Describe working of two wheeler charging system with labeled sketch

Describe working of two wheeler charging system with labeled sketch
by

1 Answer

Answer :

Working of charging system of two wheeler: The main components of two wheeler charging system are- 1.Battery 2.Regulator cum rectifier unit (Regulator and rectifier are assemble in one unit) 3. Generator (Magneto) assembly 4. Fuse 1) Generator produces an A.C. supply of 12 V. 2) Blue / white (L/W) wire supplies 12 V A.C. from generator to regulator cum rectifier unit. 3) Regulator controlled the supply of current and voltage whereas rectifier converts A.C. supply in to D.C. 4) Regulator cum rectifier unit supply 12-14.5 V D.C. to the battery with the help of filament type fuse. 5) This fuse is having capacity to deliver 12 V to 16 V and 15 A current. 6) In case of failure of fuse it disconnects the supply from regulator cum rectifier to battery.

image  

by

Related questions

Describe role of crash bar and saree guard in two wheeler safety.

Description : Describe role of crash bar and saree guard in two wheeler safety.

Last Answer : The role of i) Crash bar: Crash bars aim to protect motorcycle engines and body panels as well as it is used to protect the rider. It is also used as a mount point for accessories like highway ... guards will not only protect the rider, but also the cargo from being pulled into the rear wheel. 

Describe ergonomic aspects of seat arrangement of two wheeler.

Description : Describe ergonomic aspects of seat arrangement of two wheeler.

Last Answer : ergonomic aspects of seat arrangement of two wheeler: The design of the motorcycle is limited by the physical constraints of making the machine work. Comfort and ease of use, and ultimately your safety, ... spring & leather) to protect both rider & pillion rider from shocks & vibrations on road. 

Describe procedure to adjust valve clearance of four stroke engine of two wheeler with necessary sketches.

Description : Describe procedure to adjust valve clearance of four stroke engine of two wheeler with necessary sketches.

Last Answer : Procedure: 1) Remove the valve cover according to your shop manual's instructions. Don't try to hammer a screwdriver or chisel between the valve cover and the head. You will ruin the gasket surface in a ... When the clearance feels good, hold the adjusting screw, and tighten up the lock nut. 

Describe working of constant mesh gear box with neat sketch.

Description : Describe working of constant mesh gear box with neat sketch.

Last Answer : Working of constant mesh gear box: A simplified diagram of constant mesh box has been shown in Figure. In this gear box, all gears on the main transmission shaft are constantly connected to corresponding ... In this way by sliding the second dog clutch, second and first gears are obtained.

List materials used for two wheeler frame.

Description : List materials used for two wheeler frame.

Last Answer : The use of steel tubing is still common. In modern times other materials, such as titanium, aluminium, magnesium, and carbon-fibre, along with composites of these materials, are now used.

Explain with sketch working of electronic petrol injection system. State its advantages over carbureted fuel system.

Description : Explain with sketch working of electronic petrol injection system. State its advantages over carbureted fuel system. 

Last Answer : Working of Electronic Fuel injection system: Because mechanical injection systems have limited adjustments to develop the optimal amount of fuel into an engine that needs to operate under a variety of different ... (acceleration). 7. Compact design of fuel supply system. 8. Modular design

Describe mono-shock regular swing arm suspension system with neat sketch.

Description : Describe mono-shock regular swing arm suspension system with neat sketch.

Last Answer : Mono-shock Regular swing arm : Original technology of mono-shock comes from the racing world where motor cycles compete in most extreme conditions. More advanced version of this technology is employed in these ... only one shock to adjust, and there is no worry about matching two shocks.   

Describe push rod overhead valve operating mechanism with neat sketch.

Description : Describe push rod overhead valve operating mechanism with neat sketch.

Last Answer : Push rod Overhead valve operating mechanism (OHV 4 -S engine): An overhead valve engine (OHV engine) is an engine in which the valves are placed over the cylinder head. The camshaft drive-chain ... . Overhead valve arrangement makes the engine slightly shorter than overhead camshaft.   OR  

Describe constructional details of single cradle frame with neat sketch.

