An example of recuperative furnace is the (A) Soaking pit (B) Open hearth furnace (C) Coke ovens (D) None of these

An example of recuperative furnace is the
(A) Soaking pit
(B) Open hearth furnace
(C) Coke ovens
(D) None of these
by

1 Answer

Answer :

(A) Soaking pit
by

Related questions

Which of the following is not a recuperative furnace? (A) Soaking pit (B) Reheating furnace(C) Steam boiler(D) Coke oven

Description : Which of the following is not a recuperative furnace? (A) Soaking pit (B) Reheating furnace (C) Steam boiler (D) Coke oven

Last Answer : (D) Coke oven

Neutral atmosphere is maintained in a/an __________ furnace. (A) Cold rolled steel coil annealing (B) Open hearth (C) Soaking pit (D) Walking beam reheating

Description : Neutral atmosphere is maintained in a/an __________ furnace. (A) Cold rolled steel coil annealing (B) Open hearth (C) Soaking pit (D) Walking beam reheating

Last Answer : (A) Cold rolled steel coil annealing

Which furnace employs preheating, heating and soaking zones? (A) Soaking pit (B) Reheating furnace (C) Open hearth furnace (D) Cupola

Description : Which furnace employs preheating, heating and soaking zones? (A) Soaking pit (B) Reheating furnace (C) Open hearth furnace (D) Cupola

Last Answer : (B) Reheating furnace

__________ is an indirectly heated furnace. (A) Open hearth furnace (B) Muffle furnace (C) Soaking pit (D) Reheating furnace

Description : __________ is an indirectly heated furnace. (A) Open hearth furnace (B) Muffle furnace (C) Soaking pit (D) Reheating furnace

Last Answer : (B) Muffle furnace

Regenerators are normally provided in the (A) Glass melting furnace (B) Open hearth furnace (C) By product coke ovens (D) All (A), (B) and (C)

Description : Regenerators are normally provided in the (A) Glass melting furnace (B) Open hearth furnace (C) By product coke ovens (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Regenerators are normally provided in the (A) Glass melting furnace (B) Open hearth furnace (C) By product coke ovens (D) All (A), (B) and (C)

Description : Regenerators are normally provided in the (A) Glass melting furnace (B) Open hearth furnace (C) By product coke ovens (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Regenerators are installed in (A) Coke ovens (B) Open hearth furnace (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Regenerators are installed in (A) Coke ovens (B) Open hearth furnace (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Regenerators are used for waste heat recovery in (A) By-product coke ovens (B) Beehive coke oven (C) Blast furnace stoves (D) Soaking pits

Description : Regenerators are used for waste heat recovery in (A) By-product coke ovens (B) Beehive coke oven (C) Blast furnace stoves (D) Soaking pits

Last Answer : (A) By-product coke ovens

An example of indirectly heated furnace is the (A) Soaking pit (B) Muffle furnace (C) Reheating furnace (D) None of these

Description : An example of indirectly heated furnace is the (A) Soaking pit (B) Muffle furnace (C) Reheating furnace (D) None of these

Last Answer : (B) Muffle furnace

An example of shaft furnace is the (A) L.D. converter (B) Glass melting tank (C) Blast furnace (D) Soaking pit

Description : An example of shaft furnace is the (A) L.D. converter (B) Glass melting tank (C) Blast furnace (D) Soaking pit

Last Answer : (C) Blast furnace

Which of the following is not a directly fired furnace? (A) By-product coke oven (B) Calcination kiln (C) Sintering furnace (D) Open hearth furnace

Description : Which of the following is not a directly fired furnace? (A) By-product coke oven (B) Calcination kiln (C) Sintering furnace (D) Open hearth furnace

Last Answer : (A) By-product coke oven

Which is a regenerative furnace? (A) Coke oven heating chamber (B) Open hearth furnace (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Which is a regenerative furnace? (A) Coke oven heating chamber (B) Open hearth furnace (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Reducing atmosphere is maintained in a (A) Calcination kiln (B) Blast furnace (C) Soaking pit (D) L.D. converter

