Area under speed time curve gives a) Time b) Speed c) Distance d) None

Area under speed time curve gives
a) Time
b) Speed
c) Distance
d) None
by

1 Answer

Answer :

Ans: Distance
by

Related questions

The area under a load curve gives?

Last Answer : The area under a load curve gives energy consumed.

If is the speed of a locomotive in km per hour, g is the acceleration due to gravity, is the distance between running faces of the rails and is the radius of the circular curve, the required super elevation is (A) gV²/GR (B) Rg/GV² (C) GR/gV² (D) GV²/gR

Description : If is the speed of a locomotive in km per hour, g is the acceleration due to gravity, is the distance between running faces of the rails and is the radius of the circular curve, the required super elevation is (A) gV²/GR (B) Rg/GV² (C) GR/gV² (D) GV²/gR

Last Answer : (D) GV²/gR

To cover the greatest distance when gliding, the gliding speed must be: a. Near to the stalling speed b. As high as possible within VNE limits c. About 30% faster than Vmd d. The one that gives the highest L/D ratio

Description : To cover the greatest distance when gliding, the gliding speed must be: a. Near to the stalling speed b. As high as possible within VNE limits c. About 30% faster than Vmd d. The one that gives the highest L/D ratio

Last Answer : d. The one that gives the highest L/D ratio

The project report of final location survey gives tabulated statement of the following (a) Curve abstract (b) Gradient abstract (c) Bridge abstract (d) Important bridges (e) Station machinery (f) Stations and stations sites (g) All the above*

Description : The project report of final location survey gives tabulated statement of the following (a) Curve abstract (b) Gradient abstract (c) Bridge abstract (d) Important bridges (e) Station machinery (f) Stations and stations sites (g) All the above*

Last Answer : g) All the above*

The area under the Beta distribution curve is divided into two equal parts by (A) Most likely time (B) Optimistic time (C) Pessimistic time (D) Expected time

Description : The area under the Beta distribution curve is divided into two equal parts by (A) Most likely time (B) Optimistic time (C) Pessimistic time (D) Expected time

Last Answer : (D) Expected time

The area under stress-strain curve represents a.Hardness of material b.Breaking strength of the material c.Energy required to cause failure d.Toughness of material e.Malleabbility of material

Description : The area under stress-strain curve represents a.Hardness of material b.Breaking strength of the material c.Energy required to cause failure d.Toughness of material e.Malleabbility of material

Last Answer : c. Energy required to cause failure

What is the area under the curve on a temperature –entropy diagram?  a. Heat  b. work  c. entropy  d. volume

Description : What is the area under the curve on a temperature –entropy diagram?  a. Heat  b. work  c. entropy  d. volume

Last Answer : Heat

The area under the temperatureentropy curve (T – s curve) of any thermodynamic process represents  A. heat absorbed  B. heat rejected  C. either (a) or (b)  D. none of these

Description : The area under the temperatureentropy curve (T – s curve) of any thermodynamic process represents  A. heat absorbed  B. heat rejected  C. either (a) or (b)  D. none of these

Last Answer :  C. either (a) or (b)

The characteristic of non-linear pharmacokinetics include : (A) Area under the curve is proportional to the dose (B) Elimination half-life remains constant, (C) Area under the curve is not proportional to the dose (D) Amount of drug excreted through remains constant

Description : The characteristic of non-linear pharmacokinetics include : (A) Area under the curve is proportional to the dose (B) Elimination half-life remains constant, (C) Area under the curve is not proportional to the dose (D) Amount of drug excreted through remains constant

Last Answer : (C) Area under the curve is not proportional to the dose

For which type of motion, the distance time graph is not a straight line and can be any kind of curve? (1) Uniform motion (2) Circular motion (3) Non-uniform motion (4) Linear motion

Description : For which type of motion, the distance time graph is not a straight line and can be any kind of curve? (1) Uniform motion (2) Circular motion (3) Non-uniform motion (4) Linear motion

Last Answer : (3) Non-uniform motion Explanation: When the motion is uniform, the distance time graph is a straight line with a slope.When the motion is non-uniform, the distance time graph is not a straight line. It can be any kind of curve.

