The coating chemical used to coat paper in the final stage of manufacturing paper is

The coating chemical used to coat paper in the final stage of manufacturing paper is
by

1 Answer

Answer :

Calcium carbonate or china clay.
by

Related questions

Hollander beater' machine used in the paper manufacturing plant does not accomplish the task of (A) Final rolling out of paper (B) Cutting of fibres (C) Hydration of fibres (D) Fibrillation of fibre

Description : Hollander beater' machine used in the paper manufacturing plant does not accomplish the task of (A) Final rolling out of paper (B) Cutting of fibres (C) Hydration of fibres (D) Fibrillation of fibre

Last Answer : (A) Final rolling out of paper

Which is the best Synthetic Enamel Paint & Coating Manufacturing Company in Ahmedabad?

Description : Which is the best Synthetic Enamel Paint & Coating Manufacturing Company in Ahmedabad?

Last Answer : Angel Coating is offering high quality & affordable Synthetic Enamel Paints . Synthetic Enamel Paints is a long-lasting, Glossy, solvent-based paint for interior surface only. It can be applied ... cabinets, and on mild steel surfaces like grills, steel furniture, collapsible gates, shutters, etc.

Select the correct statement. (A) Quantity of binder required for tack coat is less than that required for prime coat (B) Prime coat treatment is given for plugging the voids in water bound macadam during bituminous road construction (C) Seal coat is the final coat over certain previous bituminous pavements (D) A bitumen primer is a high viscosity cutback

Description : Select the correct statement. (A) Quantity of binder required for tack coat is less than that required for prime coat (B) Prime coat treatment is given for plugging the voids in water ... the final coat over certain previous bituminous pavements (D) A bitumen primer is a high viscosity cutback

Last Answer : Answer: Option D

The substance used in coating paper is

Description : The substance used in coating paper is

Last Answer : calcium carbonate or china clay.

What paper has an adhesive coating that is protected by a strip of brown waxed paper?

Description : What paper has an adhesive coating that is protected by a strip of brown waxed paper?

Last Answer : M9 paper

77 The transformer laminations are insulated from each other by A. Mica strip B. Thin coat of varnish C. Paper D. Any of the above

Description : 77 The transformer laminations are insulated from each other by A. Mica strip B. Thin coat of varnish C. Paper D. Any of the above

Last Answer : B. Thin coat of varnish

The final acid obtained during the manufacturing of `H_(2)SO_(4)` by contact process is

Description : The final acid obtained during the manufacturing of `H_(2)SO_(4)` by contact process is

Last Answer : The final acid obtained during the manufacturing of `H_(2)SO_(4)` by contact process is A. `H_(2)SO_(4)` (conc.) ... (dil) C. HCl D. `H_(2)S_(2)O_(7)`

A student has been collecting silver coins and copper coins. One day she observes a black coating on silver coins and a green coating on copper coins. Which chemical phenomenon is responsible for these coatings? Write the names of black and green coatings.

Description : A student has been collecting silver coins and copper coins. One day she observes a black coating on silver coins and a green coating on copper coins. Which chemical phenomenon is responsible for these coatings? Write the names of black and green coatings.

Last Answer : The phenomenon is called corrosion. Silver gets tarnished when exposed to atmosphere which forms a black coating of silver oxide. Copper forms a green deposit on its surface when exposed to moist air. The green coating is copper sulphate.

A metal ‘X’ acquires a green colour coating on its surface on exposure to air. (i) Identify the metal ‘X’ and name the process responsible for this change. (ii)Name and write chemical formula of the green coating formed on the metal. (iii) List two important methods to prevent the process. -Chemistry

Description : A metal X' acquires a green colour coating on its surface on exposure to air. (i) Identify the metal X' and name the process responsible for this change. (ii)Name and write chemical ... the green coating formed on the metal. (iii) List two important methods to prevent the process. -Chemistry

Last Answer : (i) Metal is copper. The process is corrosion. (ii)Basic copper carbonate [CuCO3.Cu(0H)2]. (iii) • It should be coated with tin • It should be mixed with other metals to form alloys.

When A bronze statue develops a green coating (patina) over time is physical change or chemical?

