A microporgram is sequencer perform the operation a. read b. write c. execute d. read and write e. read and execute

A microporgram is sequencer perform the operation  
a. read
b. write
c. execute
d. read and write
e. read and execute
by

1 Answer

Answer :

e. read and execute
by

Related questions

The necessary steps carried out to perform the operation of accessing either memory or I/O Device, constitute a ___________________ a) fetch operation b) execute operation c) machine cycle

Description : The necessary steps carried out to perform the operation of accessing either memory or I/O Device, constitute a ___________________ a) fetch operation b) execute operation c) machine cycle

Last Answer : c) machine cycle

Who is the represents the fundamental process in the operation of the CPU: a. The fetch-execute cycle and pipelining b. The assembly c. Both A and B d. None of these

Description : Who is the represents the fundamental process in the operation of the CPU: a. The fetch-execute cycle and pipelining b. The assembly c. Both A and B d. None of these

Last Answer : a. The fetch-execute cycle and pipelining

CPU does not perform the operation a. data transfer b. logic operation c. arithmetic operation d. all of above

Description : CPU does not perform the operation a. data transfer b. logic operation c. arithmetic operation d. all of above

Last Answer : b. logic operation

The secondary storage devices can only store data but they cannot perform a. Arithmetic Operation b. Logic operation c. Fetch operations d. Either of the above

Description : The secondary storage devices can only store data but they cannot perform a. Arithmetic Operation b. Logic operation c. Fetch operations d. Either of the above

Last Answer : d. Either of the above

The CPU removes the ___ signal to complete the memory write operation: a. Read b. Write c. Both A and B d. None of these

Description : The CPU removes the ___ signal to complete the memory write operation: a. Read b. Write c. Both A and B d. None of these

Last Answer : a. Read

Pipeline implement a. fetch instruction b. decode instruction c. fetch operand d. calculate operand e. execute instruction f. all of abve

Description : Pipeline implement a. fetch instruction b. decode instruction c. fetch operand d. calculate operand e. execute instruction f. all of abve

Last Answer : f. all of abve

The fetch-execute cycle is to use a system know as: a. Assembly line b. Pipelining c. Cache d. None of these

Description : The fetch-execute cycle is to use a system know as: a. Assembly line b. Pipelining c. Cache d. None of these

Last Answer : b. Pipelining

How can we make computers work faster? a. The fetch-execute cycle and pipelining b. The assembly c. Both A and B d. None of these

Description : How can we make computers work faster? a. The fetch-execute cycle and pipelining b. The assembly c. Both A and B d. None of these

Last Answer : a. The fetch-execute cycle and pipelining

The language that the computer can understand and execute is called a. Machine language b. Application software c. System program d. All of above

Description : The language that the computer can understand and execute is called a. Machine language b. Application software c. System program d. All of above

Last Answer : a. Machine language

Which are the READ operation can in simple steps: a. Address b. Data c. Control d. All of these

Description : Which are the READ operation can in simple steps: a. Address b. Data c. Control d. All of these

Last Answer : d. All of these

Which of the following statements on DRAM are correct? i) Page mode read operation is faster than RAS read. ii) RAS input remains active during column address strobe. iii) The row and column addresses are strobed into the internal buffers using RAS and CAS inputs respectively. a) i & iii b) i & ii c) all d) iii

Description : Which of the following statements on DRAM are correct? i) Page mode read operation is faster than RAS read. ii) RAS input remains active during column address strobe. iii) The row and column addresses are strobed into the ... RAS and CAS inputs respectively. a) i & iii b) i & ii c) all d) iii

Last Answer : d) iii

RIM is used to check whether, ______ a) The write operation is done or not b) The interrupt is Masked or not c) a & b

Description : RIM is used to check whether, ______ a) The write operation is done or not b) The interrupt is Masked or not c) a & b

Last Answer : b) The interrupt is Masked or not

What is the control unit's function in the CPU? a. To transfer data to primary storage b. to store program instruction c. to perform logic operations d. to decode program instruction

Description : What is the control unit's function in the CPU? a. To transfer data to primary storage b. to store program instruction c. to perform logic operations d. to decode program instruction

Last Answer : b. to store program instruction

The first machine to successfully perform a long series of arithmetic and logical operations was: a. ENIAC b. Mark-I c. Analytic Engine d. UNIVAC-1

Description : The first machine to successfully perform a long series of arithmetic and logical operations was: a. ENIAC b. Mark-I c. Analytic Engine d. UNIVAC-1

Last Answer : b. Mark-I

programs designed to perform specific tasks is known as a. system software b. application software c. utility programs d. operating system

Description : programs designed to perform specific tasks is known as a. system software b. application software c. utility programs d. operating system

Last Answer : c. utility programs

The first machine to successfully perform a long series of arithmetic and logical operations was; a. ENIAC b. Mark I c. Analytic engine d. UNIVAC-I

Description : The first machine to successfully perform a long series of arithmetic and logical operations was; a. ENIAC b. Mark I c. Analytic engine d. UNIVAC-I

