Description : Pick out the wrong statement. (A) The value of hydrostatic head increases with increase in vacuum in the effect in a multiple effect evaporator system (B) Entering velocity of the liquid in ... a multiple effect evaporation system, the number of effects is limited by the total boiling point rise
Last Answer : (C) Duhring's plot is used for calculating the concentration of solution
Description : Duhring’s rule is important in solving problems on (A) Distillation (B) Crystallisation (C) Evaporation (D) Humidification
Last Answer : (C) Evaporation
Description : Black liquor is converted into white liquor by (A) Evaporation and burning the concentrate followed by causticisation of products (B) Multi-effect evaporation only (C) Selective liquid extraction (D) Extractive distillation
Last Answer : (A) Evaporation and burning the concentrate followed by causticisation of products
Description : Glycerine is recovered from lye by (A) Evaporation followed by vacuum distillation (B) Liquid extraction technique (C) Extractive distillation technique (D) None of these
Last Answer : (A) Evaporation followed by vacuum distillation
Description : Solvent used in extractive distillation (A) Changes the relative volatility of the original components (B) Should be of high volatility (C) Should form azeotropes with the original components (D) All (A), (B) and (C)
Last Answer : (A) Changes the relative volatility of the original components
Description : In extractive distillation, solvent is (A) Added to alter the relative volatility of the mixture (B) Of high volatility (C) Present in overhead stream (D) Of high viscosity to give high tray efficiency
Last Answer : (A) Added to alter the relative volatility of the mixture
Description : Solvent used in extractive distillation (A) Is of low volatility (B) Forms a low boiling azeotrope (C) Forms a high boiling azeotrope (D) Does not alter the relative volatility of the original components
Last Answer : (B) Forms a low boiling azeotrope
Description : Components, having widely different boiling point in a binary mixture, can be separated using __________ distillation. (A) Molecular (B) Extractive (C) Steam (D) Simple
Last Answer : (D) Simple
Description : Extraction of coffee from its seed is done by (A) Liquid-liquid extraction (B) Leaching (C) Extractive distillation (D) Steam distillation
Last Answer : (B) Leaching
Description : In case of __________ distillation, a solvent is added to alter the relative volatility of the mixture to be separated. (A) Molecular (B) Azeotropic (C) Extractive
Last Answer : (C) Extractive
Description : Rose oil is extracted from rose leaves using __________ distillation. (A) High pressure (B) Low pressure (C) Extractive (D) Steam
Last Answer : (D) Steam
Description : ADDUCTS' and 'CLATHRATES' are used in case of (A) Extractive distillation (B) Crystallisation (C) Absorption (D) None of these
Last Answer : (B) Crystallisation
Description : Pick out the correct statement. (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of ... Flash distillation is suitable for separating components which have very close boiling temperature
Last Answer : (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of nonideal binary system by distillation
Description : A binary mixture of benzene and cyclohexane is separated by (A) Flash vaporisation (B) Extractive distillation (C) Solvent extraction (D) Ordinary distillation
Last Answer : (B) Extractive distillation
Description : Alcohol is dehydrated using __________ distillation. (A) Extractive (B) Azeotropic (C) Steam (D) Molecular
Last Answer : (B) Azeotropic
Description : Polar organic compounds are normally used as separating agents for the azeotropic and extractive distillation. Which of the following is the most important factor to be considered for the choice of the separating agent ... ? (A) Cost (B) Availability (C) Toxicity (D) Selectivity
Last Answer : (D) Selectivity
Description : Essential oils are usually obtained using (A) Steam distillation (B) Extractive distillation (C) Solvent extraction (D) Leaching
Last Answer : (D) Leaching
Description : Penicillin is separated from fermented broth by (A) Extraction with amyl or butyl acetate (B) Ternary Azeotropic distillation (C) Evaporator in calandria (D) Extractive distillation
Last Answer : (A) Extraction with amyl or butyl acetate
