Ans- b. either in the horizontal plane or in the vertical plane
Description : In a flail harvester, the cutting operation is performed by a) Horizontally rotating circular blades b) Vertically rotating circular blades c) Knives mounted on a horizontal shaft d) Knives mounted on a vertical shaft Ans. c
Last Answer : ans c
Description : is a common troubles in the operation of Mower. a) Knives get twisted. b) Knives get melted. c) Knives gets rusted. d) Knives gets break
Last Answer : Knives gets break
Description : The direction of projection for the range of a projectile to be maximum on an inclined plane having angle of inclination 30? to the horizontal, whould be a.45? with horizontal b.30? with vertical c.30? with horizontal d.60? with inclined plane e.45? with inclined plane
Last Answer : b. 30? with vertical
Description : 267 .Double knives movers offers advantage over conventional mower are a)Double knife are dynamically balanced b) They can be operated at higher forward speeds then conventional mower c)They produce more uniform stubble height d)All of the above
Last Answer : d)All of the above
Description : A mass of 5 kg moves on a smooth horizontal plane with a speed of 8 m/s attached to a fixed point on the plane by a string of length 4m. Tension in the string is a.785 b.80N c.392.4N d.None of the above e.Tapered bearing
Last Answer : b. 80N
Description : When a body moves round a fixed axis it will have a.A motion of rotation and translation b.A circular motion c.A rotary motion d.A translatory motion e.A swinging motion
Last Answer : b. A circular motion
Description : The periodic time of a body moving in Simple Harmonic Motion is a.Directly proportional to its angular velocity b.Directly proportional to the weight of the body c.Inversely proportional to ... d.Directly proportional to the momentum of swinging body e.Inversely proportional to the angular velocity
Last Answer : e. Inversely proportional to the angular velocity
Description : Which type of chest configuration is typical of the patient with COPD? a) Barrel chest Barrel chest results from fixation of the ribs in the inspiratory position. b) Pigeon chest Pigeon chest ... depression in the lower portion of the sternum and is associated with Mafan's syndrome or rickets.
Last Answer : a) Barrel chest “Barrel chest” results from fixation of the ribs in the inspiratory position.
Description : What is the name of the horizontal and the vertical lines drawn to determine the position of any point in the Cartesian plane? -Maths 9th
Last Answer : The name of horizontal and vertical lines drawn to determine the position of any point in the Cartesian plane is x-axis and y-axis respectively
Description : A light ray is incident on a plane mirror placed in a horizontal plane, making an angle of `30^(@)` with the vertical, then the angle between the refl
Last Answer : A light ray is incident on a plane mirror placed in a horizontal plane, making an angle of `30^(@)` with the vertical, ... @)` C. `90^(@)` D. `30^(@)`
Description : In order to get maximum radiation to all surrounding points in the horizontal plane, the antenna used is a A. vertical loop B. vertical quarter-wavelength rod C. array which includes parasitic elements D. a horizontal Hertz dipole
Last Answer : B. vertical quarter-wavelength rod
Description : A vertical loop antenna has a A. unidirectional radiation pattern in the horizontal plane B. unidirectional radiation pattern in the vertical plane C. omnidirectional radiation pattern in the horizontal plane D. a bidirectional radiation pattern in the horizontal plane
Last Answer : D. a bidirectional radiation pattern in the horizontal plane
Description : Which of the following antennas receive signals in the horizontal plane equality well from all directions? A. Horizontal Hertz antenna B. Vertical loop antenna C. Vertical Yagi antenna D. A vertical antenna which is a quarter-wavelength long
Last Answer : D. A vertical antenna which is a quarter-wavelength long
Description : Which antenna radiates an omnidirectional pattern in the horizontal plane with vertical polarization? A. Marconi antenna B. Discone antenna C. Horn antenna D. Helical antenna
Last Answer : A. Marconi antenna
Description : Which of the following antennas receives signals equally well from all directions in a horizontal plane? A. Hetz antenna B. Vertical Marconi antenna C. Yagi antenna D. Helical antenna
Last Answer : B. Vertical Marconi antenna
Description : The electric field lies in a plane parallel to the earth’s surface. A. Elliptical polarization B. Horizontal polarization C. Vertical polarization D. Circular polarization
Last Answer : B. Horizontal polarization
Description : The electric field lines in a plane perpendicular to the earth’s surface. A. Elliptical polarization B. Circular polarization C. Horizontal polarization D. Vertical polarization
Last Answer : D. Vertical polarization
Description : While rotating the theodolite in the horizontal plane, the bubble of the bubble tube takes up the same position in its tube, it indicates (A) The rotation axis is vertical (B) The trunnion ... (C) The line of collimation is perpendicular to vertical axis (D) None of the above
Last Answer : (A) The rotation axis is vertical
