Black liquor is converted into white liquor by (A) Evaporation and burning the concentrate followed by causticisation of products (B) Multi-effect evaporation only (C) Selective liquid extraction (D) Extractive distillation

Black liquor is converted into white liquor by
(A) Evaporation and burning the concentrate followed by causticisation of
products
(B) Multi-effect evaporation only
(C) Selective liquid extraction
(D) Extractive distillation
by

1 Answer

Answer :

(A) Evaporation and burning the concentrate followed by causticisation of
products
by

Related questions

Glycerine is recovered from lye by (A) Evaporation followed by vacuum distillation (B) Liquid extraction technique (C) Extractive distillation technique (D) None of these

Description : Glycerine is recovered from lye by (A) Evaporation followed by vacuum distillation (B) Liquid extraction technique (C) Extractive distillation technique (D) None of these

Last Answer : (A) Evaporation followed by vacuum distillation

Extraction of coffee from its seed is done by (A) Liquid-liquid extraction (B) Leaching (C) Extractive distillation (D) Steam distillation

Description : Extraction of coffee from its seed is done by (A) Liquid-liquid extraction (B) Leaching (C) Extractive distillation (D) Steam distillation

Last Answer : (B) Leaching

Duhring's plot' is of use in (A) Extractive distillation (B) Evaporation

Description : Duhring's plot' is of use in (A) Extractive distillation (B) Evaporation

Last Answer : (B) Evaporation

A binary mixture of benzene and cyclohexane is separated by (A) Flash vaporisation (B) Extractive distillation (C) Solvent extraction (D) Ordinary distillation

Description : A binary mixture of benzene and cyclohexane is separated by (A) Flash vaporisation (B) Extractive distillation (C) Solvent extraction (D) Ordinary distillation

Last Answer : (B) Extractive distillation

Essential oils are usually obtained using (A) Steam distillation (B) Extractive distillation (C) Solvent extraction (D) Leaching

Description : Essential oils are usually obtained using (A) Steam distillation (B) Extractive distillation (C) Solvent extraction (D) Leaching

Last Answer : (D) Leaching

Penicillin is separated from fermented broth by (A) Extraction with amyl or butyl acetate (B) Ternary Azeotropic distillation (C) Evaporator in calandria (D) Extractive distillation

Description : Penicillin is separated from fermented broth by (A) Extraction with amyl or butyl acetate (B) Ternary Azeotropic distillation (C) Evaporator in calandria (D) Extractive distillation

Last Answer : (A) Extraction with amyl or butyl acetate

Heat sensitive materials with very high latent heat of vaporisation may be economically separated using (A) Liquid extraction (B) Distillation (C) Evaporation (D) Absorption

Description : Heat sensitive materials with very high latent heat of vaporisation may be economically separated using (A) Liquid extraction (B) Distillation (C) Evaporation (D) Absorption

Last Answer : (A) Liquid extraction

The recovery of penicillin from the acidified fermentation broth is done by (A) Distillation (B) Evaporation (C) Absorption (D) Liquid extraction

Description : The recovery of penicillin from the acidified fermentation broth is done by (A) Distillation (B) Evaporation (C) Absorption (D) Liquid extraction

Last Answer : (D) Liquid extraction

The most important application of distribution law is in (A) Evaporation (B) Liquid extraction (C) Drying (D) Distillation

Description : The most important application of distribution law is in (A) Evaporation (B) Liquid extraction (C) Drying (D) Distillation

Last Answer : (B) Liquid extraction

Which of the following unit operations makes use of Thiele-Geddes equation? (A) Liquid-liquid extraction (B) Solid-liquid extraction (C) Multi-component absorption with chemical reaction (D) Multi-component distillation

Description : Which of the following unit operations makes use of Thiele-Geddes equation? (A) Liquid-liquid extraction (B) Solid-liquid extraction (C) Multi-component absorption with chemical reaction (D) Multi-component distillation

Last Answer : (D) Multi-component distillation

Black liquor generated during paper manufacture is concentrated in a (A) Single effect evaporator (B) Single effect evaporator followed by a crystalliser (C) Multiple effect evaporator (D) Multiple effect evaporators followed by a crystalliser

Description : Black liquor generated during paper manufacture is concentrated in a (A) Single effect evaporator (B) Single effect evaporator followed by a crystalliser (C) Multiple effect evaporator (D) Multiple effect evaporators followed by a crystalliser

