Description : In a general two dimensional stress system, planes of maximum shear stress are inclined at ___ with principal planes. a. 90 degree b. 180 degree c. 45 degree d. 60 degree
Last Answer : c. 45 degree
Description : All the principal strains are at an angle of (a) 45 0 (b) 90 0 (c) 135 0 (d) None
Last Answer : (b) 90 0
Description : All the principal stresses are at an angle of (a)90 0 (b) 45 0 (c) 135 0 (d) None
Last Answer : (a)90 0
Description : The angle between a principal plane and a plane of maximum shear is a. 30 0 b. 60 0 c. 90 0 d. None
Last Answer : d. None
Description : All the principal stresses are at an angle of (a) 45 0 (b) 60 0 (c) 75 0 (d) None
Last Answer : (d) None
Description : In a general two dimensional stress system, there are a. Two principal planes b. Only one plane c. Three principal planes d. No principal plane
Last Answer : a. Two principal planes
Description : Principal planes are those planes on which a. Normal stress is maximum b. Normal stress is minimum c. Normal stress is either maximum or minimum d. Shear stress is maximum
Last Answer : c. Normal stress is either maximum or minimum
Description : There are in all (a) Two principal planes (b) Three principal planes (c) Four principal planes (d) None
Last Answer : (b) Three principal planes
Description : What is the relationship in degrees of the electrostatic and electromagnetic fields of an antenna? A. 0 degree B. 45 degrees C. 90 degrees D. 180 degrees
Last Answer : C. 90 degrees
Description : Find the area of a right angled triangle with sides of 90 degree unit and the functions described by L = cos y and M = sin x. a) 0 b) 45 c) 90 d) 180
Last Answer : d) 180
Description : The angle between a principal plane and a plane of maximum shear is a. 15 0 b. 45 0 c. 75 0 d. None
Last Answer : b. 45 0
Description : When two forces acting at a point are such that if the direction of one is reversed, the direction of the resultant is turned through a right angle, the forces must be a.inclined at more than 90? b.inclined at less than 90? c.equal in magnitude d.acting at 180? e.107 dynes
Last Answer : c. equal in magnitude
Description : All the maximum shear stresses are at an angle of (a)45 0 (b) 90 0 (c) 135 0 (d) None
Description : The maximum tangential stress σ t = (σ x sin 2θ)/2 is maximum if, θ is equal to ________ a. 45 o b. 90 o c. 270 o d. all of the above
Last Answer : a. 45 o
Description : Which of the following formulae is used to calculate tangential stress, when a member is subjected to stress in mutually perpendicular axis and accompanied by a shear stress? a. [(σ x - σ y )/2 ]sin θ - τ cos 2θ b. [(σ x - ... τ cos 2θ c. [(σ x - σ y )/2 ]sin θ - τ 2 cos θ d. None of the above
Last Answer : c. [(σ x – σ y )/2 ]sin θ – τ 2 cos θ
Description : Through a point in a loaded soil mass, there exists typical planes mutually orthogonal on which the stress is wholly normal and no shear stress acts, if is (A) 1 (B) 2 (C) 3 (D) 4
Last Answer : Answer: Option C
Description : Involute splines have stub teeth with a pressure angle of ___ a) 30 b) 45 c) 60 d) Can’t be determined
Last Answer : b) 45
Description : The angle at which the wave must be transmitted in air media if the angle of reflection is 45 degree is a) 45 b) 30 c) 60 d) 90
Last Answer : a) 45
Description : Maximum allowable spacing of shear reinforcement for inclined stirrups with an inclination of 45° is restricted to [ A ] 0.75 d [ B ] 0.45 d [ C ] 0.90 d [ D ] d
Last Answer : [ D ] d
Description : Ellipse of stress is used to find a. Resultant stress on any plane in a bi-axial stress system b. Resultant stress on any plane in a general two dimensional system c. Maximum shear stress d. Location of planes of maximum shear stress
Last Answer : a. Resultant stress on any plane in a bi-axial stress system
Description : Angle of obliquity is defined as a. Angle between the plane on which stresses are evaluated and one of the given planes b. Angle between resultant stress and the plane of given normal stress c. Angle between resultant stress and shear stress d. Angle between resultant stress and normal stress
Last Answer : d. Angle between resultant stress and normal stress
Description : On the planes of maximum shear, there are (a) Normal stresses (b) Bending stresses (c) Bucking stresses (d) None
Last Answer : (a) Normal stresses
Description : The prime mover of an AC two pole main propulsion generator drives the generator at 3600 RPM. If the main propulsion motor has 80 poles, what will be the propeller speed? A. 45 RPM B. 80 RPM C. 90 RPM D. 180 RPM
Last Answer : Answer: C
Description : The negative sign in expression ɛ= -vBL shows that the angle between the direction of L and (v x B) is: a. 90 b. 180 c. 45 d. 0
Last Answer : a. 90
Description : In an electromagnetic wave, what is the relative orientation of the magnetic and electric fields? w) 180 degrees x) 90 degrees y) 45 degrees z) 22.5 degrees
Last Answer : ANSWER: X -- 90 DEGREES
Description : Cotter joints is connected two ......... roads. A. Co - axial B. Parallel C. Perpendicular D. Inclined
Last Answer : A. Co - axial
Description : A force 2P is acting on the double transverse fillet weld. Leg of weld is h and length l. Determine the shear stress in a plane inclined at θ with horizontal. a) PSinθ(Sinθ+Cosθ)/hl b) P(Sinθ+Cosθ)/hl c) Pcosθ(Sinθ+Cosθ)/hl d) None of the listed
Last Answer : a) PSinθ(Sinθ+Cosθ)/hl
Description : Complementary shear stress is a. Parallel to applied stress b. Perpendicular to the applied shear stress c. Inclined to the applied shear stress d. None
Last Answer : b. Perpendicular to the applied shear stress
Description : The direction of projection for the range of a projectile to be maximum on an inclined plane having angle of inclination 30? to the horizontal, whould be a.45? with horizontal b.30? with vertical c.30? with horizontal d.60? with inclined plane e.45? with inclined plane
Last Answer : b. 30? with vertical
Description : What will be the frequency of a three-phase, six pole, AC generator operating at 1800 revolutions per minute? A. 60 hertz B. 90 hertz C. 120 hertz D. 180 hertz
Last Answer : Answer: B
Description : Revenue from services with duration of not more than……….. days to be recognized when rendering of services under contract is completed or substantially complted. a) 60 days b) 90 days c) 120 days d) 180 days
Last Answer : b) 90 days
Description : A light ray traveling in benzene strikes the benzene-air surface at the critical angle. The angle of refraction of the light ray is: w) 30 degrees x) 60 degrees y) 90 degrees z) 180 degrees
Last Answer : ANSWER: Y -- 90 DEGREES
Description : The missing number in the series 40, 120, 60, 180, 90, ?, 135 is (A) 110 (B) 270 (C) 105 (D) 210
Description : n single action disc harrow the two gangs are at set single a) less than 90 degree b) at 90 degree c) greater than 90 degree d) at 180 degree
Last Answer : c) greater than 90 degree
Description : A sphere rolls down on two inclined planes of different angles but same height, it does so – (1) in the same time (2) with the same speed (3) in the same time with the same speed (4) in the same time with the same kinetic energy
Last Answer : (2) with the same speed Explanation: The velocity of the sphere at the bottom depends only on height and acceleration due to gravity. Both these values are constants. Therefore, the velocity at the bottom ... . The kinetic energy will be the same. What will differ is time taken to reach the bottom.
Description : Worm gear are used for transmitting power between two Shaft Inclined at e. At right angle to each other and axes can intersect f. At right angle to each other but axis cannot intersect each other g. At right angle to each other and in different planes h. None of the above
Last Answer : f. At right angle to each other but axis cannot intersect each other
Description : A sphere rolls down on two inclined planes of different angles but same height, it does so (1) in the same time (2) with the same speed (3) in the same time with the same speed (4) in the same time with the same kinetic energy
Last Answer : with the same speed
Description : Nesha scored 120 out of 150 in English, 120 out of 180 in mathematics and 160 out of 200 in Science. Find Nesha’s score as percentage: (i) in Mathematics (ii) in all the three subjects (on the whole). a) 66 2/3, 78 22/51 b) 71 23/5, 45 7/31 c) 54 13/33, 82 3/4 d) 60 3/4, 76 32/41
Last Answer : Answer: A (i) Percentage scored in Mathematics = 120/180 100 = 12000/180 =1200/18 = 66 2 /3 % (ii) Total maximum of all the three subjects = 150 + 160 + 200 = 510 and Total score in the ... percentage on the whole = (400/510 100) = (40000/510) = 4000/51 = 78 22/51 %
Description : A transmission shaft subjected to pure bending moment should be designed on the basis of (A) Maximum principal stress theory (B) Maximum shear stress theory (C) Distortion energy theory (D) Goodman or Soderberg diagrams
Last Answer : (A) Maximum principal stress theory
Description : For a homogeneous & isotropic body under hydrostatic pressure, which theory of elastic failure does not fail (a) Firstly Maximum Principal Theory (b) Secondly Maximum Shear Stress Theory (c) Thirdly Maximum Principal Energy Theory (d) None
Last Answer : (a) Firstly Maximum Principal Theory
Description : For a homogeneous & isotropic body under hydrostatic pressure, which theory of elastic failure fails (a) Firstly Maximum Principal Theory (b) Secondly Maximum Principal strain Theory (c) Thirdly Maximum Principal Energy Theory (d) None
Last Answer : (c) Thirdly Maximum Principal Energy Theory
Description : Under complex loading, principal stresses exist as (a) Firstly σ 1 > σ 2 =σ 3 (b) Secondly σ 1 = σ 2 =σ 3 (c) Thirdly σ 1 > σ 2 < σ 3 (d) None
Description : Under complex loading, if elastic limit reaches in tension, then failure occurs due to (a) Firstly Maximum principal strain theory (b) Secondly Maximum principal theory of strain energy (c) Thirdly Maximum Principal stress theory (d) None
Last Answer : (c) Thirdly Maximum Principal stress theory
Description : Under complex loading, if elastic limit reaches in tension, then failure occurs due to (a) Firstly Maximum principal strain theory (b) Secondly Maximum principal theory of strain energy (c) Thirdly Maximum shear stress theory (d) None
Description : A ductile material may not meet a failure if it has been tested for the theories of failure (a) Firstly Maximum Principal Theory (b) Secondly Maximum Principal Strain Theory (c) Thirdly Maximum principal strain energy theory (d) None
Description : Maximum principal strain is equal to when σ1 and σ2 are tensile (a) (σ1 –μσ2)/E (b) (σ1 + μσ2)/E (c) (–σ1 –μσ2)/E (d) None
Last Answer : (a) (σ1 –μσ2)/E
Description : Maximum principal strain theory is also called as (a) Guest’s theory (b) Haigh theory (c) St.Venant’s theory (d) None
Last Answer : (c) St.Venant’s theory