A closed switch has a resistance of?

A closed switch has a resistance of?
by

1 Answer

Answer :

A closed switch has a resistance of zero.

by

Related questions

Classify closed die forging. Explain any one with neat sketch.

Description : Classify closed die forging. Explain any one with neat sketch. 

Last Answer : Classification of closed / Impression die forging:- 1) drop forging 2) press forging 3) machine forging 4) Single die 5) Multi die close die forging :- Close die forging is also called as ... the first forging is made. after forging operation the part must be trimmed to remove the flash.

What are some examples of a closed loop system?

Description : What are some examples of a closed loop system?

Last Answer : C.L s/m. EX. Air conditioner (AC), rocket launcher, radar system, voltage stabilizer etc.

Why do you need a closed circuit for electricity to flow?

Description : Why do you need a closed circuit for electricity to flow?

Last Answer : When  the  circuit  is  closed  , a potential  diffrence  is  realized  between  the  two  nodes  connected  .This  causes  flow of  electrons  and  convection  current.

The resistance of a few meters of wire conductor in closed electrical circuit is?

Description : The resistance of a few meters of wire conductor in closed electrical circuit is?

Last Answer : The resistance of a few meters of wire conductor in closed electrical circuit is practically zero.

Resistance

Description : Resistance

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Temperature co-efficient of resistance is expressed in terms of?

Description : Temperature co-efficient of resistance is expressed in terms of?

Last Answer : Degree celsius

International ohm is defined in terms of the resistance of?

Description : International ohm is defined in terms of the resistance of?

Last Answer : International ohm is defined in terms of the resistance of a column of mercury.

When resistance element of a heater fuses and then we reconnect it ...

Description : When resistance element of a heater fuses and then we reconnect it after removing a portion of it, the power of the heater will?

Last Answer : When resistance element of a heater fuses and then we reconnect it after removing a portion of it, the power of the heater will increase.

Two bulbs of 500 W and 200 W rated at 250 V will have resistance ratio as?

Description : Two bulbs of 500 W and 200 W rated at 250 V will have resistance ratio as?

Last Answer : Two bulbs of 500 W and 200 W rated at 250 V will have resistance ratio as 2 : 5.

Resistance of a material always decreases if?

Description : Resistance of a material always decreases if?

Last Answer : Resistance of a material always decreases if number of free electrons available become more.

The hot resistance of the bulb's filament is higher than its cold resistance because...

Description : The hot resistance of the bulb's filament is higher than its cold resistance because the temperature co-efficient of the filament is?

Last Answer : This  is  because  resistance  of  a  conductor  increases  with  increase  in  temperature .

If a wire conductor of 0.2 ohm resistance is doubled in length, its resistance becomes?

Description : If a wire conductor of 0.2 ohm resistance is doubled in length, its resistance becomes?

Last Answer : If a wire conductor of 0.2 ohm resistance is doubled in length, its resistance becomes 0.4 ohm.

With rise in temperature the resistance of semi-conductors?

Description : With rise in temperature the resistance of semi-conductors?

Last Answer : With rise in temperature the resistance of semi-conductors decreases.

With rise in temperature the resistance of pure metals?

Description : With rise in temperature the resistance of pure metals?

Last Answer : With rise in temperature the resistance of pure metals increases.

The resistance of a conductor varies inversely as?

Description : The resistance of a conductor varies inversely as?

Last Answer : The resistance of a conductor varies inversely as area of cross-section.

Should I switch to a credit union?

Description : Should I switch to a credit union?

Last Answer : I switched from a bank to a credit union a long time ago. Competitive interest rates, fewer fees, easier loan approvals, better customer service.

How to Replace a Light Switch

Description : How to Replace a Light Switch

Last Answer : How to Replace a Light Switch They say it only takes one idiot to change a light bulb, but to change a light switch requires the skill and carefulness of a handyman. If you have a malfunctioning or a ... doesn't have to be a hassle. Just remember these steps and switching a new switch will be easy.

