Whenever an activity has zero total float, then (A) Free float of the activity must be zero but independent float need not be zero (B) Independent float must be zero but free float need not be zero (C) Free float and independent float both must be zero (D) Free float and independent float both need not be zero

Whenever an activity has zero total float, then
(A) Free float of the activity must be zero but independent float need not be zero
(B) Independent float must be zero but free float need not be zero
(C) Free float and independent float both must be zero
(D) Free float and independent float both need not be zero
by

1 Answer

Answer :

(C) Free float and independent float both must be zero
by

Related questions

The time by which a particular activity can be delayed without affecting the preceding and succeeding activities is known as (A) Total float (B) Free float (C) Interfering float (D) Independent float

Description : The time by which a particular activity can be delayed without affecting the preceding and succeeding activities is known as (A) Total float (B) Free float (C) Interfering float (D) Independent float

Last Answer : (D) Independent float

Additional time which a non-critical activity can consume without increasing the project duration is called _____________. A. Total Float. B. Free Float C. Independent Float. D. Dependant Float

Description : Additional time which a non-critical activity can consume without increasing the project duration is called _____________. A. Total Float. B. Free Float C. Independent Float. D. Dependant Float

Last Answer : A. Total Float.

Consider the following statements: In the critical path method of construction planning, Free Float can be. 1. Greater than Total Float. 2. Greater than Independent Float 3. Equal to Total Float. 4. Less than Independent Float. Of these statements (A) 1 and 4 are correct (B) 2 and 3 are correct (C) 1 and 4 are correct (D) 1 and 2 are correct

Description : Consider the following statements: In the critical path method of construction planning, Free Float can be. 1. Greater than Total Float. 2. Greater than Independent Float 3. Equal to Total Float. 4. Less than ... (B) 2 and 3 are correct (C) 1 and 4 are correct (D) 1 and 2 are correct

Last Answer : (B) 2 and 3 are correct

Interfering float is the difference between (A) Total float and free float (B) Total float and independent float (C) Free float and independent float (D) None of the above

Description : Interfering float is the difference between (A) Total float and free float (B) Total float and independent float (C) Free float and independent float (D) None of the above

Last Answer : (A) Total float and free float

The independent float affects only (A) Preceding activities (B) Succeeding activities (C) The particular activity involved (D) None of the above

Description : The independent float affects only (A) Preceding activities (B) Succeeding activities (C) The particular activity involved (D) None of the above

Last Answer : (C) The particular activity involved

Pick up the correct statement from the following: (A) The duration between the earliest start time of the preceding event and latest finish time of the succeeding event, is called 'float' (B) The duration of time by which an activity can be delayed without affecting the succeeding activity, is called free float (C) The difference between total float and free float, is called interfering float (D) All the above

Description : Pick up the correct statement from the following: (A) The duration between the earliest start time of the preceding event and latest finish time of the succeeding event, is called 'float' (B) ... C) The difference between total float and free float, is called interfering float (D) All the above

Last Answer : (D) All the above

The time by which activity completion time can be delayed without affecting the start of succeeding activities, is known as (A) Duration (B) Total float (C) Free float (D) Interfering float

Description : The time by which activity completion time can be delayed without affecting the start of succeeding activities, is known as (A) Duration (B) Total float (C) Free float (D) Interfering float

Last Answer : (C) Free float

Free float is mainly used to (A) Identify the activities which can be delayed without affecting the total float of preceding activity (B) Identify the activities, which can be delayed without affecting the total float of succeeding activity (C) Establish priorities (D) Identify the activities which can be delayed without affecting the total float of either the preceding or succeeding activities

Description : Free float is mainly used to (A) Identify the activities which can be delayed without affecting the total float of preceding activity (B) Identify the activities, which can be delayed ... which can be delayed without affecting the total float of either the preceding or succeeding activities

Last Answer : (B) Identify the activities, which can be delayed without affecting the total float of succeeding activity

Select the incorrect statement. (A) Start float and finish float are always equal. (B) Total float can be either start float or finish float. (C) Start float and finish float need not be equal. (D) Start float and finish float are the differences between activity times and not event times.

Description : Select the incorrect statement. (A) Start float and finish float are always equal. (B) Total float can be either start float or finish float. (C) Start float and finish float need not be equal. (D) Start float and finish float are the differences between activity times and not event times.

Last Answer : (C) Start float and finish float need not be equal.

