Cylinder mower has rotating blades arranged in cylindrical form. a. Straight c. inclined. d. None of above

Cylinder mower has rotating blades arranged in cylindrical form. a. Straight c. inclined. d. None of above
by

1 Answer

Answer :

Ans-                     b. helical

 


by

Related questions

In a flail harvester, the cutting operation is performed by a) Horizontally rotating circular blades b) Vertically rotating circular blades c) Knives mounted on a horizontal shaft d) Knives mounted on a vertical shaft Ans. c

Description : In a flail harvester, the cutting operation is performed by a) Horizontally rotating circular blades b) Vertically rotating circular blades c) Knives mounted on a horizontal shaft d) Knives mounted on a vertical shaft Ans. c

Last Answer : ans c

A mower knife is said to be in proper registration when the knife section stops in the ……………..of its guard ( fingers ) on every stroke a. offset c. inclined d. None of above

Description : A mower knife is said to be in proper registration when the knife section stops in the ……………..of its guard ( fingers ) on every stroke a. offset c. inclined d. None of above

Last Answer : <!-- [if !supportLists] -->a.  <!-- [endif] -->Ans-                     b. centre  

It is a mower with a knife made of several serrated triangular sections that reciprocate against stationary fingers. a. Rotary mower c. Cylinder mower. d. None of above

Description : It is a mower with a knife made of several serrated triangular sections that reciprocate against stationary fingers. a. Rotary mower c. Cylinder mower. d. None of above

Last Answer : Ans-   b. Reciprocating mower  

Induced draft fans provided in large thermal power plant boilers have __________ blades. (A) Forward curved (B) Backward curved (C) Double curved (D) Radial or straight

Description : Induced draft fans provided in large thermal power plant boilers have __________ blades. (A) Forward curved (B) Backward curved (C) Double curved (D) Radial or straight

Last Answer : (B) Backward curved

This type blades in rotary tiller are Suitable for deep tillage in relatively clean ground, but clogging and wrapping of trashes on the tynes and shafts. a. L c. straight d. None of the above

Description : This type blades in rotary tiller are Suitable for deep tillage in relatively clean ground, but clogging and wrapping of trashes on the tynes and shafts. a. L c. straight d. None of the above

Last Answer : Ans-  b. twisted

This type blades in rotary tiller are more effective in cutting weeds and they do not Pulverize the soil much. b. twisted c. straight d. None of the above

Description : This type blades in rotary tiller are more effective in cutting weeds and they do not Pulverize the soil much. b. twisted c. straight d. None of the above

Last Answer : Ans- a. ‘L’

Following is not type of blades ? a) ‗L‘ type blade. c) Twisted blade b) ‗M‘ type blade. d) Straight blade

Description : Following is not type of blades ? a) ‗L‘ type blade. c) Twisted blade b) ‗M‘ type blade. d) Straight blade

Last Answer : M‘ type blade.

how to level the cutting blades on a craftman zero turn riding mower

Description : how to level the cutting blades on a craftman zero turn riding mower

Last Answer : This same issue is covered here > http://www.bbcboards.net/bbc-lounge/370468-zero-turn-uneven-cut-problem-print.html

Is there a way to sharpen the blades on my riding lawn mower for a cleaner cut?

Description : Is there a way to sharpen the blades on my riding lawn mower for a cleaner cut?

Last Answer : To sharpen lawn mower blades, carefully unscrew the blades from the machine. Use a putty knife to scape off any residue. Then take a medium file and stroke the edge of the blade evenly.

Lawn Mower Blades?

Description : Lawn Mower Blades?

Last Answer : form_title= Lawn Mower Blades form_header= Keep your mower running smoothly with new blades. What is the make and model of your lawn mower?*= _ [50] How old is your mower?*= _ [50] Have you ever had to replace the blades before?*= () Yes () No

Maintaining Your Mower Blades?

Description : Maintaining Your Mower Blades?