How to Install a Timer Switch

Description : How to Install a Timer Switch

Last Answer : How to Install a Timer Switch A timer switch is a handy device that automatically turns off a switch after a fixed period of time. This is particularly useful when you have kids at home ... safety precautions when installing switches or anything that might put you in the direct path of electricity.

How To Install A Dimmer Switch

Description : How To Install A Dimmer Switch

Last Answer : How To Install A Dimmer Switch Having a room with a bright light is good, but there are instances when you need the lights to be lower than what you're accustomed. You need to have a dimmer switch, ... your home. Follow them properly, and you'll be able to fiddle with the light levels in your home.

How to Wire a Three-Way Switch ?

Description : How to Wire a Three-Way Switch ?

Last Answer : How to Wire a Three-Way Switch A three-way switch is the most common system installed in residential areas. This system is used to control a light and receptacle or more from two different switches ... wires for interior use. #14 wires are suggested to be used for protected circuits at 15 amperes.

Draw & explain touch plate switch using IC555.

Description : Draw & explain touch plate switch using IC555.

Last Answer : It is construct form monostable multivibrator , when metal plates touch by finger then voltage at pin number 2 goes to below 1/3 Vcc then output of lower comparator becomes high hence flip flop set and ... then output of timer goes low and it low till up to the metal plates touch by finger .

Give the function of fuse and switch.

Description : Give the function of fuse and switch.

Last Answer : Functions of fuse:  * To break the circuit under fault condition.  * To provide overcurrent protection to the circuit.  * To provide short circuit protection to the circuit.  * To provide ...  * To make the electric circuit manually.  * To break the electric circuit manually.

State the function of : i) MCCB ii) ELCB iii) MCB iv) Switch.

Description : State the function of : i) MCCB ii) ELCB iii) MCB iv) Switch. 

Last Answer : i) MCB: Provide short circuit protection & over load protection to electrical loads.  ii) ELCB: Provides protection by detecting the unsafe magnitudes leakage currents flowing to earth and disconnecting ... rating.  iv) Switch: Make and break the electrical connection to the load manually.

Transfer switch

Description : Transfer switch

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

How rating of main switch and cable is selected for Industrial Installation.

Description : How rating of main switch and cable is selected for Industrial Installation.

Last Answer : 1. Rating of Main Switch or Fuse Rating is decided in industrial installation: Rating of main switch or fuse is based up the starting current of motor. For calculating starting current is considered 2 ... take 1.5 times the rated current or full load current. & thus cable rating is decided.

Earthing switch is used for?

Description : Earthing switch is used for?  (A) Measuring of safety voltage (B) Protection of equipment from ground faults (C) Discharging residual energies (D) All of the above 

Last Answer : Earthing switch is used for?  (A) Measuring of safety voltage (B) Protection of equipment from ground faults (C) Discharging residual energies (D) All of the above 

The device which allows reverse power flow and withstands highest switch frequency is

Description : The device which allows reverse power flow and withstands highest switch frequency is (A) GTO (B) MOSFET (C) IGBT (D) Inverter grade SCR

Last Answer : The device which allows reverse power flow and withstands highest switch frequency is MOSFET

A switch tail ring counter is made by using a single D-FF. The resulting circuit is

Description : A switch tail ring counter is made by using a single D-FF. The resulting circuit is (A) T-FF (B) D-FF (C) SR-FF (D) JK-FF

Last Answer : A switch tail ring counter is made by using a single D-FF. The resulting circuit is T-FF

The switch board instruments?

Last Answer : The switch board instruments should be mounted in vertical position.

If the centrifugal switch of a two-value capacitor motor using two capacitors fails to open then?

Last Answer : If the centrifugal switch of a two-value capacitor motor using two capacitors fails to open then Electrolytic capacitor will, in all probability, suffer break down.

Centrifugal switch disconnects the auxiliary winding of the motor at about what percent of synchronous speed?

Last Answer : Centrifugal switch disconnects the auxiliary winding of the motor at about 70 to 80 percent of synchronous speed.

In a single phase motor the centrifugal switch?

Last Answer : In a single phase motor the centrifugal switch disconnects auxiliary winding of the motor.

