Explain the factors to be considered while designing a lighting scheme.

2 Answers

Answer :

Following factors to be considered while designing a lighting scheme

1. Design of illumination scheme should be very simple. 2. Area of the working plane. 3. Find out application of working plane 4. Decided lux level on working plane as per application.(Illumination level) 5. Find out total lumens required on working plane. 6. Decide the type and wattage of lamp which is to be used for that particular application 7. Quality of light 8. Assume waste light Factor 9. Assume utilization Factor 10. Assume deprecation Factor 11. The illumination scheme is designed in such a way that there should be fewer glares. 12. The illumination scheme is designed in such a way that there should be minimum shadows. 13. The control of light intensity is possible. 14. Assume the illumination efficiency of those specific lamps which are to be used. 15. Provide safety and prevent accident. 16. Take care to achieve desired energy saving. 17. Choose lamp with higher luminous efficiency, better color, and longer life 18. For any type of illumination scheme the maintenance & repairing should be less. 19. The cost of the designed illumination scheme should be low

Answer :

.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Related questions

Description : What parameters or technical particulars are important to be considered while designing protection scheme of the transformer?

Last Answer : 1.Network Diagram showing the position of the transformer in the system 2.kVA or MVA rating of the transformer 3.Fault Level at the transformer 4.Voltage Ratio 5.Winding Connections 6.Per Unit ... Oil Filled 11.Length and area of cross section of the connecting leads between CTs and Relay Panel

Description : State any factors to be considered while selecting electrical welding system.

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Description : State the factors to be considered for selection of shape and size of the car of elevator.

Last Answer : The size and shape of elevator car depends on following factors:  i) No. of passenger to be carried: While selecting the size of car it is a usual practice to allow. A Space of 2 Sq. ... of elevator depends on space available in building.  iii) Type of building  iv) Application of elevator

Description : What factors to be considered while designing compressor housing?

Last Answer : Answer: Operation, Maintenance, Climate conditions, Safety, Economics.

Description : Following factors are to be considered while designing a distributor

Last Answer : 1. While designing the distributor voltage drop calculation is important. 2. Voltage drop in distribution system should be maintained within permissible limit (  6%). 3. Layout should ... 14. Fault on nearest distribution system should not affect stability of existing distribution system. 

Description : factors to be considered while designing feeders ? 

Last Answer : Following factors are to be considered while designing the Feeder:  1) Current carrying capacity of conductor:- Conductor should have high current carrying capacity. While voltage drop consideration is ... time consuming.  5) Power Factor of load should be consider while designing

Description : Explain the lighting scheme to be designed for each of the following: i) Special ward in hospitals ii) Dentist’s Cabin 

Last Answer : i) Special ward in hospital: For the patients in the wards, lighting should create a cozy and pleasant atmosphere. Lighting in the wards should be planned in such a way that it meets the specific ... we use such as cements and bonding agents that we use to restore your teeth back to health.

Description : Explain the factors affecting framing of tariffs.

Last Answer : Factors affecting framing of tariffs:- 1. Total recovery of all taxes , duties and other charges 2. Expenses on premium (installment) paid to insurance company. 3. T&D losses. 4. Electricity cannot ... L.F. 12. The tariff should be simple cheap and capable of easy explanation to consumers. 

Description : Explain the term aseptic techniques. What are the various points to be considered while designing an aseptic room?

Last Answer : Definition: The method which is used to prevent the access of microorganism during the preparation of parenteral product and their testing are called aseptic Technique . Design of aseptic room: 1. Site: ... connection. Vacuum. Disposable waste. 6. Furniture: Shack type. Fume -cupboard.

Description : Explain with neat diagram construction and working of Ajax Wyatt vertical core induction furnace.

Last Answer : Neat sketch of Ajax Wyatt' vertical core furnace: Construction of Ajax Wyatt' vertical core furnace: Vertical core type induction heating furnace is nothing but transformer. It consists of ... is utilized to melt the charge. Where, R = Resistance of charge & I secondary current.

Description : Explain the requirements of elevator motor. State with reason best suitable motor for elevator.

Last Answer : Ideal requirements of elevator motor: 1. High starting torque along with high rate of acceleration and retardation. 2. Motors are compact in size especially smaller in diameter. 3. Speed of motor should not exceed 900 ... 4. Permanent magnet AC Motor. 5. Split Phase AC I.M. 6. Capacitor Start I.M.

Description : Explain the suitability of 3-phase induction motor for traction service. 

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Description : Explain with the diagram butt welding. State its applications. 

Last Answer : Diagram butt welding:-  Explanation: Transformer used for welding is designed for low voltage and high current secondary. Transformer is oil cooled The job is clamped as shown in fig. two parts which ... : 1) For welding rod, wire, pipe etc 2) For joining thick metal plates or bars at end

Description : Explain regenerative braking for D.C. series motor.