Last Answer : For a healthy lawn, you should sharpen your lawnmower blades. Dull blades donï ½t cut your grass, they tear and damage it. You can use a file or a grinding wheel to sharpen them. You ... unevenly and put extra wear and tear on the lawnmower. This will eventually damage your lawnmowerï ½s engine.

Where can I buy lawn mower blades online?

Description : Where can I buy lawn mower blades online?

Last Answer : Most lawn mower blades are specific to the brand of lawnmower. I suggest the you to www.lawnmowerpros.com or www.mowpart.com/ to locate the right blade for you mower. Your search will go faster if you have the name of the model and the serial number handy.

A boy sitting in a rail road car throws a ball straight up into the air. The ball will fall back into his hands when the rail road car is a.moving at constant velocity b.accelerating forward while going around a curve of radius equal to the maximum height attained by the ball c.107 dynes d.accelerating forwardA block A is dropped down a smooth inclined plane, while another identical block B is released for free fall from the same height e.decelerating

Description : A boy sitting in a rail road car throws a ball straight up into the air. The ball will fall back into his hands when the rail road car is a.moving at constant velocity b.accelerating ... inclined plane, while another identical block B is released for free fall from the same height e.decelerating

Last Answer : a. moving at constant velocity

The locus of a point on a thread unwound from a cylinder will be a.A circle b.A cycloid c.A straight line d.A spiral e.An involute

Description : The locus of a point on a thread unwound from a cylinder will be a.A circle b.A cycloid c.A straight line d.A spiral e.An involute

Last Answer : b. A cycloid

A cylindrical specimen of saturated soil failed under an axial vertical stress of 100kN/m² when it was laterally unconfmed. The failure plane was inclined to the horizontal plane at an angle of 45°. The values of cohesion and angle of internal friction for the soil are respectively (A) 0.5 N/mm² and 30° (B) 0.05 N/mm² and 0° (C) 0.2 N/mm² and 0° (D) 0.05 N/mm² and 45°

Description : A cylindrical specimen of saturated soil failed under an axial vertical stress of 100kN/m² when it was laterally unconfmed. The failure plane was inclined to the horizontal plane at an angle of 45°. The values of cohesion and angle of ... N/mm² and 0° (C) 0.2 N/mm² and 0° (D) 0.05 N/mm² and 45°

Last Answer : Answer: Option B

A cylindrical rod of iron whose height is eight times its radius is melted and cast into spherical balls each of half the radius of the cylinder. -Maths 9th

Description : A cylindrical rod of iron whose height is eight times its radius is melted and cast into spherical balls each of half the radius of the cylinder. -Maths 9th

Last Answer : Let radius of iron rod = r ∴∴ Height = 8r ∴∴ Volume of iron rod =π×(r)2×8r⇒8πr3=π×(r)2×8r⇒8πr3 ⇒⇒ Radius of spherical ball =r2=r2 Volume of spherical ball =43π(r2)3=43π(r2)3 Let n balls are casted ∴n×43π(r38)=8πr3∴n×43π(r38)=8πr3 ⇒n6=8⇒n=48

A cylindrical rod of iron whose radius is one-fourth of its height is melted and cast into spherical balls of the same radius as that of the cylinder. -Maths 9th

Description : A cylindrical rod of iron whose radius is one-fourth of its height is melted and cast into spherical balls of the same radius as that of the cylinder. -Maths 9th

Last Answer : Let radius of cylindrical rod =r ⇒ height =4r Volume of cylindrical rod =πr2h =πr2(4r) =4πr3 Volume of spherical balls of radius r=34​πr3 No. of balls =34​πr34πr3​=

In a thick cylindrical shell subjected to an internal pressure (p), the radial stress across the thickness of a cylinder is a) maximum at the outer surface and minimum at the inner surface b) maximum at the inner surface and minimum at the outer surface c) maximum at the inner surface and zero at the outer surface d) maximum at the outer surface and zero at the inner surface

Description : In a thick cylindrical shell subjected to an internal pressure (p), the radial stress across the thickness of a cylinder is a) maximum at the outer surface and minimum at the inner surface b) maximum ... and zero at the outer surface d) maximum at the outer surface and zero at the inner surface