A centrifugal switch is used to disconnect starting winding when motor has?

Last Answer : A centrifugal switch is used to disconnect starting winding when motor has picked up about 50 to 70 per cent of rated speed.

A thermal protection switch can protect against?

Last Answer : A thermal protection switch can protect against overload.

Is thyristor a DC switch?

Last Answer : Yes ,it is one of the main advantage using thristors as a  switch in DC  circuit ,it has a high current gain

Is SCR unidirectional switch?

Last Answer : Yes, SCR is a unidirectional switch.

What are the desirable characteristics of ideal switch?

Description : What are the desirable characteristics of ideal switch?

Last Answer : Desirable characteristics of the ideal switch: It is desirable to have power switches characteristics closer to ideal switch. The ideal switch should have the following characteristics. Zero resistance when ... . 100% efficiency. Able to control power flow with zero power dissipation.

What is the difference between a switch and a relay?

Description : What is the difference between a switch and a relay?

Last Answer : Switch is simply a mechanical contact mechanism and relay is a electromagnetic switch . Switch can be direct mechanically turn on and off but relay can be operated by energising coil .

in which region BJT act as a switch?

Last Answer : BJT act as switch in saturation and  cutoff region ( ON state in saturation region and OFF state in cut-off region )

why IGBT is preferred as a power switch over both power BJT and MOSFET?

Last Answer : Because it has a higher switching frequency and heat tolerance.

Is it possible to convert tailights of a car to another models taillights? See description.

Description : Is it possible to convert tailights of a car to another models taillights? See description.

Last Answer : no. unless you’re really good at body work; you will have to weld, bend, etc for it to be even remotely possible.

What affect does the thickness of a wire have on its resistance?

Description : What affect does the thickness of a wire have on its resistance?

Last Answer : Ans: The resistance of a wire decreases as its thickness increases.

Which of these has the lowest resistance?

Description : Which of these has the lowest resistance?

Last Answer : b) Copper has the lowest resistance. 

Name two materials that have a different electric resistance.

Description : Name two materials that have a different electric resistance. 

Last Answer : Ans: a) copper, nichrome 

State the procedure for testing of earth pit resistance with necessary diagrams.

Description : State the procedure for testing of earth pit resistance with necessary diagrams.

Last Answer : Following procedure (Method) for testing of earth pit resistance with necessary diagrams. 1) Earth Tester : i) Three point method ii) Four point method 2) By Potential drop method 3 ... of that earthing pit. In this test the accuracy is less but electrical rods are not required. 

State the impact of inductance and resistance on transmission line performance

Description : State the impact of inductance and resistance on transmission line performance

Last Answer : Impact of inductance on transmission line: 1) It causes IXL drop in transmission line which affects regulation. 2) It is the only parameter which decides power transmission capacity of line i. ... is very small, it causes losses, temperature rise& poor voltage regulation so it cannot be neglected

What do you mean by exciting resistance and exciting reactance?

Description : What do you mean by exciting resistance and exciting reactance?

Last Answer : At no-load, a transformer behaves as a highly inductive load connected to the system which contains some resistance and inductance in parallel. The resistance is called exciting resistance R0 = V1/I w and reactance is called exciting reactance, X0 = V1/I mag

what is equivalent resistance when four 4 Ohm resistors are connected in i) series ii) parallel

Description : what is equivalent resistance when four 4 Ohm resistors are connected in i) series ii) parallel

Last Answer : equivalent resistance

role of the series resistance connected in PMMC movement.

Description : role of the series resistance connected in PMMC movement.

Last Answer : A PMMC Instrument can be used as voltmeter by just connecting a series resistance with the moving coil. This series resistance is called Voltmeter Multiplier. This combination of moving coil and ... current whose voltage is to be measured. Ideally the resistance of voltmeter should be infinite

Define resistance with its unit.

Description : Define resistance with its unit.

Last Answer : Resistance is a measure of the degree to which a substance impedes the flow of electric current induced by a voltage.  Or Resistance is the opposition to current flow in an electrical circuit. Unit is ohm.(Ω)