Description : Describe constructional details of single cradle frame with neat sketch.

Last Answer : Single cradle frame :  The single cradle is the simplest type of motorcycle frame, and looks similar to the first ever motorcycle frames. It is made from steel tubes that surround the engine with a main ... found in off-road motorcycles.  Figure: Typical motor cycle frame of cradle type

Describe working of capacitive discharge ignition (CDI) system

Description : Describe working of capacitive discharge ignition (CDI) system

Last Answer : Working of CDI system: It mainly consists of 6-12 V battery, ignition switch, DC to DC convertor, charging resistance, tank capacitor, Silicon Controlled Rectifier (SCR), SCR-triggering device; step ... of AC to DC charging device, signal conditioning and amplifying unit and control circuit.   

Explain with block diagram working of microprocessor controlled ignition system.

Description : Explain with block diagram working of microprocessor controlled ignition system.

Last Answer : The microprocessor controlled ignition system uses input from sensors like crankshaft position sensor, oil temperature sensor, ignition trigger coil and throttle position sensor. The ignition module/ ... the ignition module / microprocessor enables the spark to be timed accurately.  

Describe effects of frontal area exposed in motor cycle on performance of vehicle.

Description : Describe effects of frontal area exposed in motor cycle on performance of vehicle. 

Last Answer : The amount of drag an object is subjected to comes from two things; the frontal area of the Motorbike and what's called its drag co-efficient. The frontal area of motor cycle involves ... mud guard which reduce the frontal area will improve the performance reducing air resistance called air drag. 

State any two types of muffler with their application.

Description : State any two types of muffler with their application.

Last Answer : Applications of muffler: 1. Baffle type - Used in motor cycle. Straight baffle type muffler is used in those motor cycles who like their bikes to be loud and Quiet baffle type muffler is used in regular ... sound is produced and need to be reduce. e.g. High cc bikes like Royal Enfield etc.  

Select a tyre for sports bike and justify it with illustrations.

Description : Select a tyre for sports bike and justify it with illustrations.

Last Answer : Criteria for selecting tyre for Sports bike : 1. Road Grip: It should have a very good grip of road surface on hot/ cold/ wet/ dry/ gravel road surface while travelling straight or cornering. 2. ... Tubeless Tyre (TT) Tyre pressure: front- 32 psi and rear 36 to 38 psi High sectional width  

Explain with sketches effect of steering geometry on vehicle performance.

Description : Explain with sketches effect of steering geometry on vehicle performance.

Last Answer : The performance of vehicle is affected by steering geometry as turning ability . maneuverability , stability etc. The effects are due to change in the steering geomentry parameters like trail, cater angle or ... of dropping of steering head also increases with larger rack angles

Explain with relevant justification that use of catalytic convertor reduce the tail pipe emissions.

Description : Explain with relevant justification that use of catalytic convertor reduce the tail pipe emissions.

Last Answer : The emissions from exhaust of vehicle are pollutants like Carbon monoxide (CO), Un-burnt Hydro carbon (UBHC), and oxides of nitrogen (NOx) without any after treatment device. Use of catalytic ... to carbon dioxide. In this way catalytic convertor converts more harmful gases into less harmful gases.

Select a material for a frame of 350 CC motorcycle and justify its use.

Description : Select a material for a frame of 350 CC motorcycle and justify its use.

Last Answer : The material used for heavy duty motor cycle like 350 cc motor cycle depends upon design, strength and type of frame being used. Generally, Steel is commonly used material due to reasons like joining of ... known as AISI4140 steel. The some parts are made of aluminum alloy to reduce the weight.  

“Driving habits are closely associated with drivers safety” justify this statement with illustrations.

Description : “Driving habits are closely associated with drivers safety” justify this statement with illustrations.

