What type of material is used in the construction of bolometers and thermistors?

What type of material is used in the construction of  bolometers and thermistors?
by

1 Answer

Answer :

Temperature-sensitive material that exhibits a large negative  temperature coefficient.
by

Related questions

What are the two types of bolometers?

Description : What are the two types of bolometers?

Last Answer : Barretter and thermistor.

Which of the following materials is used in the construction of thermistors?

Description : Which of the following materials is used in the construction of thermistors? A) Pure metal B) Pure semiconductor C) Pure insulator D) Sintered mixture of metal oxides 

Last Answer : Which of the following materials is used in the construction of thermistors? A) Pure metal B) Pure semiconductor C) Pure insulator D) Sintered mixture of metal oxides 

What type of temperature coefficient do thermistors have?

Description : What type of temperature coefficient do thermistors have?  (1) Positive (2) Negative (3) Either positive or negative (4) None of these

Last Answer : Either positive or negative type of temperature coefficient do thermistors have.

Thermistors are used in __________ devices. (A) Voltage measuring (B) Temperature measuring(C) Temperature compensating (D) Both (B) & (C)

Description : Thermistors are used in __________ devices. (A) Voltage measuring (B) Temperature measuring Temperature compensating (D) Both (B) & (C)

Last Answer : Temperature compensating

Hall effect is associated with (A) Conductors. (B) Semiconductors. (C) Thermistors. (D) Solders.

Description : Hall effect is associated with (A) Conductors. (B) Semiconductors. (C) Thermistors. (D) Solders.

Last Answer : (B) Semiconductors.

___ sensors include thermocouples, thermistors, resistor temperature detectors (RTDs) and integratd circuits (ICs). A. Smoke Sensor B. Temperature Sensor C. IR Sensor D. Proximity Sensor

Description : ___ sensors include thermocouples, thermistors, resistor temperature detectors (RTDs) and integratd circuits (ICs). A. Smoke Sensor B. Temperature Sensor C. IR Sensor D. Proximity Sensor

Last Answer : B. Temperature Sensor 

What are the uses of Thermistors ?

Description : What are the uses of Thermistors ?

Last Answer : Thermistors are frequently used in electronic circuits in which it is desired to provide temperature measurement, temperature control, and temperature compensation.

Compare between RDTs and Thermistors.

Description : Compare between RDTs and Thermistors.

Last Answer : RTD Thermistor Made of metals like copper, platinum, nickel and tungsten. Made of metallic oxides such as cobalt, manganese, nickel etc. Have positive temperature coefficient of resistance ... are quite small in size and in shapes like washer, bead, probe, disc, etc.

State the working principle of thermistors

Description : State the working principle of thermistors 

Last Answer : A thermistor is a type of resistor whose resistance is dependent on temperature. Working principle: Whenever there is a change in temperature, the resistance of some semiconductors change . In case of ... . In case of NTC type, the resistance of the thermistor decreases with increase in temperature.

List applications of thermocouple and thermistors.

Description : List applications of thermocouple and thermistors.

Last Answer : Applications of Thermistors: 1. Widely used in the applications of the range from - 60oC to + 15oC. 2. Used as a sensor in liquid level, pressure, flow measurement systems. 3. Used for measurement ... 2. It is used for temperature measurement in cryogenic range. 3. It is used for flow measurement.

What kind of material must be used in the construction of waveguides?

Description : What kind of material must be used in the construction of waveguides?

Last Answer : Conductive material.

Other than the type of cell used, what is the major difference between the construction of the leadacid and nicad battery?

Description : Other than the type of cell used, what is the major difference between the construction of the leadacid and nicad battery?

Last Answer : The cells in the nicad battery can be replaced.

What is the major difference in grid construction between power pentodes and conventional pentodes?

Description : What is the major difference in grid construction between power pentodes and conventional pentodes?

Last Answer : Conventional pentodes have a staggered grid arrangement, while power pentodes have a shielded grid arrangement.

What is the main difference in construction between normal PN junction diodes and tunnel diodes?

Description : What is the main difference in construction between normal PN junction diodes and tunnel diodes?

Last Answer : The amount of doping.