Pick up the incorrect statement from the following: (A) The difference between the earliest start time and latest finish time of any activity, is the maximum time available for the activity (B) The difference between the maximum time available for the job and actual time it consumes, is called total float (C) The difference between the latest start time and earliest start time of an activity, is called total float (D) None of thes

Description : Pick up the incorrect statement from the following: (A) The difference between the earliest start time and latest finish time of any activity, is the maximum time available for the activity (B) The ... start time and earliest start time of an activity, is called total float (D) None of thes

Last Answer : (D) None of these

Total float for any activity is defined as the difference between (A) Its latest finish time and earliest start time for its successor activity (B) Its latest start time and earliest start time (C) Its latest start time and earliest finish time (D) Its earliest finish time and earliest start time for its successor activity

Description : Total float for any activity is defined as the difference between (A) Its latest finish time and earliest start time for its successor activity (B) Its latest start time and earliest start ... earliest finish time (D) Its earliest finish time and earliest start time for its successor activity

Last Answer : (B) Its latest start time and earliest start time

Independent float is the amount of time by which: A. Start of the activity can be delayed without affecting the EST of subsequent activity B. reduces the float of subsequent activities C. completion of an activity can be delayed beyond EFT without affecting EST D. completion of an activity can be delayed beyond earliest possible finishing time

Description : Independent float is the amount of time by which:  A. Start of the activity can be delayed without affecting the EST of subsequent  activity  B. reduces the float of subsequent ... without affecting EST  D. completion of an activity can be delayed beyond earliest possible finishing time

Last Answer : A. Start of the activity can be delayed without affecting the EST of subsequent  activity

Critical path moves along the activities having total float as (a) Positive (b) Negative ( c) Zero (d) Unity

Description : Critical path moves along the activities having total float as (a) Positive (b) Negative ( c) Zero (d) Unity

Last Answer : ( c) Zero

The artificial activity which indicates that an activity following it, cannot be started unless the preceding activity is complete, is known as (A) Event (B) Free float (C) Dummy (D) Constrain

Description : The artificial activity which indicates that an activity following it, cannot be started unless the preceding activity is complete, is known as (A) Event (B) Free float (C) Dummy (D) Constrain

Last Answer : (C) Dummy

.......................... is the duration by which an activity can be delayed without delaying the project. a. Slack b. Total float c. Both a and b d. None of these

Description : .......................... is the duration by which an activity can be delayed without delaying the project. a. Slack b. Total float c. Both a and b d. None of these

Last Answer : b. Total float

Free float for any activity is defined as the difference between A. its earliest finish time and earliest start time for its successor activity B. its latest start time and earliest start time C. its latest finish time and earliest start time for its successor activity D. its earliest finish time and latest start time for its successor activity

Description : Free float for any activity is defined as the difference between A. its earliest finish time and earliest start time for its successor activity B. its latest start time and earliest start time ... its successor activity D. its earliest finish time and latest start time for its successor activity

Last Answer : A. its earliest finish time and earliest start time for its successor activity

Total float in a planning network is (a) Late start time – Early start time (b) Early start time – Late start time (c) Late start time – Late finish time (d) Late finish time – Early finish time

Description : Total float in a planning network is (a) Late start time – Early start time (b) Early start time – Late start time (c) Late start time – Late finish time (d) Late finish time – Early finish time

Last Answer : Ans: (a & d)

Whenever you give an order for tea in staff room, then you remember Options: A) Minimum expenses B) More members and lesser number of tea C) Health of the colleagues D) The total number of people

Description : Whenever you give an order for tea in staff room, then you remember Options: A) Minimum expenses B) More members and lesser number of tea C) Health of the colleagues D) The total number of people

Last Answer : C) Health of the colleagues

Is it fair if we must fall in line first whenever there's a need to use the comfort room, especially in malls?

Description : Is it fair if we must fall in line first whenever there's a need to use the comfort room, especially in malls?

Last Answer : Fairness is following the rules which is first come first serve. This is the practice in developed countries. And this applies to all public facilities including convenience in malls. The best way to ... no way overtakes you, you will feel bad, but in emergency cases it is totally understandable.