Last Answer : (C) Multiple effect evaporator

Acetic acid will be most economically separated from a dilute solution of acetic acid in water by (A) Solvent extraction (B) Continuous distillation (C) Evaporation (D) Absorption

Description : Acetic acid will be most economically separated from a dilute solution of acetic acid in water by (A) Solvent extraction (B) Continuous distillation (C) Evaporation (D) Absorption

Last Answer : (A) Solvent extraction

Vacuum is generally maintained in the vapour space of an evaporator mainly to (A) Get economical temperature difference by using moderate pressure steam (B) Facilitate forward feeding in multiple effect evaporation (C) Concentrate heat sensitive materials (D) Achieve very high concentration of the final product

Description : Vacuum is generally maintained in the vapour space of an evaporator mainly to (A) Get economical temperature difference by using moderate pressure steam (B) Facilitate forward ... (C) Concentrate heat sensitive materials (D) Achieve very high concentration of the final product

Last Answer : (A) Get economical temperature difference by using moderate pressure steam

Multiple effect evaporation is generally recommended, when the (A) Large scale evaporation of liquor is needed (B) Corrosive liquids are to be concentrated

Description : Multiple effect evaporation is generally recommended, when the (A) Large scale evaporation of liquor is needed (B) Corrosive liquids are to be concentrated

Last Answer : (A) Large scale evaporation of liquor is needed

Solvent used in extractive distillation (A) Changes the relative volatility of the original components (B) Should be of high volatility (C) Should form azeotropes with the original components (D) All (A), (B) and (C)

Description : Solvent used in extractive distillation (A) Changes the relative volatility of the original components (B) Should be of high volatility (C) Should form azeotropes with the original components (D) All (A), (B) and (C)

Last Answer : (A) Changes the relative volatility of the original components

In extractive distillation, solvent is (A) Added to alter the relative volatility of the mixture (B) Of high volatility (C) Present in overhead stream (D) Of high viscosity to give high tray efficiency

Description : In extractive distillation, solvent is (A) Added to alter the relative volatility of the mixture (B) Of high volatility (C) Present in overhead stream (D) Of high viscosity to give high tray efficiency

Last Answer : (A) Added to alter the relative volatility of the mixture

Solvent used in extractive distillation (A) Is of low volatility (B) Forms a low boiling azeotrope (C) Forms a high boiling azeotrope (D) Does not alter the relative volatility of the original components

Description : Solvent used in extractive distillation (A) Is of low volatility (B) Forms a low boiling azeotrope (C) Forms a high boiling azeotrope (D) Does not alter the relative volatility of the original components

Last Answer : (B) Forms a low boiling azeotrope

Components, having widely different boiling point in a binary mixture, can be separated using __________ distillation. (A) Molecular (B) Extractive (C) Steam (D) Simple

Description : Components, having widely different boiling point in a binary mixture, can be separated using __________ distillation. (A) Molecular (B) Extractive (C) Steam (D) Simple

Last Answer : (D) Simple

In case of __________ distillation, a solvent is added to alter the relative volatility of the mixture to be separated. (A) Molecular (B) Azeotropic (C) Extractive

Description : In case of __________ distillation, a solvent is added to alter the relative volatility of the mixture to be separated. (A) Molecular (B) Azeotropic (C) Extractive

Last Answer : (C) Extractive

Rose oil is extracted from rose leaves using __________ distillation. (A) High pressure (B) Low pressure (C) Extractive (D) Steam

Description : Rose oil is extracted from rose leaves using __________ distillation. (A) High pressure (B) Low pressure (C) Extractive (D) Steam

Last Answer : (D) Steam

ADDUCTS' and 'CLATHRATES' are used in case of (A) Extractive distillation (B) Crystallisation (C) Absorption (D) None of these

Description : ADDUCTS' and 'CLATHRATES' are used in case of (A) Extractive distillation (B) Crystallisation (C) Absorption (D) None of these

Last Answer : (B) Crystallisation

Pick out the correct statement. (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of non￾ideal binary system by distillation (B) A sharp decrease in pressure drop is an indication of flooding in a distillation coloumn (C) Solvent used in extractive distillation should be of high volatility (D) Flash distillation is suitable for separating components which have very close boiling temperature

Description : Pick out the correct statement. (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of ... Flash distillation is suitable for separating components which have very close boiling temperature

Last Answer : (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of non￾ideal binary system by distillation

Alcohol is dehydrated using __________ distillation. (A) Extractive (B) Azeotropic (C) Steam (D) Molecular

