Maximum consumption of copper is in (A) Utensil manufacture (B) Electrical industry (C) Industrial equipment manufacture

Maximum consumption of copper is in
(A) Utensil manufacture
(B) Electrical industry
(C) Industrial equipment manufacture
by

1 Answer

Answer :

(B) Electrical industry
by

Related questions

Maximum consumption of zinc is in (A) Alloying (B) Galvanising (C) Utensil manufacture (D) Electrical industr

Description : Maximum consumption of zinc is in (A) Alloying (B) Galvanising (C) Utensil manufacture (D) Electrical industr

Last Answer : (B) Galvanising

Pick out the wrong statement. (A) Pure rubber is as useless as pure gold as a material of construction (B) Thermal conductivity of aluminium is higher than that of copper; henceit is increasingly used for utensil making(C) Copper has poor weldability(D) Reinforced plastics are made from both thermoplastic as well asthermosetting plastics

Description : Pick out the wrong statement. (A) Pure rubber is as useless as pure gold as a material of construction (B) Thermal conductivity of aluminium is higher than that of copper; henceit is ... has poor weldability (D) Reinforced plastics are made from both thermoplastic as well as thermosetting plastics

Last Answer : (B) Thermal conductivity of aluminium is higher than that of copper; henceit is increasingly used for utensil making

Maximum consumption of lead is in the manufacture of (A) Storage batteries (B) Solder alloys

Description : Maximum consumption of lead is in the manufacture of (A) Storage batteries (B) Solder alloys

Last Answer : (A) Storage batteries

Maximum consumption of polymers is in (A) Electrical insulation (B) Toys making (C) Coating and films (D) Packaging

Description : Maximum consumption of polymers is in (A) Electrical insulation (B) Toys making (C) Coating and films (D) Packaging

Last Answer : (C) Coating and films

Maximum consumption of limestone is in the __________ industry. (A) Iron and steel (B) Cement (C) Glass (D) Fertiliser

Description : Maximum consumption of limestone is in the __________ industry. (A) Iron and steel (B) Cement (C) Glass (D) Fertiliser

Last Answer : (D) Fertiliser

Pick out the wrong statement. (A) Fibrillation of fibre during paper manufacture is done to develop the strength in paper (B) Alkali consumption in digestion/cooking of bamboo is measured in terms of permanganate number (C) Bagasse fibre contains both lignin & cellulose (D) Presence of sodium sulphate in pulp makes the pulp bleachability poor

Description : Pick out the wrong statement. (A) Fibrillation of fibre during paper manufacture is done to develop the strength in paper (B) Alkali consumption in digestion/cooking of bamboo is measured in terms ... both lignin & cellulose (D) Presence of sodium sulphate in pulp makes the pulp bleachability poor

Last Answer : (D) Presence of sodium sulphate in pulp makes the pulp bleachability poor

Limestone is added in the blast furnace (during pig iron manufacture) to (A) Form slag by combining with impurities (B) Supply heat by undergoing exothermic reaction with impurities (C) Reduce the coke consumption (D) Reduce slag viscosity

Description : Limestone is added in the blast furnace (during pig iron manufacture) to (A) Form slag by combining with impurities (B) Supply heat by undergoing exothermic reaction with impurities (C) Reduce the coke consumption (D) Reduce slag viscosity

Last Answer : Option A

If you were to get a tattoo of some sort of food (fruit, entree, cooking utensil, etc.) what would it be?

Description : If you were to get a tattoo of some sort of food (fruit, entree, cooking utensil, etc.) what would it be?

Last Answer : I was going to pick this but if it’s food precisely…I don’t really see myself sporting a tatoo of a pizza pop, T Bone steak or a sandwich from Subway…but it might still look awesome on my back. :D

When I was a kid, my grandma set my place at the table with knife, fork, and spoon plus this little flat sided utensil that you used to push beans and peas onto your fork. What was that called?

Description : When I was a kid, my grandma set my place at the table with knife, fork, and spoon plus this little flat sided utensil that you used to push beans and peas onto your fork. What was that called?

Last Answer : Perhaps a misused crumber or master butter knife? I’ve never heard of such a thing otherwise.

Do you think the utensil you use affects how your food tastes?

Description : Do you think the utensil you use affects how your food tastes?

