A computer bus that is used to specify a Physical address? A. Address Bus B. Data Bus C. Control Bus D. None of the Above

A computer bus that is used to specify a Physical address? A. Address Bus B. Data Bus C. Control Bus D. None of the Above
by

1 Answer

Answer :

A. Address Bus
by
selected

Related questions

If in a computer, 16 bits are used to specify address in a RAM, the number of addresses will be A) 216 B) 65,536 C) 64K D) Any of the above

Description : If in a computer, 16 bits are used to specify address in a RAM, the number of addresses will be A) 216 B) 65,536 C) 64K D) Any of the above

Last Answer : Answer : B

Before a disk drive can access any sector record, a computer program has to provide the record’s disk address. What information does this address specify? A) Track number B) Sector number C) Surface number D) All of above

Description : Before a disk drive can access any sector record, a computer program has to provide the record’s disk address. What information does this address specify? A) Track number B) Sector number C) Surface number D) All of above

Last Answer : Answer : D

A bus that transfer data from one component to another or between computers is called _________ A. Address Bus B. Data Bus C. Control Bus D. None of the Above

Description : A bus that transfer data from one component to another or between computers is called _________ A. Address Bus B. Data Bus C. Control Bus D. None of the Above

Last Answer : B. Data Bus

The Command to access the memory or the I/O device is carried by ______ A. Address Bus B. Data Bus C. Control Bus D. None of the Above

Description : The Command to access the memory or the I/O device is carried by ______ A. Address Bus B. Data Bus C. Control Bus D. None of the Above

Last Answer : C. Control Bus

A physical connection between the microprocessor memory and other parts of the microcomputer is known as A) Path B) Address bus C) Route D) All of the above

Description : A physical connection between the microprocessor memory and other parts of the microcomputer is known as A) Path B) Address bus C) Route D) All of the above

Last Answer : Answer : B

Which of the following buses available on computer system: a) Address Bus b) Data Bus c) System Bus d) All of Above e) None of These

Description : Which of the following buses available on computer system: a) Address Bus b) Data Bus c) System Bus d) All of Above e) None of These

Last Answer : d) All of Above

If in a computer, 16 bits are used to specify address in a RAM, the number of addresses will be a. 216 b. 65,536 c. 64K d. Any of the above

Description : If in a computer, 16 bits are used to specify address in a RAM, the number of addresses will be a. 216 b. 65,536 c. 64K d. Any of the above

Last Answer : 65,536

Before a disk drive can access any sector record, a computer program has to provide the record’s disk address. What information does this address specify? a. Track number b. Sector number c. Surface number d. All of above

Description : Before a disk drive can access any sector record, a computer program has to provide the record’s disk address. What information does this address specify? a. Track number b. Sector number c. Surface number d. All of above

Last Answer : Track number

Before a disk drive can access any sector record, a computer program has to provide the record’s disk address. What information does this address specify? a. Track number b. Sector number c. Surface number d. All of above

Description : Before a disk drive can access any sector record, a computer program has to provide the record’s disk address. What information does this address specify? a. Track number b. Sector number c. Surface number d. All of above

Last Answer : d. All of above

If in a computer, 16 bits are used to specify address in a RAM, the number of addresses will be a. 216 b. 65,536 c. 64K d. Any of the above

Description : If in a computer, 16 bits are used to specify address in a RAM, the number of addresses will be a. 216 b. 65,536 c. 64K d. Any of the above

Last Answer : b. 65,536

Before a disk drive can access any sector record, a computer program has to provide the record’s disk address. What information does this address specify? a. Track number b. Sector number c. Surface number d. All of above

Description : Before a disk drive can access any sector record, a computer program has to provide the record’s disk address. What information does this address specify? a. Track number b. Sector number c. Surface number d. All of above

Last Answer : d. All of above

Both the ALU and Control Section have special purpose storage locations called : (1) Registers (2) Accumulators (3) Bus (4) Address