Description : Alcohol is dehydrated using __________ distillation. (A) Extractive (B) Azeotropic (C) Steam (D) Molecular

Last Answer : (B) Azeotropic

Polar organic compounds are normally used as separating agents for the azeotropic and extractive distillation. Which of the following is the most important factor to be considered for the choice of the separating agent for extractive distillation? (A) Cost (B) Availability(C) Toxicity(D) Selectivity

Description : Polar organic compounds are normally used as separating agents for the azeotropic and extractive distillation. Which of the following is the most important factor to be considered for the choice of the separating agent ... ? (A) Cost (B) Availability (C) Toxicity (D) Selectivity

Last Answer : (D) Selectivity

Separation of two or more components of a liquid solution cannot beachieved by (A) Fractional crystallisation (B) Liquid extraction (C) Absorption (D) Evaporation

Description : Separation of two or more components of a liquid solution cannot beachieved by (A) Fractional crystallisation (B) Liquid extraction (C) Absorption (D) Evaporation

Last Answer : (C) Absorption

Steady state equimolal counter diffusion occurs in case of (A) Leaching (B) Absorption (C) Binary phase distillation (D) Liquid-liquid extraction

Description : Steady state equimolal counter diffusion occurs in case of (A) Leaching (B) Absorption (C) Binary phase distillation (D) Liquid-liquid extraction

Last Answer : (C) Binary phase distillation

Pick out the wrong statement. (A) Critical moisture content is not a property of the material itself (B) A sharp increase in pressure drop gives an indication of the flooding in a distillation column (C) Separation of components is not possible in liquid extraction, if selectivity is unity (D) Dehydration of ethyl alcohol is most economically done by molecular distillation at very high vacuum

Description : Pick out the wrong statement. (A) Critical moisture content is not a property of the material itself (B) A sharp increase in pressure drop gives an indication of the flooding in a ... unity (D) Dehydration of ethyl alcohol is most economically done by molecular distillation at very high vacuum

Last Answer : (D) Dehydration of ethyl alcohol is most economically done by molecular distillation at very high vacuum

Pick out the wrong statement. (A) With decrease in feed temperature, the number of plates required for binary distillation decreases for a given ‘L/V’ ratio (B) The extraction per unit of total height for a short packed column is more effective than for a tall column, in case of liquid-liquid extraction(C) Natural draft cooling towers are made of ferroconcrete and its cross￾section is wider at the bottom(D) Vander wall adsorption is also called chemisorption

Description : Pick out the wrong statement. (A) With decrease in feed temperature, the number of plates required for binary distillation decreases for a given L/V' ratio (B) The extraction per unit ... and its cross￾section is wider at the bottom (D) Vander wall adsorption is also called chemisorption

Last Answer : (D) Vander wall adsorption is also called chemisorption

The solvent used in liquid extraction should not have high latent heat of vaporisation, because (A) The pressure drop and hence the pumping cost will be very high (B) It cannot be recovered by distillation (C) Its recovery cost by distillation may be prohibitively high (D) It will decompose while recovering by distillation

Description : The solvent used in liquid extraction should not have high latent heat of vaporisation, because (A) The pressure drop and hence the pumping cost will be very high (B) It cannot ... by distillation may be prohibitively high (D) It will decompose while recovering by distillation

Last Answer : (C) Its recovery cost by distillation may be prohibitively high

Pick out the wrong statement. (A) 'Green acid' is the other name of phosphoric acid produced by the reaction of phosphate rock & sulphuric acid (B) Chemically unreactive nature of red phosphorous is due to its polymeric structure (C) Red phosphorous is the most reactive allotropic form of phosphorous (D) Red phosphorous, which is used in the manufacture of safety matches, is converted into white phosphorous by vaporisation followed by condensation

Description : Pick out the wrong statement. (A) 'Green acid' is the other name of phosphoric acid produced by the reaction of phosphate rock & sulphuric acid (B) Chemically unreactive nature of ... in the manufacture of safety matches, is converted into white phosphorous by vaporisation followed by condensation

Last Answer : (C) Red phosphorous is the most reactive allotropic form of phosphorous

Pick out the wrong statement. (A) For the manufacture of styrene, the major raw materials are benzene and ethylene (B) One important copolymer of styrene is SBR, which is widely used in the manufacture of automobile tyres (C) Manufacture of phenol by chloroben-zene-eaustic process involves. The chlorination of benzene, causticisation and hydrolysis (D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available