Last Answer : Driving habits are closely associated with drivers safety because drivers do not follow the following good driving habits accidents are likely to occur. i) Drivers habit to wear day night goggle will ... vehicle in economy mode not only ensures the fuel economy but also helps to improve safety. 

“Ergonomics plays an important role in passenger comfort” justify this statement with illustrations.

Description : “Ergonomics plays an important role in passenger comfort” justify this statement with illustrations.

Last Answer : Ergonomics plays an important role in ensuring complete comfort for the driver and the passenger, ensuring smooth journey, and maximizing experience. Ergonomics is the process of designing or arranging ... involves study of human seating posture, human body dimensions etc. During ride the vehicle  

“Indicator lamps play an important role in vehicle safety” justify this statement with suitable illustrations.

Description : “Indicator lamps play an important role in vehicle safety” justify this statement with suitable illustrations.

Last Answer : Indicator lamps are used for indicating others the intention of driver for turning the vehicle in particular direction before the actual turning is started. Without the indicator lamps it would not be ... distance and making the other drivers alert for the same. It thereby avoid the accident.  

Define: (i) Trail , (ii) Caster angle

Description : Define: (i) Trail , (ii) Caster angle

Last Answer : i) Trail: Trail refers to distance between imaginary point where the steering axis intersect the ground and the centre of tyre contact point. Measured length between the imaginary point and centre of front tyre ... in the plane of the wheel is called the caster angle. It ranges from 20 to 80. 

State functions of carburetor.

Description : State functions of carburetor.

Last Answer : The main functions of the carburettor are: 1) To keep a small reserve of fuel at a constant head. 2) To vaporize the fuel to prepare a homogeneous air fuel mixture. 3) To supply correct amount of the air fuel mixture at the correct strength under all conditions of load and speed.

Enlist features of tubular frame.

Description : Enlist features of tubular frame.

Last Answer : Feature of tubular frame: 1) It acts as a beam supported by the wheels to carry the weight of the propelling machinery and the rider. 2) It provides a non-flexing mount for the engine suspension and wheel. 3) It provides free steering movement of the front wheel

Draw a labeled sketch of pump feed fuel supply system for petrol engine and state location and function of each component.

Description : Draw a labeled sketch of pump feed fuel supply system for petrol engine and state location and function of each component.

Last Answer : The pump feed system is shown in the figure above. Fuel tank is for storage of fuel located above the engine of two wheeler and in case of car located at backside of the car ... the tendency of forming vapor lock. The system provides the fuel requirement at various engine speeds efficiently. 

Draw a labeled block diagram of CNG conversion Kit. Describe it’s working

Description : Draw a labeled block diagram of CNG conversion Kit. Describe it’s working

Last Answer : Working of CNG Kit: The Sequential Injection system still has a high pressure tank, filler, filter and regulator, the regulator is different in that it puts out a steady pressure as opposed ... , natural gas temperature sensor and coolant temperature sensor to operate and control the system.  

Draw a labeled block of LPG conversion kit. Describe its working.

Description : Draw a labeled block of LPG conversion kit. Describe its working.

Last Answer : Working of CNG Kit: The Sequential Injection system still has a high pressure tank, filler, filter and regulator, the regulator is different in that it puts out a steady pressure as opposed ... , natural gas temperature sensor and coolant temperature sensor to operate and control the system.

Explain the requirements of good formwork with names and materials proposed for beam of size 300 X 450 mm with neat labeled sketch.

Description : Explain the requirements of good formwork with names and materials proposed for beam of size 300 X 450 mm with neat labeled sketch.  

Last Answer : Requirements of good formwork:- 1. It should be adequately strong to withstand an extensive variety of dead and live loads. For instance, self-weight, weight of reinforcement, weight of wet concrete, loads of ... of concreting. 8. It should be lightweight. 9. It should be easy to remove.

Draw neat labeled sketch of ply press.

Description : Draw neat labeled sketch of ply press.

Last Answer : sketch of ply press

Draw a neat labeled sketch of 30m chain.

Description : Draw a neat labeled sketch of 30m chain.

