How much fuel can be jettisoned? a. A specific amount b. The captain decides c. All d. A specified amount must remain

How much fuel can be jettisoned?  
a. A specific amount  
b. The captain decides  
c. All  
d. A specified amount must remain
by

1 Answer

Answer :

d. A specified amount must remain
by

Related questions

How much fuel can be jettisoned? a. A specific amount b. The captain decides c. All d. A specified amount must remain

Description : How much fuel can be jettisoned? a. A specific amount b. The captain decides c. All d. A specified amount must remain

Last Answer : d. A specified amount must remain

Fuel is to be jettisoned: a. Over the sea and then only above 10,000ft b. Over the sea or over land above 10,000ft AGL c. Anywhere and at any height if unavoidable in an emergency d. Over the sea, or over land above 4000ft in summer or 7000ft in winter

Description : Fuel is to be jettisoned: a. Over the sea and then only above 10,000ft b. Over the sea or over land above 10,000ft AGL c. Anywhere and at any height if unavoidable in an emergency d. Over the sea, or over land above 4000ft in summer or 7000ft in winter

Last Answer : c. Anywhere and at any height if unavoidable in an emergency

With reference to Traffic Collision Avoidance Systems: a. RAs may be disregarded only when the pilot visually identifies the potentially conflicting traffic and decides that no deviation is necessary and has the clearance confirmed by ATC b. RAs may be disregarded only when the pilot visually identifies the potentially conflicting traffic and decides that no deviation is necessary and has advised ATC of the other aircraft’s proximity c. RAs must never be disregarded d. RAs may be disregarded only when the pilot visually identifies the potentially conflicting traffic and decides that no deviation is necessary

Description : With reference to Traffic Collision Avoidance Systems: a. RAs may be disregarded only when the pilot visually identifies the potentially conflicting traffic and decides that no deviation ... pilot visually identifies the potentially conflicting traffic and decides that no deviation is necessary

Last Answer : d. RAs may be disregarded only when the pilot visually identifies the potentially conflicting traffic and decides that no deviation is necessary

When the Captain cannot comply with an ATC clearance: a. The Captain must accept the ATC clearance, because it is based on a filed flight plan b. He/she may request an amended clearance and, if executable, he/she will accept that clearance c. He/she may ask a new clearance and the appropriate ATC must grant him/her that clearance d. He/she may suggest a new clearance to ATC

Description : When the Captain cannot comply with an ATC clearance: a. The Captain must accept the ATC clearance, because it is based on a filed flight plan b. He/she may request an amended clearance and, if ... appropriate ATC must grant him/her that clearance d. He/she may suggest a new clearance to ATC

Last Answer : b. He/she may request an amended clearance and, if executable, he/she will accept that clearance

How much fuel must be jettisoned

Description : How much fuel must be jettisoned

Last Answer : A. a specified amount must remain

An aircraft flying over the sea between 4500ft and 9000ft AMSL and outside CAS. To continue under VFR the meteorological conditions must remain: a. 2000ft horizontally and 1000ft vertically from cloud with visibility of 8km b. 1500m horizontally and 1000ft vertically from cloud with visibility of 5km c. 1500m horizontally and 1000m vertically from cloud with visibility of 5km d. Clear of cloud and in sight of the surface with visibility of 5km

Description : An aircraft flying over the sea between 4500ft and 9000ft AMSL and outside CAS. To continue under VFR the meteorological conditions must remain: a. 2000ft horizontally and 1000ft vertically from cloud with ... visibility of 5km d. Clear of cloud and in sight of the surface with visibility of 5km

Last Answer : b. 1500m horizontally and 1000ft vertically from cloud with visibility of 5km

One way in which passengers can be reassured during an emergency is: a. To regularly see members of the flight crew calmly moving about the cabin in a relaxed manner b. For the captain or first officer to keep a running commentary going over the PA c. For the cabin staff to ensure the passengers are aware of what is happening and that they are complying with instructions d. For the cabin staff to direct passengers’ attention to the emergency passenger brief cards and make sure that they have read them