Last Answer : b. Mark I

The proper definition of a modern digital computer is a. An electronic automated machine that can solve problems involving words and numbers b. A more sophistic and modified electronic pocket calculator c. Any machine that can perform mathematical operations d. A machine that works on binary code

Description : The proper definition of a modern digital computer is a. An electronic automated machine that can solve problems involving words and numbers b. A more sophistic and modified electronic pocket calculator c. Any machine that can perform mathematical operations d. A machine that works on binary code

Last Answer : d. A machine that works on binary code

Which of the following instruction perform jump indirect relative to DPTR a) JMP A+DPTR b) JMP DPTR c) JMP @A+DPTR d) SJMP A+DPTR

Description : Which of the following instruction perform jump indirect relative to DPTR a) JMP A+DPTR b) JMP DPTR c) JMP @A+DPTR d) SJMP A+DPTR

Last Answer : b) JMP DPTR

Which of the following instruction perform the move accumulator to external RAM of 16bit address? a) MOV @ DPTR, A b) MOVX @ Ri, A c) MOV A, @ Ri d) MOVX @ DPTR, A

Description : Which of the following instruction perform the move accumulator to external RAM of 16bit address? a) MOV @ DPTR, A b) MOVX @ Ri, A c) MOV A, @ Ri d) MOVX @ DPTR, A

Last Answer : c) MOV A, @ Ri

Which of the following instruction perform as of indirect RAM to accumulator? a) MOV A, Rn b) MOV @Ri, A c) MOV A, @Ri d) MOV Rn, A

Description : Which of the following instruction perform as of indirect RAM to accumulator? a) MOV A, Rn b) MOV @Ri, A c) MOV A, @Ri d) MOV Rn, A

Last Answer : c) MOV A, @Ri

IDIV and DIV instructions perform the same operations for? a) Unsigned number b) Signed number c) Signed number & Unsigned number d) none of above.

Description : IDIV and DIV instructions perform the same operations for? a) Unsigned number b) Signed number c) Signed number & Unsigned number d) none of above.

Last Answer : b) Signed number

Microprocessor is the ______ of the computer and it perform all the computational tasks

Description : Microprocessor is the ______ of the computer and it perform all the computational tasks  A. main B. heart C. important D. simple

Last Answer : Microprocessor is the heart of the computer and it performs all the computational tasks

The disk drive component used to position read/write heads over a specific track I known as a. Acoustic couples b. Access arm c. Cluster d. All of the above

Description : The disk drive component used to position read/write heads over a specific track I known as a. Acoustic couples b. Access arm c. Cluster d. All of the above

Last Answer : b. Access arm

Which of the following memories allows simultaneous read and write operations? a. ROM b. RAM c. EPROM d. None of above

Description : Which of the following memories allows simultaneous read and write operations? a. ROM b. RAM c. EPROM d. None of above

Last Answer : b. RAM

What is the number of read-write heads in the drive for a 9-trac magnetic tape? a. 9 b. 16 c. 18 d. 27

Description : What is the number of read-write heads in the drive for a 9-trac magnetic tape? a. 9 b. 16 c. 18 d. 27

Last Answer : a. 9

Reading data is performed in magnetic disk by a. Read/write leads b. Sectors c. Track d. Lower surface

Description : Reading data is performed in magnetic disk by a. Read/write leads b. Sectors c. Track d. Lower surface

Last Answer : a. Read/write leads

The CPU sends out a ____ signal to indicate that valid data is available on the data bus: a. Read b. Write c. Both A and B

Description : The CPU sends out a ____ signal to indicate that valid data is available on the data bus: a. Read b. Write c. Both A and B

Last Answer : b. Write

When memory write or I/O read are active data is from the processor: a. Input b. Output c. Processor d. None of these

Description : When memory write or I/O read are active data is from the processor: a. Input b. Output c. Processor d. None of these

Last Answer : b. Output

Which is not the control bus signal: a. READ b. WRITE c. RESET

Description : Which is not the control bus signal: a. READ b. WRITE c. RESET

Last Answer : c. RESET

CPU can read & write data by using : a. Control bus b. Data bus c. Address bus d. None of these

Description : CPU can read & write data by using : a. Control bus b. Data bus c. Address bus d. None of these

Last Answer : b. Data bus

In 8096, CCB bit 3 is ____. a) write strobe mode select b) address valid strobe select c) bus width select d) Internal read control mode

Description : In 8096, CCB bit 3 is ____. a) write strobe mode select b) address valid strobe select c) bus width select d) Internal read control mode

Last Answer : c) bus width select

In 8279 Status Word, data is read when ________ pins are low, and write to the display RAM with ____________ are low. a) A0, CS, RD & A0, WR, CS. b) CS, WR, A0 & A0, CS, RD c) A0, RD & WR, CS d) CS, RD & A0, CS.

Description : In 8279 Status Word, data is read when ________ pins are low, and write to the display RAM with ____________ are low. a) A0, CS, RD & A0, WR, CS. b) CS, WR, A0 & A0, CS, RD c) A0, RD & WR, CS d) CS, RD & A0, CS.

