Ferrite devices are useful in microwave applications because they possess what properties?

Ferrite devices are useful in microwave applications  because they possess what properties?
by

1 Answer

Answer :

Magnetic properties and high resistance
by

Related questions

Steels with high carbon equivalent have poor Weldability, because in these steels during welding (A) Carbon and other alloying elements get oxidised from the weld pool (B) Excessive ferrite forms in the heat affected zone leading to poor toughness of the weld (C) Martensite forms in the heat affected zone leading to poor toughness/ductility of the weld (D) Segregation of carbon and other element occurs in the weld pool leading to poor properties of the weld

Description : Steels with high carbon equivalent have poor Weldability, because in these steels during welding (A) Carbon and other alloying elements get oxidised from the weld pool (B) Excessive ferrite forms in the ... of carbon and other element occurs in the weld pool leading to poor properties of the weld

Last Answer : (C) Martensite forms in the heat affected zone leading to poor toughness/ductility of the weld

Referred to as a ferrite device that can be used in lieu of a duplexer to isolate a microwave transmitter and receiver when both are connected to the same antenna. A. Isolator B. Circulator C. Coupler D. Diode.

Description : Referred to as a ferrite device that can be used in lieu of a duplexer to isolate a microwave transmitter and receiver when both are connected to the same antenna. A. Isolator B. Circulator C. Coupler D. Diode.

Last Answer : B. Circulator

When microwave energy is passed through a piece of ferrite in a magnetic field, another effect occurs. If the frequency of the microwave energy is much greater than the electron wobble frequency, the plane of polarization of the wavefront is rotated. This is known as

Description : When microwave energy is passed through a piece of ferrite in a magnetic field, another effect occurs. If the frequency of the microwave energy is much greater than the electron wobble frequency, the plane of polarization of the wavefront is rotated. This is known as

Last Answer : Faraday Rotation Effect

Rotating the plane of polarization of a wavefront by passing it through a ferrite device is called what?

Description : Rotating the plane of polarization of a wavefront by passing it through a ferrite device is called what?

Last Answer : . Faraday rotation.

Draw the structure and state applications of: i) Ferrite loop (rod) antenna ii) Horn antenna

Description : Draw the structure and state applications of: i) Ferrite loop (rod) antenna ii) Horn antenna

Last Answer : Horn antenna: Application:- i) Used at microwave frequency. ii) Used in satellite tracking.  Ferrite loop antenna: Application:- In Am radio receiver to receive MW and SW band signals. In FM radio receiver

The constituent of cement which is responsible for all the undesirable properties of cement is (A) Di-calcium silicate (B) Tri-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Description : The constituent of cement which is responsible for all the undesirable properties of cement is (A) Di-calcium silicate (B) Tri-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Last Answer : Answer: Option C

Hormone receptors possess all the following properties except (A) All of them are proteins (B) They possess a recognition domain (C) They bind hormones with a high degree of specificity (D) Number of receptors in a target cell is constant

Description : Hormone receptors possess all the following properties except (A) All of them are proteins (B) They possess a recognition domain (C) They bind hormones with a high degree of specificity (D) Number of receptors in a target cell is constant

Last Answer : Answer : D

Bence-Jones proteins possess all the following properties except (A) They are dimers of light chains (B) Their amino acids sequences are identical (C) Their N-terminal halves have variable amino acid sequences (D) Their C-terminal halves have constant amino acid sequences

Description : Bence-Jones proteins possess all the following properties except (A) They are dimers of light chains (B) Their amino acids sequences are identical (C) Their N-terminal halves have variable amino acid sequences (D) Their C-terminal halves have constant amino acid sequences

Last Answer : Answer : B

What are transition elements? (1) Elements whose two outermost shells are incomplete (2) Elements which possess properties of both, metals and non-metals (3) They have eight electrons in the outermost shell (4) Elements whose three outermost shells are incomplete

Description : What are transition elements? (1) Elements whose two outermost shells are incomplete (2) Elements which possess properties of both, metals and non-metals (3) They have eight electrons in the outermost shell (4) Elements whose three outermost shells are incomplete

Last Answer : (1) Elements whose two outermost shells are incomplete

71 High frequency transformers sometimes make use of ferrite cores because it has A. High specific gravity B. High resistance C. High hysteresis D. low permeability

Description : 71 High frequency transformers sometimes make use of ferrite cores because it has A. High specific gravity B. High resistance C. High hysteresis D. low permeability

Last Answer : B. High resistance

A ferrite core has less eddy current loss than an iron core because ferrites have (A) High resistance. (B) Low resistance. (C) Low permeability. (D) High hysteresis.

