Draw the symbol of GTO and TRIAC.

Draw the symbol of GTO and TRIAC.
by
retagged

1 Answer

Answer :

1) GTO:

image


2) TRIAC: 

image

by

Related questions

Draw a symbol and neat labeling V-I characteristics of GTO and explain its operation.

Description : Draw a symbol and neat labeling V-I characteristics of GTO and explain its operation.

Last Answer : Ans: Symbol and V-I characteristics of GTO: Operation of GTO: i) As the applied anode to cathode voltage is increased above zero, very small current (leakage current) flows through the device. ... low voltage (VBRR). The reverse breakdown voltage is of the order of 20 to 30 volt only. 

Draw symbol & V-I characteristics of (i) LASCR (ii) DIAC (iii) TRIAC

Description : Draw symbol & V-I characteristics of (i) LASCR (ii) DIAC (iii) TRIAC

Last Answer : (i) LASCR:  (ii) DIAC:  (iii) TRIAC: 

How GTO is advantages over SCR

Description : How GTO is advantages over SCR

Last Answer : i) It is turned-off by negative gate pulse. ii) No commutation circuit required, reducing the cost, size, weight and volume of the circuit. iii) As commutation choke is not used, the associated acoustic ... turn off time permits high switching frequency. v) It has higher di/dt rating at turn-off. 

Is gate turn on mechanism of GTO is similar to conventional thyristor?

Description : Is gate turn on mechanism of GTO is similar to conventional thyristor?

Last Answer : Yes gate turn on mechanism of GTO is similar to conventional thyristor.

How is the GTO turned off?

Description : How is the GTO turned off? A) By using a commutation circuit B) By applying reverse gate pulse C) By using a latch-up circuit D) By reverse anode current pulse 

Last Answer : How is the GTO turned off? A) By using a commutation circuit B) By applying reverse gate pulse C) By using a latch-up circuit D) By reverse anode current pulse 

basic gate drive circuit of GTO

Description : basic gate drive circuit of GTO

Last Answer : basic gate drive circuit of GTO

what is gate turn off thyristor (GTO)?

Description : Draw the structural diagram of GTO. Explain briefly the switching behavior of GTO with the help of appropriate voltage and current waveform.

Last Answer : Gate Turn Off Thyristor (GTO) Conventional Thyristor can be turned on with gate terminal but can not turn off from gate terminal. But in case of Gate Turn Off Thyristor (GTO), we can turn it on and off ... subdivided as storage period (Ts), fall period (Tp) and tail period (Tt).

With neat sketch explain four modes of operation of a TRIAC?

Description : With neat sketch explain four modes of operation of a TRIAC? 

Last Answer : Modes of operation of a TRIAC: There are four different operating modes of TRIAC:  1) MT2 and gate are positive with respect to terminal MT1(Mode1) : Here terminal MT2 is positive ... junction P2-N2 is forward biased, current carriers are injected and therefore, the TRIAC is turned on. 

Speed control of the motor using TRIAC

Description : Speed control of the motor using TRIAC

Last Answer : Speed control of the motor using TRIAC:  This basic phase triggering circuit uses the triac in series with the motor across an AC sinusoidal supply. The variable resistor, VR1 is used ... meaning that it may not trigger at the exact same point for each positive and negative half cycle.

Compare SCR and TRIAC

Description : Compare SCR and TRIAC

Last Answer : SCR TRIAC It is an unidirectional device. It is a bidirectional device. It is turned-on by only positive gate current. It can be turned-on by either ... applications including lamp dimmer, heating control, zero voltage switched AC relay, small AC motor control etc.

SCR is more utilized as compared to Triac because it is

Description : SCR is more utilized as compared to Triac because it is

Last Answer : SCR is more utilized as compared to Triac because it is available with higher ratings

Can we use triac in multiquadrant chopper?

Last Answer : Yes, we can use triac in the multi-quadrant chopper.

Describe triggering circuit for TRIAC using DIAC.

Description : Describe triggering circuit for TRIAC using DIAC.

Last Answer : Triggering circuit for TRIAC using DIAC: DIAC stands for diode alternating current. It's a two terminal four layer bidirectional device. It conducts in both directions. DIAC is used for triggering TRIAC. ... of DIAC to the gate terminal of TRIAC reduces the harmonics.

how can we turn on and turn off GTO?

Last Answer : GTO can be turned on by providing positive pulse to the gate terminal and it can be turn off by providing negative pulse to gate terminal.

What is TRIAC?

Description : What is TRIAC?

Last Answer : TRIAC Structure:  Operating Principle: A triac is a three terminal, five layer semiconductor device. It is equivalent to two separate SCRs connected in anti-parallel with gates common. ... for electric fans and other electric motors. v. Heating control vi. Zero voltage switched relay

Triac are usually operated at:

Description : Triac are usually operated at:

Last Answer : Triac are usually operated at: power frequency

A triac is a device which acts as a

Description : A triac is a device which acts as a  A) Diode in forward direction and thrylistor in the reverse direction B) Thyristor in both directions C) Diode in both directions D) Thyristor in forward direction and diode in reverse direction

Last Answer : A triac is a device which acts as a Thyristor in both directions

How much did a 1969 Pontiac gto cost in 1969?