Description : Pick out the wrong statement. (A) For the manufacture of styrene, the major raw materials are benzene and ethylene (B) One important copolymer of styrene is SBR, which is widely ... D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available

Last Answer : (D) Phenol manufacture by chlorobenzene-caustic process is competitive even when low cost chlorine is not available

Tall oil obtained as a by-product from the black liquor recovery is (A) A black, sticky & viscous liquid (B) Used in the manufacture of greases, emulsions & soaps (C) Composed mainly of rosin & fatty acids (D) All (A), (B) & (C)

Description : Tall oil obtained as a by-product from the black liquor recovery is (A) A black, sticky & viscous liquid (B) Used in the manufacture of greases, emulsions & soaps (C) Composed mainly of rosin & fatty acids (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

In the Kraft process of sulphate paper pulp manufacture, the black liquor and the white liquor storage tank is made of (A) Concrete (B) Wood (C) Steel (D) Porcelain

Description : In the Kraft process of sulphate paper pulp manufacture, the black liquor and the white liquor storage tank is made of (A) Concrete (B) Wood (C) Steel (D) Porcelain

Last Answer : (C) Steel

Consider the following processes: 1. Evaporation 2. Fractional distillation 3. Distillation 4. Filtration The process(es) involved in the refining of crude oil is/ are: (a) 3 only (b) 2 and 3 (c) 3 only (d) 1 only

Description : Consider the following processes: 1. Evaporation 2. Fractional distillation 3. Distillation 4. Filtration The process(es) involved in the refining of crude oil is/ are: (a) 3 only (b) 2 and 3 (c) 3 only (d) 1 only

Last Answer : Ans:(b)

Identify the correct statement with reference to the extractive metallurgy of aluminium. (A) The electrolyte consists of molten Na3AlF6 with approximately 1 to 8% Al2O3 (B) Approximately 80% of the aluminium deposited on the cathode comes from cryolite (C) Sodium is deposited along with aluminium, but is immediately vaporised (D) Anode effect sets in when the cryolite concentration goes below 40%.

Description : Identify the correct statement with reference to the extractive metallurgy of aluminium. (A) The electrolyte consists of molten Na3AlF6 with approximately 1 to 8% Al2O3 (B) Approximately 80% of ... is immediately vaporised (D) Anode effect sets in when the cryolite concentration goes below 40%.

Last Answer : (A) The electrolyte consists of molten Na3AlF6 with approximately 1 to 8% Al2O3

Pick out the wrong statement. (A) In case of heat transfer by purely forced convection, GR /Re 2 ≤ 1 (B) The equivalent diameter of heat transfer for a duct of square cross￾section (having each side as 'x') is equal to 4x (C) Distillation process is not the same as evaporation (D) The effectiveness of nucleate boiling depends basically on the ease with which the bubbles are formed and detached from the heating surface

Description : Pick out the wrong statement. (A) In case of heat transfer by purely forced convection, GR /Re 2 ≤ 1 (B) The equivalent diameter of heat transfer for a duct of ... nucleate boiling depends basically on the ease with which the bubbles are formed and detached from the heating surface

Last Answer : (B) The equivalent diameter of heat transfer for a duct of square cross￾section (having each side as 'x') is equal to 4x

Duhring’s rule is important in solving problems on (A) Distillation (B) Crystallisation (C) Evaporation (D) Humidification

Description : Duhring’s rule is important in solving problems on (A) Distillation (B) Crystallisation (C) Evaporation (D) Humidification

Last Answer : (C) Evaporation

Pick out the wrong statement. (A) The value of hydrostatic head increases with increase in vacuum in the effect in a multiple effect evaporator system (B) Entering velocity of the liquid in the tubes of natural circulation evaporators is in the range of 0.3 to 0.9 metre/second (C) Duhring's plot is used for calculating the concentration of solution (D) In a multiple effect evaporation system, the number of effects is limited by the total boiling point rise

Description : Pick out the wrong statement. (A) The value of hydrostatic head increases with increase in vacuum in the effect in a multiple effect evaporator system (B) Entering velocity of the liquid in ... a multiple effect evaporation system, the number of effects is limited by the total boiling point rise

Last Answer : (C) Duhring's plot is used for calculating the concentration of solution

In coal washeries, three products namely the valuable product (i.e. clean/washed coal), discarded product (i.e. mineral matter) and an additional concentrated product called __________ is produced. (A) Concentrate (B) Tailing (C) Middling (D) None of these