Last Answer : c) maximum at the inner surface and zero at the outer surface

Ignition timing of a multi-cylinder SI engine can be adjusted by A. rotating the cam shaft B. adjusting the generator pulley C. rotating the distributor D. adjusting the pump pulley

Description : Ignition timing of a multi-cylinder SI engine can be adjusted by A. rotating the cam shaft B. adjusting the generator pulley C. rotating the distributor D. adjusting the pump pulley

Last Answer : ANSWER : C

The coefficient of viscosity may be determined by (A) Capillary tube method (B) Orifice type viscometer (C) Rotating cylinder method (D) All of these

Description : The coefficient of viscosity may be determined by (A) Capillary tube method (B) Orifice type viscometer (C) Rotating cylinder method (D) All of these

Last Answer : Answer: Option D

______ is used for a shaft that supports rotating elements like wheels, drums or rope sleaves. a) Spindle b) Axle c) Shaf d) cylinder

Description : ______ is used for a shaft that supports rotating elements like wheels, drums or rope sleaves. a) Spindle b) Axle c) Shaf d) cylinder

Last Answer : a) Spindle

A threshing cylinder of 15cm radius is rotating at 700rpm if peripheral velocity (m/sec) will be a. 11 b.105 c. 210 d. 660

Description : A threshing cylinder of 15cm radius is rotating at 700rpm if peripheral velocity (m/sec) will be a. 11 b.105 c. 210 d. 660

Last Answer : a. 11

Why the electric motor of a fan with backward curved blades is never got overloaded under any condition ?

Description : Why the electric motor of a fan with backward curved blades is never got overloaded under any condition ?

Last Answer : The maximum power is consumed at about 70% of maximum flow in case’of fan with backward blades. For higher flow, power consumption gets lower.

Notched disc blades on disc harrows are provided to a) Enhance penetration b) Improve balancing of gangs c) Save on steel d) Reduce draft

Description : Notched disc blades on disc harrows are provided to a) Enhance penetration b) Improve balancing of gangs c) Save on steel d) Reduce draft

Last Answer : ans a

This type thresher consists of a flywheel with corrugation on its periphery and sides. Rims of flywheel fitted with chopping blades. b. Axial flow c. Dummy d. None of above

Description : This type thresher consists of a flywheel with corrugation on its periphery and sides. Rims of flywheel fitted with chopping blades. b. Axial flow c. Dummy d. None of above

Last Answer : Ans-    a. Syndicator

The following types of blades are used with the rotor in rotary tiller a. ‗L‘ type blade c) both A & B b. Twisted blade d) chisel plough

Description : The following types of blades are used with the rotor in rotary tiller a. ‗L‘ type blade c) both A & B b. Twisted blade d) chisel plough

Last Answer :  both A & B

it is a Cultivator with tines or blades mounted on a power driven horizontal shaft. A. Disc cultivator. C Rotary cultivator B. Tine cultivator. D Trailed type cultivator

Description : it is a Cultivator with tines or blades mounted on a power driven horizontal shaft. A. Disc cultivator. C Rotary cultivator B. Tine cultivator. D Trailed type cultivator

Last Answer : Rotary cultivator

harrow which consist of one or more blades attached to the beam Or frame, used for shallow working of the soil. A Spike tooth harrow B Acme harrow C Spring tooth harrow D Blade harrow

Description : harrow which consist of one or more blades attached to the beam Or frame, used for shallow working of the soil. A Spike tooth harrow B Acme harrow C Spring tooth harrow D Blade harrow

Last Answer : Blade harrow

A object moves with uniform positive acceleration. Its velocity-time graph will be (a) A straight line parallel to the time axis (b) A straight line inclined at an obtuse angle to the time axis (c) A straight line inclined at an acute angle to the time axis (d) None of these. -Science