Description : Boiling point of a solution according to Duhring's rule is a linear function of the __________ of water. (A) Boiling point (at the same pressure) (B) Viscosity (C) Density (D) Thermal conductivity
Last Answer : (A) Boiling point (at the same pressure)
Description : . Boiling point elevation for a strong and concentrated solution is found by Duhring's rule, which states that at the same pressure, the boiling point of a solution is a linear function of the __________ of pure water. (A) Boiling point (B) Dynamic viscosity (C) Kinematic viscosity (D) Density
Last Answer : (A) Boiling point
Description : Heat sensitive materials with very high latent heat of vaporisation may be economically separated using (A) Liquid extraction (B) Distillation (C) Evaporation (D) Absorption
Last Answer : (A) Liquid extraction
Description : The recovery of penicillin from the acidified fermentation broth is done by (A) Distillation (B) Evaporation (C) Absorption (D) Liquid extraction
Last Answer : (D) Liquid extraction
Description : Acetic acid will be most economically separated from a dilute solution of acetic acid in water by (A) Solvent extraction (B) Continuous distillation (C) Evaporation (D) Absorption
Last Answer : (A) Solvent extraction
Description : Pick out the wrong statement. (A) In case of heat transfer by purely forced convection, GR /Re 2 ≤ 1 (B) The equivalent diameter of heat transfer for a duct of ... nucleate boiling depends basically on the ease with which the bubbles are formed and detached from the heating surface
Last Answer : (B) The equivalent diameter of heat transfer for a duct of square crosssection (having each side as 'x') is equal to 4x
Description : The most important application of distribution law is in (A) Evaporation (B) Liquid extraction (C) Drying (D) Distillation
Last Answer : (B) Liquid extraction
Description : Out of two equilibrium curves, first one lies above the diagonal and the second lies below the diagonal in the x-y plot. It means that separation by distillation is (A) Not possible in the second ... (C) More readily done in the second case compared to first one (D) None of these
Last Answer : (C) More readily done in the second case compared to first one
Description : When acetone is added in a two layer mixture of methyl isobutyl ketone and water at 30°C, the acetone distributes between the two layers and the composition of the layer follows two solubility curves. For this system ... at the concentration of the plait point (D) All (A), (B) and (C
Last Answer : (D) All (A), (B) and (C
Description : Cox chart, which is useful in the design of distillation column particularly for petroleum hydrocarbons, is a plot of (where, P = vapor pressure, T = temperature). (A) log P vs. T (B) log P vs. log T (C) T vs. P (D) P vs. log T
Last Answer : (A) log P vs. T
Description : Consider the following processes: 1. Evaporation 2. Fractional distillation 3. Distillation 4. Filtration The process(es) involved in the refining of crude oil is/ are: (a) 3 only (b) 2 and 3 (c) 3 only (d) 1 only
Last Answer : Ans:(b)
Description : A mixture of water and alcohol can be separated by – (1) Filtration (2) Evaporation (3) Decantation (4) Distillation
Last Answer : (4) Distillation Explanation: A mixture of water and alcohol is separated by the process of distillation. At 780C, alcohol starts to vaporize. The vapours are condensed in the condenser and alcohol is collected in the receiver.
Description : Water can be separated from alcohol water mixture by – (1) decantation (2) evaporation (3) distillation (4) sublimation
Last Answer : (3) distillation Explanation: Distillation is a method of separating mixtures based on differences in volatilities of components in a boiling liquid mixture. Distillation is a unit operation, or a ... is distilled to separate its components- notably oxygen, nitrogen, and argon- for industrial use.
Description : Sea water can be purified by the process of – (1) distillation (2) evaporation (3) filtration (4) fractional distillation
Last Answer : (1) distillation Explanation: The traditional process used in desalination operations is vacuum distillation- essentially the boiling of water at less than atmospheric pressure and thus a much ... when the vapor pressure equals the ambient pressure and vapor pressure increases with temperature.