Description : One way in which passengers can be reassured during an emergency is: a. To regularly see members of the flight crew calmly moving about the cabin in a relaxed manner b. For the ... to direct passengers' attention to the emergency passenger brief cards and make sure that they have read them

Last Answer : c. For the cabin staff to ensure the passengers are aware of what is happening and that they are complying with instructions

Who checks, before flight, that the aircraft’s weight is such that the flight can be safely made and that any transported cargo is properly distributed and secured? a. The company’s cargo technicians b. The captain c. The mechanic on board, or in his absence the co-pilot d. The operator

Description : Who checks, before flight, that the aircraft’s weight is such that the flight can be safely made and that any transported cargo is properly distributed and secured? a. The company’s cargo technicians b. The captain c. The mechanic on board, or in his absence the co-pilot d. The operator

Last Answer : b. The captain

During a general briefing at the pre-flight stage, the captain should emphasize: a. The complete delegation of all duties b. The importance of crew coordination c. The priority of departing on schedule d. The avoidance of inadequate handling of controls

Description : During a general briefing at the pre-flight stage, the captain should emphasize: a. The complete delegation of all duties b. The importance of crew coordination c. The priority of departing on schedule d. The avoidance of inadequate handling of controls

Last Answer : b. The importance of crew coordination

What should a Captain do before making a non-urgent decision? a. Put his own view forward and then ask for the opinions of other members of the crew b. Consider all implications c. Encourage ideas from the crew before stating his own opinion d. Monitor his motor programme (flying)

Description : What should a Captain do before making a non-urgent decision? a. Put his own view forward and then ask for the opinions of other members of the crew b. Consider all implications c. Encourage ideas from the crew before stating his own opinion d. Monitor his motor programme (flying)

Last Answer : c. Encourage ideas from the crew before stating his own opinion

Where are icing conditions on route specified? a. TAF and METAR b. METAR and SIGMET c. SWC (sig. weather chart) and SIGMET d. SPECI and TREND

Description : Where are icing conditions on route specified? a. TAF and METAR b. METAR and SIGMET c. SWC (sig. weather chart) and SIGMET d. SPECI and TREND

Last Answer : c. SWC (sig. weather chart) and SIGMET

If airbrakes are extended during a glide, and speed maintained, the rate of descent will: a. Increase and glide angle will be steeper b. Increase but glide angle will remain the same c. Decrease d. Remain the same

Description : If airbrakes are extended during a glide, and speed maintained, the rate of descent will: a. Increase and glide angle will be steeper b. Increase but glide angle will remain the same c. Decrease d. Remain the same

Last Answer : a. Increase and glide angle will be steeper

Which statement best describes the operating principle of a constant-speed propeller? a. As throttle setting is changed by the pilot, the prop governor causes pitch angle of the propeller blades to remain unchanged b. The propeller control regulates the engine RPM and in turn the propeller RPM c. A high blade angle, or increased pitch, reduces the propeller drag and allows more engine power for take-offs d. As the propeller control setting is changed by the pilot, the RPM of the engines remains constant as the pitch angle of the propeller changes

Description : Which statement best describes the operating principle of a constant-speed propeller? a. As throttle setting is changed by the pilot, the prop governor causes pitch angle of the propeller blades to ... the pilot, the RPM of the engines remains constant as the pitch angle of the propeller changes

Last Answer : b. The propeller control regulates the engine RPM and in turn the propeller RPM

You are flying at a constant FL 290 and a constant mach number. The total temperature increases by 5°. The CAS will: a. Remain approximately constant b. Increase by 10 kts c. Decrease by 10 kts d. Will increase or decrease depending on whether you are above or below ISA

Description : You are flying at a constant FL 290 and a constant mach number. The total temperature increases by 5°. The CAS will: a. Remain approximately constant b. Increase by 10 kts c. Decrease by 10 kts d. Will increase or decrease depending on whether you are above or below ISA