Description : The instrument which is used in plane tabling for obtaining horizontal and vertical distances directly without resorting to chaining, is known as (A) Plane alidade (B) Telescopic alidade (C) Clinometer (D) Tacheometer
Last Answer : (B) Telescopic alidade
Description : In a square beam loaded longitudinally, shear develops (A) On middle fibre along horizontal plane (B) On lower fibre along horizontal plane (C) On top fibre along vertical plane (D) Equally on each fibre along horizontal plane
Last Answer : (D) Equally on each fibre along horizontal plane (D) Equally on each fibre along horizontal plane
Description : In the triaxial compression test, the application of additional axial stress (i.e. deviator stress) on the soil specimen produces shear stress on (A) Horizontal plane only (B) Vertical plane only (C) Both horizontal and vertical planes (D) All planes except horizontal and vertical planes
Last Answer : (D) All planes except horizontal and vertical planes
Description : A cylindrical specimen of saturated soil failed under an axial vertical stress of 100kN/m² when it was laterally unconfmed. The failure plane was inclined to the horizontal plane at an angle of 45°. The values of cohesion and angle of ... N/mm² and 0° (C) 0.2 N/mm² and 0° (D) 0.05 N/mm² and 45°
Last Answer : Answer: Option B
Description : Rankine's theory of active earth pressure assumes (A) Soil mass is homogeneous, dry and cohesionless (B) Ground surface is a plane which may be horizontal or inclined (C) Back of the wall is vertical and smooth (D) All the above
Last Answer : Answer: Option D
Description : Pick up the correct statement from the following: (A) When the electric field oscillates in the direction of the electric vector, a plane polarised wave is formed (B) When the electric vector is ... right angles to the plane of incidence, horizontal polarization wave is formed (D) All of these
Description : The angle of repose of a soil is the maximum angle which the outer face of the soil mass makes (A) With the horizontal (B) With the vertical (C) With the perpendicular to the inclined plane of the soil (D) None of these
Last Answer : Answer: Option A
Description : The total pressure force on a plane area is equal to the area multiplied by the intensity of pressure at the Centroid, if (A) The area is horizontal (B) The area is vertical (C) The area is inclined (D) All of the above
Description : Consider the following pre-conditions for correct use of a theodolite: 1. The vertical axis need not be perpendicular to the plane of the plate level bubble. 2. The line of sight must be perpendicular to the horizontal axis. 3. The axis of ... ? (a) 1, 2, 3 & 4 (b) 2 only (c) 3 only (d) 1 & 4 only
Last Answer : (b) 2 only
Description : Contour interval on a map sheet denotes (a) Vertical distance of contour lines above the datum plane (b) Vertical distance between two successive contour lines (c) Slope distance between two successive contour lines (d) Horizontal distance between two successive contour lines
Last Answer : (b) Vertical distance between two successive contour lines
Description : On moving the feed line (q-line) from saturated liquid feed (vertical position) to saturated vapor feed (horizontal feed), if the slope of both the operating lines are to be increased, then it will result in (A) Greater degree of separation with a fixed number of trays (B) Increased reboiler load
Last Answer : (C) Increased reflux ratio
Description : The truss element can deform only in the a.vertical direction b.horizontal direction c.inclined direction d.axial direction
Last Answer : d.axial direction
Description : The necessary condition of equilibrium of a body is a.The algebraic sum of horizontal components of all forces must be zero b.The algebraic sum of vertical components of all forces must be zero c.The algebraic sum of forces about a point must be zero d.All the above e.None of the above
Last Answer : d. All the above
Description : The moment of a force is a.Equivalent to the algebraic sum of the moments acting on a body b.Equivalent to the sum of horizontal as well as vertical components of the moments on a body c.Equivalent ... of the moments on a body e.Equivalent to the vertical sum of the moments acting on a body
Last Answer : a. Equivalent to the algebraic sum of the moments acting on a body
Description : Working width of disc plough can be increased by a) Disc angle b) Gang angle c) Vertical suction d) Horizontal clearance Ans. a
Last Answer : ans a
Description : The adjustment in MB plough for increasing the depth of operation a) Vertical suction b) Horizontal suction c) Gang angle d) Disc angle Ans. a
Description : A metering mechanism that does not required cut-off device is: A. Inclined plate B. Vertical plate C. Horizontal plate D. All are correct
Last Answer : All are correct
Description : The work done in sliding a block of weight of 50 kg up a plane inclined at an angle of 30? to the horizontal so that the block is lifted through 1 m ( a.More than 50 kgm b.50 kgm c.Less than 5 kgm d.15 kgm only e.None of the above
Last Answer : a. More than 50 kgm
Description : A plane is inclinea at angle ? to horizontal. If a body can just rest on a plane, determine the least force to draw the body up the plance a.W sin2? b.2 W cos2? c.107 dynes d.W cos2? e.2 W sin2?
