Describe advantages of torque converter over manual transmission system

Describe advantages of torque converter over manual transmission system
by

1 Answer

Answer :

Advantages of torque converter : 1. Torque converter varies gear ratio in the range of 3:1 to 1:1 in infinite no. of stages which gives uniform acceleration 2. No need of operating clutch & gear manually 3. It provides driving comfort to driver by avoiding manual interference of gear changing. 4. It allows starting & stopping vehicle without any difficulty.
by

Related questions

Describe with sketch construction of tubeless tyre & state its two advantages over Tube type

Description : Describe with sketch construction of tubeless tyre & state its two advantages over Tube type

Last Answer : This type of tyre does not need separate tube, instead the air under pressure is filled in the tyre for which purpose a non return valve is fitted to the rim. The tyre is directly mounted on the ... safety:- in case of puncture air defuses slowly which provide safety to driver as well as other.

Describe working of continuously variable transmission with suitable sketch

Description : Describe working of continuously variable transmission with suitable sketch

Last Answer : A Vario-drive consists of two set of split pulleys - drive and driven pulley and drive belt between the pulleys. The drive pulley is fitted to the crankshaft and driven to rear wheel ... driven pulley gets decreased thus a reduced drive ratio between the driven and drive pulleys is obtained.

Illustrate with the sketch functional relationship of major components of power transmission system

Description : Illustrate with the sketch functional relationship of major components of power transmission system

Last Answer : Fig:- major assembly & There location on chassis frame 1. Chassis Frame: - it is backbone of vehicle. all sub systems mounted on chassis frame 2. Engine:-it is heart of vehicle ... 7. Wheels & Tyres:-it carry weight of vehicle , transmit driving thrust, absorb road shocks

Describe with neat sketch working of full floating type.

Description : Describe with neat sketch working of full floating type.

Last Answer : Fig:- full floating Rear axle Explanation: The figure shows the full floating axle. The wheel is on the axle casing. Two roller bearings are between the wheel and axle casing. ... supported by the wheel and the axle casing. Fully floating rear axle is used in heavy commercial vehicles 

Describe a method of lubrication for rear axle assembly of the truck.

Description : Describe a method of lubrication for rear axle assembly of the truck.

Last Answer : The combined lubrication system is very important in the final drive axle, where load and or speed transferred are high, the combination of splash and force feed of lubricant is delivered to ... trickles down due to gravity into the sump, where it is collected again and the cycle repeats  

Describe with schematic diagram working of constant mesh gearbox

Description : Describe with schematic diagram working of constant mesh gearbox

Last Answer : -In constantmesh gearbox all the gears on the mainshaft are constantly mesh with layshaft gear & freely rotate on mainshaft. -When the clutch is in engaed position & gears ... than direction of mainshaft becomes reverse & reverse gear ratio obtained which is near about 3:1

Describe with sketch the method of lubrication of synchromesh gearbox

Description : Describe with sketch the method of lubrication of synchromesh gearbox

Last Answer : Splash lubrication system : The splash lubricating system is simple to manufacture and implement in synchromesh gearbox. Lay shaft gear revolutions splash up lubricant from the sump to provide adequate ... the gear box 3. Selector mechanism is lubricated by thin machine oil/engine oil

Describe with neat sketch construction details of clutch plate.

Description : Describe with neat sketch construction details of clutch plate.

Last Answer : Fig:- Single Plate Clutch Constructional details : It consist of steel plate with a splined central hub. Annular friction facing are attached to the steel plates by rivets. Special resins are ... are similar type of slots in each of the two plates situated on either side of the hub flang 

Describe the working of motorcycle clutch with neat sketch.

Description : Describe the working of motorcycle clutch with neat sketch.

Last Answer : Working : While the flywheel is rotating the pressure plates rotate and press against the friction plate. This causes the friction plates and thus the clutch shaft to rotate as well. When the pedal is ... they are not fully pressed by pressure plates. Thus the shaft also stops rotation. 