What is the primary difference in construction between the basic magnetron and the negativeresistance magnetron?

Description : What is the primary difference in construction between the basic magnetron and the negativeresistance magnetron?

Last Answer : The negative-resistance magnetron has a split plate

How do the two types of monolithic IC construction differ?

Description : How do the two types of monolithic IC construction differ?

Last Answer : Diffusion penetrates substrate; epitaxial does not

Name the two types of monolithic IC construction discussed.

Description : Name the two types of monolithic IC construction discussed.

Last Answer : Diffusion; epitaxial growth

What is a major advantage of modular construction?

Description : What is a major advantage of modular construction?

Last Answer : Rapid repair of systems and improved efficiency

The way a magnetic head will be used determines how it is constructed. Name three factors that determine the final construction of a magnetic head.

Description : The way a magnetic head will be used determines how it is constructed. Name three factors that determine the final construction of a magnetic head.

Last Answer : a. Type of head (record, reproduce, or erase). b. Frequencies it will record or reproduce. c. Whether it will be used on a single or multitrack recorder.

How can loss be reduced during construction (or fabrication) of optical fibers?

Description : How can loss be reduced during construction (or fabrication) of optical fibers?

Last Answer : By removing the impurities from optical fiber.

The source and drain of an N-channel JFET are made of what type of material?

Description : The source and drain of an N-channel JFET are made of what type of material?

Last Answer : N-type material.

In the tunnel diode, the tunneling current is at what level when the forbidden gap of the N-type material is at the same energy level as the empty states of the P-type material?

Description : In the tunnel diode, the tunneling current is at what level when the forbidden gap of the N-type material is at the same energy level as the empty states of the P-type material?

Last Answer : Minimum.

What type of rectifier is constructed by sandwiching a section of semiconductor material between two metal plates?

Description : What type of rectifier is constructed by sandwiching a section of semiconductor material between two metal plates?

Last Answer : Metallic rectifier.

Conduction in which type of semiconductor material is similar to conduction in a copper wire?

Description : Conduction in which type of semiconductor material is similar to conduction in a copper wire?

Last Answer : N-type material.

What type of PN diode is formed by using a fine metal wire and a section of N-type semiconductor material?

Description : What type of PN diode is formed by using a fine metal wire and a section of N-type semiconductor material?

Last Answer : Point-contact.

Abrasion, cutting, and peeling are examples of what type of protective material removal?

Description : Abrasion, cutting, and peeling are examples of what type of protective material removal?

Last Answer : Mechanical.

What type of magnetic material should be used to make a temporary magnet?

Description : What type of magnetic material should be used to make a temporary magnet?

Last Answer : A material that exhibits low reluctance and high permeability, such as iron or soft steel.

What is the most common type of nonmetallic material used to protect wires and cables?

Description : What is the most common type of nonmetallic material used to protect wires and cables?

Last Answer : Fibrous Braid.

What type of temperature coefficient material does not produce increased heat in response to increased current flow?

Description : What type of temperature coefficient material does not produce increased heat in response to increased current flow?

Last Answer : Zero-temperature coefficient.

The basic control action of a magnetic amplifier depends upon _____________. A. variations in the load capacitance B. changes in inductance C. type of core material D. construction of the core

Description : The basic control action of a magnetic amplifier depends upon _____________. A. variations in the load capacitance B. changes in inductance C. type of core material D. construction of the core

Last Answer : Answer: B

A suitable material of construction to use with fuming sulphuric acid is (A) Carbon steel (B) Stainless steel type 304 (C) Nickel (D) Monel

Description : A suitable material of construction to use with fuming sulphuric acid is (A) Carbon steel (B) Stainless steel type 304 (C) Nickel (D) Monel

Last Answer : (D) Monel

What is the purpose of the absorbent material in a directional coupler?

Description : What is the purpose of the absorbent material in a directional coupler?

Last Answer : Absorb the energy not directed at the pick-up probe and a portion of the overall energy

. In a MOSFET, which element is insulated from the channel material?

Description : . In a MOSFET, which element is insulated from the channel material?

Last Answer : The gate terminal.

The substrate of an N-channel MOSFET is made of what material?

