Description : In a semi permanent (BG) diversion the gradient should not be steeper then (a) 1 in 75 (b) 1 in 125 (c) 1 in 100* (d) 1 in 150
Last Answer : (c) 1 in 100*
Description : In a semi permanent (BG) diversion the gradient should not be steeper then (a) 1 in 75 (b) 1 in 125 (c) 1 in 100 * (d) 1 in 150
Last Answer : (c) 1 in 100 *
Description : Number of Elastic clips used for one K to BG single line section having 13 length & concrete sleepers of M+7 sleeper density are (a) 5280 (b) 6160* (c) 6250 (d) 6500
Last Answer : (b) 6160*
Description : Number of sleepers required having sleeper density of M+7 for one Km of BG single line is (a) 1360 (b) 1540* (c) 1660 (d) None of the above
Last Answer : (b) 1540*
Description : In M+7 sleeper density, how many sleepers are there in a km Track. a. 1660 nos b. 1540 nos.* c. 1310 nos. d. 1440 nos.
Last Answer : b. 1540 nos
Description : Sleeper density for group ‘A’ route with traffic density more than 20 GMT is:- (a) 1560 sleepers/ Km. (b) 1660 sleepers/ Km.* (c) 1540 sleepers/ Km. (d) 1340 sleepers/ Km.
Last Answer : (b) 1660 sleepers/ Km.*
Description : “Composite sleeper index” is employed to determine a) sleeper density requirement b) number of fixtures required for a particular type of sleeper c) durability of sleeper d) mechanical strength of wooden sleepers and thereby gives its suitability as to be used as li sleepers.*
Last Answer : d) mechanical strength of wooden sleepers and thereby gives its suitability as to be used as li sleepers.*
Description : Temporary arrangements for rebuilding of Railway bridges can be executed by providing a) Temporary girder b) Temporary diversion c) Any of the above* d) None of the above
Last Answer : c) Any of the above*
Description : 1. Which of the statements with regard to formation is correct (1) One of the Functions of the formation is to facilitate drainage (2) Width of bank for double railway line is 12.155 meters (3) Width of cutting for double railway track is 11. ... a) 2, 3, 5 b) 3, 4, 5* c) 2, 3, 4 d) 2, 4, 5
Last Answer : b) 3, 4, 5*
Description : Minimum length of steel channel sleeper in BG a) 2500mm b) 2440mm* c) 2400mm d) 2600mm
Last Answer : b) 2440mm*
Description : Minimum depth of ballast cushion below the bottom of sleeper at the rail seat on BG group A route should be :- (a) 350 mm. (b) 250 mm. (c) 300 mm.* (d) 325 mm.
Last Answer : (c) 300 mm.*
Description : Lowest level of staff/supervisor competent for packing or renewal of single isolated sleeper not requiring lifting or slewing of track in LWR/CWR. a. PWI b. Keyman c. Gangmate* d. PWS
Last Answer : c. Gangmate*
Description : Min. breaking load of 60kg weld during transverse breaking load test is? (i) 110 MT (ii) 115 MT* (iii) 90 MT (iv) 120 MT
Last Answer : (ii) 115 MT*
Description : Min. breaking load of 52kg weld during transverse breaking load test is? (i) 90MT* (ii) 100 MT (iii) 110 MT (iv) 120 MT
Last Answer : (i) 90MT*
Description : Min. authority to be Incharge of lorry. (a) Keyman (b) Mate (c) PWS* (d) none of these (19) UCC is abbreviated for
Last Answer : (c) PWS*
Description : Plasticity index represents the range of water content between a) Liquid and plastic limit * b) Plastic limit and semi solid limit c) Semisolid Limit and liquid limit d) Liquid limit and solid limit.
Last Answer : a) Liquid and plastic limit *
Description : For railway bridges with spans in excess of 30.5m, generally provided with a) deck type girders b) open web through girders* c) semi through girders d) shallow type girders
Last Answer : b) open web through girders*
Description : The load transferred from rails to web of girders is in a) deck type girder b) through type girder c) semi-through type girder* d) plate girder
Last Answer : c) semi-through type girder*
Description : The load transferred from rails to bottom flanges is in a) deck type girder b) through type girder* c) semi-through type girder d) plate girder
Last Answer : b) through type girder*
Description : In case of LWR track, full ballast section as specified in LWR Manual should be provided up to ……….. from the bridge abutment. a) 200 m b) 50 m c) 300 m d) 100 m*
Last Answer : d) 100 m
Description : Formation width for banks for B.G. single line section is (a) 6.10 m (b) 6.50 m (c) 6.85 m* (d) 7.0 m
Last Answer : (c) 6.85 m*
Description : Effective depth of septic tank of 10 users is about (a) 1.0 m () 1.2 m* (c) 1.7 m (d) 2.0 m
Last Answer : b) 1.2 m*
Description : Height gauges should be located at a minimum distance of….. from gate post. (a) 5 m (b) 7.5m (c) 8m* (d)10m
Last Answer : (c) 8m*
Description : The maximum dry density to which a soil may be compacted to depends upon a) Soil water content * b) The process of compaction c) The voids ratio d) Is independent of the type of soil
Last Answer : a) Soil water content *
Description : The dry density of soil is a) Always greater than the saturated density b) Weight of soil solids per unit of total volume prior to drying* c) Total weight of soil solids per unit of its total volume d) Total weight of soil mass per unit of its total volume
Last Answer : b) Weight of soil solids per unit of total volume prior to drying*
Description : Density of each compacted layer should be ascertained by taking soil samples on either side of Central Line at a) 5 meter interval b) 10 meter interval* c) 12 meter interval d) 15 meter internal
Last Answer : b) 10 meter interval*
Description : Both noting and protest are compulsory in case of A. Foreign Bills B. Inland Bills C. Foreign as well as Inland Bills D. None of them
Last Answer : C. Foreign as well as Inland Bills
Description : In case of emergency, land can be acquired urgently by operation of special section (a) Section 4 & 6 (b) Section 9 & 17* (c) Section 8 & 10 (d) None of them
Last Answer : (b) Section 9 & 17*
Description : In case of septic tank, the length (L) to width (B) ratio is generally (a ) L = 3 B* (b) L = 5 B (c) L = 1.5 B (d) L = B
Last Answer : (a ) L = 3 B*
Description : In case of compaction of soil by sheep foot roller maximum thickness of layer should not exceed buy more than -------------- centimeter of length of their teeth a) 5 centimeter* b) 4 centimeter c) 3 centimeter d) 2 centimeter
Last Answer : a) 5 centimeter*
Description : In case of a curved track on electrified, double line, BG section a) Duty hut cannot be provided for a level crossing. b) Duty hut should be on the inside of the curve. c) Duty hut should be on the outside of the curve.* d) Duty hut can be provided on any side of the curve.