Describe with schematic sketch working of Vacuum operating clutch mechanism

Description : Describe with schematic sketch working of Vacuum operating clutch mechanism

Last Answer : Fig:- Vacuum Operated Clutch linkage -Vacuum operated clutch linkage operated by engine Vacuum created during suction stroke -It consists of vacuum reservoir tank connected to engine ... piston & plunger which further connected to release fork & release bearing as shown in fig

In modern car synchromesh gearbox is preferred over constant mesh gearbox. Justify its application with suitable illustration

Description : In modern car synchromesh gearbox is preferred over constant mesh gearbox. Justify its application with suitable illustration

Last Answer : Reason of synchromesh gear box preferred over constant mesh gearbox  1) No need of double declutching as in case of constant mesh gearbox.  2) Smooth engagement of higher gears due to synchromesh ... lay shaft gears to main shaft gear and then to the main shaft through synchronizer device 

Distinguish among radial ply, cross ply & belted bias types tyres

Description : Distinguish among radial ply, cross ply & belted bias types tyres

Last Answer : Sr. No. Radial ply tyre Cross ply tyre Belted bias Type  1 Plies are running radially straight from bead to bead Piles are running diagonally opposite from bead to bead. The basic construction is ... tyre. Costlier than radial ply & cross ply tyre 8

What are the different materials used for clutch lining? State its necessity.

Description : What are the different materials used for clutch lining? State its necessity.

Last Answer : Material:- 1. Leather 2. Cork 3. Fabric 4. Asbestos 5. Reybestos and Ferodo 6. Non- asbestos clutch lining material Necessity:- 1. It should have good anti fading characteristic 2. It should have longer life. 3. It should be nonpolluting. 4. It should have lesser cost

Compare dry clutch & wet clutch on basis of

Description : Compare dry clutch & wet clutch on basis of

Last Answer : Parameter Dry Clutch Wet Clutch Construction When the clutch is operated dry i.e. without oil, it is called as a dry clutch. When the clutch is operated in an oil bath, it is ... , Bus, Truck etc. Multi-plate clutch is used in motor cycles, racing cars, heavy duty vehicles.

Sketch a layout of Front Engine Rear Wheel Drive vehicle & label the major parts

Description : Sketch a layout of Front Engine Rear Wheel Drive vehicle & label the major parts

Last Answer : Fig:- Front EngineRear Wheel Drive Vehicle Layout

Explain construction of Hotchkiss drive with suitable sketch

Description : Explain construction of Hotchkiss drive with suitable sketch

Last Answer : Hotchkiss drive: Explanation: Construction:- This drive is invented by Albert Hotchkiss. In the Hotchkiss drive two universal joints are used one at front and second at rear end of propeller shaft ... torque reaction leaf spring deflects. It is used in heavy duty vehicles like bus and trucks.

Explain any one type of Frame section with neat sketch

Description : Explain any one type of Frame section with neat sketch

Last Answer : four section of chassis frame with their merits Channel Section: The channel section is used for making the long members of the frame. It provides a good resistance to bending. It is poor ... to torsional loading (twisting) and they shall not use in the cases where torsion is dominant. 

Explain the concept of Aspect Ratio.

Description : Explain the concept of Aspect Ratio.

Last Answer : Aspect Ratio: The aspect ratio of a tyre is the height of the tyre sidewall expressed as a percentage of the tyre’s width. For example, a tyre with a profile/aspect ratio of 65, is a tyre whose height is equal to 65% of its width. 

State the function of Slip joint & universal Joint

Description : State the function of Slip joint & universal Joint

Last Answer : 1)Slip joint Functions: When the rear wheel comes across a bump, the spring compresses or expands as the differential with the rear axle housing and the wheel moves up and down. This ... drive changes continuously and universal joint allows transmission of power and rotary motion at a varied angle

State the purpose of Transfer case

Description : State the purpose of Transfer case

Last Answer : 1. Transfer case is used in four wheel drive vehicle along with main gearbox to transmit torque and power to the rear axle. 2. It enables the driver to drive the vehicle in two wheel drives on ... applications.  3. It also enables to drive the vehicle in high gear or low gear whenever required.

Write a function of Automobile Clutch

Description : Write a function of Automobile Clutch

Last Answer : To engage and disengage the engine power from transmission as required when the vehicle is to stop by applying brakes. To facilitate the easy gear shifting from 1st to 2nd or from ... in transmission by providing suitable means. To reduce the vibrations during high speed power transmission

Enlist different material used in Frames

Description : Enlist different material used in Frames

Last Answer : 1) Mild steel 2) Carbon steel 3) Nickel alloy steel 4) Aluminum alloy. 02 

State the necessity of Frame in Automobile.