Last Answer : neat labeled sketch of 30m chain

Draw labeled sketch of prismatic compass.

Description : Draw labeled sketch of prismatic compass.

Last Answer : Sketch of prismatic compass :

Draw simple labeled sketch showing forging sequence for manufacturing Crank Shaft.

Description : Draw simple labeled sketch showing forging sequence for manufacturing Crank Shaft.

Last Answer : Forging Sequence for Manufacturing Crank Shaft: [1] Stock is redistributed and size is increased at certain place and reduced at other place by roll forging. [2] After preliminary roll forging, ... Then the finished part is then trimmed in blanking die to remove excess metal or flash.   

Draw neat and labeled sketch of three pass packages type boiler.

Description : Draw neat and labeled sketch of three pass packages type boiler. 

Last Answer : Each set of tubes that hot combustion flue gas travels through before making a turn within the boiler, is considered a "pass." A 3-pass fire tube boiler design consists of three sets of ... design that allows more heat transfer time to deliver the same or higher efficiency rating. 

Draw a neat labeled sketch of the following: i) Aqueduct ii) Super passage iii)Level crossing

Description : Draw a neat labeled sketch of the following: i) Aqueduct ii) Super passage iii)Level crossing

Last Answer : i) Aqueduct  ii) Super passage Iii ) Level Crossing

Describe the working of water/liquid cooling system with neat sketch.

Description : Describe the working of water/liquid cooling system with neat sketch.

Last Answer : A water-cooled engine block and cylinder head have interconnected coolant channels running through them. At the top of the cylinder head all the channels converge to a single outlet. A pump, driven by a ... speed increases. There is no necessity of maintaining the water up to a correct level.  

Describe construction and working of TBI system with suitable sketch.

Description : Describe construction and working of TBI system with suitable sketch.

Last Answer : Construction and working of TBI system: Throttle Body Injection is an electronically controlled injection system in which an electronic fuel injector injects the fuel intermittently in to the intake manifold ... to calculate the triggering signals for the injectors and other system actuators.

Describe with neat sketch working of air compressor used in automobile workshops. State its two advantages

Description : Describe with neat sketch working of air compressor used in automobile workshops. State its two advantages

Last Answer : As shown in ig. Shows two stages reciprocating air compressor with water cooled and intercooler First of all fresh air is sucked from atmosphere in low pressure (L.P) cylinder during its suction ... :  1) Less power is required to drive the compressor.  2) Higher volumetric efficiency 

Describe the working of collapsible steering column with sketch.

Description : Describe the working of collapsible steering column with sketch.

Last Answer : Collapsible steering column: Working: The design of these columns is such that they collapse due to impact forces caused during head-on collision of the vehicle. The collapsing columns ... Arrangement of a ball type collapsible steering column in normal mode and in collapsed condition. 

Describe the working of recirculating ball type steering gear box with sketch.

Description : Describe the working of recirculating ball type steering gear box with sketch.

Last Answer : Working of Recirculating ball type steering gear box: It consists of worm at the end of steering rod. A nut is mounted on the worm with two sets of balls in the grooves of the worm, in between ... and actual the link rod through the drop arm, resulting in the desired steering of the wheels.

Describe with neat sketch the working of “Air Suspension”

Description : Describe with neat sketch the working of “Air Suspension”

Last Answer : Working: An air compressor takes the atmospheric air through a filter and compresses it to a pressure of about 240 MPa, at which pressure the air in the accumulator tank is maintained, which ... air gets further compressed and absorbs the shock when the wheel encounters a bump on the road. 

Describe working of Stabilizer bar with neat sketch

Description : Describe working of Stabilizer bar with neat sketch 

Last Answer : Stabilizer (Anti Roll) Bar: Working: When the wheel strikes a bump, it starts vibrating up & down, thus exerting torque on the bar, which acts as a spring. When one road wheel is ... obviate this tendency, a stabilizer is used in car suspension system. It prevents lateral swaying.  