Last Answer : I really love how the McDonald’s hot fudge sundaes taste with the plastic spoon. But that’s about the only thing I can think of that tastes better with take-out utensils.

Would you recommend a specific pen, pencil, writing utensil?

Description : Would you recommend a specific pen, pencil, writing utensil?

Last Answer : Are we talking about art, or writing?

Can you store the lemon pickle in an aluminium utensil? Explain. -History

Description : Can you store the lemon pickle in an aluminium utensil? Explain. -History

Last Answer : No, we cannot store lemon pickle in an aluminium utensil because aluminium is a metal and metals readily react with acids to produce hydrogen. When aluminium comes in contact with lemon, which is acidic, would react to give hydrogen and the pickles will be spoiled.

What kitchen utensil starting with s?

Description : What kitchen utensil starting with s?

Last Answer : saucepansievespoonspatulaand so on ...

Should you use the same utensil to stir or serve a cooked meal that was used to prepare the raw ingredients?

Description : Should you use the same utensil to stir or serve a cooked meal that was used to prepare the raw ingredients?

Last Answer : Need answer

What type of material are the best kitchen utensil made from?

Description : What type of material are the best kitchen utensil made from?

Last Answer : Wood can be an alternative to your plastic kitchen utensils. However aluminum is suggested often since it is made of durable material, can be easily cleaned and doesn't affect the food in it.

What type of kichen utensil its like a humming bird's beak?

Description : What type of kichen utensil its like a humming bird's beak?

Last Answer : A tweeter

An insulation resistance test is performed on a particular piece of electric equipment. In addition to the resistance reading, what information listed below should be entered in the electrical log? A. The maximum allowable operating temperature of the machine. B. The temperature of the machine at the time the resistance reading was taken. C. The normal temperature rise of the machine. D. The complete nameplate data from the resistance test instrument used to obtain the reading.

Description : An insulation resistance test is performed on a particular piece of electric equipment. In addition to the resistance reading, what information listed below should be entered in the electrical log? A. ... D. The complete nameplate data from the resistance test instrument used to obtain the reading.

Last Answer : Answer: B

Catalyst used during the manufacture of 'Vanaspati Ghee' is (A) Zinc (B) Nickel (C) Platinum (D) Copper

Description : Catalyst used during the manufacture of 'Vanaspati Ghee' is (A) Zinc (B) Nickel (C) Platinum (D) Copper

Last Answer : (B) Nickel

The common pollutant generated in chlor-alkali industry and battery manufacture is (A) Mercury (B) Brine (C) Phosphate (D) None of these

Description : The common pollutant generated in chlor-alkali industry and battery manufacture is (A) Mercury (B) Brine (C) Phosphate (D) None of these

Last Answer : (A) Mercury

In chamber process of sulphuric acid manufacture in industry, the gas phase oxidation of SO2 to SO3 is accomplished by a __________ reaction. (A) Non-catalytic homogeneous (B) Non-catalytic heterogeneous (C) Catalytic homogenous (D) Catalytic heterogeneous

Description : In chamber process of sulphuric acid manufacture in industry, the gas phase oxidation of SO2 to SO3 is accomplished by a __________ reaction. (A) Non-catalytic homogeneous (B) Non-catalytic heterogeneous (C) Catalytic homogenous (D) Catalytic heterogeneous

Last Answer : (C) Catalytic homogenous

What are the top companies that manufacture water skiing equipment and where are they located?

Description : What are the top companies that manufacture water skiing equipment and where are they located?

Last Answer : Cobra makes the best water skiing equipment and have some of the best prices. They are located in California and are conveniently located next to the beach.

Which NTC memorandum circular governs the rules and regulations about the manufacture, acquisition, sale and service of radio communication equipment? A. MC No. 2-05-88 B. MC No. 2-04-88 C. MC No. 2-07-88 D. MC No. 2-09-88

Description : Which NTC memorandum circular governs the rules and regulations about the manufacture, acquisition, sale and service of radio communication equipment? A. MC No. 2-05-88 B. MC No. 2-04-88 C. MC No. 2-07-88 D. MC No. 2-09-88

Last Answer : A. MC No. 2-05-88

Which of the following is not an industrial screening equipment? (A) Sharpies centrifuge (B) Vibrating screen (C) Grizzly (D) Trommel

