Cocks are used to control (A) Water (B) Any liquid (C) Solids (D) None of these

Cocks are used to control
(A) Water
(B) Any liquid
(C) Solids
(D) None of these
by

1 Answer

Answer :

(B) Any liquid
by

Related questions

Size, capacity and materials need be specified for (A) Bib-cocks (B) Stop-cocks (C) Ball valves (D) All the above

Description : Size, capacity and materials need be specified for (A) Bib-cocks (B) Stop-cocks (C) Ball valves (D) All the above

Last Answer : (D) All the above

Tabular bowl centrifuges as compared to disk bowl centrifuges (A) Operate at higher speed (B) Employ bowl of larger diameter (C) Can’t be operated under pressure/vacuum (D) Can’t be used for separation of fine suspended solids from a liquid

Description : Tabular bowl centrifuges as compared to disk bowl centrifuges (A) Operate at higher speed (B) Employ bowl of larger diameter (C) Can’t be operated under pressure/vacuum (D) Can’t be used for separation of fine suspended solids from a liquid

Last Answer : (A) Operate at higher speed

Pick out the wrong statement. (A) Close circuit grinding is more economical than open circuit grinding (B) Cod oil, beef tallow or aluminium stearates are used as grinding aids in cement 'industries' (C) The equipment used for the removal of traces of solids from a liquid is called a classifier (D) Size enlargement is a mechanical operation exemplified by medicinal tablet making

Description : Pick out the wrong statement. (A) Close circuit grinding is more economical than open circuit grinding (B) Cod oil, beef tallow or aluminium stearates are used as grinding aids in cement ... is called a classifier (D) Size enlargement is a mechanical operation exemplified by medicinal tablet making

Last Answer : (C) The equipment used for the removal of traces of solids from a liquid is called a classifier

Which of the following is the most suitable filter for separation ofabrasive solids suspended in a corrosive liquid?(A) Sand bed filter(B) Plate and frame filter press(C) Vacuum filter(D) Batch basket centrifuge

Description : Which of the following is the most suitable filter for separation ofabrasive solids suspended in a corrosive liquid? (A) Sand bed filter (B) Plate and frame filter press (C) Vacuum filter (D) Batch basket centrifuge

Last Answer : (C) Vacuum filter

__________ column is the most suitable for achieving the best performance for mass transfer operations involving liquid with dispersed solids. (A) Wetted wall (B) Packed (C) Plate (D) Spray

Description : __________ column is the most suitable for achieving the best performance for mass transfer operations involving liquid with dispersed solids. (A) Wetted wall (B) Packed (C) Plate (D) Spray

Last Answer : C) Plate

The ratio of dissolved solids in circulating water to the dissolved solids in makeup water is called a) Liquid gas ratio b) Cycle of concentration c) Cooling tower effectiveness d) None of the above

Description : The ratio of dissolved solids in circulating water to the dissolved solids in makeup water is called a) Liquid gas ratio b) Cycle of concentration c) Cooling tower effectiveness d) None of the above

Last Answer : Cycle of concentration

The ratio of dissolved solids in circulating water to dissolved solids in makeup water is called. • Liquid gas ratio • Cycle of concentration • Cooling tower effectiveness • None of the above

Description : The ratio of dissolved solids in circulating water to dissolved solids in makeup water is called. • Liquid gas ratio • Cycle of concentration • Cooling tower effectiveness • None of the above

Last Answer : Cycle of concentration

Sound waves travels through gas, liquid, and solids?

Description : Sound waves travels through gas, liquid, and solids?

Last Answer : yes it travels through all three medium. infact sound will travle much faster through liquid and solid. remember how they show whale sounds in nature documentries??

What is a solution A. a solid dissolved in a gas B. a solute and a solvent C. a liquid dissolved in a gas D. an amalgam of solids, liquids, and gases?

Description : What is a solution A. a solid dissolved in a gas B. a solute and a solvent C. a liquid dissolved in a gas D. an amalgam of solids, liquids, and gases?

Last Answer : B. A solute and a solvent

Which of the following pumps in used to pump sewage solids with liquid sewage without clogging the pump is? A. Centrifugal pump B. Pneumatic ejector C. Reciprocating pump D. None of these

Description : Which of the following pumps in used to pump sewage solids with liquid sewage without clogging the pump is? A. Centrifugal pump B. Pneumatic ejector C. Reciprocating pump D. None of these

Last Answer : ANS: A

The process of converting liquid oil into solids saturated fats by passing hydrogen gas is

Description : The process of converting liquid oil into solids saturated fats by passing hydrogen gas is

Last Answer : called hydrogenation.