Description : When A bronze statue develops a green coating (patina) over time is physical change or chemical?

Last Answer : This is a chemical change.

Coating of solid waste with impervious material is known as – (1) Encapsulation (2) Chemical fixation (3) Landfill (4) Capping

Description : Coating of solid waste with impervious material is known as – (1) Encapsulation (2) Chemical fixation (3) Landfill (4) Capping

Last Answer : (1) Encapsulation Explanation: Containment of toxic or hazardous constituents in industrial solid wastes is currently being accomplished using: (i) coating grains of waste material with an ... coating blocks of waste material with an inert, non-reactive impervious material (macroencapsulation).

What is the chemical name of the nonstick coating on cookware?

Description : What is the chemical name of the nonstick coating on cookware?

Last Answer : ANSWER: POLYTETRAFLOUROETHYLENE

Coating of solid waste with impervious material is known as (1) Encapsulation (2) Chemical fixation (3) Landfill (4) Capping

Description : Coating of solid waste with impervious material is known as (1) Encapsulation (2) Chemical fixation (3) Landfill (4) Capping

Last Answer : Encapsulation

What part of the manufacturing process relate to each stage of the process and to the process as a whole? a) field service b) design c) distribution d) project management

Description : What part of the manufacturing process relate to each stage of the process and to the process as a whole? a) field service b) design c) distribution d) project management

Last Answer : d) project management

Which stage of the manufacturing process has been described as “the mapping of function onto form”? a) Design b) Distribution c) Project management d) Field service

Description : Which stage of the manufacturing process has been described as “the mapping of function onto form”? a) Design b) Distribution c) Project management d) Field service

Last Answer : a) Design

Which of the following is not Solid-based RP system? a.Laminated Object Manufacturing (LOM) b.Paper Lamination Technology (PLT) c.Electron Beam Melting (EBM) d.Fused Deposition Modeling (FDM)

Description : Which of the following is not Solid-based RP system? a.Laminated Object Manufacturing (LOM) b.Paper Lamination Technology (PLT) c.Electron Beam Melting (EBM) d.Fused Deposition Modeling (FDM)

Last Answer : c.Electron Beam Melting (EBM)

Which of the following places are known for paper manufacturing industry? 1) Yamunanagu 2) Guwahati 3) Shahabad 4) Ballarpur Choose the correct answer using the codes given below: Codes: (a) 1, 2 and 3 (b) 1, 2 and 4 (c) 1, 3 and 4 (d) 2, 3 and 4

Description : Which of the following places are known for paper manufacturing industry? 1) Yamunanagu 2) Guwahati 3) Shahabad 4) Ballarpur Choose the correct answer using the codes given below: Codes: (a) 1, 2 and 3 (b) 1, 2 and 4 (c) 1, 3 and 4 (d) 2, 3 and 4

Last Answer : Ans: (b)

The product used for manufacturing of Industrial alcohol is- (1) Khandasari (2) Bagasse (3) Molasses (4) Paper-pulp

Description : The product used for manufacturing of Industrial alcohol is- (1) Khandasari (2) Bagasse (3) Molasses (4) Paper-pulp

Last Answer : (3) Molasses Explanation: Molasses is a viscous by-product of the beating of sugarcane, grapes or sugar beets into sugar. Blackstrap molasses is a source of calcium, magnesium, potassium, and iron; ... It is used in the manufacture of ethyl alcohol for industry and as an ingredient in cattle feed.

Bagasse, a by-product of sugar manufacturing industry, is used for the production of - (1) Glass (2) Paper (3) Rubber (4) Cement

Description : Bagasse, a by-product of sugar manufacturing industry, is used for the production of - (1) Glass (2) Paper (3) Rubber (4) Cement

Last Answer : (2) Paper

In a manufacturing plant, following data are gathered for a given month: Production - 1200 pieces; specific energy consumption - 1000 kWh/piece; variable energy consumption - 950 kWh/piece. The fixed energy consumption of the plant for the month Paper 1 –Set A with Solutions _______________________ Bureau of Energy Efficiency 6 is ------- a) 6,000 kWh b)10,000 kWh c) 12,000 kWh d) 60,000 kWh

Description : In a manufacturing plant, following data are gathered for a given month: Production - 1200 pieces; specific energy consumption - 1000 kWh/piece; variable energy consumption - 950 kWh/piece. The fixed energy consumption of the plant ... ----- a) 6,000 kWh b)10,000 kWh c) 12,000 kWh d) 60,000 kWh

Last Answer : d) 60,000 kWh

The final stage of the cell cycle, during which the cytoplasm divides, is called .?

