To protect most of the electrical equipment handling low power, the types of relays used are?

by

1 Answer

Answer :

To protect most of the electrical equipment handling low power, the types of relays used are thermocouple, electronic and bimetallic.

by

Related questions

IDMT relays are used to protect the transformer against :

Description : IDMT relays are used to protect the transformer against :  (A) Internal short -circuits (B) Open circuits (C) External short circuits (D) Oil leakage

Last Answer : IDMT relays are used to protect the transformer against : External short circuits

Thermal overload relays are used to protect the motor against over current due to?

Last Answer : Thermal overload relays are used to protect the motor against overcurrent due to heavy loads.

Protective relays are devices that detect abnormal conditions in electrical circuits by measuring?

Last Answer : Protective relays are devices that detect abnormal conditions in electrical circuits by measuring constantly the electrical quantities which differ during normal and abnormal conditions.

The inverse definite mean time relays are used for over current and earth fault protection of transformer against?

Last Answer : The inverse definite mean time relays are used for over current and earth fault protection of transformer against internal short-circuits.

The single phasing relays are used for the protection of?

Last Answer : The single phasing relays are used for the protection of three phase motors.

Which relays are used for phase faults on long line?

Last Answer : Impedance relays are used for phase faults on long line.

Discrimination between main and backup protection is provided by the use of relays which are?

Last Answer : Discrimination between main and back up protection is provided by the use of relays which are slow.

Directional relays are based on flow of?

Last Answer : Directional relays are based on flow of power.

D.C. shunt relays are made of?

Description : D.C. shunt relays are made of?

Last Answer : D.C. shunt relays are made of many turns of thin wire.

Overload relays are of?

Last Answer : Overload relays are of induction, solid state, thermal, electromagnetic type.

Relays can be designed to respond to changes in?

Last Answer : Relays can be designed to respond to changes in resistance, reactance or impedance voltage and current, light intensity, temperature.

In a low power factor wattmeter the pressure coil is connected?

Last Answer : In a low power factor wattmeter the pressure coil is connected to the load side of the current coil.

The primary reason for low power factor is supply system is due to installation of?

Last Answer : The primary reason for low power factor is supply system is due to installation of induction motors.

At which time power factor of the induction motor is low?

Description : At which time power factor of the induction motor is low?

Last Answer : The power factor of the inducction motor is low at the time of starting as compare to while the induction motor is running.

Why MOSFET is used for low power applications?

Last Answer : MOSFET have high current losses due to High on state resistance. Hence MOSFET is used for low power applications.

To protect most of the electrical equipment handling low power, the types of relays used are (a) thermocouple (b) electronic and bimetallic (c) both (a) and (b) (d) none of the above

Description : To protect most of the electrical equipment handling low power, the types of relays used are (a) thermocouple (b) electronic and bimetallic (c) both (a) and (b) (d) none of the above

Last Answer : (c) both (a) and (b)

What are the types of power losses in inductor?

Description : What are the types of power losses in inductor?

Last Answer : Copper losses, Eddy current loss, and hysteresis loss are the types of power losses in inductor.

what are the three different types of Electric power?

Description : what are the three different types of Electric power?

Last Answer : Real,reactive,apparent power

Consider the following statements. Which of these statements are correct ? (1) Reactance relays are preferred

Description : Consider the following statements. Which of these statements are correct ?  (1) Reactance relays are preferred for ground fault relaying  (2) Impedance relays are most suitable for:protecting long transmission lines  (3) Mho relays are best ... (1) and (3) (C) (2) and (4) (D) (1), (2) and (4)

Last Answer : Consider the following statements. Which of these statements are correct ?  (1) Reactance relays are preferred for ground fault relaying  (2) Impedance relays are most suitable for:protecting long transmission lines  (3) Mho relays are ... (1) and (3) (C) (2) and (4) (D) (1), (2) and (4)

State different types of electrical signal and draw all types of waveforms.

Description : State different types of electrical signal and draw all types of waveforms.

Last Answer : Types of electrical signals 1) Sine wave 2) Triangular wave 3) Square wave Waveforms

To protect the power transformer (Y-Y with neutral grounded) against fault, what type of connection do the CTs have ?

Description : To protect the power transformer (Y-Y with neutral grounded) against fault, what type of connection do the CTs have ?