Some substances are good conductor of electricity in both the solid and liquid states. These substances are generally-------? A. ionic substances B. metallic substances (Answer) C. molecular solids D. covalent network solids

Description : Some substances are good conductor of electricity in both the solid and liquid states. These substances are generally-------? A. ionic substances B. metallic substances (Answer) C. molecular solids D. covalent network solids

Last Answer : B. metallic substances (Answer)

What is the advantage of flash pasteurization? a. It Doesn't Get As Hot b. It Is Faster c. It Is Also Used For Solids, Not Just Liquids d. It Also Sterilizes The Liquid

Description : What is the advantage of flash pasteurization? a. It Doesn't Get As Hot b. It Is Faster c. It Is Also Used For Solids, Not Just Liquids d. It Also Sterilizes The Liquid

Last Answer : b. It Is Faster

Sound waves do not travel through _______. a) solids b)gases c)liquid d)vacuum

Description : Sound waves do not travel through _______. a) solids b)gases c)liquid d)vacuum

Last Answer : d)vacuum

Which of the following factors control the design of a fluid-solid reactor? (A) Reaction kinetics for single particle (B) Size distribution of solids being treated (C) Flow patterns of solids and fluid in the reactor (D) All (A), (B) and (C)

Description : Which of the following factors control the design of a fluid-solid reactor? (A) Reaction kinetics for single particle (B) Size distribution of solids being treated (C) Flow patterns of solids and fluid in the reactor (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the wrong statement. (A) Different solids have different equilibrium moisture curves (B) Total condenser or reboiler is considered equivalent to one theoretical plate in McCabe-Thiele method of theoretical plate calculation for distillation column (C) Heat removal load on cooler remains constant, even with increase of the reflux ratio in a distillation column (D) Even a forced draft cooling tower cannot cool water below the wet bulb temperature

Description : Pick out the wrong statement. (A) Different solids have different equilibrium moisture curves (B) Total condenser or reboiler is considered equivalent to one theoretical plate in McCabe-Thiele method of ... (D) Even a forced draft cooling tower cannot cool water below the wet bulb temperature

Last Answer : (C) Heat removal load on cooler remains constant, even with increase of the reflux ratio in a distillation column

Steam condensate is recovered by steam traps and recycled for use as boiler feed water, because of its low (A) Hardness (B) Dissolved solids content (C) Suspended solids content (D) All (A), (B) and (C)

Description : Steam condensate is recovered by steam traps and recycled for use as boiler feed water, because of its low (A) Hardness (B) Dissolved solids content (C) Suspended solids content (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

. An evaporator while concentrating an aqueous solution from 10 to 40% solids evaporates 30000 kg of water. The amount of solids handled by the system in kg is (A) 4000 (B) 9000 (C) 4600 (D) 3000

Description : . An evaporator while concentrating an aqueous solution from 10 to 40% solids evaporates 30000 kg of water. The amount of solids handled by the system in kg is (A) 4000 (B) 9000 (C) 4600 (D) 3000

Last Answer : (A) 4000

A multiple effect evaporator has a capacity to process 4000 kg of solid caustic soda per day, when it is concentrating from 10% to 25% solids. The water evaporated in kg per day is (A) 6000 (B) 24000 (C) 60000 (D) 48000

Description : A multiple effect evaporator has a capacity to process 4000 kg of solid caustic soda per day, when it is concentrating from 10% to 25% solids. The water evaporated in kg per day is (A) 6000 (B) 24000 (C) 60000 (D) 48000

Last Answer : (B) 24000

Fresh orange juice contains 12% (by weight) solids and the rest water 90% of the fresh juice is sent to an evaporator to remove water and subsequently mixed with the remaining 10% of fresh juice. The resultant product contains 40% solids. The kg of water removed from 1 kg fresh juice is (A) 0.4 (B) 0.5 (C) 0.6 (D) 0.7

Description : Fresh orange juice contains 12% (by weight) solids and the rest water 90% of the fresh juice is sent to an evaporator to remove water and subsequently mixed with the remaining 10% of fresh juice. The resultant product contains 40% solids. ... from 1 kg fresh juice is (A) 0.4 (B) 0.5 (C) 0.6 (D) 0.7

