Pure inductive circuit takes power from the A.C. line when?

Pure inductive circuit takes power from the A.C. line when?

by

2 Answers

Answer :

Pure inductive circuit takes power from the A.C. line when applied voltage decreases but current increases.

by

Answer :

It takes power when voltage decreases and current increases.
by

Related questions

In a pure inductive circuit if the supply frequency is reduced to 1/2, the current will?

Description : In a pure inductive circuit if the supply frequency is reduced to 1/2, the current will?

Last Answer : In a pure inductive circuit if the supply frequency is reduced to 1/2, the current will be doubled.

In a pure inductive circuit?

Description : In a pure inductive circuit?

Last Answer : Voltage lagging in inductor

Pure inductive circuit?

Description : Pure inductive circuit?

Last Answer : Pure inductive circuit takes power from the line during some part of the cycle and then returns back to it during other part of the cycle.

The inductive interference between power and communication line can be minimized by?

Last Answer : The inductive interference between power and communication line can be minimized by transposition of the power line, transposition of the communication line.

Power factor of an inductive circuit is usually improved by connecting capacitor to it in?

Description : Power factor of an inductive circuit is usually improved by connecting capacitor to it in?

Last Answer : Power factor of an inductive circuit is usually improved by connecting capacitor to it in parallel.

In a pure resistive circuit, the average power Pavg is _________ the peak power Pmax.

Description : In a pure resistive circuit, the average power Pavg is ______ the peak power Pmax. (1) Double (2) One-half of (3) One-fourth (4) Equal to

Last Answer : In a pure resistive circuit, the average power Pavg is One-half of the peak power Pmax.

In a purely inductive circuit?

Description : In a purely inductive circuit?

Last Answer : In a purely inductive circuit actual power is zero.

Time constant of an inductive circuit?

Description : Time constant of an inductive circuit?

Last Answer : Time constant of an inductive circuit increases with increase of inductance and decrease of resistance.

Is the power line voltage available in our homes a dc or an ac voltage?

Description : Is the power line voltage available in our homes a dc or an ac voltage?

Last Answer : The power line voltage available in our homes is AC. Mobile dwellings are the most commonly DC-supplied homes and even then they tend to include AC supply for heavier loads.

In a pure capacitive circuit if the supply frequency is reduced to 1/2, the current will?

Description : In a pure capacitive circuit if the supply frequency is reduced to 1/2, the current will?

Last Answer : In a pure capacitive circuit if the supply frequency is reduced to 1/2, the current will be reduced by half.

In a pure resistive circuit?

Description : In a pure resistive circuit?

Last Answer : In a pure resistive circuit current is in phase with the voltage.

An A.C. voltage is impressed across a pure resistance of 3.5 ohms in parallel...

Description : An A.C. voltage is impressed across a pure resistance of 3.5 ohms in parallel with a pure inductance of impedance of 3.5 ohms?

Last Answer : An A.C. voltage is impressed across a pure resistance of 3.5 ohms in parallel with a pure inductance of impedance of 3.5 ohms, both resistance and inductance carry equal currents.

In an A.C. circuit power is dissipated in?

Description : In an A.C. circuit power is dissipated in?

Last Answer : In an A.C. circuit power is dissipated in resistance only.

The apparent power drawn by an A.C. circuit is 10 kVA and active power is 8 kW. The reactive power in the circuit is?

Description : The apparent power drawn by an A.C. circuit is 10 kVA and active power is 8 kW. The reactive power in the circuit is?

Last Answer : The apparent power drawn by an A.C. circuit is 10 kVA and active power is 8 kW. The reactive power in the circuit is 6 kVAR.

The input of an A.C. circuit having power factor of 0.8 lagging is 40 kVA The power drawn by the circuit is?

Description : The input of an A.C. circuit having power factor of 0.8 lagging is 40 kVA The power drawn by the circuit is?

Last Answer : The input of an A.C. circuit having power factor of 0.8 lagging is 40 kVA The power drawn by the circuit is 32 kW.

Briefly explain how the power factor of an inductive circuit can be improved.

Description : Briefly explain how the power factor of an inductive circuit can be improved.

Last Answer : As we know that power factor should be corrected to ensure that the current supplied is cost friendly. Meaning the power factor should be around one but not greater than one(0.8-0.9) in a ... an inductive circuit due to the inductive reactance which oppose the change of current in the ac circuit. 

