The weakest section of a diamond riveting, is the section which passes through (A) First row (B) Second row (C) Central row (D) One rivet hole of end row

The weakest section of a diamond riveting, is the section which passes through 

(A) First row 

(B) Second row 

(C) Central row 

(D) One rivet hole of end row 

by

1 Answer

Answer :

(A) First row

by

Related questions

If the rivets in adjacent rows are staggered and outermost row has only one rivet, the arrangement of the rivets, is called (A) Chain riveting (B) Zig-zag riveting (C) Diamond riveting (D) None of these

Description : If the rivets in adjacent rows are staggered and outermost row has only one rivet, the arrangement of the rivets, is called (A) Chain riveting (B) Zig-zag riveting (C) Diamond riveting (D) None of these

Last Answer : (C) Diamond riveting

What is Rivet and Riveting?

Description : What is Rivet and Riveting?

Last Answer : A rivet is a small, cylindrical and smooth shaft whose one end is swollen (called Head) while the other end is flat. Hot rivets are used to join the metal plates. The process in which two metal plates are joined together by means of rivets is called riveting.

If b is the width of a plate joined by diamond riveting of diameter d, the efficiency of the joint is given by (A) (b + d)/b (B) (b - d)/b (C) (d - b)/d (D) (b - d)/d

Description : If b is the width of a plate joined by diamond riveting of diameter d, the efficiency of the joint is  given by  (A) (b + d)/b (B) (b - d)/b (C) (d - b)/d (D) (b - d)/d

Last Answer : (B) (b - d)/b

Failure of riveted joints is due to (A) Tearing of the plates between the rivet hole and the edge of the plate (B) Tearing of plates between rivets (C) Shearing of rivets (D) All the above

Description : Failure of riveted joints is due to  (A) Tearing of the plates between the rivet hole and the edge of the plate  (B) Tearing of plates between rivets  (C) Shearing of rivets  (D) All the above 

Last Answer : (D) All the above 

What's a riveting read for travel through central and eastern Europe?

Description : What's a riveting read for travel through central and eastern Europe?

Last Answer : answer:I can't think of anything more riveting than books on the geography, culture, and history of the places you'll be travelling through, and then collecting local books on the same subjects as you ... through to buy the T-shirt or the cuckoo clock souvenir just to prove you got of the bus.

The diameter of hole for 20 dia rivet shall be a) 23 mm b) 18 mm c) 21.5 mm* d) 22 mm

Description : The diameter of hole for 20 dia rivet shall be a) 23 mm b) 18 mm c) 21.5 mm* d) 22 mm

Last Answer : c) 21.5 mm*

The spectral region of the electromagnetic radiation which passes through the atmosphere without much attenuation is known as: (A) Ozone hole (B) Atmospheric window (C) Ozone window (D) Black hole

Description : The spectral region of the electromagnetic radiation which passes through the atmosphere without much attenuation is known as: (A) Ozone hole (B) Atmospheric window (C) Ozone window (D) Black hole

Last Answer : Answer: Option B

Pick up the incorrect statement (A) The cross-sectional area of the welded member is effective (B) A welded joint develops strength of its parent metal (C) Welded joints provide rigidity (D) Welding takes more time than riveting

Description : Pick up the incorrect statement (A) The cross-sectional area of the welded member is effective (B) A welded joint develops strength of its parent metal (C) Welded joints provide rigidity (D) Welding takes more time than riveting

Last Answer : (D) Welding takes more time than riveting

In a beam, the neutral plane (A) May be its centre (B) Passes through the C.G. of the area of cross-section (C) Does not change during deformation (D) None of these

Description : In a beam, the neutral plane  (A) May be its centre  (B) Passes through the C.G. of the area of cross-section  (C) Does not change during deformation  (D) None of these 

Last Answer : (C) Does not change during deformation

Assertion A: Intervention of undulations in the sea bed reduces the depth of wave at the section. Reason R: No wave can have a height greater than the depth of water through which it passes Select your answer based on the coding system given below: (A) Both A and R is true and R is correct explanation of A (B) Both A and R is true but R is not the correct explanation of A (C) A is true but R is false (D) A is false but R is true