Last Answer : c) Duty hut should be on the outside of the curve.*
Description : In case of Shot Welded Rails the fish plated joint should be avoided on Level Crossings within a distance of --------- from end of level crossing a) 3 meters b) 4 meters c) 5 meters d) 6 meters*
Last Answer : d) 6 meters*
Description : In case of bridge is distressed category I then special restriction of___hall be imposed
Last Answer : 15 kmph
Description : In case of distressed bridge category II, ADEN shall inspect the bridge
Last Answer : once in 6 months
Description : In case of underwater independency diver will be employed in depth beyond___ should be medically checked
Last Answer : 10 m
Description : bridge foundation having less then 2M depth below bed level in case of arch bridges and 1.2M depth below bed level in case of other bridges is termed as
Last Answer : …Shallow foundation..
Description : Repairing by cement pressure grouting can be adopted in case of a) Honey comb concrete b) Hollow masonry, Dormant cracks c) Deep leached mortar joints d) all the above*
Last Answer : d) all the above*
Description : In case of water crossing danger level in bridges a) speed restriction be imposed b) traffic be suspended till water recedes c) traffic be suspended till a responsible person inspects the site and declares it safe for running traffic* d) bridge watchman is to be posted
Last Answer : c) traffic be suspended till a responsible person inspects the site and declares it safe for running traffic*
Description : In case of ‘A’ Class ODC escort is……….. (a) Necessary (b) not necessary* (c) does not matter (d) on direct current
Last Answer : (b) not necessary*
Description : Given two sorted list of size 'm' and 'n' respectively. The number of comparison needed in the worst case by the merge sort algorithm will be (A) m x n (B) max (m, n) (C) min (m, n) (D) m + n – 1
Last Answer : (D) m + n – 1
Description : Transfer of officials, who are not permanent in grade, may in deserving cases, be permitted with the personal approval of the a) Head of the circle b) DG Post c) Min of IT d) None of these
Last Answer : a) Head of the circle
Description : Patient reported to you 30 min after trauma to central incisor. Patient is 10 yrs old and there is traumatic exposure of pulp. What will be the line of treatment- 1) coronal pulpotomy and Ca-hydr. ... 3) 1-2 mm. of coronal pulp extirpated and Ca hydroxide and then permanent filling 4) Pulpectomy
Last Answer : 3) 1-2 mm. of coronal pulp extirpated and Ca hydroxide and then permanent filling
Description : In a precision planter the height of seed drop: A. Should be as close to be ground level as is possible. B. Should be at least 1 m from the ground level. C. Is not a factor to be considered? D. None of These
Last Answer : A. Should be as close to be ground level as is possible.
Description : Formula for average service life of belt at a given speed is a) Life(hrs)= [ Belt length (mm)/ Total fatique rates]*100 b) Life(hrs)=[Total fatique rates / Belt length (mm)]*100 c) Life(hrs)=[Belt length (m)/ Total fatique rates]*100 d) None of the above
Last Answer : a) Life(hrs)= [ Belt length (mm)/ Total fatique rates]*100
Description : Height of Low level platform for passengers for BG is --- high (a) 0.455 m* (b) 0.560 m (c) 0.650 m (d) 0.760 m
Last Answer : (a) 0.455 m*
Description : Height of high level platform for passengers for BG is --- high (a) 0.455 m (b) 0.560 m (c) 0.650 m (d) 0.760 m*
Last Answer : (d) 0.760 m*
Description : Size of cubicle of a booking office is kept as (a) 1.20 x 1.50 m (b) 1.50 x 1.20 m (c) 1.50 x 1.80 m (d) 1.80 x 1.50 m*
Last Answer : (d) 1.80 x 1.50 m*
Description : For new lines, width of formation in bank for N.G single line is (a) 3.35 m (b) 3.70 m* (c ) 5.25 m (e) 5.85 m
Last Answer : b) 3.70 m*
Description : For new lines, width of formation in cutting for N.G. single line is (a) 3.35 m* (b) 3.70 m (c) 5.25 m (d) 5.85 m
Last Answer : a) 3.35 m*
Description : For new lines, width of formation in bank for M.G. single line is (a) 5.25 m (b) 5.85 m* (c ) 6.25 m (e) 6.85 m
Last Answer : (b) 5.85 m*