Description : State the necessity of Frame in Automobile.

Last Answer : 1. To support the body and chassis components such as engine, gear box, axles, suspension system, braking system etc. 2. To withstand different types of loads acting on it

How do you fix torque converter clutch circuit stuck on?

Description : How do you fix torque converter clutch circuit stuck on?

Last Answer : Feel Free to Answer

The pump impeller and the turbine runner in a hydraulic torque converter (A) Have the same diameter (B) Have different diameters (C) Are directly coupled (D) None of these

Description : The pump impeller and the turbine runner in a hydraulic torque converter (A) Have the same diameter (B) Have different diameters (C) Are directly coupled (D) None of these

Last Answer : (B) Have different diameters

What are the advantages of computerized file over manual file?

Description : What are the advantages of computerized file over manual file?

Last Answer : [object Object]

What are the advantages of computerized file over manual file?

Description : What are the advantages of computerized file over manual file?

Last Answer : [object Object]

What are the advantages of single phase bridge converter over single phase mid-point converter?

Description : What are the advantages of single phase bridge converter over single phase mid-point converter?

Last Answer : a. SCRs are subjected to a peak-inverse voltage of 2Vm in a fully controlled bridge rectifier. Hence for same voltage and currnt ratings of SCrs, power handled by mid-point configuration is about ... load power. As such, the transformer rating in mid-point converter is double the load rating.

In voltage source converter based HVDC transmission system the active power is controlled by changing

Description : In voltage source converter based HVDC transmission system the active power is controlled by changing (A) phase angle of the converter ac input voltage (B) supply frequency of the converter ac input voltage (C) magnitude of the converter ac input voltage (D) DC voltage at the inverter terminals

Last Answer : In voltage source converter based HVDC transmission system the active power is controlled by changing phase angle of the converter ac input voltage

In your opinion, why are auto makers phasing out the manual transmission on a lot of their vehicles?

Description : In your opinion, why are auto makers phasing out the manual transmission on a lot of their vehicles?

Last Answer : I know a few people will turn their nose up and huff, by saying automatic transmissions are now just as economical as a manual so why bother with a manual. BUT, that doesn’t really answer the question, are they scaling back or phasing out because people have lost the skill, or are to lazy?

How hard was it for you to learn to drive manual transmission?

Description : How hard was it for you to learn to drive manual transmission?

Last Answer : Well. I learned just not well. Tore out my boyfriends clutch and coasted into someone on a hill. I stick to an automatic now lol

How do I use a manual transmission?

Description : How do I use a manual transmission?

Last Answer : It’s one of those things you must just do.

If you drive a vehicle with a manual transmission, do you have trouble explaining to people why ?

Description : If you drive a vehicle with a manual transmission, do you have trouble explaining to people why ?

Last Answer : No, it is quite simple. 1. Manuals are for people who enjoy driving. My car can do 82 in second gear, with a 1.3L engine. The auto version is one of the most sluggish cars ever made. 2 ... to be different, but I really do like manuals a lot more than any other transmission. I particularly hate CVTs.

How much better is the gas milage for a manual transmission?

Description : How much better is the gas milage for a manual transmission?

Last Answer : answer:5-15% according to Wikipedia, although driver style definitely factors in. Wikihow also highlights power advantages of manual transmission in that you'll be able to utilize the full range ... Variable Transmission (CVT) somewhere in between automatic and manual in terms of fuel efficiency.

For Honda civic dx owners I have a 94 Honda civic dx manual transmission sometimes I have to go into first and pull forward a wee bit before going in reverse. Does anyone have to do this with there Honda?

Description : For Honda civic dx owners I have a 94 Honda civic dx manual transmission sometimes I have to go into first and pull forward a wee bit before going in reverse. Does anyone have to do this with there Honda?

Last Answer : answer:I used to own a 89 Civic LX, with manual transmission, and at one point, it did what you're describing; if I recall, the situation worsened as the clutch/clutch plate began to fail (a ~$300 ... be a defect there and a recall you may not be aware of-worth looking into at the very least.

What type of transmission fluid do I put in a 1994 Toyota Camry manual transmission?