Last Answer : a. W sin2?
Description : A body of weight W is resting at a plane inclined at 30? to the horizontal. It is attached to a string making an angle of 60? with horizontal. If the angle of friction be 30? the tension in the string would be a.Zero b.W c.W/2 d.2W e.None of the above
Last Answer : c. W/2
Description : A body of weight 100 kg is placed on a horizontal plane. A horizontal force of 30 kg is applied and the block is just on the point of motion. The angle of friction is a.About 16? b.30? c.45? d.60? e.None of the above
Last Answer : a. About 16?
Description : A particle moves along a rough plane inclined at 30? to the horizontal. The co-efficient of friction between the particle and the plane is 0.1. Its initial velocity is 15 m/sec. The ratio of the velocity of the particle when it move ... be in the regions a.8 ? 10 b.5 ? 7 c.2 ? 3 d.4 ? 6 e.10 ? 13
Last Answer : b. 5 ? 7
Description : The coefficient of friction is a.The tangent of the angle between the normal reaction and direction of limiting friction b.The tangent of the angle between the normal reaction and the resultant ... e.The angle between the normal reaction and the resultant of normal reaction and the limiting friction
Last Answer : a. The tangent of the angle between the normal reaction and direction of limiting friction
Description : enght of cutter bar for the tractor operated mower or vertical conveyor reaper is..... (a) 1.5-3.0m (b) 3.0-4.5m (c)4.5-5.5m (d) >5.5m
Last Answer : (a) 1.5-3.0m
Description : harrow having curved knives. i. Spring tooth harrow. c) Acme harrow ii. Spikal tooth d) Spike tooth harrow
Last Answer : Acme harrow
Description : Play in bearings and worn knife head holders caused due to in cutter bar. A) Pitman B) Breaking of knives. C) Knife head. D) Grass board.
Last Answer : Breaking of knives.
Description : What aircraft deviation is measured by an ILS localizer? A. Altitude B. Ground speed C. Vertical D. Horizontal
Last Answer : D. Horizontal
Description : The frame consists of a steel beam welded rigidly to two vertical channels. An eccentric exciter weighing 250 N is attached to the beam, which weighs 10 KN and is used to excite the frame. The unbalance weight of ... ends, magnification factor at resonance is A. 307.5 B. 3.075 C. 30.75 D. 0.3075
Last Answer : C. 30.75
Description : Design of horizontal and vertical alignments, super-elevation, sight distance and grades, is worst affected by (A) Width of the vehicle (B) Length of the vehicle (C) Height of the vehicle (D) Speed of the vehicle
Description : It is a machine to separate grains from the harvested crop and provide clean grain without much loss and damage. a. Weeder c. mower d. None of above
Last Answer : Ans- b. thresher
Description : A mower knife is said to be in proper registration when the knife section stops in the ……………..of its guard ( fingers ) on every stroke a. offset c. inclined d. None of above
Last Answer : <!-- [if !supportLists] -->a. <!-- [endif] -->Ans- b. centre
Description : It is the link between the knife and crank wheel of the mower. a. connecting rod c. rod d. None of above
Last Answer : Ans- b. Pitman