Last Answer : (D) 0.7

Presence of __________ in water stream are deleterious to aquatic life. (A) Soluble and toxic organics (B) Suspended solids (C) Heavy metals and cyanides(D) All (A), (B) & (C)

Description : Presence of __________ in water stream are deleterious to aquatic life. (A) Soluble and toxic organics (B) Suspended solids (C) Heavy metals and cyanides (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Turbidity of water is an indication of the presence of (A) Suspended inorganic matter (B) Dissolved solids (C) Floating solids (D) Dissolved gases

Description : Turbidity of water is an indication of the presence of (A) Suspended inorganic matter (B) Dissolved solids (C) Floating solids (D) Dissolved gases

Last Answer : (A) Suspended inorganic matter

Coal washing waste water containing about 3% suspended solids (comprising of clay, slate, stone etc.) is treated for solid particles removal (A) By chemical coagulation (B) In sedimentation tanks equipped with mechanical scrapper (C) In vacuum filter (D) In clarifiers

Description : Coal washing waste water containing about 3% suspended solids (comprising of clay, slate, stone etc.) is treated for solid particles removal (A) By chemical coagulation (B) In sedimentation tanks equipped with mechanical scrapper (C) In vacuum filter (D) In clarifiers

Last Answer : (B) In sedimentation tanks equipped with mechanical scrapper

Removal of __________ is accomplished by aeration of water. (A) Dissolved gases (B) Suspended solids (C) Dissolved solids (D) None of these

Description : Removal of __________ is accomplished by aeration of water. (A) Dissolved gases (B) Suspended solids (C) Dissolved solids (D) None of these

Last Answer : (A) Dissolved gases

Foaming and priming in boiler operation can be reduced by reduction in __________ in feed water. (A) Turbidity (B) Color (Hazen) (C) Total solids (D) All (A), (B) & (C)

Description : Foaming and priming in boiler operation can be reduced by reduction in __________ in feed water. (A) Turbidity (B) Color (Hazen) (C) Total solids (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Which of the following is the most lethal water pollutant? (A) Phenol and cyanide (B) Chlorine(C) Alkalis(D) Suspended solids

Description : Which of the following is the most lethal water pollutant? (A) Phenol and cyanide (B) Chlorine (C) Alkalis (D) Suspended solids

Last Answer : (A) Phenol and cyanide

Mixing of plastic solids is generally facilitated by (A) Dispersion (B) Mastication (C) Kneading (D) None of these

Description : Mixing of plastic solids is generally facilitated by (A) Dispersion (B) Mastication (C) Kneading (D) None of these

Last Answer : (C) Kneading

Cartridge filters are termed as 'edge' filters, because of the fact that the (A) Disks have very sharp edge (B) Solids are not deposited at the edge of the disk (C) Bulk of the solids are removed at the periphery of the disks (D) None of these

Description : Cartridge filters are termed as 'edge' filters, because of the fact that the (A) Disks have very sharp edge (B) Solids are not deposited at the edge of the disk (C) Bulk of the solids are removed at the periphery of the disks (D) None of these

Last Answer : (C) Bulk of the solids are removed at the periphery of the disks

Pick out the wrong statement. (A) Recycled coarse material to the grinder by a classifier is termed as circulating load (B) Wear and tear in wet crushing is more than that in dry crushing of materials (C) Size enlargement (opposite of size reduction) is not a mechanical operation (D) A 'dust catcher' is simply an enlargement in a pipeline which permits the solids to settle down due to reduction in velocity of the dust laden gas

Description : Pick out the wrong statement. (A) Recycled coarse material to the grinder by a classifier is termed as circulating load (B) Wear and tear in wet crushing is more than that in dry crushing of ... a pipeline which permits the solids to settle down due to reduction in velocity of the dust laden gas

Last Answer : (C) Size enlargement (opposite of size reduction) is not a mechanical operation

A suspension of glass beads in ethylene glycol has a hindered settling velocity of 1.7 mm/s, while the terminal settling velocity of a single glass bead in ethylene glycol is 17 mm/s. If the Richardson-Zaki hindered settling index is 4.5, the volume fraction of solids in the suspension is (A) 0.1 (B) 0.4 (C) 0.6 (D) None of these

Description : A suspension of glass beads in ethylene glycol has a hindered settling velocity of 1.7 mm/s, while the terminal settling velocity of a single glass bead in ethylene glycol is 17 mm/s. If the Richardson-Zaki hindered settling index ... in the suspension is (A) 0.1 (B) 0.4 (C) 0.6 (D) None of these