Description : The final stage of the cell cycle, during which the cytoplasm divides, is called .?

Last Answer : cytoplasm

For a two stage compressor, the ratio of diameter of low pressure cylinder to high pressure cylinder is equal to A. Square of the ratio of final pressure to initial pressure B. The ratio of final pressure to initial pressure C. The square root of the ratio of final pressure to initial pressure D. Cube root of the ratio of final pressure to initial pressure

Description : For a two stage compressor, the ratio of diameter of low pressure cylinder to high pressure cylinder is equal to A. Square of the ratio of final pressure to initial pressure B. The ratio of ... final pressure to initial pressure D. Cube root of the ratio of final pressure to initial pressure

Last Answer : ANSWER : C

VAT is imposed: (1) Directly on Consumer (2) On first stage of production (3) On final stage of production (4) On all stages between production and sale

Description : VAT is imposed: (1) Directly on Consumer (2) On first stage of production (3) On final stage of production (4) On all stages between production and sale

Last Answer : (4) On all stages between production and sale Explanation: Value Added Tax (VAT) is imposed on the value added to each commodity by a firm during all stages of production and distribution. In ... introduced as an indirect value added tax (VAT) into the Indian taxation system from 1 April 2005.

What is known as the final stage in the evolution of the GSM standard? A. WAP B. GPRS C. EDGE D. Bluetooth

Description : What is known as the final stage in the evolution of the GSM standard? A. WAP B. GPRS C. EDGE D. Bluetooth

Last Answer : C. EDGE

When measuring a transmitter’s frequency against a suitable standard, the frequency to be measured is taken from the A. oscillator stage B. intermediate amplifier C. buffer stage D. final RF stage

Description : When measuring a transmitter’s frequency against a suitable standard, the frequency to be measured is taken from the A. oscillator stage B. intermediate amplifier C. buffer stage D. final RF stage

Last Answer : D. final RF stage

The final stage in Strategic Management is Strategy implementation

Description : The final stage in Strategic Management is Strategy implementation

Last Answer : False

The final stage of the selling process is the 1. closing 2. trial close 3. presentation 4. follow-up 5. overcoming of objection

Description : The final stage of the selling process is the 1. closing 2. trial close 3. presentation 4. follow-up 5. overcoming of objection

Last Answer : follow-up

The final stage in the development of an advertising campaign is 1. creating the advertising platform 2. developing the media plan 3. creating the advertising message 4. evaluating the effectiveness of advertising 5. none of these

Description : The final stage in the development of an advertising campaign is 1. creating the advertising platform 2. developing the media plan 3. creating the advertising message 4. evaluating the effectiveness of advertising 5. none of these

Last Answer : evaluating the effectiveness of advertising

A two stage compressor is used to compress an ideal gas. The gas is cooled to the initial temperature after each stage. The intermediate pressure for the minimum total work requirement should be equal to the __________ mean of P1 and P2.(where, P1 and P2 are initial and final pressures respectively) (A) Logarithmic (B) Arithmetic (C) Geometric (D) Harmonic

Description : A two stage compressor is used to compress an ideal gas. The gas is cooled to the initial temperature after each stage. The intermediate pressure for the minimum total work requirement should be equal to ... final pressures respectively) (A) Logarithmic (B) Arithmetic (C) Geometric (D) Harmonic

Last Answer : (C) Geometric

During which stage or phase of bone healing after fracture is devitalized tissue removed and new bone reorganized into its former structural arrangement? a) Remodeling Remodeling is the final stage of fracture repair. b) Inflammation During inflammation, macrophages invade and debride the fracture area. c) Revascularization Revascularization occurs within about 5 days after the fracture. d) Reparative Callus formation occurs during the reparative stage but is disrupted by excessive motion at the fracture site.