Last Answer : a. Remain approximately constant

At the alternate aerodrome, the commander of a turbojet engine aeroplane should have a fuel quantity (final reserve) sufficient for flying during: a. 30 minutes at holding flight speed at 1,500 ft b. 45 minutes at holding flight speed at 1,500 ft c. 30 minutes at cruising speed d. 45 minutes at cruising speed

Description : At the alternate aerodrome, the commander of a turbojet engine aeroplane should have a fuel quantity (final reserve) sufficient for flying during: a. 30 minutes at holding flight speed at 1,500 ft b. 45 ... speed at 1,500 ft c. 30 minutes at cruising speed d. 45 minutes at cruising speed

Last Answer : a. 30 minutes at holding flight speed at 1,500 ft

Refer to CAP697 MRJT1 Fig. 4.3.1 Given: Estimated zero fuel mass 50t; estimated landing mass at destination 52t; final reserve fuel 2t; alternate fuel 1t; flight to destination distance 720nm, true course 030, W/V 340/30; cruise: LRC, at FL330 outside air temperature -30C. Find estimated trip fuel and time. a. 4,800kg / 01hr 45min b. 4,400kg / 02hr 02min c. 4,750kg / 02hr 00min d. 4,600kg / 02hr 05min

Description : Refer to CAP697 MRJT1 Fig. 4.3.1 Given: Estimated zero fuel mass 50t; estimated landing mass at destination 52t; final reserve fuel 2t; alternate fuel 1t; flight to destination distance 720nm, true course 030, W/V ... b. 4,400kg / 02hr 02min c. 4,750kg / 02hr 00min d. 4,600kg / 02hr 05min

Last Answer : a. 4,800kg / 01hr 45min

Refer to CAP697 MRJT1 Fig. 4.3.6 Given: Distance to alternate 400nm Landing mass at alternate 50,000kg Headwind component 25kt The alternate fuel required is: a. 2550kg b. 2800kg c. 2900kg d. 2650kg

Description : Refer to CAP697 MRJT1 Fig. 4.3.6 Given: Distance to alternate 400nm Landing mass at alternate 50,000kg Headwind component 25kt The alternate fuel required is: a. 2550kg b. 2800kg c. 2900kg d. 2650kg

Last Answer : b. 2800kg

DOM 33,510kt; Traffic load 7,600kg; Trip fuel 2040kg; Final reserve 983kg Alternative fuel 1100kg; Contingency 5% of trip fuel Which of the following is correct? a. Estimated landing mass at destination 43,193kg b. Estimated landing mass at destination 43,295kg c. Estimated take-off mass 43,295kg d. Estimated take-off mass 45,233kg

Description : DOM 33,510kt; Traffic load 7,600kg; Trip fuel 2040kg; Final reserve 983kg Alternative fuel 1100kg; Contingency 5% of trip fuel Which of the following is correct? a. Estimated landing mass at destination ... 43,295kg c. Estimated take-off mass 43,295kg d. Estimated take-off mass 45,233kg

Last Answer : b. Estimated landing mass at destination 43,295kg

A flight is planned from L to M, distance 850 nm. Wind component out is 35 kt(TWC), TAS 450kt. Mean fuel flow out is 2500kg/hr, mean fuel flow inbound is 1900kg/hr and the fuel available is 6000kg. The time and distance to PSR is: a. 1hr 30 min, 660nm b. 1hr 30 min, 616nm c. 1hr 15 min, 606nm d. 1hr 16 min, 616nm

Description : A flight is planned from L to M, distance 850 nm. Wind component out is 35 kt(TWC), TAS 450kt. Mean fuel flow out is 2500kg/hr, mean fuel flow inbound is 1900kg/hr and the fuel available is 6000kg. The time ... 30 min, 660nm b. 1hr 30 min, 616nm c. 1hr 15 min, 606nm d. 1hr 16 min, 616nm

Last Answer : d. 1hr 16 min, 616nm

How is fuel consumption affect by the C of G position, in terms of ANM/kg? a. Increases with a forward C of G b. Decreases with an aft C of G c. Decreases with a forward C of G d. Fuel consumption is not affected by the C of G position

