : (A) Relative volatility is reasonably constant
Description : Steam distillation is not recommended to be used, if the (A) Azeotropic mixture is to be separated and the final product is miscible with water (B) Liquids decompose, if ... unstable or has the tendency to react with other components associated with it, at the boiling temperature
Last Answer : (A) Azeotropic mixture is to be separated and the final product is miscible with water
Description : Solvent used in duo-sol extraction for lube oil upgradation is a mixture of (A) Propane & phenol-cresol mixture (B) Methyl ethyl ketone & glycol (C) Phenol & furfural (D) Propane & liquid sulphur dioxide
Last Answer : (A) Propane & phenol-cresol mixture
Description : In a single stage extraction process, 10 kg of pure solvent S (containing no solute A) is mixed with 30 kg of feed F containing A at a mass fraction xf = 0.2. The mixture splits into an extract phase E and a raffinate ... phase is (in Kg) (A) 6.89 (B) 8.89 (C) 10 (D) 8.25
Last Answer : (B) 8.89
Description : The starting material used for the manufacture of caprolactam is (A) Ethyl benzene (B) Cyclohexane (C) Ethylene glycol (D) DMT
Last Answer : (B) Cyclohexane
Description : Rose oil is extracted from rose leaves using __________ distillation. (A) High pressure (B) Low pressure (C) Extractive (D) Steam
Last Answer : (D) Steam
Description : ADDUCTS' and 'CLATHRATES' are used in case of (A) Extractive distillation (B) Crystallisation (C) Absorption (D) None of these
Last Answer : (B) Crystallisation
Description : Alcohol is dehydrated using __________ distillation. (A) Extractive (B) Azeotropic (C) Steam (D) Molecular
Last Answer : (B) Azeotropic
Description : Polar organic compounds are normally used as separating agents for the azeotropic and extractive distillation. Which of the following is the most important factor to be considered for the choice of the separating agent ... ? (A) Cost (B) Availability (C) Toxicity (D) Selectivity
Last Answer : (D) Selectivity
Description : Duhring's plot' is of use in (A) Extractive distillation (B) Evaporation
Last Answer : (B) Evaporation
Description : Benzoic acid and diphenyl ketone are both solids insoluble in water. A mixture of these compounds can be separated if we (a) add the mixture to a solution of NaOH in water, and filter. (b) add ... benzene. (d) It is impossible to separate a mixture of two solids when both are insoluble in water.
Last Answer : add the mixture to a solution of NaOH in water, and filter
Description : Consider the following statements: 1. Carbyne is an allotrope of carbon. 2. Gasoline, used as a fuel in motor vehicles is a mixture of petrol and alcohol. 3. Petroleum is also known as 'liquid gold'. 4. The various components of crude ... (b) 1, 3 and 4 only (c) 1, 2, 3 and 4 (d) 1, 2 and 3 only
Last Answer : Ans:(b)
Description : A mixture of water and alcohol can be separated by – (1) Filtration (2) Evaporation (3) Decantation (4) Distillation
Last Answer : (4) Distillation Explanation: A mixture of water and alcohol is separated by the process of distillation. At 780C, alcohol starts to vaporize. The vapours are condensed in the condenser and alcohol is collected in the receiver.
Description : Iodine can be separated from a mixture of Iodine and Potassium Chloride by - (1) Filtration (2) Sublimation (3) Distillation (4) Sedimentation
Last Answer : (2) Sublimation Explanation: Iodine can be separated from a mixture of Iodine and Potassium Chloride by Sublimation. Sublimation is the transition of a substance directly from the solid to the gas phase, without passing through the intermediate liquid phase.
Description : Iodine can be separated from a mixture of Iodine and Potassium Chloride by – (1) sedimentation (2) filtration (3) sublimation (4) distillation
Last Answer : (3) sublimation Explanation: Iodine is well known to sublime (change from solid to gas without becoming liquid in between) when heated. However sodium chloride has a melting point much higher ... by using a sublimation apparatus, with solid iodine collected by condensation on a cold surface.
Description : Water can be separated from alcohol water mixture by – (1) decantation (2) evaporation (3) distillation (4) sublimation
Last Answer : (3) distillation Explanation: Distillation is a method of separating mixtures based on differences in volatilities of components in a boiling liquid mixture. Distillation is a unit operation, or a ... is distilled to separate its components- notably oxygen, nitrogen, and argon- for industrial use.
Description : A mixture of water and alcohol can be separated by - (1) Filtration (2) Evaporation (3) Distillation (4) Decantation
Last Answer : (3) Distillation Explanation: Simple distillation is a procedure by which two liquids with different boiling points can be separated.
Description : A mixture of water and alcohol can be separated by (1) Filtration (2) Evaporation (3) Decantation (4) Distillation
Last Answer : Distillation
Description : Iodine can be separated from a mixture of Iodine and Potassium Chloride by (1) sedimentation (2) filtration (3) sublimation (4) distillation
Last Answer : sublimation
Description : Water can be separated from alcohol water mixture by (1) decantation (2) evaporation (3) distillation (4) sublimation
Last Answer : distillation
Description : The-relative volatility for separation of a non-ideal binary mixture by distillation should be (A) 0 (B) 1 (C) > 1 (D) < 1
Last Answer : (C) > 1
Description : Pick out the correct statement. (A) Higher hold up of the solid in the rotary dryer results in better exposure of the solids to the gas (B) The 'Hatta number' is ... reflux in case of distillation operation requires infinite number of plates for a binary system separation
Last Answer : (C) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is linear in the case of steady state equimolal counter-diffusion
Description : Steady state equimolal counter diffusion is encountered in (A) Separation of a binary mixture by distillation (B) Absorption of NH3 from air by water (C) All liquid-liquid diffusion systems (D) All liquid-solid diffusion systems
Last Answer : (A) Separation of a binary mixture by distillation
Description : For a binary mixture with low relative volatility, (A) Use steam distillation (B) Use molecular distillation (C) Use high pressure distillation (D) An azeotrope may be formed during distillation
Last Answer : (D) An azeotrope may be formed during distillation
Description : For a binary mixture distillation process, the degree of freedom is 2. However, if the pressure is fixed in this process, the number of independent variables in this process will be (A) 1 (B) 0 (C) 2 (D) 3
Last Answer : (A) 1
Description : According to the Fenske equation, what will be the minimum number of plates required in a distillation column to separate an equimolar binary mixture of components A and B into an overhead fraction containing 99 mol% A and a ... in the column. (A) 5 (B) 9 (C) 12 (D) 28
Last Answer : (C) 12
Description : Benzene reacts with H2 at 150°C at 30 atm in the presence of Ni catalyst to give (a) Cyclohexane (b) Cyclohexene (c) n-Hexane (d) No reaction occurs
Last Answer : Cyclohexane