Description : Reducing atmosphere is maintained in a (A) Calcination kiln (B) Blast furnace (C) Soaking pit (D) L.D. converter

Last Answer : (B) Blast furnace

Combustion of furnace oil in a furnace (soaking pit) with preheated combustion air at 400°C results in saving of about __________ percentfurnace oil as compared to its combustion with atmospheric air, if the fluegas outlet temperature from the soaking pit is 1200°C.(A) 5(B) 60(C) 20(D) 40

Description : Combustion of furnace oil in a furnace (soaking pit) with preheated combustion air at 400°C results in saving of about __________ percentfurnace oil as compared to its combustion with atmospheric air, if the flue gas outlet temperature from the soaking pit is 1200°C. (A) 5 (B) 60 (C) 20 (D) 40

Last Answer : (C) 20

Which of the following is a periodic furnace? (A) Tunnel kiln (B) Rotary kiln (C) Soaking pit (D) Reheating furnace

Description : Which of the following is a periodic furnace? (A) Tunnel kiln (B) Rotary kiln (C) Soaking pit (D) Reheating furnace

Last Answer : (C) Soaking pit

Which is a continuous furnace? (A) Coke ovens (B) Annealing furnace (C) Glass tank furnace

Description : Which is a continuous furnace? (A) Coke ovens (B) Annealing furnace (C) Glass tank furnace

Last Answer : (C) Glass tank furnace

Coke ovens in steel plant are heated by (A) Electricity (B) Blast furnace gas/mixed gas (C) Coke oven gas (D) Both (B) and (C)

Description : Coke ovens in steel plant are heated by (A) Electricity (B) Blast furnace gas/mixed gas (C) Coke oven gas (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Main use of hard coke produced by high temperature carbonisation is in the (A) Iron blast furnace (B) Cupola in foundries (C) Sinter making (D) Domestic ovens

Description : Main use of hard coke produced by high temperature carbonisation is in the (A) Iron blast furnace (B) Cupola in foundries (C) Sinter making (D) Domestic ovens

Last Answer : (A) Iron blast furnace

Pot furnace which is either regenerative or recuperative, is used in the manufacture of (A) Glass (B) Stainless steel (C) Potteries (D) Refractory bricks

Description : Pot furnace which is either regenerative or recuperative, is used in the manufacture of (A) Glass (B) Stainless steel (C) Potteries (D) Refractory bricks

Last Answer : (A) Glass

Operation of blast furnace stove is based on the principles of a __________ furnace. (A) Regenerative (B) Recuperative (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Operation of blast furnace stove is based on the principles of a __________ furnace. (A) Regenerative (B) Recuperative (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (A) Regenerative

Thermal efficiency of an open hearth furnace may be about __________ percent. (A) 5 (B) 20 (C) 50 (D) 80

Description : Thermal efficiency of an open hearth furnace may be about __________ percent. (A) 5 (B) 20 (C) 50 (D) 80

Last Answer : (B) 20

Which is not a hearth furnace? (A) Glass tank furnace (B) Open hearth furnace (C) Cupola

Description : Which is not a hearth furnace? (A) Glass tank furnace (B) Open hearth furnace (C) Cupola

Last Answer : (C) Cupola

Pick up the correct statement from the following: (A) In basic Bessemer process, the steel heats the converter (B) In open-hearth process, the furnace heats the steel (C) In Siemens process, the impurities of pig iron are oxidised by the oxygen of the ore (D) All the above

Description : Pick up the correct statement from the following: (A) In basic Bessemer process, the steel heats the converter (B) In open-hearth process, the furnace heats the steel (C) In Siemens process, the impurities of pig iron are oxidised by the oxygen of the ore (D) All the above

Last Answer : Answer: Option D

In furnaces operating at very high temperature (say) 1250°C, e.g. soaking pit), the maximum heat transfer takes place by (A) Conduction (B) Convection (C) Radiation (D) Cannot be predicted

Description : In furnaces operating at very high temperature (say) 1250°C, e.g. soaking pit), the maximum heat transfer takes place by (A) Conduction (B) Convection (C) Radiation (D) Cannot be predicted

