what is the optimal temperature at the base of the stove above a woodstove to avoid creosote buildup.

what is the optimal temperature at the base of the stove above a woodstove to avoid creosote buildup.
by

1 Answer

Answer :

answer:The ‘optimal’ temperature, I cannot say. However this eHow describes steps you can take to avoid this problem: http://www.ehow.com/how_4855797_avoid-creosote-buildup-wood-stoves.html They do mention quickly getting the heat to over 220º in step 3. Cheers!
by

Related questions

Which of the following is not a by-product recovered in a high temperature coal carbonisation plant? (A) Benzol (B) Pitch-creosote mixture (PCM) (C) Naphthalene (D) Ethylene

Description : Which of the following is not a by-product recovered in a high temperature coal carbonisation plant? (A) Benzol (B) Pitch-creosote mixture (PCM) (C) Naphthalene (D) Ethylene

Last Answer : (D) Ethylene

Optimum preheating temperature for pitch creosote mixture (PCM) which is also termed as C.T.F-200, before atomisation through burners is (A) 200 °F (B) 200 °C (C) 200 °K (D) 200 °R

Description : Optimum preheating temperature for pitch creosote mixture (PCM) which is also termed as C.T.F-200, before atomisation through burners is (A) 200 °F (B) 200 °C (C) 200 °K (D) 200 °R

Last Answer : (A) 200 °F

Does anyone know how to properly dispose of creosote?

Description : Does anyone know how to properly dispose of creosote?

Last Answer : I did a quick google search and found this. It’s information on how to dispose of creosote coated wood. Hope it helps.

Calorific value of pitch creosote mixture (PCM) i.e., C.T.F.-200 is about (A) 8800 kcal/m3 (B) 8800 kcal/kg (C) Same as that of coal middling (D) 25000 kcal/kg

Description : Calorific value of pitch creosote mixture (PCM) i.e., C.T.F.-200 is about (A) 8800 kcal/m3 (B) 8800 kcal/kg (C) Same as that of coal middling (D) 25000 kcal/kg

Last Answer : (B) 8800 kcal/kg

Coal tar fuel - 200 (CTF 200) is a mixture of (A) Pitch and creosote oil (B) Light oil and pitch (C) Anthracene and crecosote oil (D) Solar oil and pitch

Description : Coal tar fuel - 200 (CTF 200) is a mixture of (A) Pitch and creosote oil (B) Light oil and pitch (C) Anthracene and crecosote oil (D) Solar oil and pitch

Last Answer : (A) Pitch and creosote oil

. Main constituents of Benzol are (A) Benzene, toluene & xylene (B) Tar & creosote (C) Ammonia & phenol (D) Anthracene & phenol

Description : . Main constituents of Benzol are (A) Benzene, toluene & xylene (B) Tar & creosote (C) Ammonia & phenol (D) Anthracene & phenol

Last Answer : (A) Benzene, toluene & xylene

Pitch creosote mixture (PCM) as compared to furnace oil is a better fuel, because its (A) Emissivity factor is higher (B) Sulphur content is lower (C) Flue gas has lower dew point thereby facilitating more waste heat recovery (D) All (A), (B) and (C)

Description : Pitch creosote mixture (PCM) as compared to furnace oil is a better fuel, because its (A) Emissivity factor is higher (B) Sulphur content is lower (C) Flue gas has lower dew point thereby facilitating more waste heat recovery (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pitch (a product of coal tar distillation) is always mixed with creosote oil, when it is to be burnt in a burner, because (A) Its calorific value is very less (B) Tar neutralises the residual acids present in pitch (C) It reduces viscosity and imparts fluidity for its transportation through pipelines at economic pressure drop (D) All (A), (B) and (C)

Description : Pitch (a product of coal tar distillation) is always mixed with creosote oil, when it is to be burnt in a burner, because (A) Its calorific value is very less (B) Tar neutralises the residual acids ... for its transportation through pipelines at economic pressure drop (D) All (A), (B) and (C)

Last Answer : (C) It reduces viscosity and imparts fluidity for its transportation through pipelines at economic pressure drop

Which of the following is not a product of coal tar distillation? (A) Anthracene (B) Creosote oil (C) Carbolic oil (D) None of these

Description : Which of the following is not a product of coal tar distillation? (A) Anthracene (B) Creosote oil (C) Carbolic oil (D) None of these

Last Answer : (D) None of these

Whats the best way to remove Calcium buildup off shower walls?