Last Answer : To protect the power transformer (Y-Y with neutral grounded) against fault, what type of connection do the CTs have ? Δ-Δ connection

A lightening arrester connected between the line and earth in a power system protects the terminal equipment

Description : A lightening arrester connected between the line and earth in a power system  (1) protects the terminal equipment against travelling surges (2) protects the transmission line against direct ... suppresses high frequency oscillations in the line (4) reflects back the travelling wave approaching it

Last Answer : A lightening arrester connected between the line and earth in a power system protects the terminal equipment against travelling surges

How to Treat Low Blood Sugar ?

Description : How to Treat Low Blood Sugar ?

Last Answer : How to Treat Low Blood Sugar Low blood sugar or hypoglycemia is a condition usually experienced by diabetics but it's also possible to experience it without being a diabetic yourself. For diabetics, low ... identify the cause of the problem and help you get the proper treatment as soon as possible.

Low Fat Barbecue Chicken

Description : Low Fat Barbecue Chicken

Last Answer : Low Fat Barbecue Chicken Dinner 4 lg. chicken breasts, cubed 1 green pepper, cut up 1 onion, cut up 1/2 to 3/4 c. barbecue sauce 1 to 2 bags Minute Rice, boil-in-bags Put chicken with green ... rice in center of plate. Make a nest and put chicken in center of rice. Looks nice and tastes great.

Low-Calorie Dressing

Description : Low-Calorie Dressing

Last Answer : Low-Calorie Dressing - serves 6 salad dressing 1 6-ounce can vegetable or tomato juice 1 tbsp very finely chopped onion 1 tbsp very finely chopped celery 1 tbsp very finely chopped bell pepper ... , oregano, tarragon or herb seasoning for the parsley will give a range of flavored salad dressing.

Name two methods for measurement of low, medium and high resistance. Give one advantage and one limitation of V- I method.

Description : Name two methods for measurement of low, medium and high resistance. Give one advantage and one limitation of V- I method.

Last Answer : Methods for measurement of low resistance:  1. Ammeter voltmeter method  2. Kelvin's bridge method  3. Ohm meter method  4. Potentiometer method  5. Digital/analog multi-meter ... must be infinity for perfectly accurate measurement which is not possible.  2. Connection errors.

Name the method used to measure following resistances:- (i) Low resistance (ii) Medium resistance (iii) Insulation resistance (iv) Earth resistance.

Description : Name the method used to measure following resistances:- (i) Low resistance (ii) Medium resistance (iii) Insulation resistance (iv) Earth resistance.

Last Answer : Following are the methods used to measure resistances:-  (i) Low resistance: 1.Voltmeter-Ammeter Method 2. Kelvin's Double bridge Method  (ii) Medium resistance: 1.Voltmeter-Ammeter Method 2. ... of Charge Method  (iv) Earth resistance : 1. Fall of Potential Method 2. Earth tester

State the range for low and medium resistance.

Description : State the range for low and medium resistance.

Last Answer : Low resistances: less than 1 ohm.  Medium resistances: 1 ohm to 0.1 Mega ohm. 

Step-down transformer converts high voltage and low current into:

Description : Step-down transformer converts high voltage and low current into:  (A) How voltage and high current (B) High voltage and low current (C) Low voltage and high current (D) None of the above

Last Answer : Step-down transformer converts high voltage and low current into: Low voltage and high current

Which of the following is the least expensive protection for over current in low voltage system?

Description : Which of the following is the least expensive protection for over current in low voltage system?  (A) Rewireable fuse (B) Isolator (C) Oil Circuit breaker (D) Air break circuit breaker

Last Answer : Which of the following is the least expensive protection for over current in low voltage system?  (A) Rewireable fuse (B) Isolator (C) Oil Circuit breaker (D) Air break circuit breaker

In a 741 Op-Amp, there is 20 dB/decade fall-off starting at a relatively low frequency. This is due to the

Description : In a 741 Op-Amp, there is 20 dB/decade fall-off starting at a relatively low frequency. This is due to the (A) applied load (B) internal compensation (C) impedance of the source (D) power dissipation in the chip

Last Answer : In a 741 Op-Amp, there is 20 dB/decade fall-off starting at a relatively low frequency. This is due to the internal compensation

Accurate measurement of very low resistances is possible with

Description : Accurate measurement of very low resistances is possible with (A) Megger (B) Wheatstone Bridge (C) Kelvin’s Double Bridge (D) Wagner’s Earthing Device

Last Answer : Accurate measurement of very low resistances is possible with Kelvin’s Double Bridge

Turbine used for low head is?

Last Answer : Turbine used for low head is Kaplan turbine.