Last Answer : Schematic diagram of regenerative braking of D.C. series :-  Explanation of regenerative braking: During normal running, motors are connected in parallel with field winding in series ... For final stop mechanical braking is applied. External Resistances are connected to limit the current.

Description : Define load equalisation for electric motors. Explain how it is obtained for electric motors.

Last Answer : Define load equalization for electric Motor: There are many types of load which are fluctuating in nature e.g. wood cutting m/c, Rolling mill. Etc. For such type of loads, load equalization is ... increases so cost of cable increases, Hence it is necessary to smooth out load fluctuations on motor.

Description : What factors go into designing the vapor space of kettle type reboiler?

Last Answer : The size of the kettle is determined by several factors. One factor is to provide enough space to slow the vapor velocity down enough for nearly all the liquid droplets to fall back down by ... is typically 8 inches. It is higher for high heat flux kettles. Source: Gulley Computer Associates

Description : State any six factors on which efficiency of lighting depends.

Last Answer : 1) Level of illumination or degree of illumination: It depends on nature of work to be carried out. The degree of level of illumination also depends on following factors. i) The size of ... Distribution of lux on working plane: The lux level on working plane should be uniformly distributed.

Description : What organizational requirement need to be considered when designing and formatting the layout of a document?

Last Answer : Need answer

Description : What features should be considered in designing a user interface for a knowledge anagement system?

Last Answer : Design the better business layer and next think about designing the user interface for a knowledge management system

Description : Are there any general rules that should be considered when designing a slurry piping system? The following are items to consider when designing a piping system that will transport slurries:

Last Answer : 1) Whenever possible, piping should be designed to be self-draining 2) Manual draining should be installed to drain sections of the piping when self-draining is not possible 3) Blow-out or ... flanges should be provided every 20 feet of horizontal pipe or after every two changes in direction

Description : Factors which affect the performance of learner system does not include? a) Representation scheme used b) Training scenario c) Type of feedback d) Good data structures

Last Answer : d) Good data structures

Description : Which of the factors affect the performance of learner system does not include? a) Representation scheme used b) Training scenario c) Type of feedback d) Good data structures

Last Answer : d) Good data structures

Description : Factors which affect the performance of learner system does not include a) Representation scheme used b) Training scenario c) Type of feedback d) Good data structures

Last Answer : d) Good data structures

Description : Applications of Dielectric Heating

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Description : Differentiate between core type and core less induction furnace.

Last Answer : Sr.No. Core type induction furnace. Core less induction furnace. 1 Less leakage flux  More leakage flux 2 Power factor is good Power factor is poor 3 ... normal frequency is used. Due to high frequency, high voltage supply, time required for heating is less.

Description :  Justify the use of saturable reactor to control the magnitude of welding current.

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Description : State four advantages of seam welding over spot welding.

Last Answer : Advantages of seam welding over spot welding:- 1. Due to seam welding we get continuous weld which is air-tight 2. Gas tight as well as liquid tight joints can be made. 3. The Overlap is ... . The production of single seam weld and parallel seams can be got simultaneously. 5. Efficient energy use.

Description : State desirable properties of heating elements used in indirect resistance heating. 

Last Answer : Following properties of good heating material in indirect resistance heating:- 1. High resistivity: It should have high resistivity. So that it becomes compact in size and produces more heat with small ... , it should have low temperature co-efficient of resistance. 10.It should not be brittle.

Description : State its types electrical braking.

Last Answer : Types of Electrical Braking: Electrical braking system: 1. Plugging 2. Rheostatic (Dynamic) Braking 3. Regenerative Braking 4. Electromagnetic Braking 5. Eddy current braking

Description : State any four desirable characteristics of ideal traction motor. State the names of different traction motor used.

Last Answer : Desirable characteristics of ideal traction motors:-  A) Mechanical Properties or characteristics: 1) It should be robust in construction to withstand against continuous vibrations. 2) Weight of motor per HP ... AC series motor 3. 3-Ph, Slip-ring induction motor 4. Linear induction motor (LIM)

Description : State two advantages of P.F. tariff and TOD tariff for the power system concern

Last Answer : time of day tariff:_ In time of day tariff structure incentives for power draw during peak off hours & extra charges for power draw during peak hours are built in. advantages:- 1. TOD tariff encourage ... advantages:-  1. kva rating of equipment reduces 2.due to high p.f less electricity bill.

Description : State the four requirements of Tariff. 

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Description : State disadvantages of low power factor.

Last Answer : Due to low power factor The load draws high current. High cu losses. Efficiency decreases. Voltage regulation increases Temperature increases May break down  the insulation.

