Which of the following has the highest gum forming tendency in gosoline? (A) Paraffins (B) Diolefins (C) Aromatics (D) Naphthenes

Which of the following has the highest gum forming tendency in
gosoline?
(A) Paraffins
(B) Diolefins
(C) Aromatics
(D) Naphthenes
by

1 Answer

Answer :

(B) Diolefins
by

Related questions

Which of the following hydrocarbons of same carbon atoms has minimum smoking tendency? (A) Paraffins (B) Naphthenes (C) Aromatics (D) Iso-paraffins

Description : Which of the following hydrocarbons of same carbon atoms has minimum smoking tendency? (A) Paraffins (B) Naphthenes (C) Aromatics (D) Iso-paraffins

Last Answer : (A) Paraffins

Pick out the wrong statement about the smoking tendency of various hydrocarbon constituents of kerosene. (A) Smoking tendency of hydrocarbons increases in the order: paraffins → isoparaffins → naphthenes → aromatics (B) Smoking tendency of paraffins increases with decrease in its molecular weight

Description : Pick out the wrong statement about the smoking tendency of various hydrocarbon constituents of kerosene. (A) Smoking tendency of hydrocarbons increases in the order: paraffins → isoparaffins → naphthenes → aromatics (B) Smoking tendency of paraffins increases with decrease in its molecular weight

Last Answer : (B) Smoking tendency of paraffins increases with decrease in its molecular weight

In a SI engine, which one of the following is the correct order of the fuels with increasing detonation tendency? (a) Paraffins, olefins, naphthenes, aromatics (b) Aromatics, naphthenes, paraffins, olefins (c) Naphthenes, olefins, aromatics, paraffins (d) Aromatics, naphthenes, olefins, paraffins

Description : In a SI engine, which one of the following is the correct order of the fuels with increasing detonation tendency? (a) Paraffins, olefins, naphthenes, aromatics (b) Aromatics, naphthenes, paraffins, olefins (c) Naphthenes, olefins, aromatics, paraffins (d) Aromatics, naphthenes, olefins, paraffins

Last Answer : Ans :d

Which of the following has the highest octane number? (A) Aromatics(B) i-paraffins(C) Naphthenes(D) Olefins

Description : Which of the following has the highest octane number? (A) Aromatics (B) i-paraffins (C) Naphthenes (D) Olefins

Last Answer : (A) Aromatics

H/C ratio (by weight) for the same number of carbon atoms is the highest in case of (A) Aromatics (B) Paraffins (C) Olefins (D) Naphthenes

Description : H/C ratio (by weight) for the same number of carbon atoms is the highest in case of (A) Aromatics (B) Paraffins (C) Olefins (D) Naphthenes

Last Answer : (D) Naphthenes

Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming process (C) The most ideal feedstock for thermal reforming is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base

Description : Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming ... is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base

Last Answer : (C) The most ideal feedstock for thermal reforming is dearomatised kerosene

Which is the most desirable component of a good quality kerosene? (A) i-paraffins (B) Aromatics (C) n-paraffins (D) Naphthenes

Description : Which is the most desirable component of a good quality kerosene? (A) i-paraffins (B) Aromatics (C) n-paraffins (D) Naphthenes

Last Answer : (C) n-paraffins

Choose the correct statement. (A) Octane number of i-octane is zero (B) Octane number of paraffins increases with increasing number of carbon atoms (C) Branched chain paraffins have higher octane number than straight chain paraffins with same number of carbon atoms (D) The aromatics have lower octane number than naphthenes with same number of carbon atoms

Description : Choose the correct statement. (A) Octane number of i-octane is zero (B) Octane number of paraffins increases with increasing number of carbon atoms (C) Branched chain paraffins have higher octane ... atoms (D) The aromatics have lower octane number than naphthenes with same number of carbon atoms

Last Answer : (A) Octane number of i-octane is zero

Which is the most undesirable component in kerosene? (A) Aromatics (B) i-paraffins (C) n-paraffins (D) Naphthenes

Description : Which is the most undesirable component in kerosene? (A) Aromatics (B) i-paraffins (C) n-paraffins (D) Naphthenes