Description : Assertion A: Intervention of undulations in the sea bed reduces the depth of wave at the section. Reason R: No wave can have a height greater than the depth of water through which it passes Select your answer based on ... of A (C) A is true but R is false (D) A is false but R is true

Last Answer : (A) Both A and R is true and R is correct explanation of A

Renewal of loose rivet shall be taken up in end bearing stiffener when the % of hammer loose rivet is

Description : Renewal of loose rivet shall be taken up in end bearing stiffener when the % of hammer loose rivet is

Last Answer : 30%

According to Unwin's formula, the diameter of a rivet of plate of thickness is : (A) d = 6.05 t (B) d = 1.5 t + 4 (C) d = t(D) d = t + 1.5

Description : According to Unwin's formula, the diameter of a rivet of plate of thickness is :  (A) d = 6.05 t (B) d = 1.5 t + 4  (C) d = t (D) d = t + 1.5 

Last Answer : (A) d = 6.05 t

In case of an eccentric loading on a bracket subjected to moment M, the tangential force developed in any rivet, at right angles to its radius vector r is (A) Mr/ r² (B) r²/Mr(C) Mr²/ r² (D) Mr/ r²

Description : In case of an eccentric loading on a bracket subjected to moment M, the tangential force  developed in any rivet, at right angles to its radius vector r is  (A) Mr/ r²  (B) r²/Mr (C) Mr²/ r²  (D) Mr/ r² 

Last Answer : (A) Mr/ r² 

As a 10 kilogram mass on the end of a spring passes through its equilibrium position, the kinetic energy of the mass is 20 joules. The speed of the mass is: w) 2.0 meters per second x) 4.0 meters per second y) 5.0 meters per second z) 6.3 meters per second

Description : As a 10 kilogram mass on the end of a spring passes through its equilibrium position, the kinetic energy of the mass is 20 joules. The speed of the mass is: w) 2.0 meters per second x) 4.0 meters per second y) 5.0 meters per second z) 6.3 meters per second

Last Answer : ANSWER: W -- 2.0 METERS PER SECOND

In a bar of large length when held vertically and subjected to a load at its lower end, its own￾weight produces additional stress. The maximum stress will be (A) At the lower cross-section (B) At the built-in upper cross-section (C) At the central cross-section (D) At every point of the bar

Description : In a bar of large length when held vertically and subjected to a load at its lower end, its own￾weight produces additional stress. The maximum stress will be (A) At the lower cross-section (B) At the built-in upper cross-section (C) At the central cross-section (D) At every point of the bar

Last Answer : (B) At the built-in upper cross-section

Three playing cards in a row. Can you name them with these clues? There is a two to the right of a king. A diamond will be found to the left of a spade. An ace is to the left of a heart. A heart is to the left of a spade. Now, identify all three cards. -Riddles

Description : Three playing cards in a row. Can you name them with these clues? There is a two to the right of a king. A diamond will be found to the left of a spade. An ace is to the left of a heart. A heart is to the left of a spade. Now, identify all three cards. -Riddles

Last Answer : Ace of Diamonds, King of Hearts, Two of Spades.

Process of welding with respect to riveting takes a. More time b. Less time c. Same time d. None

Description : Process of welding with respect to riveting takes a. More time b. Less time c. Same time d. None

Last Answer : b. Less time

Thickness of plate is required more in welding than in riveting. a) True b) False

Description : Thickness of plate is required more in welding than in riveting. a) True b) False

Last Answer : b) False

In cold riveting like hot riveting shank is subjected to majorly tensile stress. a) True b) False

Description : In cold riveting like hot riveting shank is subjected to majorly tensile stress. a) True b) False

Last Answer : b) False

Cold riveting holds the connected parts better than hot riveting. a) True b) False