Description : The substrate of an N-channel MOSFET is made of what material?

Last Answer : P-type material.

In order to reverse bias in a PN junction, what terminal of a battery is connected to the P material?

Description : In order to reverse bias in a PN junction, what terminal of a battery is connected to the P material?

Last Answer : Negative.

What is the name given to a piece of pure semiconductor material that has an equal number of electrons and holes?

Description : What is the name given to a piece of pure semiconductor material that has an equal number of electrons and holes?

Last Answer : Intrinsic.

What types of losses cause the dielectric material between the conductors to be heated?

Description : What types of losses cause the dielectric material between the conductors to be heated?

Last Answer : Dielectric losses.

Reduction of Fresnel reflection is possible by reducing the step change in the refractive index at the fiber interface. What material reduces the step change in refractive index at a fiber interface?

Description : Reduction of Fresnel reflection is possible by reducing the step change in the refractive index at the fiber interface. What material reduces the step change in refractive index at a fiber interface?

Last Answer : Index matching gel.

In addition to a primary coating, manufacturers add a layer of buffer material for what reasons?

Description : In addition to a primary coating, manufacturers add a layer of buffer material for what reasons?

Last Answer : To provide additional mechanical protection and preserve the fiber's inherent strength.

Which method, vapor phase oxidation or direct-melt process, transforms deposited material into a solid glass preform by heating the porous material without melting?

Description : Which method, vapor phase oxidation or direct-melt process, transforms deposited material into a solid glass preform by heating the porous material without melting?

Last Answer : Vapor phase oxidation.

In single mode operation, the value of the normalized frequency (V) should remain near the 2.405 level. If the value of V is less than 1, do single mode fibers carry a majority of the power in the core or cladding material?

Description : In single mode operation, the value of the normalized frequency (V) should remain near the 2.405 level. If the value of V is less than 1, do single mode fibers carry a majority of the power in the core or cladding material?

Last Answer : Cladding material.

Light travels faster in a material with a lower refractive index. Therefore, light rays that travel a longer distance in a lower refractive index travel at a greater average velocity. What effect does this have on multimode graded-index fiber modal dispersion and bandwidth?

Description : Light travels faster in a material with a lower refractive index. Therefore, light rays that travel a longer distance in a lower refractive index travel at a greater average velocity. What effect does this have on multimode graded-index fiber modal dispersion and bandwidth?

Last Answer : Decreases the time difference between light rays, which reduces modal dispersion and increases fiber bandwidth.

Why should the coating material be replaced once the required repair has been completed?

Description : Why should the coating material be replaced once the required repair has been completed?

Last Answer : To ensure protective characteristics are maintained

What chemicals are used to remove protective material?

Description : What chemicals are used to remove protective material?

Last Answer : Solvents or xylene and trichloroethane.

What three methods are used to remove protective material?

Description : What three methods are used to remove protective material?

Last Answer : Chemical, mechanical, and thermal.

What material is applied to electronic assemblies to prevent damage from corrosion, moisture, and stress?

Description : What material is applied to electronic assemblies to prevent damage from corrosion, moisture, and stress?

Last Answer : Conformal coating

What term describes a material whose resistance remains relatively constant with changes in temperature?

Description : What term describes a material whose resistance remains relatively constant with changes in temperature?

Last Answer : Zero temperature coefficient.

Which temperature coefficient indicates a material whose resistance increases as temperature increases?

Description : Which temperature coefficient indicates a material whose resistance increases as temperature increases?

Last Answer : Positive.

Using Weber’s molecular theory of magnetism, describe the polarity of the magnetic poles produced by stroking a magnetic material from right to left with the south pole of a magnet.

Description : Using Weber’s molecular theory of magnetism, describe the polarity of the magnetic poles produced by stroking a magnetic material from right to left with the south pole of a magnet.

Last Answer : South pole at the right, north pole at the left.

Which dispersion mechanism (material or waveguide) is a function of the size of the fiber's core relative to the wavelength of operation?

Description : Which dispersion mechanism (material or waveguide) is a function of the size of the fiber's core relative to the wavelength of operation?

Last Answer : Waveguide dispersion.