Last Answer : (C) 0.6

The capacity of a classifier in 'tons of solid/hr' is given by (where, A = cross-sectional area in m2 , V = rising velocity of fluid in m/sec, S = percentage of solids in the suspension by volume, ρ = density of solids in kg/m3 ) (A) 3.6 AVS.ρ (B) 3.6 A.V.ρ (C) 3.6 A.S. ρ (D) 3.6 AVS/ρ

Description : The capacity of a classifier in 'tons of solid/hr' is given by (where, A = cross-sectional area in m2 , V = rising velocity of fluid in m/sec, S = percentage of solids in the suspension by volume, ρ = density of solids in kg/m3 ) (A) 3.6 AVS.ρ (B) 3.6 A.V.ρ (C) 3.6 A.S. ρ (D) 3.6 AVS/ρ

Last Answer : (A) 3.6 AVS.ρ

If a force greater than that of gravity is used to separate solids & fluidsof different densities, the process is termed as the(A) Sedimentation(B) Flocculation(C) Dispersion(D) Centrifugation

Description : If a force greater than that of gravity is used to separate solids & fluidsof different densities, the process is termed as the (A) Sedimentation (B) Flocculation (C) Dispersion (D) Centrifugation

Last Answer : (D) Centrifugation

Pick out the correct statement. (A) Plastic chips are called non-cohesive solids (B) Kick's crushing law is, P/m = K . ln (D̅sa /Ds̅b ) (C) Communition is a generic term for size enlargement operation (D) Energy required in kwh per ton of product, such that 80% of it passes through a 200 mesh screen, is called 'Work index'

Description : Pick out the correct statement. (A) Plastic chips are called non-cohesive solids (B) Kick's crushing law is, P/m = K . ln (D̅sa /Ds̅b ) (C) Communition is a generic term for size enlargement ... per ton of product, such that 80% of it passes through a 200 mesh screen, is called 'Work index'

Last Answer : (B) Kick's crushing law is, P/m = K . ln (D̅sa /Ds̅b )

Filter aids like asbestos, kieselguhr, diatomaceous earth etc. are used to increase the porosity of the final filter cake & reducing the cake resistance during filtration. Filter aid is (A) Added to the feed slurry (B) Pre-coated on the filter medium prior to filtration (C) Separated from the cake by dissolving solids or by burning it off (D) All 'a', 'b' & 'c'

Description : Filter aids like asbestos, kieselguhr, diatomaceous earth etc. are used to increase the porosity of the final filter cake & reducing the cake resistance during filtration. Filter aid is (A) Added to the feed slurry (B) Pre ... the cake by dissolving solids or by burning it off (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

The process by which fine solids is removed from liquids is termed as (A) Decantation (B) Flocculation (C) Sedimentation (D) Classification

Description : The process by which fine solids is removed from liquids is termed as (A) Decantation (B) Flocculation (C) Sedimentation (D) Classification

Last Answer : (C) Sedimentation

__________ are mixed using ribbon blenders. (A) Lumpy solids and low viscosity liquids (B) Dry powders (C) High viscosity liquids (D) Thick pastes

Description : __________ are mixed using ribbon blenders. (A) Lumpy solids and low viscosity liquids (B) Dry powders (C) High viscosity liquids (D) Thick pastes

Last Answer : (B) Dry powders

Cyclones are used primarily for separating (A) Solids (B) Solids from fluids (C) Liquids (D) Solids from solids

Description : Cyclones are used primarily for separating (A) Solids (B) Solids from fluids (C) Liquids (D) Solids from solids

Last Answer : (B) Solids from fluids

For coarse reduction of hard solids, use (A) Impact (B) Attrition (C) Compression (D) Cutting

Description : For coarse reduction of hard solids, use (A) Impact (B) Attrition (C) Compression (D) Cutting

Last Answer : (C) Compression

The work index in Bond's law for crushing of solids has the following dimensions (A) No units (dimensionless) (B) kWh/ton (C) kW/ton (D) kWh.m1/2 /ton

Description : The work index in Bond's law for crushing of solids has the following dimensions (A) No units (dimensionless) (B) kWh/ton (C) kW/ton (D) kWh.m1/2 /ton

Last Answer : (B) kWh/ton

For crushing of solids, the Rittinger's law states that the work required for crushing is proportional to(A) The new surface created(B) The size reduction ratio(C) The change in volume due to crushing(D) None of these