Description : During which stage or phase of bone healing after fracture is devitalized tissue removed and new bone reorganized into its former structural arrangement? a) Remodeling Remodeling is the final stage of ... occurs during the reparative stage but is disrupted by excessive motion at the fracture site.

Last Answer : a) Remodeling Remodeling is the final stage of fracture repair.

During which stage or phase of bone healing after fracture does callus formation occur? a) Reparative Callus formation occurs during the reparative stage but is disrupted by excessive motion at the fracture site b) Remodeling Remodeling is the final stage of fracture repair during which the new bone is reorganized into the bone’s former structural arrangement. c) Inflammation During inflammation, macrophages invade and debride the fracture area. d) Revascularization Revascularization occurs within about 5 days after the fracture.

Description : During which stage or phase of bone healing after fracture does callus formation occur? a) Reparative Callus formation occurs during the reparative stage but is disrupted by excessive motion ... the fracture area. d) Revascularization Revascularization occurs within about 5 days after the fracture.

Last Answer : a) Reparative Callus formation occurs during the reparative stage but is disrupted by excessive motion at the fracture site

What type of klystron is used as the final stage of a power- amplifier transmitter?

Description : What type of klystron is used as the final stage of a power- amplifier transmitter?

Last Answer : Multicavity klystron.

What type of klystron is used as the final stage of a power- amplifier transmitter?

Description : What type of klystron is used as the final stage of a power- amplifier transmitter?

Last Answer : Multicavity klystron.

What is the final stage of a transmitter?

Description : What is the final stage of a transmitter?

Last Answer : Power amplifier.

In an AM transmitter with 100% modulation, the voltage of the final RF stage will be

Description : In an AM transmitter with 100% modulation, the voltage of the final RF stage will be

Last Answer : approximately four times the DC supply voltage

The output of problem definition stage is …………….. A) Master Development Plan B) Terms of reference C) Feasibility report D) Final product

Description : The output of problem definition stage is …………….. A) Master Development Plan B) Terms of reference C) Feasibility report D) Final product

Last Answer : B) Terms of reference

VAT is imposed A. Directly on Consumers B. On final Stage of production C. On all stages from Production to final sale D. None of the above

Description : VAT is imposed A. Directly on Consumers B. On final Stage of production C. On all stages from Production to final sale D. None of the above

Last Answer : B. On final Stage of production

Investigation for important bridges may be carried out in which stage a) Technical feasibility study (reconnaissance survey) b) Techno-economic feasibility study (preliminary engineering survey) c) Detailed survey and project report stage (final location survey) d) All the above *

Description : Investigation for important bridges may be carried out in which stage a) Technical feasibility study (reconnaissance survey) b) Techno-economic feasibility study (preliminary engineering survey) c) Detailed survey and project report stage (final location survey) d) All the above *

Last Answer : d) All the above

In the marketing planning cycle, the final stage is: A)implementation of the marketing plan. B)revision or formulation of marketing strategy. C)development or revision of marketing objectives D)assessment of marketing opportunities and resources. E)development or revision of the plan for implementation and control.

Description : In the marketing planning cycle, the final stage is: A)implementation of the marketing plan. B)revision or formulation of marketing strategy. C)development or revision of marketing objectives ... opportunities and resources. E)development or revision of the plan for implementation and control.

Last Answer : A)implementation of the marketing plan.

The final stage of the selling process is the A)closing. B)trial close. C)presentation. D)follow -up. E)overcoming of objections.

Description : The final stage of the selling process is the A)closing. B)trial close. C)presentation. D)follow-up. E)overcoming of objections.

Last Answer : D)follow-up

The final stage in the development of an advertising campaign is A)creating the advertising platform. B)developing the media plan. C)creating the advertising message. D)evaluating the effectiveness of advertising.

Description : The final stage in the development of an advertising campaign is A)creating the advertising platform. B)developing the media plan. C)creating the advertising message. D)evaluating the effectiveness of advertising.

Last Answer : D)evaluating the effectiveness of advertising.