Description : What type of transmission fluid do I put in a 1994 Toyota Camry manual transmission?

Last Answer : The MANUAL transaxle does not use Transmission Fluid. All 1994Toyota manual transaxles use API GL-4 or GL-5 (oil grade), 75W-90or 80W-90 (viscosity) gear oil. DO NOT USE TRANSMISSION FLUID whichis meant for an automatic transaxle.

Does the STI WRX come in both manual and automatic transmission?

Description : Does the STI WRX come in both manual and automatic transmission?

Last Answer : The STI, which is a version of the Subaru Impreza WRX, only comes with manual transmission. The normal Impreza WRX does come in both versions, just not the STI model

Hydraulic torque transmission system is analog of?

Description : Hydraulic torque transmission system is analog of?

Last Answer : Hydraulic torque transmission system is analog of motor-generator set.

What are the advantages of using logical spool servers? Note: there are 2 correct answered to this question A. You can create more output devices B. You can balance the load across multiple physical spool servers C. You can minimize the load on physical devices D. You can minimize the manual adjustment of output device definitions after the transport

Description : What are the advantages of using logical spool servers? Note: there are 2 correct answered to this question A. You can create more output devices B. You can balance the load across ... on physical devices D. You can minimize the manual adjustment of output device definitions after the transport

Last Answer : B. You can balance the load across multiple physical spool servers C. You can minimize the load on physical devices

What are the advantages of six pulse converter?

Description : What are the advantages of six pulse converter?

Last Answer : a. Commutation is made simple. b. Distortion on the ac side is reduced due to the reduction in lower order harmonics. c. Inductance reduced in series is considerably reduced.

What are the advantages of the use of frequency converter instead of star-delta or soft starter?

Description : Can you guys explain the advantages of frequency converter against the star delta or soft starter?

Last Answer : ¬Soft starters  A soft starter is, as you would expect, a device which ensures a soft starting of a motor. A softstarter has different characteristics to the other starting ... at rated current from zero to full speed. Frequency converters are becoming cheaper all the time.

What are the torque specs for transmission pan bolts?

Description : What are the torque specs for transmission pan bolts?

Last Answer : 12ft. lbs. From the Haynes Techbook, General Motors AutomaticTransmission Overhaul. Page 8D-42

Cotter joint is going to be use to connect the two rods for torque transmission purpose. a) True b) False

Description : Cotter joint is going to be use to connect the two rods for torque transmission purpose. a) True b) False

Last Answer : b) False

Cotter joint can be used to connect two rods for torque transmission purpose. true /false. a) True b) False

Description : Cotter joint can be used to connect two rods for torque transmission purpose. true /false. a) True b) False

Last Answer : b) False

Cotter joint can be used to connect two rods for torque transmission purpose. a) True b) False

Description : Cotter joint can be used to connect two rods for torque transmission purpose. a) True b) False

Last Answer : b) False

Axle is frequently used in torque transmission. a) True b) False

Description : Axle is frequently used in torque transmission. a) True b) False

Last Answer : b) False

Axle is frequently used in torque transmission. a) True b) False

Description : Axle is frequently used in torque transmission. a) True b) False

Last Answer : b) False

The loads supported by an automobile frame are……….. a) Weight of the body and Passengers. b) Torque from engine and Transmission. c) Sudden Impact from Collision d) All of the above.

Description : The loads supported by an automobile frame are……….. a) Weight of the body and Passengers. b) Torque from engine and Transmission. c) Sudden Impact from Collision d) All of the above.

Last Answer : d) All of the above.

Axle is frequently used in -----------------transmission. a) torque b) twist c) force d) direct

Description : Axle is frequently used in -----------------transmission. a) torque b) twist c) force d) direct

Last Answer : a) torque

In power transmission equation, P=2ΠNT/60×1000 a. P is in kw and T is maximum torque b. P is in NM/sec and T is maximum torque c. P is in NM/sec and T is mean torque d. P is in kw and T is mean torque

Description : In power transmission equation, P=2ΠNT/60×1000 a. P is in kw and T is maximum torque b. P is in NM/sec and T is maximum torque c. P is in NM/sec and T is mean torque d. P is in kw and T is mean torque

Last Answer : d. P is in kw and T is mean torque