The project schedule is used to determine all of the following except which one? A. Cost estimates B. Activity start dates C. Float times D. Activity end dates

Description : The project schedule is used to determine all of the following except which one?  A. Cost estimates B. Activity start dates C. Float times D. Activity end dates

Last Answer : A. Cost estimates

two forces acting at a joint are not along the straight line, then for the equilibrium of the joint (A) One of the forces must be zero (B) Each force must be zero (C) Forces must be equal and of the same sign (D) Forces must be equal in magnitude but opposite in sign

Description : two forces acting at a joint are not along the straight line, then for the equilibrium of the joint (A) One of the forces must be zero (B) Each force must be zero (C) Forces must be equal and of the same sign (D) Forces must be equal in magnitude but opposite in sign

Last Answer : (B) Each force must be zero

A sample of metal weighs 219 gms in air, 180 gms in water, 120 gms in an unknown fluid. Then which is correct statement about density of metal (A) Density of metal can't be determined (B) Metal is twice as dense as water (C) Metal will float in water (D) Metal is twice as dense as unknown fluid

Description : A sample of metal weighs 219 gms in air, 180 gms in water, 120 gms in an unknown fluid. Then  which is correct statement about density of metal  (A) Density of metal can't be determined  (B) ... as water  (C) Metal will float in water  (D) Metal is twice as dense as unknown fluid 

Last Answer : (A) Density of metal can't be determined 

Ice float on water because its density is (1) more than water (2) less than water (3) zero (4) same as water

Description : Ice float on water because its density is (1) more than water (2) less than water (3) zero (4) same as water

Last Answer : (2) less than water Explanation: Archimedes' Principle states that for an object to floaton water, it must displace an equal amount of water. Ice floats because it is about 9% less dense than liquid water.

In the illustration, the tan and white wires are connected to the solenoid valve. The solinoid valve is_________. EL-0043 A. in the liquid line before the TXV B. energized and open whenever the unit is plugged in C. not grounded so the unit must be modified before using aboard ship D. the water inlet for the ice maker

Description : In the illustration, the tan and white wires are connected to the solenoid valve. The solinoid valve is_________. EL-0043 A. in the liquid line before the TXV B. energized and open whenever the unit ... so the unit must be modified before using aboard ship D. the water inlet for the ice maker

Last Answer : Answer: D

In the illustration, the tan and white wires are connected to the solenoid valve. The solenoid valve is_________. EL-0042 A. in the liquid line before the TXV B. energized and open whenever the unit is plugged in C. not grounded so the unit must be modified before using aboard ship D. the water inlet for the ice maker

Description : In the illustration, the tan and white wires are connected to the solenoid valve. The solenoid valve is_________. EL-0042 A. in the liquid line before the TXV B. energized and open whenever the unit ... so the unit must be modified before using aboard ship D. the water inlet for the ice maker

Last Answer : Answer: D

Select the correct statement about combining antihypertensive drugs: A. Antihypertensive combinations should always be preferred over single drugs B. Combinations of antihypertensives with similar pattern of haemodynamic action are superior to those with dissimilar pattern C. Antihypertensives which act on different regulatory systems maintaining blood pressure should be combined D. A diuretic must be included whenever antihypertensives are combined

Description : Select the correct statement about combining antihypertensive drugs: A. Antihypertensive combinations should always be preferred over single drugs B. Combinations of antihypertensives with similar ... should be combined D. A diuretic must be included whenever antihypertensives are combined

Last Answer : C. Antihypertensives which act on different regulatory systems maintaining blood pressure should be combined

If a variable is declared final, it must include ...................... value. A) integer B) no C) initial D) float

Description : If a variable is declared final, it must include ...................... value. A) integer B) no C) initial D) float

Last Answer : C) initial

While solving an assignment problem, an activity is assigned to a resource through a square with zero opportunity cost because the objective is to a. Minimize total cost of assignment b. Reduce the cost of assignment to zero c. Reduce the cost of that particular assignment to zero d. All of the above

Description : While solving an assignment problem, an activity is assigned to a resource through a square with zero opportunity cost because the objective is to a. Minimize total cost of assignment b. Reduce the cost of ... to zero c. Reduce the cost of that particular assignment to zero d. All of the above

Last Answer : c. Reduce the cost of that particular assignment to zero

01. Whenever a plate is held immersed at some angle with the direction of flow of the liquid, it is subjected to some pressure. The component of this pressure, at right angles to the direction of flow of the liquid is known as lift. A) True B) False

Description : 01. Whenever a plate is held immersed at some angle with the direction of flow of the liquid, it is subjected to some pressure. The component of this pressure, at right angles to the direction of flow of the liquid is known as lift. A) True B) False

Last Answer : A

Whenever a plate is held immersed at some angle with the direction of flow of the liquid, it is subjected to some pressure. The component of this pressure, in the direction of flow of the liquid, is known as (A) Lift (B) Drag (C) Stagnation pressure (D) Bulk modulus