Last Answer : (A) Aromatics

Extractor temperature is maintained at -20°C in Edeleanu process to reduce the __________ of kerosene. (A) Smoke point (B) Paraffins (C) Aromatics (D) Naphthenes

Description : Extractor temperature is maintained at -20°C in Edeleanu process to reduce the __________ of kerosene. (A) Smoke point (B) Paraffins (C) Aromatics (D) Naphthenes

Last Answer : (B) Paraffins

Which of the following is the easiest to crack? (A) Paraffins (B) Olefins (C) Naphthenes (D) Aromatics

Description : Which of the following is the easiest to crack? (A) Paraffins (B) Olefins (C) Naphthenes (D) Aromatics

Last Answer : (A) Paraffins

Reforming converts (A) Olefins into paraffins (B) Naphthenes into aromatics (C) Naphthenes into olefins (D) Naphthenes into paraffin

Description : Reforming converts (A) Olefins into paraffins (B) Naphthenes into aromatics (C) Naphthenes into olefins (D) Naphthenes into paraffin

Last Answer : (B) Naphthenes into aromatics

The colour of gasoline is an indication of its (A) Octane number (B) Lead susceptibility (C) Gum forming tendency & thoroughness of refining (D) None of these

Description : The colour of gasoline is an indication of its (A) Octane number (B) Lead susceptibility (C) Gum forming tendency & thoroughness of refining (D) None of these

Last Answer : (C) Gum forming tendency & thoroughness of refining

Mineral oils (e.g. petroleum oils) are preferred over fatty oils (e.g. mustard oil, ghee, tallow, palm oil, olive oil etc.) as a lubricant due to its (A) Poor oxidation stability and high gum forming tendency (B) Greater tendency of decomposition at elevated temperature (C) Hydrolysis tendency in presence of water (D) All (A), (B) and (C)

Description : Mineral oils (e.g. petroleum oils) are preferred over fatty oils (e.g. mustard oil, ghee, tallow, palm oil, olive oil etc.) as a lubricant due to its (A) Poor oxidation stability and high gum forming ... at elevated temperature (C) Hydrolysis tendency in presence of water (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Isomerisation converts the __________ tot-paraffins. (A) Paraffins (B) Olefins (C) Naphthenes (D) None of these

Description : Isomerisation converts the __________ tot-paraffins. (A) Paraffins (B) Olefins (C) Naphthenes (D) None of these

Last Answer : (A) Paraffins

The main reaction in reforming is the (A) Dehydrogenation of naphthenes (B) Hydrogenation of naphthenes (C) Hydrocracking of paraffins (D) Saturation of olefins

Description : The main reaction in reforming is the (A) Dehydrogenation of naphthenes (B) Hydrogenation of naphthenes (C) Hydrocracking of paraffins (D) Saturation of olefins

Last Answer : (A) Dehydrogenation of naphthenes

Smoke point of a test sample of kerosene is found to be 15 mm. On removal of __________ from it, the smoke point rises to 25 mm. (A) n-paraffins (B) Olefins (C) Aromatics (D) None of these

Description : Smoke point of a test sample of kerosene is found to be 15 mm. On removal of __________ from it, the smoke point rises to 25 mm. (A) n-paraffins (B) Olefins (C) Aromatics (D) None of these

Last Answer : (C) Aromatics

Pick out the correct statement. (A) Paraffins have higher octane number than corresponding iso-paraffin (B) Paraffins have lower smoke point than aromatics

Description : Pick out the correct statement. (A) Paraffins have higher octane number than corresponding iso-paraffin (B) Paraffins have lower smoke point than aromatics

Last Answer : (B) Paraffins have lower smoke point than aromatics

Pick out the wrong statement. (A) Aromatics have higher specific gravity than paraffins (B) Gross calorific value (GCV) of petrofuels is equal to (12400 - 2100 ρ 2 ) where, ρ is the specific gravity of the fuel at 15.5°C (C) Heavier petrofuels have higher GCV on weight basis (i.e., Kcal/kg) but lower GCV on volume basis (i.e., Kcal/litre) (D) Higher specific gravity of petrofuels means higher C/H ratio