Description : A ferrite core has less eddy current loss than an iron core because ferrites have (A) High resistance. (B) Low resistance. (C) Low permeability. (D) High hysteresis.

Last Answer : (A) High resistance.

A ferrite core has less eddy current loss than an iron core because?

Description : A ferrite core has less eddy current loss than an iron core because?

Last Answer : A ferrite core has less eddy current loss than an iron core because ferrites have high hysteresis.

Metals, in general are of low strength and do not possess required physio-chemical and technological properties for a definite purpose. Alloys are therefore more than metals alone. Discuss the arrangement of atoms and Structures of alloys.

Description : Metals, in general are of low strength and do not possess required physio-chemical and technological properties for a definite purpose. Alloys are therefore more than metals alone. Discuss the arrangement of atoms and Structures of alloys.

Last Answer : Alloys are produced by melting or sintering two ore more metals, or metals and a non-metal, together. Alloys possess typical properties inherent in the metallic state. The chemical elements ... an alloy are its individual portions, each having a single structure with its characteristic features.

Elements which are not distinctively metals and possess some physical properties of non- metals are called

Description : Elements which are not distinctively metals and possess some physical properties of non- metals are called

Last Answer : metalloids.

Ceramic materials possess which of the following properties? a) Brittle and low dielectric constant b) Rigid and low dielectric constant c) Brittle and high dielectric constant d) Rigid and high dielectric constant

Description : Ceramic materials possess which of the following properties? a) Brittle and low dielectric constant b) Rigid and low dielectric constant c) Brittle and high dielectric constant d) Rigid and high dielectric constant

Last Answer : c) Brittle and high dielectric constant

Practical fluids (A) Are viscous (B) Possess surface tension (C) Are compressible(D) Possess all the above properties

Description : Practical fluids (A) Are viscous (B) Possess surface tension (C) Are compressible (D) Possess all the above properties

Last Answer : Answer: Option D

The plastics made from cellulose resin (A) Are as clear as glass (B) Are tough and strong (C) Possess excellent electrical properties (D) All the above

Description : The plastics made from cellulose resin (A) Are as clear as glass (B) Are tough and strong (C) Possess excellent electrical properties (D) All the above

Last Answer : Answer: Option D

The conventional H1 antihistaminics possess the following additional properties except: A. Local anaesthetic B. Vasopressor C. Antiarrhythmic D. Catecholamine potentiating

Description : The conventional H1 antihistaminics possess the following additional properties except: A. Local anaesthetic B. Vasopressor C. Antiarrhythmic D. Catecholamine potentiating

Last Answer : B. Vasopressor

The conventional H1 antihistaminics possess the following additional properties except: A. Local anaesthetic B. Vasopressor C. Antiarrhythmic D. Catecholamine potentiating

Description : The conventional H1 antihistaminics possess the following additional properties except: A. Local anaesthetic B. Vasopressor C. Antiarrhythmic D. Catecholamine potentiating

Last Answer : B. Vasopressor

Which one of the following best defines the word “allotropes”? A Different structural forms of an element B A pair of substances that differ by H+ C Elements that possess properties intermediate between those of metals and nonmetals D Atoms of a given atomic number that have a specific number of neutrons E The different phases (solid, liquid or gas) of a substance

Description : Which one of the following best defines the word allotropes ? A Different structural forms of an element B A pair of substances that differ by H+ C Elements that possess properties intermediate between ... a specific number of neutrons E The different phases (solid, liquid or gas) of a substance

Last Answer : A Different structural forms of an element 

Although saturable reactors are extremely useful in some applications, their gain is low because of ____________. A. core hysteresis losses B. inductive reactance in the control winding C. IR drop throughout the load winding D. all of the above

Description : Although saturable reactors are extremely useful in some applications, their gain is low because of ____________. A. core hysteresis losses B. inductive reactance in the control winding C. IR drop throughout the load winding D. all of the above

Last Answer : Answer: A

. Why are coaxial lines more efficient at microwave frequencies than two-wire transmission lines?

Description : . Why are coaxial lines more efficient at microwave frequencies than two-wire transmission lines?

Last Answer : The electromagnetic fields are completely confined

Microwave theory is based upon what concept

Description : Microwave theory is based upon what concept

Last Answer : Electromagnetic field theory.

What causes dc bias energy to be absorbed by avalanche electrons and given up to the microwave field applied to an avalanche transit-time diode?

Description : What causes dc bias energy to be absorbed by avalanche electrons and given up to the microwave field applied to an avalanche transit-time diode?

Last Answer : The negative-resistance property.