The parabola is defined mathematically as a curve generated by a point that moves suchthat its distance from the focus is always__________the distance to the directrix a.larger than b.smaller than c.equal to d.none of the above

Description : The parabola is defined mathematically as a curve generated by a point that moves suchthat its distance from the focus is always__________the distance to the directrix a.larger than b.smaller than c.equal to d.none of the above

Last Answer : c.equal to

Graph of potential energy against distance is A. curve B. parabolic C. hyperbolic D. straight line

Description : Graph of potential energy against distance is A. curve B. parabolic C. hyperbolic D. straight line

Last Answer : straight line

If +0.8% grade meets -0.7% grade and the rate of change of grade for 30 m distance is 0.05, the length of the vertical curve will be (A) 600 m (B) 700 m (C) 800 m (D) 900 m

Description : If +0.8% grade meets -0.7% grade and the rate of change of grade for 30 m distance is 0.05, the  length of the vertical curve will be  (A) 600 m  (B) 700 m  (C) 800 m  (D) 900 m

Last Answer : (D) 900 m

Pick up the correct statement from the following: (A) If the slope of the curve of a mass diagram in the direction of increasing abscissa is downward, it indicates an embankment (B) The vertical distance between a maximum ordinate and the next forward maximum ordinate represents the whole volume of the embankment (C) The vertical distance between a minimum ordinate and the next forward maximum ordinate represents the whole volume of a cutting (D) All the above

Description : Pick up the correct statement from the following: (A) If the slope of the curve of a mass diagram in the direction of increasing abscissa is downward, it indicates an embankment (B) The ... and the next forward maximum ordinate represents the whole volume of a cutting (D) All the above

Last Answer : (D) All the above

The maximum radial distance of a Lemniscate curve, having maximum polar angle a, is (A) 3 R (B) 3 R sin2 (C) 3 R (D) 3 R

Description : The maximum radial distance of a Lemniscate curve, having maximum polar angle a, is (A) 3 R (B) 3 R sin2 (C) 3 R (D) 3 R

Last Answer : Answer: Option C

If N is deviation angle the length L of a parabolic vertical curve for overtaking sight distance S, is (A) NS²/9.6 if L > S (B) NS²/9.6 if L < S (C) 2S - 9.6/N if L < S (D) Both (A) and (C)

Description : If N is deviation angle the length L of a parabolic vertical curve for overtaking sight distance S, is (A) NS²/9.6 if L > S (B) NS²/9.6 if L < S (C) 2S - 9.6/N if L < S (D) Both (A) and (C)

Last Answer : Answer: Option D

If N is the algebraic difference of grades, S is the minimum sight distance in metres, the length (L) of a summit curve is (A) NS/4 (B) NS²/4 (C) N²S/4(D) (NS)²/4

Description : If N is the algebraic difference of grades, S is the minimum sight distance in metres, the length (L) of a summit curve is (A) NS/4 (B) NS²/4 (C) N²S/4 (D) (NS)²/4

Last Answer : Answer: Option B

In an ideal transition curve, the radius of curvature (A) Is constant (B) At any point is directly proportional to its distance from the point of commencement (C) Is inversely proportional to the radius of main curve (D) Is directly proportional to the radius of main curve

Description : In an ideal transition curve, the radius of curvature (A) Is constant (B) At any point is directly proportional to its distance from the point of commencement (C) Is inversely proportional to the radius of main curve (D) Is directly proportional to the radius of main curve

Last Answer : Answer: Option C

The maximum distance of the apex of a vertical curve of length L from the point of intersection of two grades + g1%, and - g2% (g1 > g2), is (A) L(g - g (B) L(g - g (C) L(g g (D) L(g - g

Description : The maximum distance of the apex of a vertical curve of length L from the point of intersection of two grades + g1%, and - g2% (g1 > g2), is (A) L(g - g (B) L(g - g (C) L(g g (D) L(g - g

Last Answer : Answer: Option C

If N is the net difference of grades, S is the minimum overtaken sight distance in metres, the length (L) of a summit curve, is (A) NS/4 (B) NS²/4 (C) NS²/4.8 (D) NS²/9.6

Description : If N is the net difference of grades, S is the minimum overtaken sight distance in metres, the length (L) of a summit curve, is (A) NS/4 (B) NS²/4 (C) NS²/4.8 (D) NS²/9.6

Last Answer : Answer: Option D

If N is the algebraic difference of grades, S is the head light beam distance in metres, the length (L) of a valley curve, is (A) NS²/4 (B) NS²/6 (C) NS²/9.6 (D) NS²/4.8