Description : Pick out the wrong statement. (A) Aromatics have higher specific gravity than paraffins (B) Gross calorific value (GCV) of petrofuels is equal to (12400 - 2100 ρ 2 ) where, ρ is the specific gravity ... volume basis (i.e., Kcal/litre) (D) Higher specific gravity of petrofuels means higher C/H ratio

Last Answer : (C) Heavier petrofuels have higher GCV on weight basis (i.e., Kcal/kg) but lower GCV on volume basis (i.e., Kcal/litre)

Pyrolysis of kerosene or natural gasoline is done to produce mainly the (A) Olefins and aromatics (B) Lighter paraffins (C) Stabilised gasoline (D) Diesel

Description : Pyrolysis of kerosene or natural gasoline is done to produce mainly the (A) Olefins and aromatics (B) Lighter paraffins (C) Stabilised gasoline (D) Diesel

Last Answer : (A) Olefins and aromatic

Which of the following is desirable in diesel and kerosene but is undesirable in gasoline? (A) Aromatics (B) Mercaptans (C) Paraffins (D) Naphthenic acid

Description : Which of the following is desirable in diesel and kerosene but is undesirable in gasoline? (A) Aromatics (B) Mercaptans (C) Paraffins (D) Naphthenic acid

Last Answer : (A) Aromatics

Which of the following is desirable in petrol (gasoline) but undesirable in kerosene? (A) Paraffins (B) Aromatics (C) Mercaptans

Description : Which of the following is desirable in petrol (gasoline) but undesirable in kerosene? (A) Paraffins (B) Aromatics (C) Mercaptans

Last Answer : (C) Mercaptans

Pick out the wrong statement. (A) Higher specific gravity of petroleum products means higher C/H ratio (B) Aromatics have lower specific gravity than corresponding paraffins (C) Hydrocarbons of low specific gravity (e.g., paraffins) possess the maximum thermal energy per unit volume (D) Hydrocarbons of high specific gravity (e.g., aromatics) possess the maximum thermal energy per unit weight

Description : Pick out the wrong statement. (A) Higher specific gravity of petroleum products means higher C/H ratio (B) Aromatics have lower specific gravity than corresponding paraffins (C) Hydrocarbons of low ... of high specific gravity (e.g., aromatics) possess the maximum thermal energy per unit weight

Last Answer : (B) Aromatics have lower specific gravity than corresponding paraffins

Good quality kerosene should have (A) Low smoke point (B) High smoke point (C) High aromatics content (D) Low paraffins content

Description : Good quality kerosene should have (A) Low smoke point (B) High smoke point (C) High aromatics content (D) Low paraffins content

Last Answer : (B) High smoke point

Which of the following has the lowest cetane number? (A) Aromatics (B) i-paraffins (C) Naphthene (D) Olefins

Description : Which of the following has the lowest cetane number? (A) Aromatics (B) i-paraffins (C) Naphthene (D) Olefins

Last Answer : (A) Aromatics

For C.I. engines fuel most preferred are a) aromatics b) paraffins c) olefins d) napthenes

Description : For C.I. engines fuel most preferred are a) aromatics b) paraffins c) olefins d) napthenes

Last Answer : Answer: b Explanation: For C.I. engines fuel most preferred are paraffins and for S.I. engines fuel most preferred are aromatics.

For S.I. engines fuel most preferred are a) aromatics b) paraffins c) olefins d) napthenes

Description : For S.I. engines fuel most preferred are a) aromatics b) paraffins c) olefins d) napthenes

Last Answer : Answer: a Explanation: For S.I. engines fuel most preferred are aromatics while for C.I. engines fuel most preferred are paraffins.

Complete removal of __________ from gasoline is done by Unisol process using caustic soda and methyl alcohol. (A) Waxes (B) Mercaptans (C) Asphalt (D) Diolefins

Description : Complete removal of __________ from gasoline is done by Unisol process using caustic soda and methyl alcohol. (A) Waxes (B) Mercaptans (C) Asphalt (D) Diolefins

Last Answer : (B) Mercaptans

Higher boiling fractions like atmospheric residue is distilled under vacuum at low temperature because at high temperature, there is a tendency of the predominance of(A) Thermal cracking(B) Gum formation(C) Coking(D) Discoloration