Description : A object moves with uniform positive acceleration. Its velocity-time graph will be (a) A straight line parallel to the time axis (b) A straight line inclined at an obtuse angle to the time axis (c) A straight line inclined at an acute angle to the time axis (d) None of these. -Science

Last Answer : Answer is (c)

The locus of the moment of inertia about inclined axes to the principal axis, is (A) Straight line (B) Parabola (C) Circle (D) Ellipse

Description : The locus of the moment of inertia about inclined axes to the principal axis, is  (A) Straight line  (B) Parabola  (C) Circle  (D) Ellipse

Last Answer : (D) Ellipse

The locus of the end point of the resultant of the normal and tangential components of the stress on an inclined plane, is (A) Circle (B) Parabola (C) Ellipse (D) Straight line

Description : The locus of the end point of the resultant of the normal and tangential components of the stress  on an inclined plane, is  (A) Circle  (B) Parabola  (C) Ellipse  (D) Straight line 

Last Answer : (C) Ellipse 

Straight, parallel and widely spaced contours represent (A) A steep surface (B) A flat surface (C) An inclined plane surface (D) Curved surface

Description : Straight, parallel and widely spaced contours represent (A) A steep surface (B) A flat surface (C) An inclined plane surface (D) Curved surface

Last Answer : (C) An inclined plane surface

Terzaghi's analysis assumes: (A) Soil is homogeneous and isotropic (B) Elastic zone has straight boundaries inclined at = to the horizontal and plastic zones fully developed (C) Failure zones do not extend above the horizontal plane through the base of the footing (D) All the above

Description : Terzaghi's analysis assumes: (A) Soil is homogeneous and isotropic (B) Elastic zone has straight boundaries inclined at = to the horizontal and plastic zones fully developed (C) Failure zones do not extend above the horizontal plane through the base of the footing (D) All the above

Last Answer : Answer: Option D

The dew point temperature lines on psychrometric charts are straight inclined sloping downwards to the right. When relative humidity of moist air is 100%, then (A) Wet bulb temperature=dry bulb temperature (B) Wet bulb temperature=dew point temperature (C) Saturation temperature=dew point temperature (D) All 'a', 'b' & 'c

Description : The dew point temperature lines on psychrometric charts are straight inclined sloping downwards to the right. When relative humidity of moist air is 100%, then (A) Wet bulb temperature=dry bulb temperature (B) ... temperature (C) Saturation temperature=dew point temperature (D) All 'a', 'b' & 'c

Last Answer : Option D

On mollier chart ,free expansion or throttling process from High pressure to atmosphere is represented by • Horizontal straight line • Vertical straight line • Straight inclined line • Curved line

Description : On mollier chart ,free expansion or throttling process from High pressure to atmosphere is represented by • Horizontal straight line • Vertical straight line • Straight inclined line • Curved line

Last Answer : • Horizontal straight line

For any part of a beam subjected to uniformly distributed load, bending moment diagram is (a) Horizontal straight line (b) Vertical straight line (c) Line inclined to x-axis (d) Parabola

Description : For any part of a beam subjected to uniformly distributed load, bending moment diagram is (a) Horizontal straight line (b) Vertical straight line (c) Line inclined to x-axis (d) Parabola

Last Answer : d) Parabola

For any part of a beam subjected to uniformly distributed load, Shear force diagram is (a) Horizontal straight line (b) Vertical straight line (c) Line inclined to x-axis (d) Parabola

Description : For any part of a beam subjected to uniformly distributed load, Shear force diagram is (a) Horizontal straight line (b) Vertical straight line (c) Line inclined to x-axis (d) Parabola

Last Answer : (c) Line inclined to x-axis

For any part of a beam between two concentrated load, Bending moment diagram is a (a) Horizontal straight line (b) Vertical straight line (c) Line inclined to x-axis (d) Parabola

Description : For any part of a beam between two concentrated load, Bending moment diagram is a (a) Horizontal straight line (b) Vertical straight line (c) Line inclined to x-axis (d) Parabola