Description : If N is the algebraic difference of grades, S is the head light beam distance in metres, the length (L) of a valley curve, is (A) NS²/4 (B) NS²/6 (C) NS²/9.6 (D) NS²/4.8

Last Answer : Answer: Option A

If N is deviation angle, the length L, of a parabolic vertical curve for safe stopping distance S, is(A) NS²/4.4 if L > S(B) 2S - 4.4/N if L < S(C) 2S - 4.4/N if L > S(D) Both (a) and (b)

Description : If N is deviation angle, the length L, of a parabolic vertical curve for safe stopping distance S, is (A) NS²/4.4 if L > S (B) 2S - 4.4/N if L < S (C) 2S - 4.4/N if L > S (D) Both (a) and (b)

Last Answer : Answer: Option D

For night travel, the length of a valley curve should be such that the head light beam distance is the same as (A) Stopping sight distance (B) Overtaking sight distance (C) Sum of (a) and (b) (D) Difference of (a) and (b)

Description : For night travel, the length of a valley curve should be such that the head light beam distance is the same as (A) Stopping sight distance (B) Overtaking sight distance (C) Sum of (a) and (b) (D) Difference of (a) and (b)

Last Answer : Answer: Option A

The vertical distance between the springing line and highest point of the inner curve of an arch is known as (A) Intrados (B) Rise (C) Spandril (D) Extrados

Description : The vertical distance between the springing line and highest point of the inner curve of an arch is known as (A) Intrados (B) Rise (C) Spandril (D) Extrados

Last Answer : Answer: Option B

Indicate which of the statement is incorrect with regard to coning of Wheels a)coning of wheels help the vehicle to negotiate a curve smoothly b) It helps in smooth riding c) It increases wear and Tear of wheel flanges* d)it enables the outer wheel of vehicle to take a longer distance e) it restricts the swaying of vehicles

Description : Indicate which of the statement is incorrect with regard to coning of Wheels a)coning of wheels help the vehicle to negotiate a curve smoothly b) It helps in smooth riding c) It increases ... enables the outer wheel of vehicle to take a longer distance e) it restricts the swaying of vehicles

Last Answer : c) It increases wear and Tear of wheel flanges*

Which of the following statements describes what will occur if the motor shown in the illustration is required to carry 150% of full load? EL-0056 A. The primary counter emf will be increased. B. The stator current will increase. C. The slip will decrease. D. The slip value, stator current curve, and torque curve will all coincide.

Description : Which of the following statements describes what will occur if the motor shown in the illustration is required to carry 150% of full load? EL-0056 A. The primary counter emf will be increased. B. ... slip will decrease. D. The slip value, stator current curve, and torque curve will all coincide.

Last Answer : Answer: B

The torque and current curves for a three-phase induction motor with a cage rotor, are shown in the illustration. Which of the following statements is true concerning the depicted curves? EL-0056 A. As slip increases, rotor reactance decreases. B. The pullout point on the torque curve is about seven times the normal full load torque value. C. At stand still, stator current is 150% of normal. D. If the motor is loaded to the point where 40% slip has resulted, it will stall.

Description : The torque and current curves for a three-phase induction motor with a cage rotor, are shown in the illustration. Which of the following statements is true concerning the depicted curves? EL-0056 A. As slip ... D. If the motor is loaded to the point where 40% slip has resulted, it will stall.

Last Answer : Answer: D

Write short note on load duration curve?

Description : Write short note on load duration curve?

Last Answer : When the load elements of a load curve are arranged in the order of descending magnitudes, the curve thus obtained is called load duration curve. The load curve is obtained from the same data as ... the values of load factor and diversity factor, lower will be the overall cost per unit generated.

What is load curve?

Description : What is load curve?

Last Answer : The curve showing the variation of load on the power station with reference to time is known as a load curve.

Define swing curve?

Description : Define swing curve?

Last Answer : The swing curve is the plot between the power angle and time. It is usually plotted for a transient state to stydy the nature of variation in angle for a sudden large disturbance.

Explain the principle of operation of attracted armature relay with equation and characteristics curve.

Description : Explain the principle of operation of attracted armature relay with equation and characteristics curve.

Last Answer : Principle: It works on the principle that when a current is passed through a coil magnetic lines of force develop and the coil behaves like a magnet. When we place a magnetic material inside the coil it is ... ) time delay. If we want a time delay we can add a slug in the armature core.  

Draw the transformer drying out curve and explain each stage.

Description : Draw the transformer drying out curve and explain each stage. 