Description : How is fuel consumption affect by the C of G position, in terms of ANM/kg? a. Increases with a forward C of G b. Decreases with an aft C of G c. Decreases with a forward C of G d. Fuel consumption is not affected by the C of G position

Last Answer : c. Decreases with a forward C of G

Define the useful load: a. traffic load plus dry operating mass b. traffic load plus usable fuel mass c. dry operating mass plus usable fuel load d. that part of the traffic load which generates revenue

Description : Define the useful load: a. traffic load plus dry operating mass b. traffic load plus usable fuel mass c. dry operating mass plus usable fuel load d. that part of the traffic load which generates revenue

Last Answer : a. traffic load plus dry operating mass

Maximum endurance: a. Can be achieved in level unaccelerated flight with minimum fuel consumption b. Can be achieved by flying at the best rate of climb speed in straight and level flight c. Can be achieved in a steady climb d. Can be achieved by flying at the absolute ceiling

Description : Maximum endurance: a. Can be achieved in level unaccelerated flight with minimum fuel consumption b. Can be achieved by flying at the best rate of climb speed in straight and level flight c. Can be achieved in a steady climb d. Can be achieved by flying at the absolute ceiling

Last Answer : a. Can be achieved in level unaccelerated flight with minimum fuel consumption

At a fuel check you have 60 US gallons (USG) of usable fuel remaining. Alternative fuel required is 12USG. The flight time remaining is 1 hour 35 mins. What is the highest consumption rate acceptable? a. 33.0 USG/Hr b. 37.9 USG/Hr c. 30.3 USG/Hr d. 21.3 USG/Hr

Description : At a fuel check you have 60 US gallons (USG) of usable fuel remaining. Alternative fuel required is 12USG. The flight time remaining is 1 hour 35 mins. What is the highest consumption rate acceptable? a. 33.0 USG/Hr b. 37.9 USG/Hr c. 30.3 USG/Hr d. 21.3 USG/Hr

Last Answer : c. 30.3 USG/Hr

Following a communications failure, the time at which the aircraft should aim to leave the hold is: a. Within 10 minutes of the EAT or ETA b. Within 30 minutes of the EAT or ETA c. EAT or ETA d. Before it runs out of fuel

Description : Following a communications failure, the time at which the aircraft should aim to leave the hold is: a. Within 10 minutes of the EAT or ETA b. Within 30 minutes of the EAT or ETA c. EAT or ETA d. Before it runs out of fuel

Last Answer : c. EAT or ETA

How do you control power in a jet engine? a. By controlling the mixture ratio b. By controlling the fuel flow c. By controlling the airflow d. By controlling the bleed valves

Description : How do you control power in a jet engine? a. By controlling the mixture ratio b. By controlling the fuel flow c. By controlling the airflow d. By controlling the bleed valves

Last Answer : b. By controlling the fuel flow

The EGT indication on a piston engine is used: a. To control the cooling air shutters b. To monitor the oil temperature c. To assist the pilot to adjust the fuel mixture d. To indicate cylinder head temperature

Description : The EGT indication on a piston engine is used: a. To control the cooling air shutters b. To monitor the oil temperature c. To assist the pilot to adjust the fuel mixture d. To indicate cylinder head temperature

Last Answer : c. To assist the pilot to adjust the fuel mixture

When does the engine High Pressure fuel shut off valve close? a. After a booster pump failure b. When the engine fuel switch is selected ‘ON’ during engine start c. When flight idle is selected d. When the engine fuel switch is selected ‘OFF’ during engine shut-down

Description : When does the engine High Pressure fuel shut off valve close? a. After a booster pump failure b. When the engine fuel switch is selected ‘ON’ during engine start c. When flight idle is selected d. When the engine fuel switch is selected ‘OFF’ during engine shut-down

Last Answer : d. When the engine fuel switch is selected ‘OFF’ during engine shut-down