Description : Whats the best way to remove Calcium buildup off shower walls?

Last Answer : I could swear that I’ve heard somewhere that vinegar was good for removing calcium buildup.

the buildup of electric charge on an object is type of electrsiy?

Description : the buildup of electric charge on an object is type of electrsiy?

Last Answer : Static electricity.

How do I remove wax buildup from hardwooe floors

Description : How do I remove wax buildup from hardwooe floors

Last Answer : Need Answer

What was the buildup of the us military in 1916 an example of?

Description : What was the buildup of the us military in 1916 an example of?

Last Answer : Need answer

What kind of bolts can a buildup of static electricity cause?

Description : What kind of bolts can a buildup of static electricity cause?

Last Answer : Lightning bolts for one. Static electricity builds up, and when sufficient voltage is achieved, the bolt forms.

The combustion reactions inside the engine of a rocket cause a buildup of heat and pressure. When this heat and pressure escapes into the atmosphere, what force is created?

Description : The combustion reactions inside the engine of a rocket cause a buildup of heat and pressure. When this heat and pressure escapes into the atmosphere, what force is created?

Last Answer : Thrust (apex)

An open occurring within the field rheostat of an AC generator can be detected by short circuiting its terminals and observing a ____________. A. negative deflection of the wattmeter pointer B. positive deflection of the wattmeter pointer C. buildup of alternator voltage D. low, but constant alternator voltage

Description : An open occurring within the field rheostat of an AC generator can be detected by short circuiting its terminals and observing a ____________. A. negative deflection of the wattmeter pointer B. ... of the wattmeter pointer C. buildup of alternator voltage D. low, but constant alternator voltage

Last Answer : Answer: C

The removal of paint from electrical equipment, such as generators, should be cautiously undertaken because ____________. A. the mechanical shock of paint removal lessens the dielectric strength of the insulation B. the paint dust is composed of abrasive and semi-conducting materials which impair insulation C. paint dust buildup has a tendency to cause corrosion D. phase windings frequently become isolated from each other due to dust interference at the terminals

Description : The removal of paint from electrical equipment, such as generators, should be cautiously undertaken because ____________. A. the mechanical shock of paint removal lessens the dielectric strength ... phase windings frequently become isolated from each other due to dust interference at the terminals

Last Answer : Answer: B

A shading coil used in an AC magnetic controller, functions to _____________. A. reduce vibration and noise in the contactor B. prevent flux buildup in the operating coil C. eliminate arcing when the contacts close D. energize the operating coil and 'pull in' the contacts

Description : A shading coil used in an AC magnetic controller, functions to _____________. A. reduce vibration and noise in the contactor B. prevent flux buildup in the operating coil C. eliminate arcing when the contacts close D. energize the operating coil and 'pull in' the contacts

Last Answer : Answer: A

Which of the following would be consistent with an aggressive approach to financ ing working capital? A. Financing short-term needs with short-term funds. B. Financing permanent inventory buildup with long-term debt. C. Financing seasonal needs with short-term funds. D. Financing some long-term needs with short-term funds

Description : Which of the following would be consistent with an aggressive approach to financ ing  working capital? A. Financing short-term needs with short-term funds. B. Financing permanent inventory buildup with ... needs with short-term funds. D. Financing some long-term needs with short-term  funds

Last Answer : D. Financing some long-term needs with short-term  funds.