Last Answer : When we start the filtering process initially the temperature will be low, as the insulation value is high. But on temperature increases the IR value starts to decrease because the moisture ... value goes up and as the heaters are off the temperature decreases. This is the third stage.

The purpose of a short circuit forcing module (short time trip) installed in a branch line is to provide ____________. A. high speed clearance of low impedance short circuits in the branch B. continuity of service on main bus under short circuit conditions in a branch C. isolation of short circuits by selective tripping of branch circuit breakers D. all of the above

Description : The purpose of a short circuit forcing module (short time trip) installed in a branch line is to provide ____________. A. high speed clearance of low impedance short circuits in the branch B. ... C. isolation of short circuits by selective tripping of branch circuit breakers D. all of the above

Last Answer : Answer: D

If a three-phase induction motor is operated under a light load and it develops an open in one of its supply lines, the motor will _____________. A. continue to run, but will vibrate and have reduced torque B. speed up due to the reduced number of poles C. run cooler due to reduced current flow D. stop

Description : If a three-phase induction motor is operated under a light load and it develops an open in one of its supply lines, the motor will _____________. A. continue to run, but will vibrate and have reduced ... speed up due to the reduced number of poles C. run cooler due to reduced current flow D. stop

Last Answer : Answer: A

If the centrifugal switch or relay used for cutting out the starting winding of a split-phase induction motor fails to open once the motor is in operation, the _____________. A. motor will overspeed B. starting winding will burn out C. motor will immediately stall under load D. motor torque will be above normal at rated speed

Description : If the centrifugal switch or relay used for cutting out the starting winding of a split-phase induction motor fails to open once the motor is in operation, the _____________. A. motor will overspeed B ... C. motor will immediately stall under load D. motor torque will be above normal at rated speed

Last Answer : Answer: B

Under normal conditions, the speed of a two-speed squirrel cage induction motor is changed by varying the ____________. A. frequency of the applied voltage B. resistance in the rotor circuit C. number of field poles D. amplitude of the applied voltage

Description : Under normal conditions, the speed of a two-speed squirrel cage induction motor is changed by varying the ____________. A. frequency of the applied voltage B. resistance in the rotor circuit C. number of field poles D. amplitude of the applied voltage

Last Answer : Answer: C

The torque-speed characteristics of an a.c. operated universal motor has a ______characteristic and it______ be started under no-load condition. (A) inverse, can (B) nearly inverse, can (C) inverse, cannot (D) nearly inverse, cannot

Description : The torque-speed characteristics of an a.c. operated universal motor has a ______characteristic and it______ be started under no-load condition. (A) inverse, can (B) nearly inverse, can (C) inverse, cannot (D) nearly inverse, cannot

Last Answer : Ans: C If torque is zero then speed may exceed up to infinite, that is dangerous for machine and machine can be damaged. N α 1/ T

The relative speed between the magnetic fields of stator and rotor under steady state operation is zero for a (A) dc machine. (B) 3 phase induction machine. (C) synchronous machine. (D) single phase induction machine.

Description : The relative speed between the magnetic fields of stator and rotor under steady state operation is zero for a (A) dc machine. (B) 3 phase induction machine. (C) synchronous machine. (D) single phase induction machine.

Last Answer : Ans: all options are correct

In quadrilateral speed-time curve of electric traction system, the accelerations during successive time periods

Description : In quadrilateral speed-time curve of electric traction system, the accelerations during successive time periods are ______ respectively.  (A) positive, negative and negative (B) positive, zero and negative (C) positive, positive and negative (D) positive, negative and zero

Last Answer : In quadrilateral speed-time curve of electric traction system, the accelerations during successive time periods are positive, negative and negative respectively. 

In electric traction for a trapezoidal speed-time curve, the time period is

Description : In electric traction for a trapezoidal speed-time curve, the time period is (A) free running speed period = constant speed period (B) free running period = coasting period (C) free running period + coasting period = constant speed period (D) average speed period = scheduled speed period

Last Answer : In electric traction for a trapezoidal speed-time curve, the time period is free running period + coasting period = constant speed period

Trapezoidal speed-time curve is

Description : Trapezoidal speed-time curve is (A) an exact representation of the conditions in Main-line traction service. (B) an exact representation of the conditions in Suburban traction service. (C) ... in Suburban traction service. (D) a close approximation of the conditions in Mainline traction service.