Description : Which of the following is not an industrial screening equipment? (A) Sharpies centrifuge (B) Vibrating screen (C) Grizzly (D) Trommel

Last Answer : (A) Sharpies centrifug

Preparation of butter, ghee by a household for their own use is a part of : (1) own-account production (2) household capital formation (3) industrial production (4) consumption

Description : Preparation of butter, ghee by a household for their own use is a part of : (1) own-account production (2) household capital formation (3) industrial production (4) consumption

Last Answer : (4) consumption Explanation: The processing of agricultural products; the production of grain by threshing: the production of flour by milling; the curing of skins and the production of leather ... production of baskets and mats; etc, come under processing of primary commodities for own consumption.

According to……………… ―energy audit‖ means verification, monitoring, analysis of use of energy including submission of technical report containing recommendations for improving energy efficiency with cost benefit analysis and an action plan to reduce energy consumption a) Energy conservation act 2001 b) Industrial act 1946 c) Factory act 1947 d) none of act

Description : According to -energy audit means verification, monitoring, analysis of use of energy including submission of technical report containing recommendations for improving energy efficiency with cost benefit analysis ... act 2001 b) Industrial act 1946 c) Factory act 1947 d) none of act

Last Answer : Energy conservation act 2001

A waste heat recovery system in industrial process has been key to reduce ....... Consumption. a) Coal b) Fuel c) Biogas d) Oil

Description : A waste heat recovery system in industrial process has been key to reduce ....... Consumption. a) Coal b) Fuel c) Biogas d) Oil

Last Answer : Fuel

Industrial products are A)purchased for personal consumption. B)frequently purchased for both their functional aspects and their psychological rewards. C)traditionally classified according to their characteristics and intended uses. D)not purchased by nonbusiness organisations.

Description : Industrial products are A)purchased for personal consumption. B)frequently purchased for both their functional aspects and their psychological rewards. C)traditionally classified according to their characteristics and intended uses. D)not purchased by nonbusiness organisations.

Last Answer : C)traditionally classified according to their characteristics and intended uses.

Preparation of butter, ghee by a household for their own use is a part of : (1) own-account production (2) household capital formation (3) industrial production (4) consumption (

Description : Preparation of butter, ghee by a household for their own use is a part of : (1) own-account production (2) household capital formation (3) industrial production (4) consumption (

Last Answer : consumption

The ratio of the total amount of heat that equipment can remove from the indoors to travel and amount of energy consumed by the equipment is known as A) Energy performance ratio (EPR). C) Energy efficiency RATIO (EER). B) Energy consumption ratio (ECR). D) None of the above

Description : . The ratio of the total amount of heat that equipment can remove from the indoors to travel and amount of energy consumed by the equipment is known as A) Energy performance ratio (EPR). C) Energy efficiency RATIO (EER). B) Energy consumption ratio (ECR). D) None of the above

Last Answer : Energy efficiency RATIO (EER).

What are the benefits or the advantages of waste heat recovery units (WHRU)? a) Reduced Pollution b) Reduced equipment sizes c) Reduced auxiliary energy consumption. d) All of the above

Description : What are the benefits or the advantages of waste heat recovery units (WHRU)? a) Reduced Pollution b) Reduced equipment sizes c) Reduced auxiliary energy consumption. d) All of the above

Last Answer : All of the above

Benefits of Waste Heat Recovery a. Reduction in pollution b. Reduction in equipment sizes c. Reduction in auxiliary energy consumption d. All of the above

Description : Benefits of Waste Heat Recovery a. Reduction in pollution b. Reduction in equipment sizes c. Reduction in auxiliary energy consumption d. All of the above

Last Answer : Ans:- d. All of the above

The substances used in the manufacture of stainless steel are 1. Chromium 2. Iron 3. Copper 4. Steel The correct answers are: (a) 1 and 4 (b) 1, 2, 3 and 4 (c) 2, 3 and 4 (d) 1, 2 and 4

Description : The substances used in the manufacture of stainless steel are 1. Chromium 2. Iron 3. Copper 4. Steel The correct answers are: (a) 1 and 4 (b) 1, 2, 3 and 4 (c) 2, 3 and 4 (d) 1, 2 and 4

Last Answer : Ans:(a)

Which ofthe following materials is used in the manufacture of resistance grids to be used in the starters of large motors ? (a) Copper (b) Aluminium (c) Steel (d) Cast-iron

Description : Which ofthe following materials is used in the manufacture of resistance grids to be used in the starters of large motors ? (a) Copper (b) Aluminium (c) Steel (d) Cast-iron

Last Answer : (d) Cast-iron

Is every manufacture industry has their supply chain management certification?