Description : Both the ALU and Control Section have special purpose storage locations called : (1) Registers (2) Accumulators (3) Bus (4) Address

Last Answer : Registers

The communication between the components in a microcomputer takes place via the address and ______ A. I/O bus B. Data bus C. Address bus D. None of the Above

Description : The communication between the components in a microcomputer takes place via the address and ______ A. I/O bus B. Data bus C. Address bus D. None of the Above

Last Answer : B. Data bus

System Bus Contains: a. Address Bus b. Data Bus c. Control Bus d. All of these

Description : System Bus Contains: a. Address Bus b. Data Bus c. Control Bus d. All of these

Last Answer : d. All of these

The ________ ensures that only one IC is active at a time to avoid a bus conflict caused by two ICs writing different data to the same bus.A.control busB.control instructionsC. address decoder D.CPU

Description : The ________ ensures that only one IC is active at a time to avoid a bus conflict caused by two ICs writing different data to the same bus.A.control busB.control instructionsC. address decoder D.CPU

Last Answer : C. address decoder

The lower red curvy arrow show that CPU places the address extracted from the memory location on the_____: a. Address bus b. System bus c. Control bus d. Data bus

Description : The lower red curvy arrow show that CPU places the address extracted from the memory location on the_____: a. Address bus b. System bus c. Control bus d. Data bus

Last Answer : a. Address bus

Which bus transfer singles from the CPU to external device and others that carry singles from external device to the CPU: a. Control bus b. Data bus c. Address bus d. None of these

Description : Which bus transfer singles from the CPU to external device and others that carry singles from external device to the CPU: a. Control bus b. Data bus c. Address bus d. None of these

Last Answer : a. Control bus

CPU can read & write data by using : a. Control bus b. Data bus c. Address bus d. None of these

Description : CPU can read & write data by using : a. Control bus b. Data bus c. Address bus d. None of these

Last Answer : b. Data bus

Which bus carry addresses: a. System bus b. Address bus c. Control bus d. Data bus

Description : Which bus carry addresses: a. System bus b. Address bus c. Control bus d. Data bus

Last Answer : b. Address bus

The hardware in which data may be stored for a computer system is called ________ A. Registers B. Bus C. Control Unit D. Memory

Description : The hardware in which data may be stored for a computer system is called ________ A. Registers B. Bus C. Control Unit D. Memory

Last Answer : D. Memory

Which of the following control fields in TCP header is used to specify the sender has no more data to transmit? (A) FIN (B) RST (C) SYN (D) PSH

Description : Which of the following control fields in TCP header is used to specify the sender has no more data to transmit? (A) FIN (B) RST (C) SYN (D) PSH

Last Answer : (A) FIN 

A physical connection between the microprocessor memory and other parts of the m9crocomputer is known as a. Path b. Address bus c. Route d. All of the above

Description : A physical connection between the microprocessor memory and other parts of the m9crocomputer is known as a. Path b. Address bus c. Route d. All of the above

Last Answer : b. Address bus

A physical connection between the microprocessor memory and other parts of the m9crocomputer is known as a. Path b. Address bus c. Route d. All of the above

Description : A physical connection between the microprocessor memory and other parts of the m9crocomputer is known as a. Path b. Address bus c. Route d. All of the above

Last Answer : b. Address bus

A physical connection between the microprocessor memory and other parts of the m9crocomputer is known as a. Path b. Address bus c. Route d. All of the above

Description : A physical connection between the microprocessor memory and other parts of the m9crocomputer is known as a. Path b. Address bus c. Route d. All of the above

Last Answer : b. Address bus

The simplest method of controlling sequence of instruction execution is to have each instruction explicitly specify: a. The address of next instruction to be run b. Address of previous instruction c. Both a &b d. None of these

Description : The simplest method of controlling sequence of instruction execution is to have each instruction explicitly specify: a. The address of next instruction to be run b. Address of previous instruction c. Both a &b d. None of these