How does a waveguide-type lens focus spherical wavefront microwave energy?

Description : How does a waveguide-type lens focus spherical wavefront microwave energy?

Last Answer : Some wavefronts are accelerated so that all wavefronts exit the lens at the same time

Microwave antennas and low-frequency antennas are similar in what ways?

Description : Microwave antennas and low-frequency antennas are similar in what ways?

Last Answer : Operating principles and electrical characteristics.

Identify the devices that do not use electromagnetic energy. a) Television b) Washing machine c) Microwave oven d) Mobile phones

Description : Identify the devices that do not use electromagnetic energy. a) Television b) Washing machine c) Microwave oven d) Mobile phones

Last Answer : b) Washing machine

Which of the following is a negative-resistance microwave device for oscillator applications?

Description :  Which of the following is a negative-resistance microwave device for oscillator applications? A) IMPATT Diode B) Gunn Diode C) Snap diode D) Schottky Diode 

Last Answer :  Which of the following is a negative-resistance microwave device for oscillator applications? A) IMPATT Diode B) Gunn Diode C) Snap diode D) Schottky Diode 

Write the properties of microwave ?

Description : Write the properties of microwave ?

Last Answer : Features of Microwave Microwave system consists of two transceivers. One is used to transmit signals and the other is used to receive signals. The antenna used in microwave systems is mounted on ... be transmitted over long distances without interruption. The microwave cannot move in a crooked way.

What is the difference between austenite stabilisers and ferrite stabilisers ?

Description : What is the difference between austenite stabilisers and ferrite stabilisers ?

Last Answer : Austenite stabilisers have the effect of extending the temperature range overwhich austenite is formed. Such elements are carbon, manganese, nickel, copper and cobalt. Ferrite stabilisers have the ... is formed. Such elements are silicon, chromium, molybdenum, tungsten, titanium and niobium.

Explain the difference between ferrite, austenite and graphite ?

Description : Explain the difference between ferrite, austenite and graphite ?

Last Answer : Ferrite is the solid solution of carbon and other constituents in alpha-iron. It is soft, ductile and relatively weak. Austenite is the solid solution of carbon and other constituents in ... is also found at ordinary temperatures in some stainless steels. Graphite has a hexagonal layer lattice.

How can intermodulation interference between two transmitters in close proximity reduced or eliminated? A. Through installing a band-pass filter in the antenna feed line B. Through installing terminated circulator or ferrite isolator in the feed line of the transmitter and duplexer C. By using a class C final amplifier with high driving power D. By installing a low-pass filter in the antenna feed line

Description : How can intermodulation interference between two transmitters in close proximity reduced or eliminated? A. Through installing a band-pass filter in the antenna feed line B. Through installing terminated circulator ... high driving power D. By installing a low-pass filter in the antenna feed line

Last Answer : A. Through installing a band-pass filter in the antenna feed line

Which of the following is the hardest? (A) Cementite (B) Pearlite (C) Austenite (D) Ferrite

Description : Which of the following is the hardest? (A) Cementite (B) Pearlite (C) Austenite (D) Ferrite

Last Answer : (C) Austenite

Pearlite comprises of (A) 87% cementite & 13% Fe (B) 87% ferrite & 13% cementite (C) 93.33% ferrite & 6.67% C (D) 87% ferrite & 13% C

Description : Pearlite comprises of (A) 87% cementite & 13% Fe (B) 87% ferrite & 13% cementite (C) 93.33% ferrite & 6.67% C (D) 87% ferrite & 13% C

Last Answer : (B) 87% ferrite & 13% cementite

Heating the Hypo-eutectoid steels to 30°C above the upper critical temperature line, soaking at that temperature and then cooling slowly to the room temperature to form a pearlite & ferrite structure is called (A) Tempering (B) Hardening (C) Annealing (D) Normalising

Description : Heating the Hypo-eutectoid steels to 30°C above the upper critical temperature line, soaking at that temperature and then cooling slowly to the room temperature to form a pearlite & ferrite structure is called (A) Tempering (B) Hardening (C) Annealing (D) Normalising

Last Answer : Option C

Eutectoid composition of carbon steel at room temperature is (A) Cementite (B) Pearlite(C) Martensite (D) Ferrite

Description : Eutectoid composition of carbon steel at room temperature is (A) Cementite (B) Pearlite (C) Martensite (D) Ferrite

Last Answer : Option B

During decarburising of a plain carbon steel, the thickness of ferrite layer growth is proportional to (A) Time (B) Square root of time (C) Square of time (D) Cube of time