An aeroplane of 110,000kg has its CG at 22.6m aft of the datum. The CG limits are 18m to 22m aft of the datum. How much mass must be removed from a hold 30m aft of the datum to bring the CG to its mid point? a. 26,800 kg b. 28,600 kg c. 86,200 kg d. 62,800 kg

Description : An aeroplane of 110,000kg has its CG at 22.6m aft of the datum. The CG limits are 18m to 22m aft of the datum. How much mass must be removed from a hold 30m aft of the datum to bring the CG to its mid point? a. 26,800 kg b. 28,600 kg c. 86,200 kg d. 62,800 kg

Last Answer : b. 28,600 kg

Maintain 850 OC for 1 hour (soaking time).  Cool the material to 60 OC in 4 hours. a) Calculate the efficiency of the furnace, if the specific heat of steel is 0.12 kcal/kgOC and fuel oil consumption per batch is 1400 litres.  GCV of fuel oil - 10200 kcal/kg,  Cost of fuel oil - Rs. 46,000/kL,  Sp. gr. of fuel oil - 0.92. b) Due to high cost of oil, the plant management decides to convert to a lower operating cost LPG fired furnace lined on the inside with ceramic fibre insulation and with an operating efficiency of 80%, for same requirement. The investment towards installation of the new furnace is Rs. 50 lakhs. Calculate the Return on Investment, if the plant operates two batches per day and 250 days in a year.  Cost of LPG - Rs. 75/kg,  GCV of LPG - 12500 kcal/kg.

Description : In a heat treatment shop, steel components are heat-treated in batches of 80 Tons. The  heat treatment cycle is as follows;  Increase temperature from 30 OC to 850 OC in 3 hours.  ... efficiency of 80%, for same requirement. The investment towards installation of  the new furnace is Rs. 50

Last Answer : Quantity of steel treated per batch - 80 Tons a. Efficiency of Furnace: Useful heat supplied to steel - 80000 x 0.12 x (850 - 30)   = 7872000 kcal/batch .1 mark Total heat ... = Rs. 64400/batch Efficiency of new LPG furnace - 80% Heat supplied in new LPG furnace - 7872000/0.8

What true airspeed and angle of attack should be used to generate the same amount of lift as altitude is increased? a. A higher true airspeed for any given angle of attack b. The same true airspeed and angle of attack c. A lower true airspeed and higher angle of attack d. A constant angle of attack and true airspeed

Description : What true airspeed and angle of attack should be used to generate the same amount of lift as altitude is increased? a. A higher true airspeed for any given angle of attack b. The same true ... c. A lower true airspeed and higher angle of attack d. A constant angle of attack and true airspeed

Last Answer : a. A higher true airspeed for any given angle of attack

Two aircrafts, one with a sharp wing profile (S) and the other with a thick profile (T), are flying through the same cloud with the same true airspeed. The cloud consists of small supercooled droplets. Which of the following statements is most correct concerning ice accretion? a. Aircraft T experiences more icing than S b. Aircraft S and T experience the same amount of icing c. Neither of the aircrafts accumulate ice due to the small size of droplets d. Aircraft S experiences more icing than T

Description : Two aircrafts, one with a sharp wing profile (S) and the other with a thick profile (T), are flying through the same cloud with the same true airspeed. The cloud consists of small ... aircrafts accumulate ice due to the small size of droplets d. Aircraft S experiences more icing than T

Last Answer : d. Aircraft S experiences more icing than T

What is the absolute time a pilot should stop drinking before flying? a. 6 hours but it depends upon the amount of alcohol that has been consumed b. 24 hours but it depends upon the amount of alcohol that has been consumed c. 12 hours but it depends upon the amount of alcohol that has been consumed d. 8 hours but it depends upon the amount of alcohol that has been consumed

Description : What is the absolute time a pilot should stop drinking before flying? a. 6 hours but it depends upon the amount of alcohol that has been consumed b. 24 hours but it depends upon the amount of ... that has been consumed d. 8 hours but it depends upon the amount of alcohol that has been consumed