"How will conflicts over resources/facility usage between this and other projects be settled?", is critically settled at level A. Main program B. Project formation C. Project Buildup D. Project Buildup

Description : "How will conflicts over resources/facility usage between this and other projects be settled?", is critically settled at level A. Main program B. Project formation C. Project Buildup D. Project Buildup

Last Answer : B. Project formation

How will conflicts over resources/facility usage between this and other projects be settled?", is critically settled at level A. Main program B. Project formation C. Project Buildup D. Project Buildup

Description : How will conflicts over resources/facility usage between this and other projects be settled?", is critically settled at level A. Main program B. Project formation C. Project Buildup D. Project Buildup

Last Answer : B. Project formation

Which of the following is NOT a condition seen with the development of dental caries? a. A Susceptible Tooth With A Buildup Of Plaque b. Dietary Carbohydrates (Usually Sugar) c. Acidogenic Bacterial Species d. Chewing A Lot Of Gum

Description : Which of the following is NOT a condition seen with the development of dental caries? a. A Susceptible Tooth With A Buildup Of Plaque b. Dietary Carbohydrates (Usually Sugar) c. Acidogenic Bacterial Species d. Chewing A Lot Of Gum

Last Answer : d. Chewing A Lot Of Gum

Which of the following is NOT a condition seen with the development of dental caries? a. A Susceptible Tooth With A Buildup Of Plaque b. Dietary Carbohydrates (Usually Sugar) c. Acidogenic Bacterial Species d. Chewing A Lot Of Gum

Description : Which of the following is NOT a condition seen with the development of dental caries? a. A Susceptible Tooth With A Buildup Of Plaque b. Dietary Carbohydrates (Usually Sugar) c. Acidogenic Bacterial Species d. Chewing A Lot Of Gum

Last Answer : d. Chewing A Lot Of Gum

Which one of the following statements does NOT apply to dental plaque? a. It is an example of a biofilm. b. It is most noticeable on the molars. c. Its buildup on teeth can lead to gingivitis and periodontal disease. d. It is dominated by aerobic bacterial species.

Description : Which one of the following statements does NOT apply to dental plaque? a. It is an example of a biofilm. b. It is most noticeable on the molars. c. Its buildup on teeth can lead to gingivitis and periodontal disease. d. It is dominated by aerobic bacterial species.

Last Answer : d. It is dominated by aerobic bacterial species.

Which of the following observations in the patient who has undergone allograft for treatment of burn site must be reported to the physician immediately? a) Crackles in the lungs Crackles in the lungs may indicate a fluid buildup indicative of congestive heart failure and pulmonary edema.

Description : Which of the following observations in the patient who has undergone allograft for treatment of burn site must be reported to the physician immediately? a) Crackles in the lungs Crackles in the lungs ... pain at the recipient site is anticipated since the wound has been protected by the graft.

Last Answer : a) Crackles in the lungs Crackles in the lungs may indicate a fluid buildup indicative of congestive heart failure and pulmonary edema.

The term or disease associated with buildup of fibrous plaques in the sheath of the corpus cavernosum causing curvature of the penis when it is erect is known as a) Peyronie’s disease. Peyronie’s disease may require surgical removal of the plaques when the disease makes sexual intercourse painful, difficult, or impossible.

Description : The term or disease associated with buildup of fibrous plaques in the sheath of the corpus cavernosum causing curvature of the penis when it is erect is known as a) Peyronie's disease. ... refers to an uncontrolled, persistent erection of the penis occurring from either neural or vascular causes.

Last Answer : a) Peyronie’s disease. Peyronie’s disease may require surgical removal of the plaques when the disease makes sexual intercourse painful, difficult, or impossible.

How do you prevent excessive heat buildup on an area of a board when soldering multilead components?

Description : How do you prevent excessive heat buildup on an area of a board when soldering multilead components?

Last Answer : Use a skipping pattern

An insulation manufacturer talks to an executive at Wimpey to find out how much insulation material the company intents to use in building homes next year and then multiplies the estimate by the number of homes planned to be built over the country next year. The manufacturer is using a ------ approach to measure sales potential. A)use of product B)breakdown C)correlation D)buildup

Description : An insulation manufacturer talks to an executive at Wimpey to find out how much insulation material the company intents to use in building homes next year and then multiplies the estimate by the number ... --- approach to measure sales potential. A)use of product B)breakdown C)correlation D)buildup

Last Answer : D)buildup

Cells must constantly manage metabolic pathways, and this is often done by balancing specific biochemical reactions within a pathway. For example, the metabolic product of one pathway may block the formation of that specific metabolite at an earlier point in the pathway to prevent a buildup of that specific product. What is this process called?