Description : Cold riveting holds the connected parts better than hot riveting. a) True b) False

Last Answer : b) False

Holes for riveting purposes should be preferably made by (A) Cutting torch (B) Drilling (C) Punching (D) None of these

Description : Holes for riveting purposes should be preferably made by (A) Cutting torch (B) Drilling (C) Punching (D) None of these

Last Answer : (B) Drilling

Out of the following, the joint produced by __________ has the lowest strength. (A) Soldering (B) Welding (C) Brazing (D) Riveting

Description : Out of the following, the joint produced by __________ has the lowest strength. (A) Soldering (B) Welding (C) Brazing (D) Riveting

Last Answer : (A) Soldering

Which of the following is preferred for riveting? (A) Lap joint (B) Butt joint (C) Either (A) or (B) (D) Neither (A) nor (B)

Description : Which of the following is preferred for riveting? (A) Lap joint (B) Butt joint (C) Either (A) or (B) (D) Neither (A) nor (B)

Last Answer : (B) Butt joint

What is riveting?

Description : What is riveting? A. Making permanent joints B. making temp joints C. soldering method D. None of these 

Last Answer : riveting is Making permanent joints.

name the central hollow prtion in vertebrae through which the spinal cord passes.

Description : name the central hollow prtion in vertebrae through which the spinal cord passes.

Last Answer : name the central hollow prtion in vertebrae through which the spinal cord passes.

In our country, the Tropic of Cancer passes through the (a) Central part (b) Northern part (c) Southern part (d) Western part

Description : In our country, the Tropic of Cancer passes through the (a) Central part (b) Northern part (c) Southern part (d) Western part

Last Answer : Ans: (a)

Which of the following is correct about Star Topology: a) Data on a star network passes through the hub, swithc or concentrator before continuing to its destination. b) The hub, switch or concentrator manages and controls all functions of the network c) The star topology reduces the chance of network failure by connecting all of the systems to a central node. d) All of Above e) None of These

Description : Which of the following is correct about Star Topology: a) Data on a star network passes through the hub, swithc or concentrator before continuing to its destination. b) The hub, switch or concentrator manages and ... connecting all of the systems to a central node. d) All of Above e) None of These

Last Answer : d) All of Above

What types of industry use blind rivet equipment?

Description : What types of industry use blind rivet equipment?

Last Answer : Most types of manufacturing industries, such as chemical and car manufacturers, use blind rivet equipment. Blind rivet equipment is used in industries that make items where rivet joints can only be accessed from one side, such as plastic piping and some aircraft parts.

Diameter of the rivet to be provided on a 20 mm. thick boiler plate will be __________ mm. (A) 10 (B) 20 (C) 30 (D) 40

Description : Diameter of the rivet to be provided on a 20 mm. thick boiler plate will be __________ mm. (A) 10 (B) 20 (C) 30 (D) 40

Last Answer : (D) 40

The expected efficiency of a single riveted lap joint is of the order of 50%. If the thickness of the plate is increased four times, then the rivet diameter will have to be increased __________ times. (A) Two (B) Four (C) Six (D) Eight

Description : The expected efficiency of a single riveted lap joint is of the order of 50%. If the thickness of the plate is increased four times, then the rivet diameter will have to be increased __________ times. (A) Two (B) Four (C) Six (D) Eight

Last Answer : Option A

Strength of a rivet is a. Strength in shear b. Strength in crushing c. Strength in tension d. None

Description : Strength of a rivet is a. Strength in shear b. Strength in crushing c. Strength in tension d. None

Last Answer : d. None

The weight of rivet testing hammer is

Description : The weight of rivet testing hammer is

Last Answer : 110 gm

Rebound hammer is used for a) To find the strength of concrete* b) To form rivet heads c) To break the concrete structures d) None of the above

Description : Rebound hammer is used for a) To find the strength of concrete* b) To form rivet heads c) To break the concrete structures d) None of the above