Last Answer : (C) Radiation

In which of the following furnaces, the gases are sucked through the stock bed from below? (A) Soaking pit (B) Sintering machine (C) Beehive oven (D) None of these

Description : In which of the following furnaces, the gases are sucked through the stock bed from below? (A) Soaking pit (B) Sintering machine (C) Beehive oven (D) None of these

Last Answer : (B) Sintering machine

Large tonnage of refractory bricks are dried in a (A) Shaft furnace (B) Rotary hearth furnace (C) Tunnel kiln (D) Muffle furnace

Description : Large tonnage of refractory bricks are dried in a (A) Shaft furnace (B) Rotary hearth furnace (C) Tunnel kiln (D) Muffle furnace

Last Answer : (C) Tunnel kiln

Unit of furnace loading is (A) Ton stock/hr/m2 hearth area (B) Ton stock/hr (C) Ton stock/m2 hearth area (D) Both (B) and (C)

Description : Unit of furnace loading is (A) Ton stock/hr/m2 hearth area (B) Ton stock/hr (C) Ton stock/m2 hearth area (D) Both (B) and (C)

Last Answer : (A) Ton stock/hr/m2 hearth area

If the flame is produced under the hearth and then sweeps up into the heating chamber, this is called a/an __________ furnace. (A) Sidefired (B) Underfired (C) Covered (D) Recirculating

Description : If the flame is produced under the hearth and then sweeps up into the heating chamber, this is called a/an __________ furnace. (A) Sidefired (B) Underfired (C) Covered (D) Recirculating

Last Answer : (B) Underfired

An improved and fuel efficient version of the pusher type reheating furnace is the __________ furnace. (A) Walking beam (B) Shaft (C) Tunnel (D) Rotary hearth

Description : An improved and fuel efficient version of the pusher type reheating furnace is the __________ furnace. (A) Walking beam (B) Shaft (C) Tunnel (D) Rotary hearth

Last Answer : (A) Walking beam

The heating capacity of continuous reheating furnace depends upon the (A) Hearth area and furnace temperature (B) Emissivity of the stock (C) Ratio of wall surface to stock surface (D) All (A), (B) and (C)

Description : The heating capacity of continuous reheating furnace depends upon the (A) Hearth area and furnace temperature (B) Emissivity of the stock (C) Ratio of wall surface to stock surface (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following furnaces will have maximum thermal efficiency? (A) Soaking pits (B) Walking beam reheating furnace (C) Boiler furnace (D) Rotary kilns

Description : Which of the following furnaces will have maximum thermal efficiency? (A) Soaking pits (B) Walking beam reheating furnace (C) Boiler furnace (D) Rotary kilns

Last Answer : (C) Boiler furnace

Beehive coke ovens are made of __________ bricks.(A) Silica (B) Fireclay (C) Silicon carbide (D) Corundum

Description : Beehive coke ovens are made of __________ bricks. (A) Silica (B) Fireclay (C) Silicon carbide (D) Corundum

Last Answer : (A) Silica

In regenerative air preheater (as practised in heating of coke ovens), the heat is transferred (A) Through a metallic wall (B) By direct contact of hot flue gas with air (C) By heating an intermediate material (like chequor bricks) and then heating the air from this hot material (D) None of these

Description : In regenerative air preheater (as practised in heating of coke ovens), the heat is transferred (A) Through a metallic wall (B) By direct contact of hot flue gas with air (C) By ... material (like chequor bricks) and then heating the air from this hot material (D) None of these

Last Answer : (C) By heating an intermediate material (like chequor bricks) and then heating the air from this hot material

Beehive coke oven (A) Facilitates by-products recovery (B) Takes 2-3 days for coking of coal but requires no external fuel for heating (C) Gives larger yield of coke (around 85%) as compared to by-product ovens (D) Produces coke with very poor strength

Description : Beehive coke oven (A) Facilitates by-products recovery (B) Takes 2-3 days for coking of coal but requires no external fuel for heating (C) Gives larger yield of coke (around 85%) as compared to by-product ovens (D) Produces coke with very poor strength