At very low frequencies a series R-C circuit behaves as almost purely?

Description : At very low frequencies a series R-C circuit behaves as almost purely?

Last Answer : At very low frequencies a series R-C circuit behaves as almost purely capacitive.

In an AC. circuit, a low value of kVAR compared with kW indicates?

Description : In an AC. circuit, a low value of kVAR compared with kW indicates?

Last Answer : In an AC. circuit, a low value of kVAR compared with kW indicates high power factor.

A synchronous machine with low value of short-circuit ratio has?

Last Answer : A synchronous machine with low value of short-circuit ratio has lower stability limit.

A low utilization factor for a plant indicates that?

Last Answer : A low utilization factor for a plant indicates that plant is used for stand by purpose.

The efficiency of a transformer, under heavy loads, is comparatively low because?

Description : The efficiency of a transformer, under heavy loads, is comparatively low because?

Last Answer : The efficiency of a transformer, under heavy loads, is comparatively low because copper loss becomes high in proportion to the output.

What is the definition of extra low voltage?

Description : What is the definition of extra low voltage?

Last Answer : Extra-low voltage (ELV) is an electricity supply voltage in a range which carries a low risk of dangerous electrical shock.

write short notes on Low-pass filter.

Description : write short notes on Low-pass filter.

Last Answer : low-pass filter (1) filter exhibiting frequency selective characteristic that allows low-frequency components of an input signal to pass from filter input to output unattenuated all high-frequency components are ... the bandwidth of the filter. A filter whose impulse response is a low-pass signal.

Types of Fire Extinguishers? Use of Fire Extinguisher ?

Description : Types of Fire Extinguishers? Use of Fire Extinguisher ?

Last Answer : Ans. CO2 Type Fire Extinguishers, DCP type Fire Extinguishers Used for extinguishing fires of (1) Solid fires (2) Liquid fires (3) Gasfires(4)Electric

Wiring – types

Description : Wiring – types

Last Answer : Ans) a. Casing & Capping b. Concealed wiring c. Cleat Wiring d. Conduit Wiring – Cutting of wall.

Enlist the types of shapers.

Description : Enlist the types of shapers.

Last Answer : Types of shapers: Based on the type of driving mechanism: a) Crank type shaper. b) Geared type shaper. Based on ram travel: a) Horizontal shaper. b) Vertical shaper. Based on the table design: a ... shaper. b) Universal shaper. Based on cutting stroke. a) Push cut type. b) Draw cut type.

List the types of filters.

Description : List the types of filters.

Last Answer : Types of filter are as follows: 1. Shunt Capacitor filter (C filter) 2. Series Inductor filter (L filter) 3. LC filter 4. π filter (CLC filter)

Define earthing. State its types.

Description : Define earthing. State its types.  

Last Answer : Definition of earthing: * Earthing means connecting the metal body of electrical device to the general mass of earth by a wire of negligible resistance. OR * Earthing means connecting the metal body of ... ii) Pipe type earthing iii) Rod type earthing iv) Strip earthing v)Water main earthing

State the types of protections provided by MCB.

Description : State the types of protections provided by MCB. 

Last Answer : The types of protections provided by MCB: 1. MCB provides short circuit protection. 2. MCB provides overload protection

State different types of holders used in wiring installation.

Description : State different types of holders used in wiring installation.

Last Answer : Following types of holders used in wiring installation: 1. Pendent Holder 2. Batten Holder 3. Angle holder 4. Screwed holder 

Types of rolling mills and its applications

Description : Types of rolling mills and its applications

Last Answer : Types of rolling mills and its applications (1) Two-high rolling mill: used in blooming and slabbing mills (2) Three-high rolling mill: used for making plates or sections. (3) Four- ... : This mill is used for rolling stainless steel and other high strength steel sheets of thin gauge.

Types of slotting machine

Description : Types of slotting machine

Last Answer : 1. Puncher slotter 2. Precision slotter 3. Production slotter  Working Principle of Slotting machine:- The slotting machine is a reciprocating machine tool in which, The vertical slide holding the cutting ... longitudinal and cross feeds, a rotary feed motion is also provided in the work table. 

List types of chips produced in machining process.

Description : List types of chips produced in machining process.

Last Answer : The various types of chips produced in machining process are as follows: 1. Continuous chips: According to its name, continuous chips have a continuous segment. . 2. Discontinuous chips or segmental chips: ... chip is same as the continuous chips except a built edge is form at the face of tool.