Description : Cells must constantly manage metabolic pathways, and this is often done by balancing specific biochemical reactions within a pathway. For example, the metabolic product of one pathway may block the formation ... the pathway to prevent a buildup of that specific product. What is this process called?

Last Answer : Feedback inhibition

The range within which a load can be applied on a rectangular column, to avoid any tensile stress, is (A) One-half of the base (B) One-fifth of the base (C) One-fourth of the base (D) One-fifth of the base

Description : The range within which a load can be applied on a rectangular column, to avoid any tensile stress,  is  (A) One-half of the base  (B) One-fifth of the base  (C) One-fourth of the base  (D) One-fifth of the base 

Last Answer : (B) One-fifth of the base 

Instructions for the patient with low back pain include which of the following? a) When lifting, avoid overreaching. Instructions for the patient with low back pain should include that when lifting, the patient should avoid overreaching. The patient should also keep the load close to the body, bend the knees and tighten the abdominal muscles, use a wide base of support, and use a back brace to protect the back.

Description : Instructions for the patient with low back pain include which of the following? a) When lifting, avoid overreaching. Instructions for the patient with low back pain should include that when lifting, ... lifting, the patient with low back pain should bend the knees and tighten the abdominal muscles.

Last Answer : a) When lifting, avoid overreaching. Instructions for the patient with low back pain should include that when lifting, the patient should avoid overreaching. The patient should also keep the load close to the ... muscles, use a wide base of support, and use a back brace to protect the back.

After making an impression to reline an RPD the dentist notes that the indirect retainers are not resting on the tooth. To avoid this, what process should have undertaken initially: A. Ask patient to bite firmly while impression is setting B. Hold the metal base frame against the abutment tooth while setting C. Fabricate new denture D. Add impression material and close the gap

Description : After making an impression to reline an RPD the dentist notes that the indirect retainers are not resting on the tooth. To avoid this, what process should have undertaken initially: A. Ask ... abutment tooth while setting C. Fabricate new denture D. Add impression material and close the gap

Last Answer : B. Hold the metal base frame against the abutment tooth while setting

The range within which a load can be applied on a rectangular column, to avoid any tensile stress,is (a) One-half of the base (b) One-fifth of the base (c) One-fourth of the base (d) One-fifth of the base

Description : The range within which a load can be applied on a rectangular column, to avoid any tensile stress,is (a) One-half of the base (b) One-fifth of the base (c) One-fourth of the base (d) One-fifth of the base

Last Answer : (b) One-fifth of the base

Car-savvy jellies: what's the optimal $ cutoff for buying a used car?

Description : Car-savvy jellies: what's the optimal $ cutoff for buying a used car?

Last Answer : I have bought a number of used cars. I would never buy any car that I knew needed work. I always buy a Toyota or Honda. They run forever.

What is the maximum amount of power a AA battery can generate in optimal conditions?

Description : What is the maximum amount of power a AA battery can generate in optimal conditions?

Last Answer : answer:it is possible, it is all in the gearing, although it can lift a man, it would be very slow. With everything there is a trade off of power and speed, if you add to one side, you have to take away from the other side. i.e. more power, less speed, etc.

I want to paint my old furniture. How do I get optimal results?

Description : I want to paint my old furniture. How do I get optimal results?

Last Answer : answer:Use a fine grain sand paper first, then make sure you have completely cleaned off all the dust and oil. It might be a good idea to use a detergent on it. (wood) Consult one of the many internet sites available for tips and ideas for refinishing/repainting furniture.

How do you do an optimal binary search on a two variable function?

Description : How do you do an optimal binary search on a two variable function?

Last Answer : You need to clarify your terminology a little bit. Symmetric about the diagonal? Strictly increasing with respect to which ordering of the pairs?