Last Answer : a. The address of next instruction to be run

An instruction code must specify the address of the__. a. Opecode b. Operand c. Both d. None

Description : An instruction code must specify the address of the__. a. Opecode b. Operand c. Both d. None

Last Answer : b. Operand

........... is responsible for converting the higher level protocol addresses to physical Network Addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)

Description : ........... is responsible for converting the higher level protocol addresses to physical Network Addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)

Last Answer : A) Address Resolution Protocol (ARP)

The portion of physical layer that interfaces with the media access control sublayer is called ___________ a. physical signalling sublayer b. physical data sublayer c. physical address sublayer d. physical transport sublayer

Description : The portion of physical layer that interfaces with the media access control sublayer is called ___________ a. physical signalling sublayer b. physical data sublayer c. physical address sublayer d. physical transport sublayer

Last Answer : a. physical signalling sublayer

Which bus plays a crucial role in I/O: a. System bus b. Control bus c. Address bus d. Both A and B

Description : Which bus plays a crucial role in I/O: a. System bus b. Control bus c. Address bus d. Both A and B

Last Answer : b. Control bus

In 8096, CCB bit 3 is ____. a) write strobe mode select b) address valid strobe select c) bus width select d) Internal read control mode

Description : In 8096, CCB bit 3 is ____. a) write strobe mode select b) address valid strobe select c) bus width select d) Internal read control mode

Last Answer : c) bus width select

In 8096, CCB bit 3 is ____. a) write strobe mode select b) address valid strobe select c) bus width select d) Internal read control mode

Description : In 8096, CCB bit 3 is ____. a) write strobe mode select b) address valid strobe select c) bus width select d) Internal read control mode

Last Answer : b) address valid strobe select

What does microprocessor speed depends on? a) Clock b) Data bus width c) Address bus width

Description : What does microprocessor speed depends on? a) Clock b) Data bus width c) Address bus width

Last Answer : c) Address bus width

Calculate the size of memory address space for a 16 bit data and 20 bit address bus.

Description : Calculate the size of memory address space for a 16 bit data and 20 bit address bus. A) 1 MB B) 2 MB C) 3 MB D) 4 MB

Last Answer : Calculate the size of memory address space for a 16 bit data and 20 bit address bus. A) 1 MB B) 2 MB C) 3 MB D) 4 MB

Algorithm and Flow chart help us to A) Know the memory capacity B) Identify the base of a number system C) Direct the output to a printer D) Specify the problem completely and clearly

Description : Algorithm and Flow chart help us to A) Know the memory capacity B) Identify the base of a number system C) Direct the output to a printer D) Specify the problem completely and clearly

Last Answer : Answer : D

Algorithm and Flow chart help us to--- 1) Know the memory Capacity 2) Identify the base of a number system 3) Direct the output to a printer 4) Specify the problem completely and clearly

Description : Algorithm and Flow chart help us to--- 1) Know the memory Capacity 2) Identify the base of a number system 3) Direct the output to a printer 4) Specify the problem completely and clearly

Last Answer : 4) Specify the problem completely and clearly

Which IEEE standards specify the technologies for wireless LANs 802.11 a. IEEE 802.11 b. IEEE 802.10 c. IEEE 279.6 d. IEEE 275.4

Description : Which IEEE standards specify the technologies for wireless LANs 802.11 a. IEEE 802.11 b. IEEE 802.10 c. IEEE 279.6 d. IEEE 275.4

Last Answer : a. IEEE 802.11

Which IEEE standards specify the technologies for wireless LANs 802.11 a. IEEE 802.11 b. IEEE 802.10 c. IEEE 279.6 d. IEEE 275.4

Description : Which IEEE standards specify the technologies for wireless LANs 802.11 a. IEEE 802.11 b. IEEE 802.10 c. IEEE 279.6 d. IEEE 275.4

Last Answer : a. IEEE 802.11

What is the path from which data flow in a computer system is known as A) Car B) Bus C) Truck D) Road