Last Answer : a) To find the strength of concrete*

The length of the countersunk head rivet shank is, when L = length of the rivet, G = length of grip in mm; D = Dia of rivet in mm a) L =G +0.5 D + 1mm for every 4 mm of grip or part thereof * b) b) L =G +0.5 D + 1mm c) L =G +0.5 D d) None of the above

Description : The length of the countersunk head rivet shank is, when L = length of the rivet, G = length of grip in mm; D = Dia of rivet in mm a) L =G +0.5 D + 1mm for every 4 mm of grip or part thereof * b) b) L =G +0.5 D + 1mm c) L =G +0.5 D d) None of the above

Last Answer : a) L =G +0.5 D + 1mm for every 4 mm of grip or part thereof *

he length of the snap head rivet shank is, when L = length of the rivet, G = length of grip in mm; D = Dia of rivet in mm a) L =G +1.5 D + 1mm for every 4 mm of grip or part thereof * b) b) L =G +0.5 D + 1mm c) L =G +0.5 D d) None of the above

Description : he length of the snap head rivet shank is, when L = length of the rivet, G = length of grip in mm; D = Dia of rivet in mm a) L =G +1.5 D + 1mm for every 4 mm of grip or part thereof * b) b) L =G +0.5 D + 1mm c) L =G +0.5 D d) None of the above

Last Answer : a) L =G +1.5 D + 1mm for every 4 mm of grip or part thereof *

There are 100 light bulbs lined up in a row in a long room. Each bulb has its own switch and is currently switched off. The room has an entry door and an exit door. There are 100 people lined up outside the entry door. Each bulb is numbered consecutively from 1 to 100. So is each person. Person No. 1 enters the room, switches on every bulb, and exits. Person No. 2 enters and flips the switch on every second bulb (turning off bulbs 2, 4, 6, ...). Person No. 3 enters and flips the switch on every third bulb (changing the state on bulbs 3, 6, 9, ...). This continues until all 100 people have passed through the room. What is the final state of bulb No. 64? And how many of the light bulbs are illuminated after the 100th person has passed through the room? -Riddles

Description : There are 100 light bulbs lined up in a row in a long room. Each bulb has its own switch and is currently switched off. The room has an entry door and an exit door. There are 100 people ... And how many of the light bulbs are illuminated after the 100th person has passed through the room? -Riddles

Last Answer : First think who will operate each bulb, obviously person #2 will do all the even numbers, and say person #10 will operate all the bulbs that end in a zero. So who would operate for example bulb 48: Persons numbered: 1 & 48 ... 100 (1, 4, 9, 16, 25, 36, 49, 64, 81 & 100) hence 10 bulbs remain on.

In case of end to end connection of two or more pipes in series, the __________ each pipe.(A) Same rate of flow passes through (B) Head loss is same through (C) Rate of flow in each pipe is proportional to the length of (D) Total flow rate is the sum of flow rate in

Description : In case of end to end connection of two or more pipes in series, the __________ each pipe. (A) Same rate of flow passes through (B) Head loss is same through (C) Rate of flow in each pipe is proportional to the length of (D) Total flow rate is the sum of flow rate in

Last Answer : (A) Same rate of flow passes through

it is a harrow with peg shaped teeth of diamond cross section to a Rectangular frame. A) Spike tooth harrow C Spring tooth harrow B) Acme harrow D Triangular harrow.

Description : it is a harrow with peg shaped teeth of diamond cross section to a Rectangular frame. A) Spike tooth harrow C Spring tooth harrow B) Acme harrow D Triangular harrow.