Last Answer : d. 8 hours but it depends upon the amount of alcohol that has been consumed

To maintain altitude, what must be done as Indicated Airspeeed (IAS) is reduced? a. Decrease angle of attack to reduce the drag b. Increase angle of attack to maintain the correct lift force c. Deploy the speed brakes to increase drag d. Reduce thrust

Description : To maintain altitude, what must be done as Indicated Airspeeed (IAS) is reduced? a. Decrease angle of attack to reduce the drag b. Increase angle of attack to maintain the correct lift force c. Deploy the speed brakes to increase drag d. Reduce thrust

Last Answer : b. Increase angle of attack to maintain the correct lift force

A yaw damper: a. Increases rudder effectiveness b. Must be disengaged before making a turn c. Augments stability d. Increases the rate of yaw

Description : A yaw damper: a. Increases rudder effectiveness b. Must be disengaged before making a turn c. Augments stability d. Increases the rate of yaw

Last Answer : c. Augments stability

If a landing is to be made without flaps, the landing speed must be: a. reduced b. increased c. the same as for landing with flaps d. the same as for landing with flaps but with a steeper approach

Description : If a landing is to be made without flaps, the landing speed must be: a. reduced b. increased c. the same as for landing with flaps d. the same as for landing with flaps but with a steeper approach

Last Answer : b. increased

To cover the greatest distance when gliding, the gliding speed must be: a. Near to the stalling speed b. As high as possible within VNE limits c. About 30% faster than Vmd d. The one that gives the highest L/D ratio

Description : To cover the greatest distance when gliding, the gliding speed must be: a. Near to the stalling speed b. As high as possible within VNE limits c. About 30% faster than Vmd d. The one that gives the highest L/D ratio

Last Answer : d. The one that gives the highest L/D ratio

A stall warning device must be set to operate: a. At the stalling speed b. At a speed just below the stalling speed c. At a speed about 5% to 10% above the stalling speed d. At a speed about 20% above the stalling speed

Description : A stall warning device must be set to operate: a. At the stalling speed b. At a speed just below the stalling speed c. At a speed about 5% to 10% above the stalling speed d. At a speed about 20% above the stalling speed

Last Answer : c. At a speed about 5% to 10% above the stalling speed

To ensure some degree of longitudinal stability in flight, the position of the CG: a. Must always coincide with the AC b. Must be forward of the Neutral Point c. Must be aft of the Neutral Point d. Must not be forward of the aft CG limi

Description : To ensure some degree of longitudinal stability in flight, the position of the CG: a. Must always coincide with the AC b. Must be forward of the Neutral Point c. Must be aft of the Neutral Point d. Must not be forward of the aft CG limi

Last Answer : b. Must be forward of the Neutral Point

When refuelling is being conducted with passengers embarking or disembarking: a. Refuelling is strictly prohibited whilst passengers are embarking or disembarking b. All flight crew must be on board c. Communications shall be maintained by ground crew and qualified crew on board d. The stairs shall be fully extended

Description : When refuelling is being conducted with passengers embarking or disembarking: a. Refuelling is strictly prohibited whilst passengers are embarking or disembarking b. All flight crew must be on board c. ... by ground crew and qualified crew on board d. The stairs shall be fully extended

Last Answer : c. Communications shall be maintained by ground crew and qualified crew on board

When must a radiation indicator be carried? a. For flight above 29,000ft b. For flight above 39,000ft c. For flight above 49,000ft d. For flight above 59,000ft

Description : When must a radiation indicator be carried? a. For flight above 29,000ft b. For flight above 39,000ft c. For flight above 49,000ft d. For flight above 59,000ft

Last Answer : c. For flight above 49,000ft

After an accident, the operator of an aeroplane equipped with a flight recorder must keep the original recordings for a minimum period of: a. 30 days b. 90 days c. 45 days d. 60 days

Description : After an accident, the operator of an aeroplane equipped with a flight recorder must keep the original recordings for a minimum period of: a. 30 days b. 90 days c. 45 days d. 60 days