How reliable is the claim that the optimal BMI is 27 because it correlates with maximum life expectancy?

Description : How reliable is the claim that the optimal BMI is 27 because it correlates with maximum life expectancy?

Last Answer : Maybe he’s correct if your BMI is that high because it’s all sheer muscle mass and black hole bone density.

Which three cities would be "optimal" for spreading a contagious agent throughout the world most effectively?

Description : Which three cities would be "optimal" for spreading a contagious agent throughout the world most effectively?

Last Answer : I know, but why would I tell?

What is the optimal time in advance to book hotels online?

Description : What is the optimal time in advance to book hotels online?

Last Answer : answer:Discount strategies vary from hotel to hotel. More often than not, the cheaper rates are found on the online sites. Here is how it typically works: the hotel staff forecasts what their occupancy will ... the reservation is for, ask them to honor the lower rate for your stay. Does this help?

Has eating something from its optimal growing area ruined you for anything less? If so, what?

Description : Has eating something from its optimal growing area ruined you for anything less? If so, what?

Last Answer : answer:I agree with you about the corn. I bought some “fresh” corn from Walmart today. It’s only late April. My husband laughed and we discussed where this corn may have came from. but I really wanted corn, and frozen wasn’t going to do good question!

In your humble opinion, what should the human food plan/diet probably consist of for optimal health?

Description : In your humble opinion, what should the human food plan/diet probably consist of for optimal health?

Last Answer : No processed foods, no sugary drinks. The diet consists of mostly vegetables, fruits and whole grains. No meat, no dairy. Obviously, this is our diet and many disagree with it. But that’s what I believe is the healthiest diet.

What is the optimal angle at which to throw an object?

Description : What is the optimal angle at which to throw an object?

Last Answer : I’m going to have to go back to my Physics book on this one…

What's the most "optimal" camera for Scuba Diving?

Description : What's the most "optimal" camera for Scuba Diving?

Last Answer : I do not have one particular one to recommend, however I do have a very comprehensive site which may be of help. Also keep in mind, there are many “housings” you can purchase for a point and shoot. This way, it won’t turn into a camera you use only on occasion. Best of luck.

What's the optimal way to pump gas?

Description : What's the optimal way to pump gas?

Last Answer : answer:I always fill up the tank when the marker is at the ¾ mark. That is because gas stations here are few and far between and there are odd and fairly regular power outages. No power, no gas. The marker ... try to keep ½ tank always. And when I pump, I stand upwind so I don't breathe the fumes.

When you grow impulsive and make less than optimal choices, are you aware that it is happening?

Description : When you grow impulsive and make less than optimal choices, are you aware that it is happening?

Last Answer : Yes, yes, yes. The best example I can give is that I am a compulsive skin picker. Have been since the age of 5. I know it's awful, bad for me, and unsightly, but It's basically painful ... room somewhere in my mind. Then again, perhaps that is the qualification for crazy. I just wish I could stop.

Is there anything you can do if you swallow a piece of hard candy before it has reached its OCSS (optimal comfort swallowing size)?

Description : Is there anything you can do if you swallow a piece of hard candy before it has reached its OCSS (optimal comfort swallowing size)?

Last Answer : drink something hot to help it melt faster

From the Aliens' POV, Which of Earth's places would be the optimal choice for peaceful first contact? United States, European Union, Russian Federation, Middle East, or China?

Description : From the Aliens' POV, Which of Earth's places would be the optimal choice for peaceful first contact? United States, European Union, Russian Federation, Middle East, or China?

Last Answer : I don't think a first meeting amound a large coroboration of nations would be best An isolated meeting with one of the singular, more powerful nations would be best it seems. if they were to jump ... all at once if you isolate the first experience it reduces the chances of mass panic world wide.

azaleas when to fertilize and optimal fertilizer

Description : azaleas when to fertilize and optimal fertilizer

Last Answer : I would test them first for PH...............

What is optimal cost?

Description : What is optimal cost?

Last Answer : From an Information technology perspective, optimizing yourcosts is about spending wisely and judging where you cut and whereyou invest in terms of the impact on the business.