Description : Is every manufacture industry has their supply chain management certification?

Last Answer : While ever manufacturing company or industry works to master the management of their supply chain, there is no universal requirement that they have their staff certified in the management of products. Some ... (Canada) may have regulations to a degree or affect, there is no universal requirement.

Chemical engineering plant cost index is used for finding the present cost of a particular chemical plant, if the cost of similar plant at some time in the past is known. The present cost of the plant = original cost × (index value at present/ index value at time original cost was obtained). The most major component of this cost index is (A) Fabricated equipment and machinery (B) Process instruments and control (C) Pumps and compressor (D) Electrical equipments and material

Description : Chemical engineering plant cost index is used for finding the present cost of a particular chemical plant, if the cost of similar plant at some time in the past is known. The present cost of ... (B) Process instruments and control (C) Pumps and compressor (D) Electrical equipments and material

Last Answer : (A) Fabricated equipment and machinery

In an ordinary chemical plant, electrical installation cost may be about (A) 10-15% of purchased equipment cost (B) 3-10% of fixed capital investment (C) Either (A) or (B) (D) Neither (A) nor (B)

Description : In an ordinary chemical plant, electrical installation cost may be about (A) 10-15% of purchased equipment cost (B) 3-10% of fixed capital investment (C) Either (A) or (B) (D) Neither (A) nor (B)

Last Answer : (C) Either (A) or (B)

Fixed capital investment of a chemical plant is the total amount of money needed to supply the necessary plant and manufacturing facilities plus the working capital for operation of the facilities. Which of the following components of fixed capital investment requires minimum percentage of it? (A) Electrical installation cost (B) Equipment installation cost (C) Cost for piping (D) Equipment insulation cost

Description : Fixed capital investment of a chemical plant is the total amount of money needed to supply the necessary plant and manufacturing facilities plus the working capital for operation of the facilities. Which of ... (B) Equipment installation cost (C) Cost for piping (D) Equipment insulation cost

Last Answer : (D) Equipment insulation cost

Which of the following statements about continuous cardiac output monitoring are true? A. Continuous cardiac output monitoring may unmask events not detected by intermittent cardiac output measurements. B. Continuous cardiac output monitoring by the thermodilution method requires continuous infusion of fluid injectate at a constant rate and temperature. C. The major advantage of the Fick method over the thermodilution method of calculating cardiac output is that it is noninvasive, requiring only the determination of oxygen consumption by respiratory gas analysis. D. The technique of thoracic electrical bioimpedance utilizes sensors to determine stroke volume by detecting changes in resistance to a small, applied alternating current.

Description : Which of the following statements about continuous cardiac output monitoring are true? A. Continuous cardiac output monitoring may unmask events not detected by intermittent cardiac output measurements. ... stroke volume by detecting changes in resistance to a small, applied alternating current.

Last Answer : Answer: AD DISCUSSION: Various techniques are available to measure cardiac output continuously. The advantages of continuous cardiac output monitoring, as compared with intermittent methods, are (1) ... function of the stroke volume, which then can be used to calculate the cardiac output

Superconducting materials are being used in the Superconducting Super Collider to: w) cool the particles. x) minimize electrical power consumption. y) maximize the acceleration potentials. z) provide radiation shielding.

Description : Superconducting materials are being used in the Superconducting Super Collider to: w) cool the particles. x) minimize electrical power consumption. y) maximize the acceleration potentials. z) provide radiation shielding.

Last Answer : ANSWER: X -- MINIMIZE ELECTRICAL POWER CONSUMPTION.

A manufacturing industry plans to improve its energy performance under PAT through implementation of an energy conservation scheme. After implementation, calculate the Plant Energy Performance (PEP) with 2015-16 as the reference year. What is your inference? Given that:  The current year (2016-17 ) Annual Production – 28,750 T ,  Current year (2016-17 ) Annual Energy Consumption– 23,834 MWh,  Reference year (2015-16 ) production - 34,000 T,  Reference year (2015-16 ) Energy consumption - 27,200 MWh.