Description : Whenever a plate is held immersed at some angle with the direction of flow of the liquid, it is subjected to some pressure. The component of this pressure, in the direction of flow of the liquid, is known as (A) Lift (B) Drag (C) Stagnation pressure (D) Bulk modulus

Last Answer : Answer: Option B

A single lane carriage way whenever changes to two-lane carriage way, is affected through a taper of (A) 1 in 10 (B) 1 in 15 (C) 1 in 20 (D) 1 in 15 to 1 in 20

Description : A single lane carriage way whenever changes to two-lane carriage way, is affected through a taper of (A) 1 in 10 (B) 1 in 15 (C) 1 in 20 (D) 1 in 15 to 1 in 20

Last Answer : Answer: Option D

If ωmax is the frequency at which the peak amplitude occurs and ωn is the natural frequency of the system then In a forced vibration system with damping, the higher the damping, A) More will be the difference between ωn and ωmax B) Less will be the difference between ωn and ωmax C) The difference of ωn and ωmax is independent of damping in this system D) The difference between ωn and ωmax will be zero

Description : If ωmax is the frequency at which the peak amplitude occurs and ωn is the natural frequency of the system then In a forced vibration system with damping, the higher the damping, A) More will be ... and ωmax is independent of damping in this system D) The difference between ωn and ωmax will be zero

Last Answer : A) More will be the difference between ωn and ωmax

Symon's rain gauge is (A) Tipping-bucket gauge (B) Weighing type gauge (C) Float recording gauge (D) Non-recording gauge

Description : Symon's rain gauge is (A) Tipping-bucket gauge (B) Weighing type gauge (C) Float recording gauge (D) Non-recording gauge

Last Answer : Answer: Option D

The best instrument for measuring the velocity of a stream flow is (A) Pitot tube (B) Price's current meter (C) Surface float (D) Sub-surface float

Description : The best instrument for measuring the velocity of a stream flow is (A) Pitot tube (B) Price's current meter (C) Surface float (D) Sub-surface float

Last Answer : Answer: Option B

In India the recording type rain gauge generally used, is (A) Weighing type (B) Tipping type (C) Float recording type (D) None of these

Description : In India the recording type rain gauge generally used, is (A) Weighing type (B) Tipping type (C) Float recording type (D) None of these

Last Answer : Answer: Option C

The body will float if the force of buoyancy is __________ the weight of the liquid displaced. (A) Equal to (B) Less than (C) More than (D) None of these

Description : The body will float if the force of buoyancy is __________ the weight of the liquid displaced. (A) Equal to (B) Less than (C) More than (D) None of these

Last Answer : Answer: Option C

When a body is placed over a liquid, it will float if (A) Gravitational force is equal to the up-thrust of the liquid (B) Gravitational force is less than the up-thrust of the liquid (C) Gravitational force is more than the up-thrust of the liquid (D) None of the above

Description : When a body is placed over a liquid, it will float if (A) Gravitational force is equal to the up-thrust of the liquid (B) Gravitational force is less than the up-thrust of the liquid (C) Gravitational force is more than the up-thrust of the liquid (D) None of the above

Last Answer : Answer: Option B

A piece of metal of specific gravity 13.6 is placed in mercury of specific gravity 13.6, what fraction of it volume is under mercury? (A) The metal piece will simply float over the mercury (B) The metal piece will be immersed in mercury by half (C) Whole of the metal piece will be immersed with its top surface just at mercury level (D) Metal piece will sink to the bottom

Description : A piece of metal of specific gravity 13.6 is placed in mercury of specific gravity 13.6, what fraction of it volume is under mercury? (A) The metal piece will simply float over the mercury (B ... will be immersed with its top surface just at mercury level (D) Metal piece will sink to the bottom

Last Answer : Answer: Option C

The difference between the time avail-to do a job and the time required to do the job, is known as (A) Event (B) Float (C) Duration (D) Constraint

Description : The difference between the time avail-to do a job and the time required to do the job, is known as (A) Event (B) Float (C) Duration (D) Constraint

Last Answer : (B) Float

The ratio of the length to breadth of a wooden float, is (A) 4.5 (B) 5.5 (C) 6.5 (D) 7.5

Description : The ratio of the length to breadth of a wooden float, is (A) 4.5 (B) 5.5 (C) 6.5 (D) 7.5