Description : Higher boiling fractions like atmospheric residue is distilled under vacuum at low temperature because at high temperature, there is a tendency of the predominance of (A) Thermal cracking (B) Gum formation (C) Coking (D) Discoloration

Last Answer : (C) Coking

Sulphuric acid treatment of petroleum products removes the __________ materials. (A) Gum forming (B) Color forming (C) Asphaltic (D) All (A), (B) & (C)

Description : Sulphuric acid treatment of petroleum products removes the __________ materials. (A) Gum forming (B) Color forming (C) Asphaltic (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Glycol added to petrol acts as a/an __________ agent. (A) Anti-knocking (B) Anti-icing (C) Anti-gum forming (D) Dewaxing

Description : Glycol added to petrol acts as a/an __________ agent. (A) Anti-knocking (B) Anti-icing (C) Anti-gum forming (D) Dewaxing

Last Answer : (B) Anti-icing

Catalytic cracking compared to thermal cracking of residue of vacuum distillation of crude oil (A) Gives higher yield of petrol (B) Lower octane number of petrol (C) Higher sulphur content in the product (D) Higher gum forming material in petro

Description : Catalytic cracking compared to thermal cracking of residue of vacuum distillation of crude oil (A) Gives higher yield of petrol (B) Lower octane number of petrol (C) Higher sulphur content in the product (D) Higher gum forming material in petro

Last Answer : (A) Gives higher yield of petrol

In catalytic cracking, the (A) Gasoline obtained has a very low octane number (B) Pressure & temperature is very high (C) Gasoline obtained has very high aromatic content (D) Gasoline obtained has very high amount of gum forming compounds

Description : In catalytic cracking, the (A) Gasoline obtained has a very low octane number (B) Pressure & temperature is very high (C) Gasoline obtained has very high aromatic content (D) Gasoline obtained has very high amount of gum forming compounds

Last Answer : (C) Gasoline obtained has very high aromatic content

Which of the following has a very high carbide forming tendency in steels? (A) Silicon (B) Chromium (C) Nickel (D) Vanadium

Description : Which of the following has a very high carbide forming tendency in steels? (A) Silicon (B) Chromium (C) Nickel (D) Vanadium

Last Answer : (D) Vanadium

Which of the following has no effect on the carbide forming tendency insteels?(A) Molybdenum(B) Phosphorus(C) Chromium(D) Vanadium

Description : Which of the following has no effect on the carbide forming tendency insteels? (A) Molybdenum (B) Phosphorus (C) Chromium (D) Vanadium

Last Answer : (B) Phosphorus

Aromatics have the highest __________ of all the hydrocarbons of same carbon atoms. (A) Smoke point (B) Octane number (C) Cetane number (D) Viscosity

Description : Aromatics have the highest __________ of all the hydrocarbons of same carbon atoms. (A) Smoke point (B) Octane number (C) Cetane number (D) Viscosity

Last Answer : (B) Octane number

Which is almost absent in crude petroleum? (A) Olefins (B) Mercaptans (C) Naphthenes (D) Cycloparaffins

Description : Which is almost absent in crude petroleum? (A) Olefins (B) Mercaptans (C) Naphthenes (D) Cycloparaffins

Last Answer : (B) Mercaptans

Liquefied Petroleum Gas (LPG) is mainly a mixture of (A) Propane & butane (B) Methane & ethane (C) High boiling olefins (D) High boiling naphthenes

Description : Liquefied Petroleum Gas (LPG) is mainly a mixture of (A) Propane & butane (B) Methane & ethane (C) High boiling olefins (D) High boiling naphthenes

Last Answer : (A) Propane & butane

The general formula of naphthenes is(A) CnH2n + 2(B) CnH2n-6(where, n ≥ 6)(C) CnHn-4(D) Same as that for olefins i.e. CnH2n

Description : The general formula of naphthenes is (A) CnH2n + 2 (B) CnH2n-6 (where, n ≥ 6) (C) CnHn-4 (D) Same as that for olefins i.e. CnH2n

Last Answer : (B) CnH2n-6 (where, n ≥ 6)