During the final stage of cell division, the mitotic apparatus disappears, the chromosomes become attenuated, the centrioles duplicate and split, the nuclear membrane becomes reconstituted and the nucleolus reappears. This phase of cell division is known as:

Description : During the final stage of cell division, the mitotic apparatus disappears, the chromosomes become attenuated, the centrioles duplicate and split, the nuclear membrane becomes reconstituted and the nucleolus reappears. This ... as: a) prophase (pron: prO-phase) b) metaphase c) anaphase d) telophase

Last Answer : ANSWER: D -- Telophase

VAT is imposed: (1) Directly on Consumer (2) On first stage of production (3) On final stage of production (4) On all stages between production and sale

Description : VAT is imposed: (1) Directly on Consumer (2) On first stage of production (3) On final stage of production (4) On all stages between production and sale

Last Answer : On all stages between production and sale 

Seating the brushes on a D.C. motor is first accomplished using ________________. A. a file for cutting the approximate curvature followed by sandpaper for the final fit B. sandpaper with the motor not operating and then a seating stone while running the machine C. emery paper for the initial cut and crocus cloth for the finishing cut D. course lapping compound, followed by a medium and then a fine grade

Description : Seating the brushes on a D.C. motor is first accomplished using ________________. A. a file for cutting the approximate curvature followed by sandpaper for the final fit B. sandpaper with the motor not ... for the finishing cut D. course lapping compound, followed by a medium and then a fine grade

Last Answer : Answer: B

Manufacturing cost in a chemical company does not include the (A) Fixed charges (B) Plant overheads (C) Direct products cost (D) Administrative expenses

Description : Manufacturing cost in a chemical company does not include the (A) Fixed charges (B) Plant overheads (C) Direct products cost (D) Administrative expenses

Last Answer : (D) Administrative expenses

Most chemical plants use an initial working capital amounting to 10- 20% of the total capital investment. But this percentage may increase to __________ percent in case of seasonal products manufacturing plant. (A) 30 (B) 50 (C) 75 (D) 95

Description : Most chemical plants use an initial working capital amounting to 10- 20% of the total capital investment. But this percentage may increase to __________ percent in case of seasonal products manufacturing plant. (A) 30 (B) 50 (C) 75 (D) 95

Last Answer : (B) 50

In a chemical process plant, the total product cost comprises of manufacturing cost and the (A) General expenses (B) Overhead cost (C) R & D cost (D) None of these

Description : In a chemical process plant, the total product cost comprises of manufacturing cost and the (A) General expenses (B) Overhead cost (C) R & D cost (D) None of these

Last Answer : (A) General expenses

Fixed capital investment of a chemical plant is the total amount of money needed to supply the necessary plant and manufacturing facilities plus the working capital for operation of the facilities. Which of the following components of fixed capital investment requires minimum percentage of it? (A) Electrical installation cost (B) Equipment installation cost (C) Cost for piping (D) Equipment insulation cost

Description : Fixed capital investment of a chemical plant is the total amount of money needed to supply the necessary plant and manufacturing facilities plus the working capital for operation of the facilities. Which of ... (B) Equipment installation cost (C) Cost for piping (D) Equipment insulation cost

Last Answer : (D) Equipment insulation cost

Which of the following relationship is not correct is case of a chemical process plant? (A) Manufacturing cost = direct product cost + fixed charges + plant overhead costs (B) General expenses = administrative expenses + distribution & marketing expenses (C) Total product cost = manufacturing cost + general expenses (D) Total product cost = direct production cost + plant overhead cost

Description : Which of the following relationship is not correct is case of a chemical process plant? (A) Manufacturing cost = direct product cost + fixed charges + plant overhead costs (B) General ... manufacturing cost + general expenses (D) Total product cost = direct production cost + plant overhead cost

Last Answer : (D) Total product cost = direct production cost + plant overhead cost

Give the raw materials, chemical reaction and industrial application for manufacturing of ammonium sulphate.

Description : Give the raw materials, chemical reaction and industrial application for manufacturing of ammonium sulphate. 

Last Answer : Raw Material for Ammonium Sulphate Ammonia + Sulfuric acid Or Coal + carbon monoxide +carbon dioxide + ammonia Or Ammonia + carbon dioxide + gypsum Chemical reaction for Ammonium sulphate ... application Used as or in Fertilizer an additive water treatment and /or cleaning additive