Description : How much did a 1969 Pontiac gto cost in 1969?

Last Answer : What is the answer ?

HOW CAN I FIND IF A 69' GTO IS A JUDGE?

Description : HOW CAN I FIND IF A 69' GTO IS A JUDGE?

Last Answer : SERIAL # IS 242379A128266 IS IT A JUDGE

How much should a used 2006 GTO sell for?

Description : How much should a used 2006 GTO sell for?

Last Answer : The amount you will get for a used 2006 Pontiac GTO depends on a number of factors, including year and wear/tear. The average price range is between $10,000 and $15,000; you can check this price by using www.kbb.com.

What year did Pontiac come out with the GTO?

Description : What year did Pontiac come out with the GTO?

Last Answer : Pontiac GTO. The Pontiac GTO is an automobile that was manufactured by American automobile manufacturer Pontiac from the 1964 to 1974 model years, and by GM's subsidiary Holden in Australia from the 2004 to ... . The first generation of the GTO was a muscle car produced in the 1960s and the 1970s

What are the advantages of GTO over SCR?

Description : What are the advantages of GTO over SCR?

Last Answer : a. Elimination of commutation of commutating components in forced commutation, resulting in reduction in cost, weight and volume. b. Reduction in acoustic noise and electromagnetic noise due to ... turn-off, permitting high switching frequencies. d. Improved efficiency of the converters.

What is the difference between Silicon Controlled Switch (SCS) and Gate Turn-off Switch (GTO)?

Description : What is the difference between Silicon Controlled Switch (SCS) and Gate Turn-off Switch (GTO)?

Last Answer : Ans-scs is nothing but it is the silicon controlled switch as an SCR but gate turn off is that in which one of the turnoff method of SCR

A modern power semiconductor device IGBT is combines the characteristics of a) BJT and MOSFET b) FCT and GTO c) SCR and MOSFET d) SCR and BJT

Description : A modern power semiconductor device IGBT is combines the characteristics of a) BJT and MOSFET b) FCT and GTO c) SCR and MOSFET d) SCR and BJT

Last Answer : Ans: BJT and MOSFET

Consider the following statements with regard to a GTO : 1. The turn-off gain of the GTO is large....

Description : Consider the following statements with regard to a GTO : 1. The turn-off gain of the GTO is large. 2. Large negative gate current pulses are required to turn off the GTO. 3. GTO has large reverse blocking capability. Which of the ... is/are correct ? (a) 1 only (b) 2 only (c) 3 only (d) 1, 2 and 3

Last Answer : Consider the following statements with regard to a GTO : 1. The turn-off gain of the GTO is large. 2. Large negative gate current pulses are required to turn off the GTO. 3. GTO has large reverse blocking capability. Which of ... is/are correct ? (a) 1 only (b) 2 only (c) 3 only (d) 1, 2 and 3

Figure 'D' shown in the illustration represents a/an ____________. EL-0078 A. DIP IC chip B. integrated diac/triac envelope C. TO-5 flat pack D. 7-segment BCD display

Description : Figure 'D' shown in the illustration represents a/an ____________. EL-0078 A. DIP IC chip B. integrated diac/triac envelope C. TO-5 flat pack D. 7-segment BCD display

Last Answer : Answer: A

A triac thyristor functions as a control device and is basically ________________. A. two NPN transistors in parallel with a common base lead B. a diode in series with a temperature sensitive capacitor C. two back-to-back SCR's with a common gate lead D. a triode tube with an extra heavy grid element

Description : A triac thyristor functions as a control device and is basically ________________. A. two NPN transistors in parallel with a common base lead B. a diode in series with a temperature sensitive capacitor C. two ... -back SCR's with a common gate lead D. a triode tube with an extra heavy grid element

Last Answer : Answer: C

Figure 'A' of the diagram shown in the illustration represents a/an ____________. EL-0078 A. silicon controlled rectifier B. IG or MOS field effect transistor C. triac thyristor D. junction field effect transistor

Description : Figure 'A' of the diagram shown in the illustration represents a/an ____________. EL-0078 A. silicon controlled rectifier B. IG or MOS field effect transistor C. triac thyristor D. junction field effect transistor

Last Answer : Answer: B

When used for ac current control, during which alternation of the ac cycle does the TRIAC control current flow?

Description : When used for ac current control, during which alternation of the ac cycle does the TRIAC control current flow?

Last Answer : During both alternations.

The TRIAC is similar in operation to what device?

Description : The TRIAC is similar in operation to what device?

Last Answer : SCR

When a Triac is properly gated, what is/are the direction(s) of current flow between anodes 1 and 2?

Description : When a Triac is properly gated, what is/are the direction(s) of current flow between anodes 1 and 2?

Last Answer : Current is allowed to flow in either direction.

TRIAC

Description : What is TRIAC ?

Last Answer : TRIAC is three terminal semiconductor device for controlling current. TRIAC is bidirectional device. TRIAC is use for AC switching applications because it can control the current flow over both halves of ... as convenient for some high power applications where its switching is more difficult.

A Triac is a - - - power switch

Last Answer :  A Triac is a Bi-directional power switch

A Triac has - - - terminals

Last Answer : A Triac has Three terminals

Draw the circuit diagram of battery charger using SCR and explain it’s working.

Description : Draw the circuit diagram of battery charger using SCR and explain it’s working.

Last Answer : Battery charger circuit using SCR: The figure shows the battery charger circuit using SCR. A 12V discharged battery is connected in the circuit and switch SW is closed. The singlephase 230V ... not fired. In this way, after full charging, further charging is automatically stopped.

Draw single phase full wave mid-point converter for inductive load. Draw input and output waveforms for it.

Description : Draw single phase full wave mid-point converter for inductive load. Draw input and output waveforms for it. 

Last Answer : Circuit Diagram: Waveforms:

Draw circuit diagram of symmetrical configuration of bridge converter.

Description : Draw circuit diagram of symmetrical configuration of bridge converter.

Last Answer : circuit diagram of symmetrical configuration of bridge converter

Draw circuit diagram of Class B commutation.

Description : Draw circuit diagram of Class B commutation.

Last Answer : Class B: Resonant Pulse Commutation:

Draw full bridge & half bridge configuration with common cathode.

Description : Draw full bridge & half bridge configuration with common cathode.

Last Answer : Half Bridge Configuration: Full Bridge Configuration: 

Draw construction of IGBT.

Description : Draw construction of IGBT.

Last Answer : construction of IGBT

Explain auxiliary commutation with a neat diagram. Also draw its waveform.

Description : Explain auxiliary commutation with a neat diagram. Also draw its waveform.

Last Answer : Auxiliary Commutation At start, the Ta is triggered and turned on to carry the load current. Due to the resonant circuit R-L-C, the current initially rises, attains peak and then falls to ... , the firing of auxiliary SCR commutates the main SCR, hence name is auxiliary commutation.

Give the operation of single phase full wave bridge controlled converter with RL load with a neat diagram. Also draw its waveform.

Description : Give the operation of single phase full wave bridge controlled converter with RL load with a neat diagram. Also draw its waveform.

Last Answer : Single phase fully control bridge converter with RL load: 1. During positive half cycle of input voltage, T1 and T2 are forward biased and during negative half cycle, T3 and T4 are forward biased. Therefore, T1-T2 ... cycle till the firing of next pair of SCRs as shown in the waveform.

Draw a neat labelling V-I characteristics of SCR and explain the region

Description : Draw a neat labelling V-I characteristics of SCR and explain the region

Last Answer : (i) Latching current: It is the minimum anode current required to maintain the SCR in the conduction state just after turn-on and the gate signal has been removed.  (ii) Holding current: It is the minimum anode current required to hold the conducting SCR in the ON state. 

Draw a neat diagram of 1Ф half wave controlled converter with RL load. Give its operation.

Description : Draw a neat diagram of 1Ф half wave controlled converter with RL load. Give its operation.

Last Answer : Single phase fully controlled half wave converter:  The circuit diagram of single-phase half-wave controlled rectifier with RL load and without freewheeling diode is shown in Fig. (a). The SCR T is ... , when again pulse is applied, the SCR is turned on & the above cycle is repeated. 

Draw construction of SCR using two transistor model. Explain its operation.

Description : Draw construction of SCR using two transistor model. Explain its operation.

Last Answer : Two Transistor Model of SCR or Thyristor

Draw the V-I characteristics of power transistor.

Description : Draw the V-I characteristics of power transistor. 

Last Answer : V-I characteristics of power transistor:

Draw symbol of (i) Tray Dryer (ii) Plate column (iii) Packed column (iv) Jaw crusher (v) Strirrer (vi) Ball mill.

Description : Draw symbol of (i) Tray Dryer (ii) Plate column (iii) Packed column (iv) Jaw crusher (v) Strirrer (vi) Ball mill.

Last Answer : i)Tray dryer:   ii)Plate column:    iii)Packed column:   iv) Jaw crusher:   v) Stirrer:   vi) Ball mill  

Draw Conventional symbol for i) Embankment ii) Pond or Lake iii) Tunnel iv) Compound Wall

Description : Draw Conventional symbol for i) Embankment ii) Pond or Lake iii) Tunnel iv) Compound Wall

Last Answer : Conventional symbol for i) Embankment ii) Pond or Lake iii) Tunnel iv) Compound Wall

Draw conventional symbol for: i. Cutting ii. Road with bridge iii. Orchard iv. river

Description : Draw conventional symbol for: i. Cutting ii. Road with bridge iii. Orchard iv. river

Last Answer : conventional symbol for: i. Cutting ii. Road with bridge iii. Orchard iv. river

Draw symbol and state one application of zener diode and LED.

Description : Draw symbol and state one application of zener diode and LED.

Last Answer : Diagram: Application of Zener diode:  It is used as voltage regulator. Used in protection circuits for MOSFET. Used in pulse amplifier. Used in clipping circuits. ... alarm systems 7-segment, 16- segment and dot matrix displays Indicating power ON/OFF conditions