Description : For crushing of solids, the Rittinger's law states that the work required for crushing is proportional to (A) The new surface created (B) The size reduction ratio (C) The change in volume due to crushing (D) None of these

Last Answer : (A) The new surface created

Grizzlies are used for separating __________ solids. (A) Coarse (B) Fine (C) Any size (D) None of these

Description : Grizzlies are used for separating __________ solids. (A) Coarse (B) Fine (C) Any size (D) None of these

Last Answer : (B) Fine

The optimum moisture content in solids to be crushed/ground ranges from __________ percent. (A) 3 to 4 (B) 8 to 10 (C) 10 to 15 (D) 15 to 20

Description : The optimum moisture content in solids to be crushed/ground ranges from __________ percent. (A) 3 to 4 (B) 8 to 10 (C) 10 to 15 (D) 15 to 20

Last Answer : (A) 3 to 4

Pick out the wrong statement. (A) More commonly used jaw crusher between Dodge jaw crusher and Blake jaw crusher is the later one(B) There are only four methods namely compression, impact, attrition andcutting, which the size reduction equipments employ(C) Cutting machines mainly employ 'attrition' for size reduction of solids(D) Operating principles of Dodge and Blake jaw crushers are combined inthe working of universal jaw crushers

Description : Pick out the wrong statement. (A) More commonly used jaw crusher between Dodge jaw crusher and Blake jaw crusher is the later one (B) There are only four methods namely compression, impact ... Operating principles of Dodge and Blake jaw crushers are combined in the working of universal jaw crushers

Last Answer : (C) Cutting machines mainly employ 'attrition' for size reduction of solids

__________ is the most suitable for compounding rubber and plastic solids. (A) Banbury mixer (B) Pan mixer (C) Pug mill (D) Charge can mixer

Description : __________ is the most suitable for compounding rubber and plastic solids. (A) Banbury mixer (B) Pan mixer (C) Pug mill (D) Charge can mixer

Last Answer : (A) Banbury mixer

Visco-elastic behaviour of materials which is time dependent is common in (A) Plastics (B) Crystalline solid (C) Non-crystalline solids (D) Non-crystalline organic polymer

Description : Visco-elastic behaviour of materials which is time dependent is common in (A) Plastics (B) Crystalline solid (C) Non-crystalline solids (D) Non-crystalline organic polymer

Last Answer : (D) Non-crystalline organic polymer

A packed tower compared to a plate tower for a particular mass transfer operation (A) Incurs smaller pressure drop (B) Allows installation of cooling coils (C) Is less costly when built in large sizes/diameters (D) Is more suitable, if suspended solids are present in fluid stream

Description : A packed tower compared to a plate tower for a particular mass transfer operation (A) Incurs smaller pressure drop (B) Allows installation of cooling coils (C) Is less costly when built in large sizes/diameters (D) Is more suitable, if suspended solids are present in fluid stream

Last Answer : (A) Incurs smaller pressure drop

Equilibrium-moisture curves of different solids (A) Are different (B) Are same (C) Depend on the humidity of the gas (D) None of these

Description : Equilibrium-moisture curves of different solids (A) Are different (B) Are same (C) Depend on the humidity of the gas (D) None of these

Last Answer : (A) Are different

Flights in a rotary dryer are provided to (A) Lift and shower the solids thus exposing it thoroughly to the drying action of the gas (B) Reduce the residence time of solid (C) Increase the residence time of the solid (D) None of these

Description : Flights in a rotary dryer are provided to (A) Lift and shower the solids thus exposing it thoroughly to the drying action of the gas (B) Reduce the residence time of solid (C) Increase the residence time of the solid (D) None of these

Last Answer : (A) Lift and shower the solids thus exposing it thoroughly to the drying action of the gas

Pick out the wrong statement pertaining to leaching. (A) Fine solids cannot be leached in a Pachuca tank (B) Door classifier can be used for leaching of coarse solids (C) Vegetable seeds can be leached in either of Bollman extractor, Rotocel or Kennedy extractor (D) Very high temperature is not needed for the leaching of sugar beet

Description : Pick out the wrong statement pertaining to leaching. (A) Fine solids cannot be leached in a Pachuca tank (B) Door classifier can be used for leaching of coarse solids (C) Vegetable seeds can be ... , Rotocel or Kennedy extractor (D) Very high temperature is not needed for the leaching of sugar beet

Last Answer : (A) Fine solids cannot be leached in a Pachuca tank