Describe with neat sketch the construction and working of surface condenser

Description : Describe with neat sketch the construction and working of surface condenser

Last Answer : Construction- It consists of horizontal cast iron cylindrical vessel pack with tubes, through which the cooling water flows. The ends of the condenser are cut off by vertical perforated type plates into ... ; the secondary function of condenser is to supply pure and hot feed water to boiler.  

Describe with neat sketch of working of bomb calorimeter

Description : Describe with neat sketch of working of bomb calorimeter

Last Answer : working of bomb calorimeter:   The calorimeter is made of austenitic steel which provides considerable resistant to corrosion and enables it to withstand high pressure. In the calorimeter use of a strong ... the calorimeter. From the above data the calorific value of the fuel can be found.  

Describe with neat sketch working of full floating type.

Description : Describe with neat sketch working of full floating type.

Last Answer : Fig:- full floating Rear axle Explanation: The figure shows the full floating axle. The wheel is on the axle casing. Two roller bearings are between the wheel and axle casing. ... supported by the wheel and the axle casing. Fully floating rear axle is used in heavy commercial vehicles 

Describe the working of motorcycle clutch with neat sketch.

Description : Describe the working of motorcycle clutch with neat sketch.

Last Answer : Working : While the flywheel is rotating the pressure plates rotate and press against the friction plate. This causes the friction plates and thus the clutch shaft to rotate as well. When the pedal is ... they are not fully pressed by pressure plates. Thus the shaft also stops rotation. 

Describe working of continuously variable transmission with suitable sketch

Description : Describe working of continuously variable transmission with suitable sketch

Last Answer : A Vario-drive consists of two set of split pulleys - drive and driven pulley and drive belt between the pulleys. The drive pulley is fitted to the crankshaft and driven to rear wheel ... driven pulley gets decreased thus a reduced drive ratio between the driven and drive pulleys is obtained.

Describe with schematic sketch working of Vacuum operating clutch mechanism

Description : Describe with schematic sketch working of Vacuum operating clutch mechanism

Last Answer : Fig:- Vacuum Operated Clutch linkage -Vacuum operated clutch linkage operated by engine Vacuum created during suction stroke -It consists of vacuum reservoir tank connected to engine ... piston & plunger which further connected to release fork & release bearing as shown in fig

Describe working principle of 4 – Stroke Petrol (Engine) with sketch

Description : Describe working principle of 4 – Stroke Petrol (Engine) with sketch

Last Answer : Working of four stroke petrol engine: 1. Suction stroke: During this stroke, inlet valve is open and exhaust valve is closed. The piston moves from TDC to BDC and crank shaft rotates ... gases outside the combustion chamber. Crankshaft rotates by two complete revolutions through 7200 .

Describe the working of four stroke C. I. engine with neat sketch.

Description : Describe the working of four stroke C. I. engine with neat sketch. 

Last Answer : Working principle of CI engine: 1. Suction stroke: During this stroke, inlet valve is open and exhaust valve is closed. Only air is sucked into cylinder during this stroke. The ... burnt gases outside the combustion chamber. Crankshaft rotates by two complete revolutions through 720˚. 

With the help of suitable sketch describe the working of pressure regulator.

Description : With the help of suitable sketch describe the working of pressure regulator.

Last Answer : Working of pressure regulator : The fuel pump provides more fuel than the maximum required by the engine. Fuel not used by the engine is returned to the fuel tank. The fuel rail supplies all injectors. The pressure ... between 2.0 and 3.5 bar and allows excess fuel to return to the fuel tank.

Describe the working of EGR valve with neat sketch.

Description : Describe the working of EGR valve with neat sketch.

Last Answer : Answer: Exhaust Gas Recirculation Valve (Operation-2 marks, Sketch-2 marks) When the engine is idling, the EGR valve is closed and there is no EGR flow into the manifold. The EGR valve remains closed ... exhaust gas (less than 10% of total) to be supplied into the incoming air: fuel mixture