Last Answer : (B) Takes 2-3 days for coking of coal but requires no external fuel for heating

Narrow coke ovens as compared to wider coke ovens (A) Produce smaller coke (B) Produce stronger coke (C) Require less time of carbonisation (D) All (A), (B) and (C)

Description : Narrow coke ovens as compared to wider coke ovens (A) Produce smaller coke (B) Produce stronger coke (C) Require less time of carbonisation (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Flue gas from the heating chamber of byproduct coke ovens is removed by (A) Forced draft fan (B) Induced draft fan (C) Steam ejector (D) Natural draft

Description : Flue gas from the heating chamber of byproduct coke ovens is removed by (A) Forced draft fan (B) Induced draft fan (C) Steam ejector (D) Natural draft

Last Answer : (D) Natural draft

Coke ovens in steel plant are heated by (A) Electricity (B) Coke oven gas (C) Mixed gas (D) Both (B) & (C)

Description : Coke ovens in steel plant are heated by (A) Electricity (B) Coke oven gas (C) Mixed gas (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C)

Heat penetration rate in narrow coke ovens in high temperature carbonisation of coal is around __________ cm/hr. (A) 2.5 (B) 0.5 (C) 10 (D) 20

Description : Heat penetration rate in narrow coke ovens in high temperature carbonisation of coal is around __________ cm/hr. (A) 2.5 (B) 0.5 (C) 10 (D) 20

Last Answer : (A) 2.5

Coking time in narrow by-product coke ovens is around __________ hours. (A) 18 (B) 48 (C) 8 (D) 80

Description : Coking time in narrow by-product coke ovens is around __________ hours. (A) 18 (B) 48 (C) 8 (D) 80

Last Answer : (A) 18

High rate of heating of coke ovens (A) May damage its walls due to abrupt excessive swelling of coal (B) Produces larger size coke (C) Increases the time of carbonisation (D) None of these

Description : High rate of heating of coke ovens (A) May damage its walls due to abrupt excessive swelling of coal (B) Produces larger size coke (C) Increases the time of carbonisation (D) None of these

Last Answer : (A) May damage its walls due to abrupt excessive swelling of coal

Undercharging of coal in the by-product coke ovens results in (A) Decrease in the c.v. of coke oven gas (B) Increase in its throughput (C) Increase in the c.v. of coke oven gas

Description : Undercharging of coal in the by-product coke ovens results in (A) Decrease in the c.v. of coke oven gas (B) Increase in its throughput (C) Increase in the c.v. of coke oven gas

Last Answer : (A) Decrease in the c.v. of coke oven gas

Compound coke ovens are those which can be heated by (A) Both steam and electrical power (B) Lean gas (e.g., B.F. gas) (C) Rich gas (e.g., coke oven gas) (D) Both (B) and (C)

Description : Compound coke ovens are those which can be heated by (A) Both steam and electrical power (B) Lean gas (e.g., B.F. gas) (C) Rich gas (e.g., coke oven gas) (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Coke made in narrower by-product coke ovens (as compared to wider ovens) is (A) Less reactive (B) Stronger (C) Smaller in size (D) All (A), (B) & (C)

Description : Coke made in narrower by-product coke ovens (as compared to wider ovens) is (A) Less reactive (B) Stronger (C) Smaller in size (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Preheating of coal charge for the coke ovens reduces the (A) Time of carbonisation (B) Yield of gas and tar(C) Fuel consumption in coking(D) All (A), (B) and (C)

Description : Preheating of coal charge for the coke ovens reduces the (A) Time of carbonisation (B) Yield of gas and tar (C) Fuel consumption in coking (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Presence of free moisture in coal during its high temperature carbonisation (A) Reduces the coking time (B) Protects the volatile products from pyrolysis (cracking) in the presence of hot coke and hot oven walls (C) Increases the loss of fine coal dust from the ovens when charging (D) None of these

Description : Presence of free moisture in coal during its high temperature carbonisation (A) Reduces the coking time (B) Protects the volatile products from pyrolysis (cracking) in the presence of hot coke and hot oven walls (C) Increases the loss of fine coal dust from the ovens when charging (D) None of these