Last Answer : Trapezoidal speed-time curve is a close approximation of the conditions in Mainline traction service.

A convex lens is placed on an optical bench and is moved till it gives a real image of an object at a minimum distance of 80 cm from the latter. Find

Description : A convex lens is placed on an optical bench and is moved till it gives a real image of an object at a minimum distance of 80 cm from the latter. Find

Last Answer : A convex lens is placed on an optical bench and is moved till it gives a real image of an object ... cm from the lens, find the position of the image.

A frosted bulb which may be taken as an isotropic source, gives as illumination of `8lm//m^(2)` at a distance of 5m. Calculate (i) its luminous intens

Description : A frosted bulb which may be taken as an isotropic source, gives as illumination of `8lm//m^(2)` at a distance of 5m. Calculate (i) its luminous intens

Last Answer : A frosted bulb which may be taken as an isotropic source, gives as illumination of `8lm//m^(2)` ... and (ii) the total luminous flux from the blub.

In a thunderstorm the formula M t 5.1 Mt5.1 gives the approximate distance M M in miles from a lightning strike if it takes t t seconds to hear the thunder after seeing the lightning. If you are 8.9 m?

Description : In a thunderstorm the formula M t 5.1 Mt5.1 gives the approximate distance M M in miles from a lightning strike if it takes t t seconds to hear the thunder after seeing the lightning. If you are 8.9 m?

Last Answer : Need answer

Match List I with List II and select the correct answer by using the codes gives below the lists: List-I (Climatic conditions) List-II (Resons) A. Chennai is warmer than Kolkata 1. North-East Monsoon B. Snowfall in Himalayas 2. Altitude C. Rainfall decreases from West Bengal to Punjab 3. Western depressions D. Sutlej-Ganga Plain gets some rain in winter 4. Distance from sea 5. Latitude Codes: A B C D (a) 1 2 4 5 (b) 4 5 1 3 (c) 5 2 4 3 (d) 5 1 3 4

Description : Match List I with List II and select the correct answer by using the codes gives below the lists: List-I (Climatic conditions) List-II (Resons) A. Chennai is warmer than Kolkata 1. North-East Monsoon B. Snowfall in Himalayas 2. Altitude C. ... (a) 1 2 4 5 (b) 4 5 1 3 (c) 5 2 4 3 (d) 5 1 3 4

Last Answer : Ans: (c)

Which of the listed precautions should be observed before spraying liquid solvent on the insulation of an electric motor? A. Slow the motor down to low speed. B. Disconnect the motor from the power source. C. Secure all ventilation in the area. D. Preheat the insulation to assist in cleaning.

Description : Which of the listed precautions should be observed before spraying liquid solvent on the insulation of an electric motor? A. Slow the motor down to low speed. B. Disconnect the motor from the power source. C. Secure all ventilation in the area. D. Preheat the insulation to assist in cleaning.

Last Answer : Answer: B

If your multimeter gives a reading in ohms when testing each end of each conductor of a three-conductor cable, this indicates ______________. A. continuity of the conductor B. an infinite resistance C. the presence of a partial ground D. that the conductor is not short circuited

Description : If your multimeter gives a reading in ohms when testing each end of each conductor of a three-conductor cable, this indicates ______________. A. continuity of the conductor B. an infinite resistance C. the presence of a partial ground D. that the conductor is not short circuited

Last Answer : Answer: A

The illustrated motor fails to start and gives a loud hum when the start button is depressed, your first action should be to __________. EL-0007 A. disassemble the motor to fix the centrifical switch so the start windings will be energized B. push the stop button to deenergize the 'M' coil C. reset the thermal overload D. hold the 'M' contactor closed by hand while wearing electrical safety gloves to get motor started

Description : The illustrated motor fails to start and gives a loud hum when the start button is depressed, your first action should be to __________. EL-0007 A. disassemble the motor to fix the centrifical ... D. hold the 'M' contactor closed by hand while wearing electrical safety gloves to get motor started

Last Answer : Answer: B

The specific gravity of the electrolyte solution in a lead acid battery _____________. A. is not effected during charging B. remains the same during discharge C. would read close to 1.830 when discharged D. gives an indication of the state of charge of the battery

Description : The specific gravity of the electrolyte solution in a lead acid battery _____________. A. is not effected during charging B. remains the same during discharge C. would read close to 1.830 when discharged D. gives an indication of the state of charge of the battery

Last Answer : Answer: D