Description : Give classification of electrical welding.

Last Answer : i) Resistance Welding:- 1) Spot welding 2) Seam welding 3) Projection Welding 4) Butt Welding- i) Simple butt welding ii) Flash butt welding  ii) Arc welding:- 1) Carbon Arc Welding: a) shielded welding b) unshielded welding 2) Metal Arc Welding: a) shielded welding b) unshielded welding

Description : Why noise of motor is produced? How it can be reduced?

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Description : Compare individual and group drive on any four points.  

Last Answer : S.No. Point Individual Drive Group Drive 1 Definition In this type of drive each machine has its own separate electric drive (motor). It may be directly coupled ... Lathe Machine (Similar application will be consider) Textile Industry (Similar application will be consider)

Description : State eight requirements of an ideal traction system.

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Description : Compare between Resistance welding and Arc welding on any six points.

Last Answer : Sr.No Parameters Resistance Welding Arc Welding 1 Type of welding Plastic/Pressure/Non-fusion welding Fusion/Non pressure welding 2 Principle of heat developed Heat ... It is suitable for mass production It is suitable for heavy job, maintenance and repair work

Description : State the four causes of low (poor) power factor.

Last Answer : Following are the Causes of low power factor: - 1. Magnitude of Magnetizing Current :- As magnetizing current increases, power factor reduces. 2. Due to use of Induction Motor:- Most of industrial ... and maintenance:- P.f. falls if proper maintenance or repairs of equipments are not done. 

Description : State any two applications of each for the following types of electrical heating : (i) Direct resistance heating(ii) Indirect induction heating (iii) Direct.arc heating (iv) Dielectric heating

Last Answer : (i) Direct resistance heating:- 1. This type of heating used for industrial purpose 2. Salt bath heating: This utilized for the purpose of carbonizing, tempering, quenching and hardening of steel tools 3. ... purpose. 14)In foundry for heating of sand, core, which are used in molding processes.

Description : Describe with neat sketch operation of seam type resistance welding.

Last Answer : 1) Seam Welding its neat labelled sketch:  Explanation: Seam welding is nothing but series of continuous spot welding Working: Job is kept in between two electrodes under ... reached supply is cut down and external pressure is applied simultaneously across the job to complete weld.  

Description :  Describe the construction of high pressure mercury vapour lamp with neat sketch

Last Answer : Construction:-  It consists of an inner bulb generally of silicon, to withstand high temperatures. The bulb contains a small quantity of mercury and argon. It is protected by outer glass, this ... : The function of power factor improvement capacitor is to improve the power factor 0.5 to 0.95

Description : Write eight desirable characteristics of traction motor.

Last Answer : Desirable characteristics of ideal traction motors:- 1) It should be robust in construction to withstand against continuous vibrations. 2) Weight of motor per HP should be minimum in order to increase pay ... maintenance cost. 17) It should have high efficiency. 18) It should have long life.

Description : Draw a neat labelled block diagram of AC electric locomotive. State the function of each part.

Last Answer : labelled diagram ofAC electric locomotive:  Function of AC electric locomotive Parts: 1) Overhead contact wire: Supply of 1-ph, 25KV, 50Hz, AC is given to overhead conductor. 2) Current collecting ... mechanical power to run the train i.e. DC series motor which is used as traction motor.

Description : "DC series motor is used for traction purpose." Justify your answer with any six characteristics.

Last Answer : Due To Following Reasons DC Series Motor Is Used For Traction Purpose:- 1. DC Series motor robust in construction and capable to withstand against continuous vibration. 2. DC series motor weight is 1. ... . 12. Torque obtained by DC series motor is smooth and uniform, so it improves riding quality

Description : Compare DC and AC welding on any four points.

Last Answer : Points DC Welding AC Welding Supply equipment used  DC differential Compound Generator, or Rectifier Welding Transformer Heating Effect Uniform Not Uniform Temperature Obtain ... High, 85% Application Carbon Arc Welding Resistance Welding , Metal Arc Welding

Description : Compare Single phase 25 kV AC and 1500 V DC track electrification.

Last Answer : Points Single phase 25 kV AC track Electrification 1500 V DC track electrification Supply given to O/H condition 1-ph, 25KV, AC 50 Hz  600/750V-Tromways 1500/3000V urban/suburban ... track distance Less More Applications Main line services Urban and suburban area

Description : Advantages eddy current heating

Last Answer : 1) No heat transfer loss as heat is produced in job itself. So it has high efficiency. 2) As heat is produced in job itself so time required for heating is less. For e.g. in some ... or other special atmospheric condition where other methods are not possible. 9) It is clean and convenient method.

Description :  State any eight advantages of electric heating.

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }