Explain the term aseptic techniques. What are the various points to be considered while designing an aseptic room?

Explain the term aseptic techniques. What are the various points to be considered while designing an aseptic room?
by

1 Answer

Answer :

Definition: The method which is used to prevent the access of microorganism during the preparation of parenteral product and their testing are called “aseptic Technique”.

Design of aseptic room:

1. Site:

 Away from stairs, lift and corridor.

 Best site is one where is no disturb.

2. Size:

 Depend on maximum no of people work.

2. Window:

 Glass panes should be used.

 Ventilation is provided by laminar air flow.

3. Door:

 Air lock with double door system.

4. Surface material:

 The floor, wall and bench tops of an aseptic room must be smooth, resistant to chemical and easily cleanable.

 The floor should be built with terrazzo, linoleum and plastics.

 Wall should be provided with tiles or coated with hard glass paint or smooth plaster or covered with plastic laminates board.

5. Services:

 Ventilation.

 Electricity.

 Gas connection.

 Vacuum.

 Disposable waste.

6. Furniture:

 Shack type.

 Fume –cupboard.
by

Related questions

Define aseptic techniques. What are the various sources of contamination?

Description : Define aseptic techniques. What are the various sources of contamination?

Last Answer : Definition: Aseptic technique  The method which is used to prevent the access of microorganism during the preparation of parenteral product and their testing are called Aseptic Technique Sources of ... are also a source of contamination. A handkerchief is the richest source of contamination. 

What is aseptic technique? List the various sources of contamination and explain the sterility test.

Description : What is aseptic technique? List the various sources of contamination and explain the sterility test.

Last Answer : Aseptic technique:  The method which is used to prevent the access of microorganism during the preparation of parenteral product and their testing are called Aseptic Technique . Sources of contamination: 1) ... the sample is declared to have pass the test and same test is repeated for two times.

Give any four precautions to be taken during aseptic work.

Description : Give any four precautions to be taken during aseptic work.

Last Answer : i. Self hygiene: avoid coughing, sneezing.  ii. Avoid contamination of products.  iii. Cover the whole body by Wear complete body suit up to foot.  iv. Wear hand gloves.  v. Allow minimum persons to work in aseptic area.  vi. Don’t touch unnecessarily.

What is aseptic technique? State its importance.

Description : What is aseptic technique? State its importance.

Last Answer : Definition: Aseptic technique  The method which is used to prevent the access of microorganism during the preparation of parenteral product and their testing are called Aseptic Technique . Importance ... be maintained. 7. It helps to maintain required environment for testing of sterile products.

Define microencapsulation.What are its advantages and different techniques involved in it?

Description : Define microencapsulation.What are its advantages and different techniques involved in it?

Last Answer : Microencapsulation : it is the technique in which a thin coating is applied on the particles of solids, liquids, resulting in the formation of micro-capsules ranging from micron to ... 4) Electrostatic Deposition 5) Vacuum deposition 6) Polymerization 7) Multiorific Centrifugal Process.

What are various ‘ Novel drug delivery systems’- explain implants.

Description : What are various ‘ Novel drug delivery systems’- explain implants. 

Last Answer : Various drug delivery systems are:  1. Implants 2. Liposome drug carriers 3. Nanoparticles 4. Prodrugs 5. Films and strips 6. Erythrocytes Implants: The hypodermic tablets are placed under the ... placed in the upper thigh at a depth of 5 mm. These implants are useful in hormone therapy.

List the various equipment’s used for liquid mixing and explain how vortex formation can be avoided in liquid mixing.

Description : List the various equipment’s used for liquid mixing and explain how vortex formation can be avoided in liquid mixing. 

Last Answer : Equipment used for mixing of liquid:  1. Propeller mixture. 2. Turbine Mixture. 3. Paddle mixture. Vortex formation can be avoided in liquid mixing by making the following changes in the position of the ... the side of vessels. 4. Using push pull propeller. 5. Using baffles.

Explain various grades of powders

Description : Explain various grades of powders

Last Answer : According to IP 2010 official grades of powders are as follows:  i. Coarse powder: A powder of which all particles pass through sieve no 10 with nominal aperture size 1.7mm and not more than 40% pass ... powder: A powder of which not less than 90%by weight of particles are less than 10 µm in size.

Describe in detail various oral cavity tablet.

Description : Describe in detail various oral cavity tablet.

Last Answer : Oral cavity tablet:  i. Buccal Tablet. ii. Sublingual Tablet. iii. Lozenge tablet and tracheas. iv. Dental cones. 1] Buccal Tablet's - a. These tablets are to be placed in buccal pouch or ... Chloride or it may be amines acid. f. These cones generally get dissolved in 20 to 40 min time.

Describe various factors affecting size reduction.

Description : Describe various factors affecting size reduction.

Last Answer : i. Hardness: Soft material easy break than hard. ii. Toughness: Drug with fibrous nature or those having high moisture content are tough and hard to reduce in size. iii. Stickiness: Material ... of the size reduction of the material in a machine depends upon the bulk density of the substance.

Name various types of closures.

Description : Name various types of closures.

Last Answer : i. Plug type. ii. Crown type. iii. Push-fit cap. iv. Screw closure

Name various mechanisms of size reduction.

Description : Name various mechanisms of size reduction.

Last Answer : i. Cutting ii. Compression iii. Impact iv. Attrition v. Combined impact and attrition

Draw a well labelled diagram of ‘Soxhlet apparatus.’ Mention the various limitations of continuous hot percolation process.

Description : Draw a well labelled diagram of ‘Soxhlet apparatus.’ Mention the various limitations of continuous hot percolation process. 

Last Answer : Limitation: 1. Physical character of the drug: If the drug would block the soxhlet apparatus then this process cannot be used for extraction. Eg opium. Gum, resin, ... for drugs having thermolabile active constituents such as enzymes, alkaloids, anthraquinone derivatives, esters, etc. 

Differentiate between filtration and clarification. Enlist various filter media used in Pharmacy.

Description : Differentiate between filtration and clarification. Enlist various filter media used in Pharmacy.

Last Answer : Sr. no. Filtration Clarification 1 It is process of removal of solids or suspended matter in a liquid or gas by passing through a porous medium in which solids are retained. ... wool iv) Asbestos v) Fine muslin vi) Filter cloth vii) Membrane filters viii) Sintered glass filters.

Name the various manufacturing defects in tablets.

Description : Name the various manufacturing defects in tablets. 

Last Answer : 1.Capping: In this there is partial or complete removal of top or bottom portion of tablet. Reasons: Excessive fine. Defective punch die. High speed of machine. Granules too dried ... ejection of tablet and give second impression. This can be controlled by managing the movement of punch.

Name the various standards of sieves.

Description : Name the various standards of sieves.

Last Answer : According to I.P. standards for sieves are as follows I .Approximate sieve number ii. Nominal mesh aperture size iii. Approximate percentage of sieving area iv. Tolerance average aperture size  According to I.P. sieves must confirm the above mentioned specifications for the given sieve number. 

What are the various factors which affect the size reduction of the drugs?

Description : What are the various factors which affect the size reduction of the drugs?

Last Answer : 1. Hardness: Soft material easy break than hard.  2. Toughness: Drug with fibrous nature or those having high moisture content are tough and hard to reduce in size.  3. Stickiness: Material ... of the size reduction of the material in a machine depends upon the bulk density of the substance. 

In which year various editions of pharmacopoeia of India came out?

Description : In which year various editions of pharmacopoeia of India came out?

Last Answer : 1. First Edition in 1955 2. Second Edition in 1966 3. Third Edition in 1985 4. Fourth Edition in 1996 5. Fifth Edition in 2007 6. Sixth Edition in 2010 7. Seventh Edition 2014

Define tables. Enlist various excipients used in tablet manufacturing with one example each.

Description : Define tables. Enlist various excipients used in tablet manufacturing with one example each.

Last Answer : Definition:  Tablet is a solid unit dosage form congaing medicament/s usually circular in shape and may be flat or biconvex. OR Tablet is a solid unit dosage form prepared by compression. ... Glidants& lubricants: e.g. talc and magnesium stearate. vi. Colours, flavours and sweetening agents: 

Name various Novel drug Delivery systems.

Description : Name various Novel drug Delivery systems.

Last Answer : 1. Implants 2. Liposome drug carriers 3. Nanoparticles 4. Prodrugs 5. Films and strips 6. Resealed Erythrocytes etc.

Describe various stages of sugar coating.

Description : Describe various stages of sugar coating. 

Last Answer : Steps of sugar coating of tablet:-  i) Sieving ii) Sealing iii) Sub-coating iv) Syrup coating v) Finishing vi) Polishing i) Sieving :- The tablets to be coated are shaken in a suitable ... so the wax coated tablets are rubbed on the canvas cloth. This gives a proper shining to the tablets

Class 100 area is referred to (A) Manufacturing area (B) Aseptic area (C) Clean room (D) Ware house

Description : Class 100 area is referred to (A) Manufacturing area (B) Aseptic area (C) Clean room (D) Ware house

Last Answer : (B) Aseptic area

Explain the term ‘Immunological products’. Discuss any one vaccine in brief.

Description : Explain the term ‘Immunological products’. Discuss any one vaccine in brief. 

Last Answer : Immunological Product: These are the preparations which are meant for the prevention of diseases, such as vaccines or for treatment of diseases. Immunological Products: A. Active immunization: ... (TAF) iii. Adsorbing an aluminium hydroxide (PTAH) or hydrate aluminium phosphate (PTAP).

Explain the term ‘Aseptic technique’

Description : Explain the term ‘Aseptic technique’

Last Answer : Definition: The method which is used to prevent the access of microorganism during the preparation of parenteral product and their testing are called Aseptic Technique  The entry of the ... supplied under positive pressure  Ultra violet lamps are fitted in the area to maintain sterility

List the precautions to be taken while using hot air oven.

Description : List the precautions to be taken while using hot air oven.

Last Answer : 1. Glass apparatus and equipment should be wrapped individually. 2. Articles should be placed in such away that they should not interfere with air flow 3. Once in operation oven should not be open ... substance should never be sterilized in hot air oven. 6. It should never be over loaded.

Write the precautions to be taken while placing the material in hot air oven

Description : Write the precautions to be taken while placing the material in hot air oven

Last Answer : 1. It should be filled to its capacity only should not be overloaded. 2. Glass apparatus and equipment should be wrapped individually. 3. Articles should be placed in such a way that ... Proper biological indicators should be used 7. Thermolabile substance should not be sterilized in hot air oven

Mention precautions to be taken while using of eye drop.

Description : Mention precautions to be taken while using of eye drop. 

Last Answer : Do not touch the tip of the dropper. Never rinse the dropper. Never use eye drop that have changed colour. After instillation of drop, do not close eyes tightly or blink more than usual. Discard the content after one month of use.  

Define The term Clarification. Write the working of filter candle with neat diagram.

Description : Define The term Clarification. Write the working of filter candle with neat diagram.

Last Answer : Clarification:-  When solids are present in a very small proportion i.e. not exceeding 1.0 % the process of its separation from liquid, is called clarification. Working :-   1) These are ... the candle & gets collected inside the candle from where it is removed. Diagram :

Define the term “phagocytosis and antibodies”.

Description : Define the term “phagocytosis and antibodies”.

Last Answer : Phagocytosis is the process of ingestion of bacteria by certain cells of the body ,which make them harmless.  Antibodies are immunoglobulin produced mainly in the body in response to the presence of foreign proteins and certain other material in tissues(antigens).

Define the term “Pharmacopoeia.”

Description : Define the term “Pharmacopoeia.” 

Last Answer : Pharmacopoeia: Pharmakon means a drug and poein means to make . Pharmacopoeia is defined as a compressive book which is issued under the authority of government and contains a list of drug ... with description and the tests for those substances and the standards to which they must confirm.

Define the term ‘Closures’. Write in detail about different types of closures commonly used in pharmaceutical industry.

Description : Define the term ‘Closures’. Write in detail about different types of closures commonly used in pharmaceutical industry.

Last Answer : CLOSURES are devices by means of which containers can be opened and closed. TYPES OF CLOSURES WITH EXAMPLES: 1. Plug type - It is a push-fit into the neck of the container. E.g. cork ... and paper impregnated with a suitable resin, wax or plastic. E.g. Caps of pharmaceutical liquid dosage forms.

What does the term ‘Desiccation’’ mean?

Description : What does the term ‘Desiccation’’ mean?

Last Answer : Definition: Desiccation is the process of complete removal of mechanically admixed water from substances. Examples of desiccants: i. Dried Silica gel, ii. Phosphorous pentoxide iii. calcium sulfate, iv. Anhydrous calcium chloride, v. Conc. Sulphuric acid vi. Phosphorous trioxide

Define the term vaccine. Discuss the method of preparation of small pox vaccine using animals

Description : Define the term vaccine. Discuss the method of preparation of small pox vaccine using animals

Last Answer : Definition:   Vaccines are antigenic preparations which stimulate antibody formation and producing immunity. Small pox vaccine is prepared by two methods 1) By using animals 2) By using Eggs ... Filling sealing and storage: filled in final container under aseptic condition and freeze drying. 

Explain the factors to be considered while designing a lighting scheme.

Description : Explain the factors to be considered while designing a lighting scheme.

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Pick up the consideration to the taken while designing a hospital from the following: (A) The operation theatre unit to be detached as it requires sterilized zone but near the ward for the patients and doctor (B) The mortuary should be detached from the main circulation with a post-mortem room (C) Casualty unit should be provided a separate entrance (D) All the above

Description : Pick up the consideration to the taken while designing a hospital from the following: (A) The operation theatre unit to be detached as it requires sterilized zone but near the ward for the patients ... post-mortem room (C) Casualty unit should be provided a separate entrance (D) All the above

Last Answer : Answer: Option D

Explain principle and working of fluid energy mill with a diagram.

Description : Explain principle and working of fluid energy mill with a diagram.

Last Answer : Principle  It works on the principle of impact and attrition. Working: The air or inert gas is introduced with a very high pressure through nozzles. Solids are introduced into air stream through inlet. ... 100 mesh and then passed through fluid energy mill. Diagram of fluid energy mill :

Explain the factors affecting evaporation of a liquid.

Description : Explain the factors affecting evaporation of a liquid.

Last Answer : Factor affecting evaporation  1. Temperature: The rate of evaporation is directly proportional to the temperature of the liquid. The evaporation can be accelerated by increasing the temperature but it ... of evaporation is maximum at its boiling point when the liquid has maximum vapour pressure.

Explain in detail evaporating still with its advantage and disadvantages.

Description : Explain in detail evaporating still with its advantage and disadvantages.

Last Answer : It consist of a hemispherical pan made from copper or stainless steel. It is surrounded by a steam jacket. Still is covered from top and connected to condenser. Hemispherical shape ... heat transfer is poor. Heating surface is limited. Not suitable for thermolabile material.

Explain construction and working of “Evaporation Still”

Description : Explain construction and working of “Evaporation Still”

Last Answer : Construction:  It consist of a hemispherical pan made from copper or stainless steel. It is surrounded by a steam jacket. Still is covered from top and connected to the ... liquid is evaporated and condensed into the condenser 4) The product is collected through product outlet.

State and explain the steps involved in sugar coating of tablet.

Description : State and explain the steps involved in sugar coating of tablet.

Last Answer : Steps of sugar coating of tablet: Sieving Sealing Sub-coating Syrup coating Finishing Polishing i) Sieving :- The tablets to be coated are shaken in a suitable sieve to remove the fine ... on the canvas cloth. This gives a proper shining to the tablets Sugar coating is an art 

Explain The theory of freeze drying and state its application.

Description : Explain The theory of freeze drying and state its application.

Last Answer : Theory:-  i) In this process, the material is frozen in a suitable container connected to a high vacuum system, so that the vapour pressure of water vapours is ... antibiotics, blood products, vaccines, enzymes preparation, microbiological cultures & other thermo labile pharmaceutical substances.

Explain the principle and construction of Planetary Mixer.

Description : Explain the principle and construction of Planetary Mixer.

Last Answer : Principle :-  The planetary mixer consists of stationary vessel & anchor shape blade which has planetary motion. The anchor shape blade rotates on its axis & axis moves around . ... iv) The mixing shaft is driven by planetary gear connected to an electric meter. Diagram

State and explain the stages of simple Percolation

Description : State and explain the stages of simple Percolation

Last Answer : Stages of Percolation:- a) Imbibition b) Maceration c) Percolation a) Imbibition :-   1) Powders drug is moistened with a sufficient quantity of menstruum & allowed to stand for 4 hrs in ... constituents present in the drug by the slow passage of the menstruum through the column of the drug.

Explain the importance of closures.

Description : Explain the importance of closures.

Last Answer : Closures are used: To prevent loss of material. To avoid contamination. To prevent deterioration. To prevents spoilage. 

Explain the terms. a) Arka b) Svarasas

Description : Explain the terms. a) Arka b) Svarasas

Last Answer : Arka: It is the liquid preparation obtained by distillation of certain liquid or crude drug soaked in water using distillation unit. They are used in fever, dyspepsia and as cooling lotion when ... fresh medicinal plants in a mortar and expressed and then strained through a clean muslin cloth.

Explain the theory of fractional distillation?

Description : Explain the theory of fractional distillation?

Last Answer : Theory of fractional distillation:  i. When substance dissolved in liquid, the vapour pressure of liquid is lowered. ii. When two miscible liquids are mixed together each will act as ... from two miscible liquids at boiling point is richer in component exerting the greater partial pressure.

Explain the factors which affect rate of filtration by Darcy’s law.

Description : Explain the factors which affect rate of filtration by Darcy’s law.

Last Answer : According to Darcy's Law, Where  v = volume of filtrate  K= permeability coefficient & is dependent on filter medium & filter cake.  A = Area of filter bed ... filtration. As the filtration process proceeds, thickness of cake increases which decreases the rate of filtration. 

Explain principle of freeze drying. Give its advantages.

Description : Explain principle of freeze drying. Give its advantages.

Last Answer : Principle:  i. The material is frozen in a suitable container connected to a high vacuum system, so that the vapour pressure of water is reduced to less than that of material being dried. ii. ... it is properly sealed in an inert atmosphere. vii. The sterility of the product can be maintained. 

Explain the objectives of mixing. Explain the different types of mixtures.

Description : Explain the objectives of mixing. Explain the different types of mixtures. 

Last Answer : Objective of mixing 1) To form a uniform mixture. 2)To promote chemical reaction to get uniform product 3) Help in formation of suspension/paste 4) Help in mixing of water and oil .e.g. emulsion. ... not have tendency to mix but once mix, don't separate after mixing. E.g. ointment, paste, cream.

Differentiate between Evaporation and Distillation and explain the working and application of simple distillation.

Description : Differentiate between Evaporation and Distillation and explain the working and application of simple distillation.

Last Answer : Evaporation Distillation:  1. Free escape of vapors from the surface of liquid below its boiling point. Evaporation takes place even at room temperature 1) Process of ... Concentration of liquid and to separate non volatile solid from the volatile liquid such as alcohol and ether.