Last Answer : Spike tooth harrow

In case of a simply supported I-section beam of span L and loaded with a central load W, the length of elasto-plastic zone of the plastic hinge, is (A) L/2 (B) L/3 (C) L/4 (D) L/5

Description : In case of a simply supported I-section beam of span L and loaded with a central load W, the  length of elasto-plastic zone of the plastic hinge, is  (A) L/2  (B) L/3  (C) L/4  (D) L/5 

Last Answer : (D) L/5 

The M.I. of hollow circular section about a central axis perpendicular to section as compared to its M.I. about horizontal axis is (A) Same (B) Double (C) Half (D) Four times

Description : The M.I. of hollow circular section about a central axis perpendicular to section as compared to its M.I. about horizontal axis is (A) Same (B) Double (C) Half (D) Four times

Last Answer : (B) Double

0 Pick up the correct statement from the following: (A) The point through which the resultant of the shear stresses passes is known as shear centre(B) In the standard rolled channels, the shear centre is on the horizontal line passing through and away from the C.G. beyond web (C) In equal angles, the shear centre is on the horizontal plane and away from the C.G., outside of the leg projection (D) All the above

Description : 0 Pick up the correct statement from the following: (A) The point through which the resultant of the shear stresses passes is known as shear centre (B) In the standard rolled channels, the shear centre ... horizontal plane and away from the C.G., outside of the leg projection (D) All the above

Last Answer : (D) All the above

Coulomb's wedge theory assumes that (A) Back fill is dry, cohesionless, homogeneous and isotropic (B) Slip surface is the plane which passes through the heel of the wall (C) Position and direction of the resultant earth pressure are known (D) All the above

Description : Coulomb's wedge theory assumes that (A) Back fill is dry, cohesionless, homogeneous and isotropic (B) Slip surface is the plane which passes through the heel of the wall (C) Position and direction of the resultant earth pressure are known (D) All the above

Last Answer : (D) All the above

Choose the wrong statement (A) The horizontal component of the hydrostatic force on any surface is equal to the normal force on the vertical projection of the surface (B) The horizontal component acts through the center of pressure for the vertical projection (C) The vertical component of the hydrostatic force on any surface is equal to the weight of the volume of the liquid above the area (D) The vertical component passes through the center of pressure of the volume

Description : Choose the wrong statement (A) The horizontal component of the hydrostatic force on any surface is equal to the normal force on the vertical projection of the surface (B) The horizontal component ... above the area (D) The vertical component passes through the center of pressure of the volume

Last Answer : Answer: Option D

An aggregate which passes through 25 mm I.S. sieve and is retained on 20 mm sieve, is said to be flaky if its least dimension is less than (A) 22.5 mm (B) 18.5 mm (C) 16.5 mm (D) 13.5 m

Description : An aggregate which passes through 25 mm I.S. sieve and is retained on 20 mm sieve, is said to be flaky if its least dimension is less than (A) 22.5 mm (B) 18.5 mm (C) 16.5 mm (D) 13.5 mm

Last Answer : Answer: Option D

The yield line ultimate moment is obtained when the yield line is --------------- to the direction of the reinforcement [ A ] Parallel [ B ] At right angles. [ C ] Passes through [ D ] Crosses at an angle of 45°

Description : The yield line ultimate moment is obtained when the yield line is --------------- to the direction of the reinforcement [ A ] Parallel [ B ] At right angles. [ C ] Passes through [ D ] Crosses at an angle of 45°

Last Answer : [ B ] At right angles.

What would you say are your strongest attributes as an employee/worker, and what are your weakest areas (your disadvantages) as a worker?

Description : What would you say are your strongest attributes as an employee/worker, and what are your weakest areas (your disadvantages) as a worker?

Last Answer : answer:I work really well alone, and most times can get the job done. My weakest point is holding my temper when the boss is an idiot.

Where is the weakest link in modern computing nowadays?

Description : Where is the weakest link in modern computing nowadays?

Last Answer : answer:Well, it depends what aspect you are talking about, graphics, memory, processing, honestly the biggest overall bottleneck I would say is the internet, the speed at which we can transfer data, ... 100gb/s upload/download everywhere, research would be able to take pace at a much faster rate.

A chain is only as strong as its weakest link?

Description : A chain is only as strong as its weakest link?

Last Answer : If all links were the exact same strength and the force enacted on them was also the same then when the chain’s tensil strength is exceeded they would all fail at the same time.