Description : During decarburising of a plain carbon steel, the thickness of ferrite layer growth is proportional to (A) Time (B) Square root of time (C) Square of time (D) Cube of time

Last Answer : Option B

Secondary hardening in steels arises out of the (A) Precipitation of fine alloy carbides at high temperatures (B) Refinement of ferrite grain size by working (C) Decomposition of retained austenite upon heat treatment (D) Precipitation of complex inter-metallic upon heat treatment

Description : Secondary hardening in steels arises out of the (A) Precipitation of fine alloy carbides at high temperatures (B) Refinement of ferrite grain size by working (C) Decomposition of retained austenite upon heat treatment (D) Precipitation of complex inter-metallic upon heat treatment

Last Answer : Option C

Maraging steels derive their strength from the following mechanism: (A) A fine, highly dislocated and strong martensite (B) Fine dispersions of inter-metallic of Fe, Ni, Ti etc (C) Fine dispersions of alloy carbides in a ferrite matrix (D) Fine dispersions of Fe3 C nucleated on dislocations in austenite

Description : Maraging steels derive their strength from the following mechanism: (A) A fine, highly dislocated and strong martensite (B) Fine dispersions of inter-metallic of Fe, Ni, Ti etc (C) Fine ... alloy carbides in a ferrite matrix (D) Fine dispersions of Fe3 C nucleated on dislocations in austenite

Last Answer : Option A

Hydration of cement is due to chemical action of water with (A) Tricalcium silicate and dicalcium silicate (B) Dicalcium silicate and tricalcium aluminate (C) Tricalcium aluminate and tricalcium alumino ferrite (D) All the above

Description : Hydration of cement is due to chemical action of water with (A) Tricalcium silicate and dicalcium silicate (B) Dicalcium silicate and tricalcium aluminate (C) Tricalcium aluminate and tricalcium alumino ferrite (D) All the above

Last Answer : Answer: Option D

The compound of Portland cement which reacts immediately with water and also sets first is (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Description : The compound of Portland cement which reacts immediately with water and also sets first is (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Last Answer : Answer: Option C

Initial setting of cement is caused due to (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Description : Initial setting of cement is caused due to (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Last Answer : Answer: Option C

The compound of Portland cement which contributes to the strength after two to three years is (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra-calcium alumino ferrite

Description : The compound of Portland cement which contributes to the strength after two to three years is (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra-calcium alumino ferrite

Last Answer : Answer: Option B

Pick up the compound responsible for early strength of cement from the following: (A) Tetra-calcium alumino-ferrite (B) Tri-calcium silicate (C) Tri-calcium aluminate (D) Di-calcium silicate

Description : Pick up the compound responsible for early strength of cement from the following: (A) Tetra-calcium alumino-ferrite (B) Tri-calcium silicate (C) Tri-calcium aluminate (D) Di-calcium silicate

Last Answer : Answer: Option B

Good quality cement contains higher percentage of (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Description : Good quality cement contains higher percentage of (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Last Answer : Answer: Option A

Ultimate strength to cement is provided by (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Description : Ultimate strength to cement is provided by (A) Tri-calcium silicate (B) Di-calcium silicate (C) Tri-calcium aluminate (D) Tetra calcium alumino ferrite

Last Answer : Answer: Option B

Rapid hardening cement contains (A) Tri-calcium silicate (B) Tri-calcium aluminate (C) Tetra-calcium alumino-ferrite (D) Di-calcium silicate

Description : Rapid hardening cement contains (A) Tri-calcium silicate (B) Tri-calcium aluminate (C) Tetra-calcium alumino-ferrite (D) Di-calcium silicate

Last Answer : Answer: Option A

In the cement the compound quickest to react with water, is (A) Tri-calcium aluminate (B) Tetra-calcium alumino-ferrite (C) Tri-calcium silicate (D) Di-calcium silicate

Description : In the cement the compound quickest to react with water, is (A) Tri-calcium aluminate (B) Tetra-calcium alumino-ferrite (C) Tri-calcium silicate (D) Di-calcium silicate

Last Answer : Answer: Option A

The development of first 28 days strength is on account of the hydration of (a) Tricalcium silicate (b) Dicalcium silicate (c) Tricalcium aluminate (d) Tetra calcium alumina ferrite

Description : The development of first 28 days strength is on account of the hydration of (a) Tricalcium silicate (b) Dicalcium silicate (c) Tricalcium aluminate (d) Tetra calcium alumina ferrite

Last Answer : (a) Tricalcium silicate

Draw a label diagram of ferrite core inductor.

Description : Draw a label diagram of ferrite core inductor.

Last Answer : Ferrite core inductor