The rate of rise of current through an inductive coil is maximum?

Description : The rate of rise of current through an inductive coil is maximum?

Last Answer : The rate of rise of current through an inductive coil is maximum at the start of the current flow.

A parallel AC. circuit in resonance will?

Description : A parallel AC. circuit in resonance will?

Last Answer : A parallel AC. circuit in resonance will have a high impedance.

In an AC. circuit, a low value of kVAR compared with kW indicates?

Description : In an AC. circuit, a low value of kVAR compared with kW indicates?

Last Answer : In an AC. circuit, a low value of kVAR compared with kW indicates high power factor.

In any A.C. circuit always?

Description : In any A.C. circuit always?

Last Answer : In any A.C. circuit always apparent power is more than actual power.

All the rules and laws of D.C. circuit also apply to A.C. circuit containing?

Description : All the rules and laws of D.C. circuit also apply to A.C. circuit containing?

Last Answer : All the rules and laws of D.C. circuit also apply to A.C. circuit containing resistance only.

Can you apply Thevenin's theorem in an AC circuit?

Description : Can you apply Thevenin's theorem in an AC circuit?

Last Answer : It  can  be  applied  to  AC  circuits

A lightening arrester connected between the line and earth in a power system protects the terminal equipment

Description : A lightening arrester connected between the line and earth in a power system  (1) protects the terminal equipment against travelling surges (2) protects the transmission line against direct ... suppresses high frequency oscillations in the line (4) reflects back the travelling wave approaching it

Last Answer : A lightening arrester connected between the line and earth in a power system protects the terminal equipment against travelling surges

For a 500 Hz frequency excitation, a 50 km long power line will be modeled as

Description : For a 500 Hz frequency excitation, a 50 km long power line will be modeled as

Last Answer : For a 500 Hz frequency excitation, a 50 km long power line will be modeled as long line

The reactive power transfer over a line mainly depends on

Description : The reactive power transfer over a line mainly depends on

Last Answer : The reactive power transfer over a line mainly depends on lVsl- lVRl

What is a high tension power line?

Description : What is a high tension power line?

Last Answer : High tension power line is a high voltage of 115 kv and power line is underground transimissio used by urbun areas

The r.m.s. value of pure cosine function is?

Description : The r.m.s. value of pure cosine function is?

Last Answer : 0.707 of peak value

State maximum power transfer theorem for DC circuit.

Description : State maximum power transfer theorem for DC circuit.

Last Answer : Maximum power transfer theorem for DC circuit: The maximum power transfer theorem states that the source or a network transfers maximum power to load only when the load resistance is equal ... removed (disconnected) ii) All internal independent sources are replaced by their internal resistances.

List any two methods of reactive power measurement in 3 phase circuit.

Description : List any two methods of reactive power measurement in 3 phase circuit.

Last Answer : Methods of reactive power measurement in 3 phase circuit: (i) Two single phase wattmeter method (ii) One single phase wattmeter method

The power factor of a D.C. circuit is always?

Description : The power factor of a D.C. circuit is always?

Last Answer : The power factor of a D.C. circuit is always unity.

The power factor at resonance in R-L- C parallel circuit is?

Description : The power factor at resonance in R-L- C parallel circuit is?

Last Answer : since a rlc circuit at resonance behaves like a pure resistive circuit, i.e there is no phase difference between current and voltage, hence the power factor is unity.

Power factor of an electrical circuit is equal to?

Description : Power factor of an electrical circuit is equal to?

Last Answer : Power factor of an electrical circuit is equal to R/Z, cosine of phase angle difference between current and voltage, kW/kVA.

What is the power factor of purely resistive circuit?

Description : What is the power factor of purely resistive circuit.

Last Answer : Unity that is 1

what is drive circuit in power electronics ?

Description : What is drive circuit in power electronics?

Last Answer : Driver is used for Motion Control through the use of power electronics.

Explain working of static AC circuit breaker.

Description : Explain working of static AC circuit breaker. 

Last Answer : Static AC Circuit breaker: The circuit configuration of static AC circuit breaker using SCR is shown in the figure. When switch S' is closed, the SCRs T1 and T2 are fired in positive ... non-availability of gate current. Thus the maximum time delay for breaking the circuit is one half-cycle.

Explain working of AC circuit breaker using SCR with circuit diagram.

Description : Explain working of AC circuit breaker using SCR with circuit diagram.

Last Answer : AC Circuit Breaker:  The circuit configuration of static AC circuit breaker using SCR is shown in the figure. When switch S' is closed, the SCRs T1 and T2 are fired in positive ... to non-availability of gate current. Thus the maximum time delay for breaking the circuit is one half-cycle.

An AC supply of 230 V is applied to a half-wave rectifier circuit through a transformer having primary to

Description :  An AC supply of 230 V is applied to a half-wave rectifier circuit through a transformer having primary to secondary turn’s ratio 12:1. The peak inverse voltage is A) 8.62 V B) 12 V C) 19.17 V D) 27.11 V 

Last Answer :  An AC supply of 230 V is applied to a half-wave rectifier circuit through a transformer having primary to secondary turn’s ratio 12:1. The peak inverse voltage is A) 8.62 V B) 12 V C) 19.17 V D) 27.11 V 

An unshielded moving iron voltmeter is used to measure the voltage in an AC circuit. The stray DC magnetic

Description : An unshielded moving iron voltmeter is used to measure the voltage in an AC circuit. The stray DC magnetic field having a component along the axis will be  (1) unaffected (2) decreased (3) increased (4) either decreased or increased depending on the direction of the DC field

Last Answer : An unshielded moving iron voltmeter is used to measure the voltage in an AC circuit. The stray DC magnetic field having a component along the axis will be either decreased or increased depending on the direction of the DC field

What is the purpose of a capacitor in an AC circuit?

Description : What is the purpose of a capacitor in an AC circuit?

Last Answer : Every AC supply is not ideal AC it contains DC component so to provide restriction to DC component in supply we have to use Capacitor

Pure substances

Description : Pure substances

Last Answer : Any material that is not a mixture, is called a pure substance. Pure substances include elements and compounds. It is much more difficult to break down pure substances into their parts, and complex chemical methods are needed to do this.

A snubber circuit is connected to the power semiconductor device to reduce the

Description : A snubber circuit is connected to the power semiconductor device to reduce the (A) turn-on time (B) turn-off time (C) electrical stresses (D) thermal resistance

Last Answer : A snubber circuit is connected to the power semiconductor device to reduce the electrical stresses

Air blast circuit breakers for 400 kV power system are designed to operate in?

Last Answer : Air blast circuit breakers for 400 kV power system are designed to operate in 50 millisecond.

How do you find power in a circuit?

Description : How do you find power in a circuit?

Last Answer : Power can be find in a circuit by the means of meters .if an individual want to check for a power in a circuit he/she Calabria the meters on a high voltage range and put the meters Lee in parallel with the circuit he /she will know the amount of power within that circuit .

Why is AC better for long distance power transmission than DC ?

Description : Why is AC better for long distance power transmission than DC ?

Last Answer : ac is more economical to transmit for long distances . wires can be made smaller by step up transformer .. since major cost are wires to transmit .. then at the end of distance step down transformer is used for commercial use.

What is the symbol for AC power?

Description : What is the symbol for AC power?

Last Answer : If you need to measure alternating current in a circuit, different multimeters have different symbols to measure it (and the corresponding voltage), usually "ACA" and "ACV," or "A" and "V" with a squiggly line (~) next to or above them.

AC power plugs and sockets

Description : AC power plugs and sockets

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

AC power

Description : AC power

Last Answer : Ac power is in sinusoidal wave form .Alternating current pulsating sinusoidally that is positive half cycle and negative half cycle.

Circuits with XL Alone

Description : Circuits with XL Alone

Last Answer : Circuits with XL Alone X L values in series let two inductive reactances X L 1 and X L 2 are connected in series and has value 50 ohm and 50 ohm respectively. 100 volts A C ... phasor. And it is taken horizontal. Phase angle between inductive current and voltage is same 90 degree.

For a short transmission line with r/x ratio of is 1.0, the regulation will be zero when the load power factor is

Description : For a short transmission line with r/x ratio of is 1.0, the regulation will be zero when the load power factor is

Last Answer : For a short transmission line with r/x ratio of is 1.0, the regulation will be zero when the load power factor is 0.707 lead

effect of inductance and capacitance on performance of transmission line.

Description : effect of inductance and capacitance on performance of transmission line.

Last Answer : Following are the effect on performance of transmission line:  1. Due to inductance (L) voltage drop in transmission line produces.  2. Capacitor (C) draws charging current ... , transmission line efficiency, voltage regulation & also power factor of transmission line gets affected.