CnH2n is the general formula for (A) Olefins (B) Naphthenes (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : CnH2n is the general formula for (A) Olefins (B) Naphthenes (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Which one of the following processes aims at producing higher yield of gaseous unsaturated hydrocarbons and aromatics like benzene & toluene? (A) Reforming (B) Pyrolysis (C) Alkylation (D) Hydrocracking

Description : Which one of the following processes aims at producing higher yield of gaseous unsaturated hydrocarbons and aromatics like benzene & toluene? (A) Reforming (B) Pyrolysis (C) Alkylation (D) Hydrocracking

Last Answer : (A) Reforming

Solvent used in the Udex (glycol) extraction process for removal of light aromatics from cracked naphtha is (A) Propane (B) Diethylene glycol (C) Aqueous solution (10% water) of diethylene glycol (D) Methyl ethyl ketone (MEK)

Description : Solvent used in the Udex (glycol) extraction process for removal of light aromatics from cracked naphtha is (A) Propane (B) Diethylene glycol (C) Aqueous solution (10% water) of diethylene glycol (D) Methyl ethyl ketone (MEK)

Last Answer : (C) Aqueous solution (10% water) of diethylene glycol

Alkylation (A) Causes olefins to combine with each other(B) Causes olefins to combine with iso-paraffins(C) Converts iso-paraffin into olefin(D) Converts olefin into paraffin

Description : Alkylation (A) Causes olefins to combine with each other (B) Causes olefins to combine with iso-paraffins (C) Converts iso-paraffin into olefin (D) Converts olefin into paraffin

Last Answer : (B) Causes olefins to combine with iso-paraffins

__________ converts n-paraffins to i-paraffins. (A) Alkylation (B) Polymerisation (C) Isomerisation (D) None of these

Description : __________ converts n-paraffins to i-paraffins. (A) Alkylation (B) Polymerisation (C) Isomerisation (D) None of these

Last Answer : (C) Isomerisation

Furfural solvent extraction is used for upgrading (by dissolving aromatics) (A) Naphtha (B) Lubricating oils (C) Wax (D) Cracking feedstock

Description : Furfural solvent extraction is used for upgrading (by dissolving aromatics) (A) Naphtha (B) Lubricating oils (C) Wax (D) Cracking feedstock

Last Answer : (B) Lubricating oils

Petroleum (A) Is optically active (B) Constitutes mainly of olefins (C) Does not contain asphalt (D) Does not contain aromatics

Description : Petroleum (A) Is optically active (B) Constitutes mainly of olefins (C) Does not contain asphalt (D) Does not contain aromatics

Last Answer : (A) Is optically active

In petroleum refining, the process used for conversion of hydrocarbons to aromatics is (A) Catalytic cracking (B) Catalytic reforming (C) Hydrotreating (D) Alkylation

Description : In petroleum refining, the process used for conversion of hydrocarbons to aromatics is (A) Catalytic cracking (B) Catalytic reforming (C) Hydrotreating (D) Alkylation

Last Answer : (B) Catalytic reforming

Polymerisation (A) Produces i-octane from cracked gases containing i-butane and butene (B) Causes olefins to combine with each other (C) Causes aromatics to combine with each other (D) Is aimed at producing lubricating oil

Description : Polymerisation (A) Produces i-octane from cracked gases containing i-butane and butene (B) Causes olefins to combine with each other (C) Causes aromatics to combine with each other (D) Is aimed at producing lubricating oil

Last Answer : (B) Causes olefins to combine with each other

Name the hydrocarbon having the poorest oxidation stability. (A) Naphthene (B) Olefin (C) Paraffin (D) Aromatics

Description : Name the hydrocarbon having the poorest oxidation stability. (A) Naphthene (B) Olefin (C) Paraffin (D) Aromatics

Last Answer : (D) Aromatics

Presence of predominantly large quantity of aromatics (polynuclear) is not desirable in aviation fuel, because it has (A) High pour point and low smoke point (B) Low viscosity index (C) High self-ignition temperature (D) All (A), (B) and (C)

Description : Presence of predominantly large quantity of aromatics (polynuclear) is not desirable in aviation fuel, because it has (A) High pour point and low smoke point (B) Low viscosity index (C) High self-ignition temperature (D) All (A), (B) and (C)

Last Answer : (B) Low viscosity index