Last Answer : (D) 7.5

Cement is said to be of good quality if (A) Its colour is not greenish grey (B) One feels cool by thrusting one's hand in the cement bag (C) A handful of cement thrown into a bucket of water does not float (D) None of these

Description : Cement is said to be of good quality if (A) Its colour is not greenish grey (B) One feels cool by thrusting one's hand in the cement bag (C) A handful of cement thrown into a bucket of water does not float (D) None of these

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Roasting is not necessary if iron ore is an oxide (B) Impurities float on the molten iron as slag (C) The slag contains lime about 45% (D) All the above

Description : Pick up the correct statement from the following: (A) Roasting is not necessary if iron ore is an oxide (B) Impurities float on the molten iron as slag (C) The slag contains lime about 45% (D) All the above

Last Answer : Answer: Option D

A stilling well is required when the stage measurement is made by employing : a) Bubble gauge b) Float gauge recorder c) Vertical staff gauge d) Inclined staff gauge

Description : A stilling well is required when the stage measurement is made by employing : a) Bubble gauge b) Float gauge recorder c) Vertical staff gauge d) Inclined staff gauge

Last Answer : b) Float gauge recorder

A number of forces acting at a point will be in equilibrium if (A) Their total sum is zero (B) Two resolved parts in two directions at right angles are equal (C) Sum of resolved parts in any two perpendicular directions are both zero (D) All of them are inclined equally

Description : A number of forces acting at a point will be in equilibrium if (A) Their total sum is zero (B) Two resolved parts in two directions at right angles are equal (C) Sum of resolved parts in any two perpendicular directions are both zero (D) All of them are inclined equally

Last Answer : (C) Sum of resolved parts in any two perpendicular directions are both zero

Do you have an idea why my VW Jetta 1.8 L Turbo car blows out a cloud of blue smoke whenever I take a sharp corner or on-ramp? It lasts about 10 seconds, then stops smoking!

Description : Do you have an idea why my VW Jetta 1.8 L Turbo car blows out a cloud of blue smoke whenever I take a sharp corner or on-ramp? It lasts about 10 seconds, then stops smoking!

Last Answer : If the oil cap is not missing or loose I would venture to guess you have a bad seal. Can you see the source? Is it dripping when parked? Oil seals really require a mechanic to properly fix. (Unless you have a good torque wrench and do not mind getting really dirty.)

If a patient gives history of urticaria, itching and swelling of lips following injection of penicillin G, then (a) He will develop similar reaction whenever penicillin is injected (b) He can be given ampicillin safely (c) He can be given oral phenoxymethyl penicillin safely (d) All natural and semisynthetic penicillins are contraindicated for him

Description : If a patient gives history of urticaria, itching and swelling of lips following injection of penicillin G, then (a) He will develop similar reaction whenever penicillin is injected ( ... oral phenoxymethyl penicillin safely (d) All natural and semisynthetic penicillins are contraindicated for him

Last Answer : Ans: D

If a patient gives history of urticaria, itching and swelling of lips following injection of penicillin G, then: A. He will develop similar reaction whenever penicillin is injected B. He can be given ampicillin safely C. He can be given oral phenoxymethyl penicillin safely D. All natural and semisynthetic penicillins are contraindicated for him

Description : If a patient gives history of urticaria, itching and swelling of lips following injection of penicillin G, then: A. He will develop similar reaction whenever penicillin is injected ... oral phenoxymethyl penicillin safely D. All natural and semisynthetic penicillins are contraindicated for him

Last Answer : D. All natural and semisynthetic penicillins are contraindicated for him

Whenever a wave is incident on a perfect conductor then the reflection coefficient is

Last Answer : Whenever a wave is incident on a perfect conductor then the reflection coefficient is 0.

In the given circuit, it is observed that the current I is independent of the value of the resistance `R_6`. Then the resistance values must satisfy .

Description : In the given circuit, it is observed that the current I is independent of the value of the resistance `R_6`. Then the resistance values must satisfy .

Last Answer : In the given circuit, it is observed that the current I is independent of the value of the resistance `R_6`. Then the ... R_(3)=R_(2)R_(4)=R_(5)R_(6)`

Benthoic animals are those, which (a) are submerged in area (b) float on the sea surface(c) are deep dweller in sea (d) are floating (free) organisms.

Description : Benthoic animals are those, which (a) are submerged in area (b) float on the sea surface (c) are deep dweller in sea (d) are floating (free) organisms.

Last Answer : (c) are deep dweller in sea