Last Answer : d. 60 days

On an ILS approach, you are told that the weather has dropped below company minima. When must you abort the approach? a. Start of the glide-slope descent b. FAF c. Inner marker d. Outer marker

Description : On an ILS approach, you are told that the weather has dropped below company minima. When must you abort the approach? a. Start of the glide-slope descent b. FAF c. Inner marker d. Outer marker

Last Answer : d. Outer marker

To act as co-pilot for take-off or landing, you must have: a. Acted as PIC or co-pilot on type in the last 90 days b. Acted as PIC or co-pilot on type in the last 30 days c. Acted as PIC or co-pilot on type in the last 60 days d. Been at the controls for landing in the same type recently

Description : To act as co-pilot for take-off or landing, you must have: a. Acted as PIC or co-pilot on type in the last 90 days b. Acted as PIC or co-pilot on type in the last 30 days c. Acted as PIC or co-pilot on type in the last 60 days d. Been at the controls for landing in the same type recently

Last Answer : a. Acted as PIC or co-pilot on type in the last 90 days

The VOR indications on an RMI whose deviation is not zero: a. Are magnetic b. Are compass c. Are relative d. Must have deviation applied before being used

Description : The VOR indications on an RMI whose deviation is not zero: a. Are magnetic b. Are compass c. Are relative d. Must have deviation applied before being used

Last Answer : a. Are magnetic

If an ATC clearance is not suitable, the PIC may: a. Offer ATC an acceptable clearance b. Request and if practicable accept an amended clearance c. Demand an alternative clearance and ATC must comply d. Decline the clearance on the grounds that it is not in accordance with the field flight plan

Description : If an ATC clearance is not suitable, the PIC may: a. Offer ATC an acceptable clearance b. Request and if practicable accept an amended clearance c. Demand an alternative clearance and ATC must ... d. Decline the clearance on the grounds that it is not in accordance with the field flight plan

Last Answer : b. Request and if practicable accept an amended clearance

Which of the following is an obligation of being an ICAO contracting state? a. ICAO must be informed about all new flight crew licenses and any suspended validity of such licenses b. ICAO must be informed about differences from the standards detailed in any of the annexes to the Chicago convention c. ICAO must approve the pricing of tickets on international airline connections d. ICAO must be informed about changes to national regulations

Description : Which of the following is an obligation of being an ICAO contracting state? a. ICAO must be informed about all new flight crew licenses and any suspended validity of such licenses ... of tickets on international airline connections d. ICAO must be informed about changes to national regulations

Last Answer : b. ICAO must be informed about differences from the standards detailed in any of the annexes to the Chicago convention

Which Mode A code must be used to make sure that your aircraft is recognized as an aircraft in distress? a. Code 7500 b. Code 7700 c. Code 7000 d. Code 7600

Description : Which Mode A code must be used to make sure that your aircraft is recognized as an aircraft in distress? a. Code 7500 b. Code 7700 c. Code 7000 d. Code 7600

Last Answer : b. Code 7700

What is required for an IFR flight in advisory airspace? a. No flight plan required b. Flight plan required and PIC must notify of any changes regardless if wanting advisory service or not c. Flight plan required but PIC need not notify of any changes d. A flight plan is only required if advisory service is required

Description : What is required for an IFR flight in advisory airspace? a. No flight plan required b. Flight plan required and PIC must notify of any changes regardless if wanting advisory service or not c ... need not notify of any changes d. A flight plan is only required if advisory service is required

Last Answer : b. Flight plan required and PIC must notify of any changes regardless if wanting advisory service or not

For a controlled flight before departure, a flight plan must be filed at least: a. 50 minutes before off-block time b. 60 minutes before departure c. 10 minutes before departure d. 30 minutes before off-block time

Description : For a controlled flight before departure, a flight plan must be filed at least: a. 50 minutes before off-block time b. 60 minutes before departure c. 10 minutes before departure d. 30 minutes before off-block time

Last Answer : b. 60 minutes before departure