Last Answer : (c) Line inclined to x-axis

7-For any part of the beam, between two concentrated load Shear force diagram is a (a) Horizontal straight line (b) Vertical straight line (c) Line inclined to x-axis (d) Parabola

Description : 7-For any part of the beam, between two concentrated load Shear force diagram is a (a) Horizontal straight line (b) Vertical straight line (c) Line inclined to x-axis (d) Parabola

Last Answer : Na

The Lissajous pattern observed on screen of CRO is a straight line inclined at 45° to x axis. If X–plate input is

Description : The Lissajous pattern observed on screen of CRO is a straight line inclined at 45° to x axis. If X–plate input is 2 sin ωt, the Y–plate input is (1) 2 sin ωt (2) 2 sin (ωt + 45°) (3) 2 sin (ωt – 45°) (4) 22 sin ωt + 45°) 

Last Answer : The Lissajous pattern observed on screen of CRO is a straight line inclined at 45° to x axis. If X–plate input is 2 sin ωt, the Y–plate input is 2 sin ωt 

Three long, straight and parallel wires are arranged as shown in Fig. The forces experienced by 10 cm length of wire Q is

Description : Three long, straight and parallel wires are arranged as shown in Fig. The forces experienced by 10 cm length of wire Q is

Last Answer : Three long, straight and parallel wires are arranged as shown in Fig. The forces experienced by 10 cm length ... D. `2.6xx10^(-4)`N towards the left

Refers to a type of beam antenna which uses two or more straight elements arranged in line with each other. A. Dipole antenna B. Yagi antenna C. Whip antenna D. Rhombic antenna

Description : Refers to a type of beam antenna which uses two or more straight elements arranged in line with each other. A. Dipole antenna B. Yagi antenna C. Whip antenna D. Rhombic antenna

Last Answer : B. Yagi antenna

Which of the bearings given below SHOULD NOT be subjected to a thrust load? (a) Deep groove ball bearing (b) Angular contact ball bearing (c) Cylindrical (straight) roller bearing (d) Single row tapered roller bearing

Description : Which of the bearings given below SHOULD NOT be subjected to a thrust load? (a) Deep groove ball bearing (b) Angular contact ball bearing (c) Cylindrical (straight) roller bearing (d) Single row tapered roller bearing

Last Answer : (c) Cylindrical (straight) roller bearing

It is a machine to separate grains from the harvested crop and provide clean grain without much loss and damage. a. Weeder c. mower d. None of above

Description : It is a machine to separate grains from the harvested crop and provide clean grain without much loss and damage. a. Weeder c. mower d. None of above

Last Answer : Ans-                              b. thresher  

It is the link between the knife and crank wheel of the mower. a. connecting rod c. rod d. None of above

Description : It is the link between the knife and crank wheel of the mower. a. connecting rod c. rod d. None of above

Last Answer : Ans-                                     b. Pitman

Flail mower is a mower with high speed swinging knives, operating in a. horizontal plane c. Vertical plane d. None of above

Description : Flail mower is a mower with high speed swinging knives, operating in a. horizontal plane c. Vertical plane d. None of above

Last Answer : Ans-   b. either in the horizontal plane or in the vertical plane  

The conventional type of Mower consists of which of the following a) Wearing Plate b) Nozzle c) Air Chamber d) None of the above

Description : The conventional type of Mower consists of which of the following a) Wearing Plate b) Nozzle c) Air Chamber d) None of the above

Last Answer : Wearing Plate

is a common troubles in the operation of Mower. a) Knives get twisted. b) Knives get melted. c) Knives gets rusted. d) Knives gets break

Description : is a common troubles in the operation of Mower. a) Knives get twisted. b) Knives get melted. c) Knives gets rusted. d) Knives gets break

Last Answer : Knives gets break

is a machine to cut herbage crops and leave the them in swath. a) Wind rower b) Sickle mower c) Fail mower d) Gang mower

Description : is a machine to cut herbage crops and leave the them in swath. a) Wind rower b) Sickle mower c) Fail mower d) Gang mower

Last Answer : Sickle mower