Description : A manufacturing industry plans to improve its energy performance under PAT through  implementation of an energy conservation scheme. After implementation, calculate the  Plant Energy Performance (PEP) with 2015-16 as the ... 34,000 T,   Reference year (2015-16 ) Energy consumption - 27,200 MWh.

Last Answer : Production factor (PF) = 28750/34000 = 0.846 …………………….1 mark Ref year equivalent energy (RYEE) = Ref Year Energy Use (RYEU) x PF   = 27,200 x 0.846= 23011MWh

Which of the anthropogenic activity accounts for more than 2/3rd of global water consumption? (A) Agriculture (B) Hydropower generation (C) Industry (D) Domestic and Municipal usage

Description : Which of the anthropogenic activity accounts for more than 2/3rd of global water consumption? (A) Agriculture (B) Hydropower generation (C) Industry (D) Domestic and Municipal usage

Last Answer : (A) Agriculture

Maximum use of petroleum coke is in (A) Adsorption refining operation (B) Fuel gas manufacture (C) Carbon electrode manufacture (D) Iron ore reduction

Description : Maximum use of petroleum coke is in (A) Adsorption refining operation (B) Fuel gas manufacture (C) Carbon electrode manufacture (D) Iron ore reduction

Last Answer : (C) Carbon electrode manufacture

Out of the following processes of paper pulp manufacture, the maximum corrosion problem in digestion & handling equipments is encountered in the __________ process. (A) Mechanical (B) Sulphate/Kraft (C) Sulphite (D) Neutral sulphite semi-chemical

Description : Out of the following processes of paper pulp manufacture, the maximum corrosion problem in digestion & handling equipments is encountered in the __________ process. (A) Mechanical (B) Sulphate/Kraft (C) Sulphite (D) Neutral sulphite semi-chemical

Last Answer : (D) Neutral sulphite semi-chemical

From the following which material handling equipment is used in Robot centered layout of FMS a.Industrial Robot b.Conveyor systems c.Rail guided vehicle system d.None of the above

Description : From the following which material handling equipment is used in Robot centered layout of FMS a.Industrial Robot b.Conveyor systems c.Rail guided vehicle system d.None of the above

Last Answer : a.Industrial Robot

If I rent other industrial equipment along with an aerial lift, is there a company that will discount the rental fee?

Description : If I rent other industrial equipment along with an aerial lift, is there a company that will discount the rental fee?

Last Answer : The aerial lift is fairly expensive equipment to rent. If you are renting other equipments too from the same company then you definitely deserve to get higher discounts and most of the companies ... you high discounts. It also depends on your payment terms, reputation and continuity of rental.

What is the best way to advertise a business selling industrial equipment?

Description : What is the best way to advertise a business selling industrial equipment?

Last Answer : A good way to advertise a new company that is sell industrial equipment would be to create some flyers for your business. After you make the flyers you could look up companies you think may be interested in your product and mail them your flyers.

Trade show exhibits where I can see industrial supplies and equipment.?

Description : Trade show exhibits where I can see industrial supplies and equipment.?

Last Answer : Their are always different types of trade shows that exhibit different interests. Frequently, they have home improvement/constuction trade shows which carry industrial supplies.

Looking for post driver jobs carrying industrial supplies and equipment.?

Description : Looking for post driver jobs carrying industrial supplies and equipment.?

Last Answer : Yes, there are post driver jobs carrying industrial supplies and equipment located in the Las Vegas area. For more details check out some of the following sites http://www.merchantcircle ... /Page.Industrial.Supply.702-735-1120 and http://www.manta.com/mb_53_E6_CKV/machinery_equipment/las_vegas_nv.

Where is the best place to look for industrial supplies and equipment for hvlp spray system installation.?

Description : Where is the best place to look for industrial supplies and equipment for hvlp spray system installation.?

Last Answer : The best place to look for hvlp spray system project industrial supplies and equipment would be at www.grainger.com. Grainger is a retailer who uses catalog and internet ordering to provide rapid access to customers seeking industrial supplies.

Where is the best place to look for industrial supplies and equipment?

Description : Where is the best place to look for industrial supplies and equipment?

Last Answer : When looking for something such as industrial supplies and equipment, it is best to go in store to look for what you want. The store helpers will be able to assist you.