Last Answer : (B) Protects the volatile products from pyrolysis (cracking) in the presence of hot coke and hot oven walls

Pick out the wrong statement. (A) Nitrogen is normally supplied in fertiliser either in Ammoniacal or the nitrate form, from which the soil takes it up in the form of ammonium ions ornitrate ions and forms amino acids(B) Calcium present in the fertiliser helps in correcting the soil acidity(C) Particle size range of a good granular fertiliser is 10-15 mesh and itcontains less moisture as compared to finely divided powder form of fertiliser(D) Ammonium nitrate fertiliser is obtained as a by-product in an integratedsteel plant having by-product coke ovens

Description : Pick out the wrong statement. (A) Nitrogen is normally supplied in fertiliser either in Ammoniacal or the nitrate form, from which the soil takes it up in the form of ammonium ions ornitrate ... nitrate fertiliser is obtained as a by-product in an integrated steel plant having by-product coke ovens

Last Answer : (D) Ammonium nitrate fertiliser is obtained as a by-product in an integrated steel plant having by-product coke ovens

Phenolic water generated in coke ovens & by-product plant attached to an integrated steel plant containing phenol in concentration of less than 100 mg/litre can be removed by (A) Chlorination (B) Treating in biological oxygen pond (C) Chemical coagulation (D) None of these

Description : Phenolic water generated in coke ovens & by-product plant attached to an integrated steel plant containing phenol in concentration of less than 100 mg/litre can be removed by (A) Chlorination (B) Treating in biological oxygen pond (C) Chemical coagulation (D) None of these

Last Answer : (B) Treating in biological oxygen pond

Phenolic water generated in coke ovens & by-product plant of a steel plant are disposed off by (A) Quenching of hot coke (B) Discharging in the river stream (C) Filtration and recycling for cooling coke oven gas (D) None of these

Description : Phenolic water generated in coke ovens & by-product plant of a steel plant are disposed off by (A) Quenching of hot coke (B) Discharging in the river stream (C) Filtration and recycling for cooling coke oven gas (D) None of these

Last Answer : (A) Quenching of hot coke

Maintain 850 OC for 1 hour (soaking time).  Cool the material to 60 OC in 4 hours. a) Calculate the efficiency of the furnace, if the specific heat of steel is 0.12 kcal/kgOC and fuel oil consumption per batch is 1400 litres.  GCV of fuel oil - 10200 kcal/kg,  Cost of fuel oil - Rs. 46,000/kL,  Sp. gr. of fuel oil - 0.92. b) Due to high cost of oil, the plant management decides to convert to a lower operating cost LPG fired furnace lined on the inside with ceramic fibre insulation and with an operating efficiency of 80%, for same requirement. The investment towards installation of the new furnace is Rs. 50 lakhs. Calculate the Return on Investment, if the plant operates two batches per day and 250 days in a year.  Cost of LPG - Rs. 75/kg,  GCV of LPG - 12500 kcal/kg.

Description : In a heat treatment shop, steel components are heat-treated in batches of 80 Tons. The  heat treatment cycle is as follows;  Increase temperature from 30 OC to 850 OC in 3 hours.  ... efficiency of 80%, for same requirement. The investment towards installation of  the new furnace is Rs. 50

Last Answer : Quantity of steel treated per batch - 80 Tons a. Efficiency of Furnace: Useful heat supplied to steel - 80000 x 0.12 x (850 - 30)   = 7872000 kcal/batch .1 mark Total heat ... = Rs. 64400/batch Efficiency of new LPG furnace - 80% Heat supplied in new LPG furnace - 7872000/0.8

. An example of a periodic furnace is the (A) Blast furnace stoves (B) Blast furnace (C) Coke oven heating chamber (D) Rotary kilns

Description : . An example of a periodic furnace is the (A) Blast furnace stoves (B) Blast furnace (C) Coke oven heating chamber (D) Rotary kilns

Last Answer : (A) Blast furnace stoves