Description : What is the path from which data flow in a computer system is known as A) Car B) Bus C) Truck D) Road

Last Answer : Answer : B

A communication system that transfers data between the components inside a computer or between computers is called _______ A. Port B. Bus C. Registers D. None of the Above

Description : A communication system that transfers data between the components inside a computer or between computers is called _______ A. Port B. Bus C. Registers D. None of the Above

Last Answer : B. Bus

A place through which, data can enter or leave a computer is called (1) bus (2) dock (3) mouse (4) port

Description : A place through which, data can enter or leave a computer is called (1) bus (2) dock (3) mouse (4) port

Last Answer : port

The register which holds the address of the location to or from which data are to be transferred is known as_______ A. Instruction Register B. Control register C. Memory Address Register D. None of the Above

Description : The register which holds the address of the location to or from which data are to be transferred is known as_______ A. Instruction Register B. Control register C. Memory Address Register D. None of the Above

Last Answer : C. Memory Address Register

The tag is used to specify the individual table data in a table. (a) <tr> (b) <td> -Technology

Description : The tag is used to specify the individual table data in a table. (a) (b) -Technology

Last Answer : (b)The tag is used to specify the individual table data in a table.

The risk of material financial statement misstatement may be greater when the following conditions exist except a. When there is greater management intervention to specify the accounting treatment. b. When there is sufficient personnel with appropriate accounting and financial reporting skillsc. When there is greater manual intervention for data collection and processing. d. Complex calculations or accounting principles is involved.

Description : The risk of material financial statement misstatement may be greater when the following conditions exist except a. When there is greater management intervention to specify the accounting treatment. ... for data collection and processing. d. Complex calculations or accounting principles is involved

Last Answer : When there is sufficient personnel with appropriate accounting and financial reporting skills

In distributed databases, location transparency allows for database users, programmers and administrators to treat the data as if it is at one location. A SQL query with location transparency needs to specify: (A) Inheritances (B) Fragments (C) Locations (D) Local formats

Description : In distributed databases, location transparency allows for database users, programmers and administrators to treat the data as if it is at one location. A SQL query with location transparency needs to specify: (A) Inheritances (B) Fragments (C) Locations (D) Local formats 

Last Answer : (B) Fragments

What is Address Bus in the Computer System?

Description : What is Address Bus in the Computer System?

Last Answer : In a computer system, the address bus is a set of parallel electrical conductors that are used to transmit memory addresses between the central processing unit (CPU) and main memory. The address bus ... system's architecture, and its width has a direct impact on the system's overall memory capacity.

ICMP (Internet Control Message Protocol) is A. a TCP/IP protocol used todynamically bind ahigh level IP Address to alow-level physical hardware address B. a TCP/IP high level protocol for transferring filesfrom one machine to another C. a protocol used to monitor computersD.a protocol that handles error andcontrol messagesE.None of the above

Description : ICMP (Internet Control Message Protocol) is A. a TCP/IP protocol used todynamically bind ahigh level IP Address to alow-level physical hardware address B. a TCP/IP high level protocol for transferring ... to monitor computers D. a protocol that handles error andcontrol messages E. None of the above

Last Answer : a protocol that handles error andcontrol messages

………………….. is responsible for converting the higher level protocol addresses (IP addresses) to physical network addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)

Description : ………………….. is responsible for converting the higher level protocol addresses (IP addresses) to physical network addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)

Last Answer : A) Address Resolution Protocol (ARP)

........ is responsible for converting the higher level protocol addresses to physical Network Addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)

Description : ........ is responsible for converting the higher level protocol addresses to physical Network Addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)

Last Answer : D) Internet Control Message Protocol (ICMP)

Which of the following are the two main components of the CPU? A) Control Unit and Registers B) Registers and Main Memory C) Control unit and ALU D) ALU and bus

Description : Which of the following are the two main components of the CPU? A) Control Unit and Registers B) Registers and Main Memory C) Control unit and ALU D) ALU and bus

Last Answer : Answer : C