Last Answer : c) A0, RD & WR, CS

In 8096, CCB bit 3 is ____. a) write strobe mode select b) address valid strobe select c) bus width select d) Internal read control mode

Description : In 8096, CCB bit 3 is ____. a) write strobe mode select b) address valid strobe select c) bus width select d) Internal read control mode

Last Answer : b) address valid strobe select

The microprocessor can read/write 16 bit data from or to ________ A. memory B. I /O device C. processor D. register

Description : The microprocessor can read/write 16 bit data from or to ________ A. memory B. I /O device C. processor D. register

Last Answer : The microprocessor can read/write 16 bit data from or to memory 

If frequency of excitation of a forced vibration system with negligible damping is very close to natural frequency of the system, then the system will A) Execute harmonic motion of large amplitude B) Beat with a very high peak amplitude C) Perform aperiodic motion D) None of the above

Description : If frequency of excitation of a forced vibration system with negligible damping is very close to natural frequency of the system, then the system will A) Execute harmonic motion of large amplitude B) Beat with a very high peak amplitude C) Perform aperiodic motion D) None of the above

Last Answer : A) Execute harmonic motion of large amplitude

What is the best drum machine/sequencer for 60's pop rock?

Description : What is the best drum machine/sequencer for 60's pop rock?

Last Answer : answer:Logic Express (made by apple) is a good bet, and cheap at $150 otherwise there's Ableton Live, which is a bit more expensive but gets my recommendation. Note that these are full featured programs ... are going to be like Logic or Ableton and be versatile as long as you have the right samples.

What is protein sequencer? -Biology

Description : What is protein sequencer? -Biology

Last Answer : answer:

What is protein sequencer? -Biology

Description : What is protein sequencer? -Biology

Last Answer : answer:

Control signals used for DMA operation are ____________

Description : Control signals used for DMA operation are ____________

Last Answer : HOLD & HLDA.

The use of spooler programs and/or …. Hardware allows personal computer operators to do the processing work at the same time a printing operation is in progress a. Registered mails b. Memory c. CPU d. Buffer

Description : The use of spooler programs and/or …. Hardware allows personal computer operators to do the processing work at the same time a printing operation is in progress a. Registered mails b. Memory c. CPU d. Buffer

Last Answer : d. Buffer

Which operation is not performed by computer a. Inputting b. Processing c. Controlling d. Understanding

Description : Which operation is not performed by computer a. Inputting b. Processing c. Controlling d. Understanding

Last Answer : d. Understanding

A___ on this pin indicates a memory operation: a. Low b. High c. Medium d. None of these

Description : A___ on this pin indicates a memory operation: a. Low b. High c. Medium d. None of these

Last Answer : a. Low

MOC stands for: a. Memory operation complex b. Micro operation complex c. Memory operation complete d. None of these

Description : MOC stands for: a. Memory operation complex b. Micro operation complex c. Memory operation complete d. None of these

Last Answer : c. Memory operation complete

Which is the basic stack operation: a. PUSH b. POP c. BOTH A and B d. None of these

Description : Which is the basic stack operation: a. PUSH b. POP c. BOTH A and B d. None of these

Last Answer : c. BOTH A and B

Single address computer instruction has two parts: a. The operation code b. The operand c. A and B d. None of these

Description : Single address computer instruction has two parts: a. The operation code b. The operand c. A and B d. None of these

Last Answer : c. A and B

To prevent another master from taking over the bus during a critical operation, the 486 can assert its _____signal. a) LOCK# or PLOCK# b) HOLD or BOFF c) HLDA d) HOLD

Description : To prevent another master from taking over the bus during a critical operation, the 486 can assert its _____signal. a) LOCK# or PLOCK# b) HOLD or BOFF c) HLDA d) HOLD

Last Answer : a) LOCK# or PLOCK#

Virtual Mode Flag bit can be set using ____ instruction or any task switch operation only in the _____ mode a) IRET, Virtual b) POPF, Real c) IRET, protected d) POPF, protected

Description : Virtual Mode Flag bit can be set using ____ instruction or any task switch operation only in the _____ mode a) IRET, Virtual b) POPF, Real c) IRET, protected d) POPF, protected

Last Answer : b) POPF, Real

In 8255, under the I/O mode of operation we have __ modes. Under which mode will have the following features i) A 5 bit control port is available. ii) Three I/O lines are available at Port C. a) 3, Mode2 b) 2, Mode 2 c) 4, Mode 3 d) 3, Mode 2

Description : In 8255, under the I/O mode of operation we have __ modes. Under which mode will have the following features i) A 5 bit control port is available. ii) Three I/O lines are available at Port C. a) 3, Mode2 b) 2, Mode 2 c) 4, Mode 3 d) 3, Mode 2

Last Answer : a) 3, Mode2

In 8086 microprocessor one of the following instructions is executed before an arithmetic operation a) AAM b) AAD c) DAS d) DAA

Description : In 8086 microprocessor one of the following instructions is executed before an arithmetic operation a) AAM b) AAD c) DAS d) DAA

Last Answer : b) AAD