Description : A mixture of water and alcohol can be separated by - (1) Filtration (2) Evaporation (3) Distillation (4) Decantation
Last Answer : (3) Distillation Explanation: Simple distillation is a procedure by which two liquids with different boiling points can be separated.
Description : Differentiate between Evaporation and Distillation and explain the working and application of simple distillation.
Last Answer : Evaporation Distillation: 1. Free escape of vapors from the surface of liquid below its boiling point. Evaporation takes place even at room temperature 1) Process of ... Concentration of liquid and to separate non volatile solid from the volatile liquid such as alcohol and ether.
Description : A mixture of water and alcohol can be separated by (1) Filtration (2) Evaporation (3) Decantation (4) Distillation
Last Answer : Distillation
Description : Sea water can be purified by the process of (1) distillation (2) evaporation (3) filtration (4) fractional distillation
Last Answer : distillation
Description : Water can be separated from alcohol water mixture by (1) decantation (2) evaporation (3) distillation (4) sublimation
Description : Identify the correct statement with reference to the extractive metallurgy of aluminium. (A) The electrolyte consists of molten Na3AlF6 with approximately 1 to 8% Al2O3 (B) Approximately 80% of ... is immediately vaporised (D) Anode effect sets in when the cryolite concentration goes below 40%.
Last Answer : (A) The electrolyte consists of molten Na3AlF6 with approximately 1 to 8% Al2O3
Description : How many of the given metals can be obtained by carbon reduction in their extractive metallurgy
Last Answer : How many of the given metals can be obtained by carbon reduction in their extractive metallurgy
Description : Which of the following process is used in the extractive metallurgy of magnesium ?
Last Answer : Which of the following process is used in the extractive metallurgy of magnesium ? A. ... C. Aqqueos solution electrolysis D. Therminte reducation
Description : Which of the following statement is incorrect about the extractive metallurgy of coper?
Last Answer : Which of the following statement is incorrect about the extractive metallurgy of coper? A. Matte ... Bessomer converter is called as blister copper.
Last Answer : Which of the following process is used in the extractive metallurgy of magnesium ? A. ... C. Aqueous solution electrolysis D. Thermite reduction
Description : In extractive metallurgy of lead, the reduction of the roasted ore to the molten metal by heating with coke is called
Last Answer : In extractive metallurgy of lead, the reduction of the roasted ore to the molten metal by heating with ... B. roasting C. calcination D. None of these
Description : If a metal can be drawn into wires relatively easily it is called: (1) malleable (2) ductile (3) extractive (4) tactile
Last Answer : (2) ductile Explanation: Ductility is a physical property of a material associated with the ability to be hammered thin or stretched into wire without breaking.
Description : If a metal can be drawn into wires relatively easily it is called: w) malleable x) ductile y) extractive z) tactile
Last Answer : ANSWER: X -- DUCTILE
Description : Only small amount of evaporation of water produces large cooling effects because of its (A) Large latent heat (B) Low viscosity (C) Small latent heat (D) None of these
Last Answer : (A) Large latent heat
Description : Make up water is supplied during cooling tower operation to compensate for water losses due to (A) Evaporation (B) Blowdown (C) Entrainment (D) All (A), (B) & (C)
Last Answer : (D) All (A), (B) & (C)
Description : For the air water system under ambient conditions, the adiabatic saturation temperature and the wet bulb temperature are nearly equal, because (A) Water has a high latent heat of evaporation (B) Lewis number is close to unity (C) They are always equal under all circumstances
Last Answer : (A) Water has a high latent heat of evaporation
Description : Separation of two or more components of a liquid solution cannot beachieved by (A) Fractional crystallisation (B) Liquid extraction (C) Absorption (D) Evaporation
Last Answer : (C) Absorption
Description : Make up water is required in a cooling tower to replace the water lost by (A) Evaporation (B) Drift (C) Blowdown and leakage (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)