Description : In coal washeries, three products namely the valuable product (i.e. clean/washed coal), discarded product (i.e. mineral matter) and an additional concentrated product called __________ is produced. (A) Concentrate (B) Tailing (C) Middling (D) None of these

Last Answer : (C) Middling

In which of the following unit operations, the selectivity is an important parameter? (A) Distillation (B) Solvent extraction (C) Absorption (D) None of these

Description : In which of the following unit operations, the selectivity is an important parameter? (A) Distillation (B) Solvent extraction (C) Absorption (D) None of these

Last Answer : (B) Solvent extraction

Pick out the wrong statement. (A) In solvent extraction, the distribution co-efficient should be as large as possible for solvent economy (B) With increase in pressure, the solubility of gases in solvent increases at a fixed temperature (C) Decrease in Murphree plate efficiency is an indication of entrainment in distillation column (D) The capacity of a distillation column is maximum at total reflux

Description : Pick out the wrong statement. (A) In solvent extraction, the distribution co-efficient should be as large as possible for solvent economy (B) With increase in pressure, the solubility of ... in distillation column (D) The capacity of a distillation column is maximum at total reflux

Last Answer : (D) The capacity of a distillation column is maximum at total reflux

Metal cutting by oxy-acetylene flame is accomplished by the __________ of the metal. (A) Burning (B) Intensive oxidation (C) Evaporation (D) None of these

Description : Metal cutting by oxy-acetylene flame is accomplished by the __________ of the metal. (A) Burning (B) Intensive oxidation (C) Evaporation (D) None of these

Last Answer : Option B

Langmuir equation is associated with (A) Leaching (B) Adsorption (C) Steam distillation (D) Multi-component absorption

Description : Langmuir equation is associated with (A) Leaching (B) Adsorption (C) Steam distillation (D) Multi-component absorption

Last Answer : (B) Adsorption

Fenske equation for determining the minimum number of theoretical stages in distillation column holds good, when the (A) Relative volatility is reasonably constant (B) Mixture (to be separated) shows negative deviation from ideality (C) Mixture (to be separated) shows positive deviation from ideality (D) Multi-component distillation is involved

Description : Fenske equation for determining the minimum number of theoretical stages in distillation column holds good, when the (A) Relative volatility is reasonably constant (B) Mixture (to be separated) ... (to be separated) shows positive deviation from ideality (D) Multi-component distillation is involved

Last Answer : (A) Relative volatility is reasonably constant

Use of packed towers for distillation is generally limited to the (A) Small sizes (B) Multi-component distillation (C) High pressure operation (D) Vacuum distillation

Description : Use of packed towers for distillation is generally limited to the (A) Small sizes (B) Multi-component distillation (C) High pressure operation (D) Vacuum distillation

Last Answer : (A) Small sizes

The Hatta number is important in (A) Multi-component distillation (B) Binary distillation (C) Gas absorption without chemical reaction (D) Gas absorption with chemical reaction

Description : The Hatta number is important in (A) Multi-component distillation (B) Binary distillation (C) Gas absorption without chemical reaction (D) Gas absorption with chemical reaction

Last Answer : (D) Gas absorption with chemical reaction

Flash distillation is (A) Same as differential distillation (B) Used for multi-component systems like crude refining (C) Same as simple distillation (D) Most useful for handling binary systems

Description : Flash distillation is (A) Same as differential distillation (B) Used for multi-component systems like crude refining (C) Same as simple distillation (D) Most useful for handling binary systems

Last Answer : (B) Used for multi-component systems like crude refining

A mixture of water and alcohol can be separated by – (1) Filtration (2) Evaporation (3) Decantation (4) Distillation

Description : A mixture of water and alcohol can be separated by – (1) Filtration (2) Evaporation (3) Decantation (4) Distillation

Last Answer : (4) Distillation Explanation: A mixture of water and alcohol is separated by the process of distillation. At 780C, alcohol starts to vaporize. The vapours are condensed in the condenser and alcohol is collected in the receiver.

Water can be separated from alcohol water mixture by – (1) decantation (2) evaporation (3) distillation (4) sublimation

Description : Water can be separated from alcohol water mixture by – (1) decantation (2) evaporation (3) distillation (4) sublimation

Last Answer : (3) distillation Explanation: Distillation is a method of separating mixtures based on differences in volatilities of components in a boiling liquid mixture. Distillation is a unit operation, or a ... is distilled to separate its components- notably oxygen, nitrogen, and argon- for industrial use.